How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

Similar Messages

Report to get data for current_week+1 till 13th week

Hi Friends,
I have two tables
BACKLOG_WEEK_AFTER_ATP (LE)
BACKLOG_ATP_GT_CW (RE)
** First I have to query whats the current week and year and it should come in this format ---- 2011-WK30
columns in table BACKLOG_WEEK_AFTER_ATP are:
ITEM_NUMBER      QUANTITY
1N5418                 20
1N5614                 30
1N5806SM               10
1N5811                  0
2PFF6                  60columns in table BACKLOG_ATP_GT_CW are:
ITEM_NUMBER     QUANTITY        YEAR_WEEK
1N5418                30        2011-WK30
1N5418                 5        2011-WK31
1N5614                30        2011-WK32
1N5806SM              30        2011-WK33
1N5811                20        2011-WK32
3EX473K1              20        2011-WK30My report should look like
ITEM_NUMBER    2011-WK30 2011-WK31 2011-WK32 2011-WK33 ...............till 13th week
1N5418                10         -5         -5         -5 ...............till 13t week
1N5614                30         30          0          0 ................till 13th week
1N5806SM              10         10         10         20 ................till 13th week
1N5811                 0          0         20         20 ................till 13th week
2PFF6                 60         60         60         60 ................till 13th week
3EX473K1              20         20         20         20 ................till 13th weekTo get this report i have these conditions to keep in mind.
1) If item_number not present in LE table and present in RE table then repeat what it is in RE table till 13th week
2) If item_number not present in RE table and present in LE table then repeat what it is in LE table till 13th week
3) If item_number present in LE and also present in RE table then do subtraction for RE - LE for that particular item_number till 13th week.
4) If item_number is there in LE table but not present in RE table for current_week+1(today week comes as 29th week) then repeat the same which is there in LE table. If item is found in RE table for (example 32th week) then subtract RE -LE for that particular item_number
Thanks in advance.
Regards

User_Apex wrote:
Hi Friends,
I have two tables
BACKLOG_WEEK_AFTER_ATP (LE)
BACKLOG_ATP_GT_CW (RE)
** First I have to query whats the current week and year and it should come in this format ---- 2011-WK30
columns in table BACKLOG_WEEK_AFTER_ATP are:
ITEM_NUMBER     QUANTITY
1N5418                     20
1N5614                     30
1N5806SM                 10
1N5811                       0
2PFF6                        60columns in table BACKLOG_ATP_GT_CW are:
ITEM_NUMBER     QUANTITY        YEAR_WEEK
1N5418                     30                2011-WK30
1N5418                     5                 2011-WK31
1N5614                     30                2011-WK32
1N5806SM                 30                2011-WK33
1N5811                      20                2011-WK32
3EX473K1                   20               2011-WK30My report should look like
ITEM_NUMBER    2011-WK30 2011-WK31 2011-WK32 2011-WK33 ------ till 13th week
1N5418                 10             -5                -5              -5     ...............till 13t week
1N5614                 30             30               0                0     ................till 13th week
1N5806SM              10            10              10              20    ................till 13th week
1N5811                   0              0               20              20   ................till 13th week
2PFF6                     60            60              60               60 ................till 13th week
3EX473K1                20             20              20              20 ................till 13th weekTo get this report i have these conditions to keep in mind.
1) If item_number not present in LE table and present in RE table then repeat what it is in RE table till 13th week
2) If item_number not present in RE table and present in LE table then repeat what it is in LE table till 13th week
3) If item_number present in LE and also present in RE table then do subtraction for RE - LE for that particular item_number till 13th week.
4) If item_number is there in LE table but not present in RE table for current_week+1(today week comes as 29th week) then repeat the same which is there in LE table. If item is found in RE table for (example 32th week) then subtract RE -LE for that particular item_numberNot an APEX question: use {forum:id=75} forum.
Query to get data for current week+13

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

Balance sheet required for current quarter and previous quarter

Hi Guys,
I am using 0FIGL_C10 cube for balance sheet report,i need to create balances for current quarter and previous quarter.
user will enter the fisper, based on fisper it has to show the current quarter and previous quarter balance.
how to calculate the quarter using fisper.

you can use offset with ranges.
or
just offset of -1 , -2 & -3 seperately in 3 selections and add it in one column in formula (this will give u current quarter).
similarly offset of -4, -5 , -6 will give u previous quarter result.
total of 6 selection and 2 formulas. hide all selections from display.

Get data for current month in VC from query - Urgent

Hi all,
I have designed a query for cube FIAR_C03 for overdue items and query output contains customer, net due date, document date, fiscal year period and amount. I want a chart for that query in VC that only contains those items in which net due date is in current month. How can i do that?
Where I can place the condition to display only those items in vc in which net due date is in current month and how ?
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi Aisha,
It is possible to do with following steps:
1. In Query Design make your field 'Net Due' filter with variable for date input (0CALMONTH for example where your date should be this format MMYYYY). Test your query and see if you input a month/year date it would would work;
2. Build one table from output of your query (choose fields);
3. In Visual Composer, drag your query into your board and from 'Varaiables' port (NOT FROM INPUT) drag a line to create a Start point. As soon you realease to create 'Start' a box will ask which fields you want. Choose your date as field;
4. Select the line between Start point a query. In Input Field assigned the following formula (DSTR(NOW(),'MMYYYY') *
5. Deploy your model
at this formula I said: transform NOW(), current date, in Text with format MMYYYY (012002 for example).
It works!
Assigned points if was helpful.
Kind Regards,
Gilson Teixeira

How to get data for custom feilds for standard datasource

i have extracted CRM standard datasource 0CRM_OPPT_I.
In RSA6 i slected feilds which i want to trnasfer to B Iand i also added some custom feilds.
and then i went to RSA5 and i activated datasource.then i went to RSA3and i extracted.
In rSA3 selection screen all the custom feilds are selcted.
after extraction if i go to LIST,only some of the custom feilds data is displaying remaining feilds displayed as blank data
please tel me how to get data
Thanks in advance
HP

Hi Hari,
Sorry for late reply.
Once you have done the proper mapping by using the transaction BWA1
you need to write the BADI code which can be accesible from the following path:
Go to transaction SPRO
SAP Implementation guide ->Integration with other mySAP components ->Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM) ->
Settings for BW adapter->Execute Badi :BW adapter :Enhancement of datasources in messaging flow.
Select you the datasource enhancement implementation it will open the BADI Implementation..
go To interface tab and double click on the method..it takes you to the ABAP screen where you need to write the logic to populate the custom fields..
Please feel free to mail back if you have any quries.
All the Best..
Thanks
SK

Parameter for current year and previous year

Hi all,
I currently have 2 reports where the query is the same except in the where clause I have it filtered to current year and previous year based on the List_Date. I would like to make this one report with a parameter of Current or Previous year.
Would I create 2 more datasets one for current and another for previous? I would think there is a easier way. Any help or direction would be great.

If you define a parameter in SSRS, you can use it's value in your query. Just make sure the parameter name, and CASE (SSRS is case sensitive when it comes to parameters) are the same in SSRS and your query. There's a parameter tab on the dataset properties.
It SHOULD auto fill, but it never hurts to check, just in case.
Don't forget to mark helpful posts, and answers. It helps others to find relevant posts to the same question.
Yes it did auto fill the parameter tab in the dataset and I get a parameter to enter the year when I preview the report. Still a little confused on how I do current or previous year. Are the next steps what I need to do?
@yearParam parameter:
1) Create Available or Default values
2) Current and Previous year as label
3) For Value do I need to use a expression for current year =Year(now()) and previous Year?
4) Add a filter on the tablix for list_date?

Query to get data for current week+13

Hi Friends,
I have two tables
BACKLOG_WEEK_AFTER_ATP (LE)
BACKLOG_ATP_GT_CW (RE)
** First I have to query whats the current week and year and it should come in this format ---- 2011-WK30
columns in table BACKLOG_WEEK_AFTER_ATP are:
ITEM_NUMBER      QUANTITY
1N5418                 20
1N5614                 30
1N5806SM               10
1N5811                  0
2PFF6                  60columns in table BACKLOG_ATP_GT_CW are:
ITEM_NUMBER     QUANTITY        YEAR_WEEK
1N5418                30        2011-WK30
1N5418                 5        2011-WK31
1N5614                30        2011-WK32
1N5806SM              30        2011-WK33
1N5811                20        2011-WK32
3EX473K1              20        2011-WK30My report should look like
ITEM_NUMBER    2011-WK30 2011-WK31 2011-WK32 2011-WK33 ...............till 13th week
1N5418                10         -5         -5         -5 ...............till 13t week
1N5614                30         30          0          0 ................till 13th week
1N5806SM              10         10         10         20 ................till 13th week
1N5811                 0          0         20         20 ................till 13th week
2PFF6                 60         60         60         60 ................till 13th week
3EX473K1              20         20         20         20 ................till 13th weekTo get this report i have these conditions to keep in mind.
1) If item_number not present in LE table and present in RE table then repeat what it is in RE table till 13th week
2) If item_number not present in RE table and present in LE table then repeat what it is in LE table till 13th week
3) If item_number present in LE and also present in RE table then do subtraction for RE - LE for that particular item_number till 13th week.
4) If item_number is there in LE table but not present in RE table for current_week+1(today week comes as 29th week) then repeat the same which is there in LE table. If item is found in RE table for (example 32th week) then subtract RE -LE for that particular item_number
Thanks in advance.
Regards

Hello,
If you don't need the PIVOT display, then this may help you :
with le as
(select '1N5418' item_number, 20 quantity from dual union all
select '1N5614' item_number, 30 quantity from dual union all
select '1N5806SM' item_number, 10 quantity from dual union all
select '1N5811' item_number, 0 quantity from dual union all
select '2PFF6' item_number, 60 quantity from dual ),
re as
(select '1N5418' item_number, 30 quantity, '2011-WK30' year_week from dual union all
select '1N5418' item_number, 5 quantity, '2011-WK31' year_week from dual union all
select '1N5614' item_number, 30 quantity, '2011-WK32' year_week from dual union all
select '1N5806SM' item_number, 30 quantity, '2011-WK33' year_week from dual union all
select '1N5811' item_number, 20 quantity, '2011-WK32' year_week from dual union all
select '3EX473K1' item_number, 20 quantity, '2011-WK30' year_week from dual
row_gen as (
select item_number, calc_year_week,
       row_number() over(partition by item_number order by calc_year_week) rn
from
    (select le.item_number from le union select item_number from re) item,
    (select to_char(level*7+sysdate,'YYYY-"WK"WW') calc_year_week from dual connect by level<=13) week)
select item_number, calc_year_week, calc_qty
from row_gen, le, re
where row_gen.item_number=le.item_number(+)
and row_gen.item_number=re.item_number(+)
and row_gen.calc_year_week=re.year_week(+)
model
partition by (row_gen.item_number)
dimension by (rn)
measures (calc_year_week, year_week, le.quantity le_qty,re.quantity re_qty,0 calc_qty )
rules (
calc_qty[1] =
    case when re_qty[cv()] is null then le_qty[cv()]
    when le_qty[cv()] is null then re_qty[cv()]
    else re_qty[cv()]-le_qty[cv()]
end,
calc_qty[rn>1] order by rn =
    case when re_qty[cv()] is null then calc_qty[cv()-1]
    else re_qty[cv()] - calc_qty[cv()-1]
    end           )
order by 1,2;I am not sure this is the simplest way to do it, but the results seem to match your example.
Regards,
Sylvie
Edited by: Troll35 on Jul 19, 2011 3:08 PM

How to get Date value from database and display them in a drop down list?

Hello.
In my Customers table, I have a column with Date data type. I want to create a form in JSP, where visitors can filter Customers list by year and month.
All I know is this piece of SQL that is convert the date to the dd-mm-yyyy format:
SELECT TO_CHAR(reg_date,'dd-mm-yyyy') from CustomersAny ideas of how this filtering possible? In my effort not to sound like a newbie wanting to be spoonfed, you can provide me link to external notes and resources, I'll really appreciate it.
Thanks,
Rightbrainer.

Hi
What part is your biggest problem?? I am not experienced in getting data out of a database, but the way to get a variable amount of data to show in a drop down menu, i have just messed around with for some time and heres how i solved it... In my app, what i needed was, a initial empty drop down list, and then using input from a text-field, users could add elements to a Vector that was passed to a JComboBox. Heres how.
package jcombobox;
import java.awt.*;
import java.awt.event.*;
import java.util.Vector;
import javax.swing.*;
public class Main extends JApplet implements ActionListener {
    private Vector<SomeClass> list = new Vector<SomeClass>();
    private JComboBox dropDownList = new JComboBox(list);
    private JButton addButton = new JButton("add");
    private JButton remove = new JButton("remove");
    private JTextField input = new JTextField(10);
    private JPanel buttons = new JPanel();
    public Main() {
        addButton.addActionListener(this);
        remove.addActionListener(this);
        input.addActionListener(this);
        buttons.setLayout(new FlowLayout());
        buttons.add(addButton);
        buttons.add(remove);
        add(dropDownList, "North");
        add(input, "Center");
        add(buttons, "South");
    public void actionPerformed(ActionEvent e) {
        if (e.getSource() == addButton) {
            list.addElement(new SomeClass(input.getText()));
            input.setText("");
        } else if (e.getSource() == remove) {
            int selected = dropDownList.getSelectedIndex();
            dropDownList.removeItemAt(selected);
    public void init(String[] args) {
        setSize(400,300);
        getContentPane().setLayout(new BorderLayout());
        getContentPane().add(new Main());
}And that "SomeClass" is show here
package jcombobox;
public class SomeClass {
    private String text;
    public SomeClass(String input) {
        text = input;
    public String toString() {
        return text;
}One of the things i struggled a lot with was to get the dropdown menu to show some usefull result. If the list just contains class references it will show the memory code that points to that class. Thats where the toString cones in handy. But it took me some time to figure that one out, a laugh here is welcome as it should have been obvious :-)
When the app is as simple as this one, using a <String> vector would have been easier, but this is just to demonstrate how to place classes in a vector and get some usefull info out of it, hope this answered some of your question :-)
The layout might have been easier to write, than using the toppanel created by the JApplet and then the two additional JPanels, but it was just a small app brewed together in 15 minutes. Please comments on my faults, so that i can learn of it.
If you need any of the code specified more, please let me know. Ill be glad to,

How to get data for Planning reports in 'CRM Interactive BI Reports' ?

Hi ,
Can you please let me know how can we get the data for the Planning Reports?
Do we have any specific data in the BI system related to Planninin Reports?
Planning Reports are :
1. Plan/Actual Comparison
2. Plan/Actual Monitor
3. Plan/Actual Analysis
4. Plan/Actual Compar. (YTD/YTG)
5. Sales Volume Forecast
6. Plan/Actual Net Revenue/Cust.
7. Plan/Actual Net Revenue/Prod.
Thanks
Ravi

We should have a separate BI system to get the data for all these reports.
Regards
Ravi

How to get data from pdf file and send contents of the pdf file to R/3

Hi, experts,
Action:
1. Make a pdf forms (interactive form) with inputfield named A_inputfield in the webdynpro application and run the webdynpro application.
2. In the IE, click the save button in the pdf interactive form and save the pdf to local disk,ex: C disk. Close the IE browser.
3. Open the pdf interactive form from the local C disk and type "aaa" to the A_inputfield.
4. I want to save the "aaa" to the R/3 system using webdynpro or using other tools . How can I do it?
First way:
If I use webdynpro application to save the content of the pdf, I don't find a way mapping or binding the content to a context of a view. So I don't think this way is unadvisable.
Second way:
Adding a button "submit" in the pdf forms when create the pdf form. Runing the webdynpro application, save the pdf to local disk,ex: C disk. Opening the pdf interactive form from the local c disk and typing "aaa" to the A_inputfield, click the "submit" button to save the content. Of course, I need to finish the code for clicking "submit" button. But I don't know how to write these codes and where to write these codes. Do you give me some advise ?
Best regards,
tao

Hi, Abhimanyu L,
Thanks a lot for your help. Your answer can give me large developmental.:)
I find http://help.sap.com/saphelp_erp2005/helpdata/en/67/fae9421dd80121e10000000a155106/content through searching google for CL_WD_ADOBE_SERVICES class. But I don't find any exmples for the class. Do you give me some hint for some exmples for the class?
Best regards,
tao
(You can reply back to me via e-mail if you think we should discuss this internally at [email protected] or [email protected])

How to get data from a pointer to an array using dlportio?

I use DLPORTIO.DLL to access the parallel port on a WinXP. The purpose is to read data coming from an fpga.
The transfer rate is quite high (more than 500kB/s).
DLPORTIO.DLL can buffer data from the parallel port.
I would like to use this fonctionality to speed up the data transfer by ready 16 x 8 bits that have been buffered. I get the pointer to the element from the dll. 8bits means U8 in Labview and, of course, 16 => U16 and 32bits => U32. But what to connect when I want 128bits??? How to use the pointer cominf from the dll and say to Labview it is the pointer to the first element of my 16 element array??
Thanks to all
Dai Tran Duy
Dai
LV 7.1 - WIN XP - RT - FP
Attachments:
dlportio.zip ‏852 KB

LabVIEW does not have a 128 bit numeric so you will need to create a work around of sorts. What I would suggest is creating some wrapper dll functions. These funcitons would take say an array of U8s from LabVIEW, convert them into your 128 bit number and then call your dll with that.
In addition take a look at the manual on exteranl code in LabVIEW, Using External Code in LabVIEW, which discusses how to pass arrays to a dll. In addition there is a shipping example in LabVIEW 7.0 that shows how to pass all sorts of LabVIEW and C data types. The example even includes C code snipits.

How to get imovies out of iPad and burn them using iDVD or Movie Maker?

Has anyone figured out how to get the iMovies created on the iPad out and onto a computer to burn them onto iDVD or MovieMaker?

Just export the movie to your camera roll and sync it back to your computer.

How to get the list of parameter and set them using RESTFul WS for a Crystal Report

Hi All,
I am able to schedule a Crystal report using following POST Restful call - http://localhost:6405/biprws/infostore/4738/scheduleForms/now and with a request xml body. But report is failing because I am not passing the parameter.
But I need pass parameters/prompts to the Crystal report to execute successfully.
What is the request XML to pass the parameter for the report?
I was able to do this for WEBI reports but I am not able to find any way to do this for Crystal reports?
Any help on this matter is really appreciated.

Hi Venki
Please have a look at:
How to pass parameters and generate the report using RESTful API in VB.net
This is also described in the Developer Help files:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_webi_restful_ws_en.pdf
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to get data for current week and previous week using customer exit in Bex.

Similar Messages

Maybe you are looking for