Business View Connector Error When Developing from Client PC
We upgraded from CE10 to BOXI 3.1 using Crystal Reports 2008 with Business Views. Now when developing a report using a BV working in Crystal Reports 2008 on the server on which the BV resides all works fine; when we use Crystal from a client PC and start Crystal, get a BV from the server repository as a database connection,generate a simple report, running the program returns no data but error 'Cannot Open Database' appears followed by 'Unknown Database Connector Error'. Why is behavior from Crystal on a client PC different than when running Crystal on a PC that is remote-desktopped into the server, and what need I do so we can develop Crystal reports based on BVs from client PCs?
Hello,
If you edit reports locally you also need the database client and configured on the local PC also.
When you use Remote Desktop you are using everything installed on that PC. Remoting in all you are doing is passing the screen updates to your local PC and nothing else.
Oh, and you should likely install the BOE Client tools on your local PC also.
Thank you
Don
Edited by: Don Williams on Dec 24, 2010 1:44 PM
Similar Messages
-
Revision: 21394
Revision: 21394
Author: [email protected]
Date: 2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.javaFor our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
Hi all,
I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
I tried many times but can’t do upgrade successfully
This the error message I got when doing the job:
[ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
Appreciate your help.
Log files:
Command arguments are: apply
OPatch version is: 1.0.0.0.48
Using ORACLE_HOME/oui to look up oui libs...
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of Oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\oracle\ora92\oui
Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
Checking if this is a RAC system...
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
Result:
output to OPatch:
IS_CLUSTER=0
CHECK_CLUSTER=1
NODE_LIST=NULL
NODE_COUNT=0
LOCAL_NODE=NULL
IS_CFS=0
RAC_CODE=0
HOME_INDEX=1
This is not a RAC system
Interim Patch ID: 3738339
Checking the patch inventory.
Component Name: oracle.rdbms
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.rdbms_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.oracore_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.xdk_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.dbjava_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.java.javavm.javatools
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.context
Component Version: 9.2.0.5.0
Component Name: oracle.cartridges.locator
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.net_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.ldap_rsf
Component Version: 9.2.0.5.0
Component Name: oracle.emprod.oemagent.base_oemagent
Component Version: 9.2.0.5.0
Component Name: oracle.isearch.is_common
Component Version: 9.2.0.5.0
Component Name: oracle.options.olap.cwmlite
Component Version: 9.2.0.5.0
Component Name: oracle.rsf.nlsrtl_rsf
Component Version: 9.2.0.5.0
Bugs fixed by this patch 3738339:
3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
3575743 : 2004-S144E
3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
3666502 : ORA-00600 [1236] RANDOMLY OCCURING
3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
3528282 : 2004S075E
3412818 : REPEATED MESSAGES IN LGWR TRACE
2690205 : 2003-S190E
3543125 : 2004-S089E
3571233 : 2004-S141E
3458446 : 2004S059E
2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
3323435 : 2003-S126E
3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
3566469 : 2004-S138E
3320622 : 2003-S191E
3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
3571226 : 2004-S140E
3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
3371796 : EXPLAIN PLAN HANGS ON KKORMINL
3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
3540576 : 2004-S083E
3575747 : 2004-S145E
3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
3354470 : 2003-S195E
3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
Reading patch XML files and doing sanity checks.
Read the command to action file map.
Performing initial safety check.
Checking active processes:
Accessing inventory... This may take up to 300 seconds.
(retry 10 times, delay 30 seconds each time)
System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
Result:
d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
Error in executing Java program to check conflict
ERROR: OPatch failed during pre-reqs check.This is all the message when I run command in CMD prompt.
C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
Opatch Version 1.0.0.0.48
Perl Version 5.008007
Oracle Home = d:\oracle\ora92
Location of Oracle Inventory = D:\oracle\ora92\inventory
Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
Location of oracle Inventory Pointer = N/A
Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
The filename, directory name, or volume label syntax is incorrect.
D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
Error in executing Java program to check conflict
Error: Opatch failed during pre-reqs check. -
"Lightroom encountered and error when reading from its preview cache and needs to quit"
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains.
Any Ideas here? Is there another app that may be telling it where to look for the cache and it no longer there? I was using a ramdisk for a bit but ditched it. Not sure if that has something to do with it but it seems suspect.
Your thoughts?
--Kenny Brandon WilsonTalked to Adobe support this morning, this is their response in case anyone else is looking for help. I'm running a Windows 7 box, LR 5.6.
Gokul: Click on start and type %appdata%, then open roaming folder.
Edward: ok
Gokul: Open Adobe folder.
Gokul: Open Lightroom folder.
Gokul: Open Lightroom folder> Preferences.
Edward: ok
Gokul: Rename Lightroom 5 Preferences.agprefs file as Lightroom 5 Preferences.agprefsOLD.
Edward: OK
Gokul: Please check if you can launch Lightroom without any error.
Edward: it shows me a welcome screen and is asking me to select my country
Edward: aka, register the software
Gokul: You can skip and launch it.
Edward: LR catalog not found
Gokul: Please select the catalog.
Edward: my original catalog?
Gokul: Yes.
Edward: testing integrity of catalog
Edward: loaded just fine
Gokul: Okay.
Gokul: Please check if you can re-launch it again.
Edward: yes, it worked!
Gokul: Excellent!
Gokul: Since your preferences were corrupted you were facing issue so we renamed the preferences file to reset it.
Edward: aha....ok
All of my import/export presets were intact along with develop user presets. I'm happy as a clam for my $10/month! -
I get the following window on loading Lightroom 5.7 -
Lightroom encountered an error when reading from its preview cache and needs to quit.
Lightroom will attempt to fix this problem next time it launches.
I have tried several restarts, without success. Also reinstalled Lightroom; no joy
Any suggestions?Using your system browser (Windows Explorer or Finder), open the folder that contains your catalog. In Windows it is in your pictures folder and then in a Lightroom folder. Inside of the Lightroom folder you will find another folder that has the extension .lrdata. It will have the same name as your catalog except for the extension. You need to delete that folder, and then start Lightroom again. Lightroom will generate a new previews folder, and you should be back in business.
-
I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.
-
Corba error when running rich clients in 3-tier mode.
Hello
I am dealing with an Error when running Rich Clients (WebI and DeskI) with 3-tier ODBC connection to the server.
The client does come up and I'm able to create the query but when the data in refreshed I do get the error:
A database error occured. The database error text is: (CS) "CORBA Initialization failed". (WIS 10901).
I have a test server which I'm able to do this kind of connection without a problem but when I try to connect to the Prod server in 3-tier data connection mode throught the server I get this error.
My setup is:
BO XI R 3.1 FP. 2.1
Clients are also updated with FP 2.1
The data sources are Oracle and Teradata.
Best regards,
Hjortur.Hi Guys,
I am facing same error when I run the report from CMC. Error is like u201CThe database error text is: (CORBA) "Error on Executeu201D. (WIS 10901)u201DEven I have re-started the connection server but bad luck.
I would like to appreciate if someone help me out for the same.
Thanks in advance..!!
Thanks & Regards,
Keyur Modi | Functional Consultant Enterprise Solutions
TATA Technologies, Pune
m: +91-9769855899
website: www.tatatechnologies.com -
HTTP-500 Error Reading Data from Client!!
I'm trying to create a page where by clients are able to contact us through the portal. So, it's a pretty basic form where I have a text box for the subject, and a text area for the message body.
My problem is when the message body is over a certain size, I'm getting a "portlet cannot be contacted" on my screen. The Apache log comes up with the error:
[error] mod_plsql: /pls/portal/!PORTAL.wwpob_page.show HTTP-500 Error Reading Data from Client!!
I'm not using a windows OS, so the bug that has been talked about previously talked about shouldn't be the problem.
Also, I am using a POST rather than a GET, so I don't think it has to do with the browser (and I have tested this on Firefox and IE 5.5 and IE 6).
Would appreciate any advise.
Thanks, NickyAre you using SSL? Maybe, it has to do with it. I encountered a similar problem. It turned up that this read error occurred inside Apache and was caused by a nonstandard-SSL-request by Internet Explorer. te remedy was to add this to the Apache configuration:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
It tells Apache to switch to HTTP/1.0 and to never keep open socket connections with MSIE on SSL connections.
Lycka till! -
LR 5.3 has stopped functioning. Message Lightroom encountered an error when reading from it's previous cache and needs to Quit. Re boot comes backtio the same message how do I get the software back?
Thanks, it makes sense but I am a little worried about the files that are coming up for lr catalog. In order to process today's photos I opened a new catalog and that went well -- up to Smugmug and out to the client. but the only other file with today's (date which is when I had the problem -- power failure while I was importing) -- is not a previews file but in fact the corrupt lr.cat.
the rest listed including previews are dated 2012. Am I not looking in the proper place.
Thanks for your help
Bill -
Lightroom encountered and error when reading from it preview cache and needs to quit
A power outage caused my Lightroom 5.2 to shut down without closing. When I powered back up and opened lightroom it gives me an error "Lightroom encountered and error when reading from it preview cache and needs to quit" and then it says it will try to fix it the next time it opens. I have opened it 20 times and it is not fixing it. I removed the program completely and upgraded to 5.5 AND it is still giving me the same error. Is my catalog corrupt or something? I had it set to automatically load the most currently used catalog, so it is not allowing me to open or start a new catalog either. HELP!!!
Search the forum, this has been answered many times.
-
I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches." It hasn't, what should I do? Thanks Shawn (Irish Se7en) .
Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?
-
LR encountered an error when reading from its preview cache and needs to quit.
I have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you.Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
You cannot reset the trial period. -
I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???
Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.
-
how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.
Have a look at this thread.
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"." -
Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
I've tried renaming my catalog.lrcat file. I've copied over my most recent backup of the catalog.lrcat and that didn't work either.On Mac:
PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
Rob
Maybe you are looking for
-
I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.
-
External Flickering in 10.6.6 (LG M227WDP)
Hi, i have looked through the forums and seen a lot of people talking about screen flickering on there external monitors in 10.6.5 and then saying that the issue is gone in 10.6.6 sadly this issue started for me in 10.6.5 and still remains even after
-
I have to display an image in the report. but actually i'm getting it from the database and displaying it (it's a BLOB file). Can anybody suggest me , so that i can have the image displayed in a larger size than the size wat i'm getting from the data
-
TS1347 Outlook agenda items are not synced on iphone
I am syncing my iphone with MS outlook via Itunes. But since the last month or so I do not see my agenda items on the iphone. Older items I still see. What is the problem?
-
How can i find out the next 2 working days.
Hi Experts, Based on a given date, i would like to find out the next 2 working days. Help me out. Regards, Mansi.