Business Warehouse content for IHC In-House Cash ?

Hi Guys
Do any of you know whether there has been developed content for SAP IHC for BW ?
We are on 7.3 on HANA
Kind Regards
Lars

Hi Lars
Last time I worked with this, no std extractors were available and we built a custom extractor instead. It is really not that many tables you need to look into - off course depending on the requirements.
But we have made a solution for reconciliation of Local SAP FI, Central SAP FI and SAP IHC using both std FI extractor and this custom IHC extractor.
Also we made some pure IHC reporting for another client only based on a custom extractor.
Lastly I have integrated SAP IHC into SAP CM - and then used the report engine here - but the datamodel in SAP CM for IHB balances are a bit cumbersome - so dig into the details to find out if that is usuable for you.
Good luck
BR
Lone Kejser
www.1st-finance.com

Similar Messages

Help to find business / technical content for cost center accounting

Hi all,
I am a new to BW. Where can i find the technical and business content for cost center accounting info cube (data from R3) and the equipment info cube ZMXCART_XX(data from flat files). These are the two cubes which i learnt from training.
Does SAP BW provide techinal and business content for its demo cubes and how can i find them?
Please forgive if my question is too basic and crude.
Thanks
ak

hi AK,
you can find from help.sap.com or bi best practice
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/frameset.htm
the steps ...
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Financial ... Controlling ... Overhead Cost Controlling ... Cost Center Accouting ...
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/d80c3c99d56448e10000000a114084/frameset.htm
see infocube
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d90c3c99d56448e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/cb/149b3979e90e1be10000000a114084/content.htm
hope this helps.

SAP In-House Cash (FIN-FSCM-IHC) datasource????

Hi gurus,
does anyone know wich datasources SAP provide for SAP In-House Cash (FIN-FSCM-IHC) ?
Thanks a lot.
DIKK

Hi,
There are no IHC datasources available in SAP standard because the extraction functionality for IHC has nor been developed in BW, I'm afraid.
M Trein

In-house Cash functionality implementation

Hi SAP Gurus,
We are planning to the implement the SAP-FSCM-"In-house cash" functionality in our Group of Companies. Can you please update me the implications of this functionality, what is the the impact of existing normal SAP FICO environment. What configuration changes are needed for this change? What are the changes will happen in the Accounting entries posting in this regard.
Regards
appalas

Hi !
Since you you have asked everything in one question so I would not be able to answer all but the below ...
Affected Area would be as follows :
1. BTE ( Business Transaction Events ) settings ( for more check ... http://wiki.sdn.sap.com/wiki/display/Snippets/BTE'S )
2. You may need to deactivate BCA ( Bank Customer Accounts ) and activate IHC ( In House Cash )
3. The section on payment processes in In-House Cash also contain the FI settings of the In-House Cash Center
4. Also affected are the bank area-specific settings (for information on the term bank area, refer to Basic settings -> Bank area). Settings proposed for In-House Cash can be found in the bank area IHC.
5. Alogwith the above IMG - Settings, you also need to check - ALE functions (Application Link Enabling). Which are used to link the systems of the affiliated companies...
For, settings check, Basis -> Application Link Enabling (ALE) area..
(a) Use mesage category PAYEXT with basis type PEXR2002 to send payment orders
For Inbound Processing, transaction Code - ( i ) PEXN for payment orders from participating affiliates to the In-House Cash Center or for cross-bank-area payment orders between two In-House Cash Centers ( ii )PEXC for external payment orders from an In-House Cash Center to a participating FI system and (iii ) PEXC_PI if connected to FI via plug-in
( b) Use message Category FINSTA with basis type FINSTA01 and transaction code FINS as input parameter,
for a bank statement from the In-House Cash Center to the affiliated companies.
6. For Connection of Fi GL to In house Cash Center, refer ( +/- sign postings / General ledger transfer / Name check. These settings are relevant for the IHC general ledger transfer ( Under IMG-FSCM-IH- basic settings - Basic Settings Posting ) node.
7. You can Create Business Partners - Through Cross-application components -> Central Business Partner .
Note, Business Partner, manages data such as name, address and bank details.
8. Also, IMG of the FI system needs to follow the below for Affiliated Companies..
Bank Accounting -> Bank accounts -> Define house banks Store the In-House Cash Center as main (house) bank
(ii)Accounts payable and accounts receivable accounting -> Business transactions -> Outgoing payments -> Automatic outgoing payments -> Payment method / bank selection for payment program. Here you need to set the payment methods.
I hope, the above areas needs to be taken care for implementing IHC at the same time please be guided by the below site for a very good example.. ( http://help.sap.com/bp_bblibrary/500/html/W25_EN_DE.htm ) which contains a very good case study FSCM In-House Cash.
Regards,
Bhabani S Dash

In-house cash (IHC) activation

Hi,
In tcode BF11 or table TBE11 there are activations to be performed for modules. The activation of value "IHC" is turned off right now in our SAP system, however, it seems that it was once active since the IHC options are reflected on the IMG menu.
We are implementing IHC module for the first time and we'd like to activate IHC using the tcode or through the table update as mentioned.
As such, I'd like to seek advice on the following:
1) Supposed that IHC was once activated and then somebody turned it off, does this mean that it is still active? Will there be any problem when we want to set the check box for IHC even if it is active already?
2) What difference does it make when this value is reactivated?
Thanks in advance.
Regards,
Alvin

Hi
To activate IHC module, you can refer to below configuration guide and that section " Activate SAP Component SAP In-House Cash" will guide you how to activate all the BTEs required for IHC.
help.sap.com/bp_bniv2604/.../801_BB_ConfigGuide_EN_DE.doc
hope that this helps
Cheers
taro

In House Cash - advantages for companies

Hello everybody,
could you please tell me your opinion about the advantages of in house cash?
Maybe you see some advantages I don´t haven´t seen yet.
So what do you think are the advantages of:
- internal payment
- external payment
- central money income
with SAP In House Cash and SAP In House Cash in general?
Thanks in advance

Hi again
Sorry for my late reply - not sure if you are still interested - but at least here is my explanation.
When company A receives an invoice from company B, they will post that into SAP AP. At the same time company B has posted that invoice into SAP AR. In each CC and in each chart of account, you thus now have to subledger postings - being transferred to SAP FI GL as:
Company A: expense - vendor reconciliation account
Company B: income - customer reconciliation account
When Company A is running the payment run, the vendor reconciliation account is cleared and the amount is now posted to the bank clearing account. Due the account determination you have configured in F110, the payment will be forwarded to the IHC center. When received in IHC, the account determination here will result in money being deducted from the current account of company A and moved to the current account of company B. Pls note this is a bank account subledger and has nothing to do with a GL posting.
At the end of the day, the bank account subledger postings are being transferred to the SAP FI GL of the IHC in order to reflect each subsidiary's receivable and payable position towards the IHC center. At the same time, a bank statement is generated out of IHC and sent to both CC A and B.
Upon receiving the bank account statement in CC A, the bank clearing amount will be cleared and the amount moved the GL account representing the bank account. In CC B the open item on the customer recon account will be cleared against the GL account representing the customer - and closing the open item on SAP AR.
So each CC can have their own COA - but when posting into the IHC center GL accounts will be translated into current accounts - and the effect will be posted in the COA of the IHC.
Hope this clarified - otherwise just ask again.
BR
Lone Kejser

XI Business content for MDM - Syntax error in IDOC adapter

Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
     <IDOC BEGIN="1">
     
          <EDI_DC40 SEGMENT="1"/>
          <xsl:apply-templates select="."/>
     </IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveen

Moorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

Error in Installing the Business Content for 2LIS_06_INV data source

Hi Experts,
We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
Regards,
Kavitha Jagannath

Hi,
Follow bellow steps:
1. Goto RSA1.
2. Select the BI content.
3. Select the Grouping as' In Dataflow before and after'
Then,you can get the data flow which are haveing the DS/TR/Data targets.
4. Select the Install by setting the 'Install in background'.
Regards.

Business Content for Production Orders

Dear All,
we are looking for a SAP standard scenario for our business scenario to get details per production order and workcenter.
I found already Datasources 2LIS_04_P_MATNR (for production order header data), 2LIS_04_P_ARBPL (for production order operational data) and 2LIS_04_P_COMP (for production order component data), which contain the data we will need to be reported on.
Unfortunately I'm not able to find any How-To paper or anything like this, where I can see, how these 3 Datasources are coming together in BW. For 2LIS_04_P_MATNR I found 0PP_DS01 in the business content. But I expected to find as well an DSO in the SAP content for the other 2 Datasources. I'm also wondering, if there is a standard cube, where these 3 DSO's are coming together later on to be the basis for the reporting.
Does anybody of you have any standard documentation of this business scenario?
Thank you in advance.
Peggy

Hi Peggy , There is no standard DSO or infocube available which reports on all the 3 data sources combined together.
But there are standard DSOs ,infocubes like 0PP_O01 , 0PP_C04 which can be used in a custom multiprovider to draw reports of interest.
For more details refer http://help.sap.com/saphelp_nw70/helpdata/en/28/500b3c56488e6be10000000a114084/frameset.htm
Hope this helps
Sampada

Installing business content for 0MKT_DSO1/0CRM_LEAD_H

Hi
I am getting an error whilst installing the business content for any DSO/Infocube.
Grouping
In data flow before.
Error : Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
where as same DSO whilst acitivated wiht diff source system has no errors.
Old source system 199 - No error whilst acitvation business content - (SANDBOX)
New source system 200- error whilst acitvation business content - (DEV)
If Grouping
Only necessary objects are selected above error is not there.
But when after new transfer rules have been created and when infopackage is run, i get another error
error : DataSource 0CRM_LEAD_H is not defined in the source system
Now no data loads for new source system.

Hi hungryRaj:
On your source system use Tcode RSA6 to verify if DataSource 0CRM_LEAD_H is active, if not activate it using Tcode RSA5.
Regards,
Francisco Milán.
Edited by: Francisco Milan on Aug 2, 2010 10:00 AM

Where to download MDM Business Content for PI 7.0/7.1?

Hi Everyone!
I kindly ask for your help on my problem: I am not able to find the MDM Business Content for PI 7.0/7.1 anywhere. I searched in the Service Marketplace for a long time, but without any results... https://websmp109.sap-ag.de/installMDM seemed to be a good place for it, as well as in "Software Distribution Center" -> "Support Packages and Patches" -> "SAP Content" -> "ESR Content (XI Content)", but neither supply the adequate file
Can anyone help me? Thank you very much!
Best regards
Benedikt

Christian, thank you very much!
Call me blind, but I still can't find it.
After Navigating to Support Packages and Patches --> SAP NetWeaver as suggested, I just have the following options:
SAP NETWEAVER
ADAPTIVE COMPUTING CONTROLLER
SAP NW IDENTITY MANAGEMENT
ACCEL. AD FOR SAP NETWEAVER
Technology components releases prior to SAP NetWeaver
When I follow to the first option (SAP NETWEAVER) I just have the options for various releases of SAP NetWeaver, but no MDM in one of them
Do you have another hint?

Importing XI Content for MDM Business or MDM Business Content 5.5 SCV to IR

Hi All,
I'm required to create a CRM->XI->MDM using the provided MDM 5.5 SP05 - Business Content - Business Partner in the. marketplace. From the pdf files that i have read, I understand that i would have to import SAP ABA 7.0, and MDM Business Content/XI Content MDM Business to use the interface objects, mappings and comm channel templates. I have two questions:
1) Should I be importing the XI Content MDM Business or the MDM Business Content 5.5 SWCV to the IR?
2) After importing the above SWCVs , all i get is an empty SWCV for Both MDM Business Content and XI Content MDM Business with no pre-defined namespace and no object. SAP ABA 7.,0 SWCV however is working fine, with all pre-defined namespaces, and objects intact. How can i remedy the MDM Business Content/XI Content MDM Business SWCV?

Hi Sushil,
While i'm not 100 per cent sure of about it, i'm fairly certain that there should be ( I might be wrong). Two documents in the sap service marketplace implies this:
In https://websmp204.sap-ag.de/installMDM under the "Installation" Header->MDM 5.5 SP05 - Business Content - Business Partner.zip, there's a pdf file in the zip folder there that states:
"The XI content for MDM delivers interfaces, interface mappings and communication channel templates tailored to the supported SAP remote systems
and the shipped MDM 5.5 SP05 repositories."
Under the same "Installation" header, there's the IT Scenario Configuration.pdf file. In the pdf file, under the "Setting up XI" section they indicated that as a pre-requisite:
"You have imported the XI content MDM Business 5.5 (XI 3.0) or MDM Business 5.5
7.00 (XI 7.0) to the Integration Repository.
This XI content delivers interfaces, interface mappings, and communication channel
templates tailored to the supported SAP remote systems and the shipped MDM
repositories. The included integration scenarios dramatically reduce the manual effort
required to define the message flow between MDM and the supported SAP remote
systems."
Hence. that's why it leads me to believe that importing the SWCV into the IR "should" give me a pre-defined namespace with some objects available. Any advice on what i should do or did i misread it totally?

BI 7.0 Business Content for EH&S

Hello,
I've only found "healthcare" business content but it's more related to hospital management.
Does anybody know if there are bi 7.0 business content for Labor Health in companies which aren´t hospitals or health centers.
Thank you very much
Best regards
IRB

Hello again,
I've found Industrial Hygiene and Safety content:
   Hazardous Substance Inventory
   Accidents: Persons Involved
   Accidents: Safety Measures
   Accidents: Complete View
But it seems there's nothing about procedures and medical tests made to employees of a company (other than a hospital)...
Thanks
Regards,
Irb

Business Content for Industry Solution Aerospace and Defence (A & D)

Hi,
We would like to implement BI for one of the organization where ERP SAP R/3 IS Aerospace and Defence (A & D) is already implemented. I tried to see business content for A & D, but could not find. Could anybody advise me where anything is available for A & D?
Thanks and Best regards
Rajendra

All business content is available in the helpfile (help.sap.com). For your IS however, the link in the helpfile seems to be dead.
This either means there's an error in the online helpfile, or there's simple no business content available...
Try contacting SAP to verify?

Business Warehouse content for IHC In-House Cash ?

Similar Messages

Maybe you are looking for