Bussines Service for AQ enqueuing

I have created a business service based on a JCA Adaptor for enqueuing messages to a queue. When try the bussines service from the test console a new message appears in the queue table but the payload fields are empty, so the adapter is working but the content of the message is not propagated.
Besides if i try to build a proxy service based on this bussines service i get the following error:
"Invalid WSDL for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, WSDL must contain JCA activation spec properties."
Have anybody faced with these problems? Is a problem in the wsdl generated by Jdeveloper?
I would apreciate a little help because i am quite stuck.
I have followed these stetps to build the bussiness Service:
I have created the wsdl definitions for the JCA Adapter using JDeveloper Wizard 10.1.3.4.0 selecting new AQ Adapter called GeocodingResultEqueuer, i selected the connection, the enqueue operation, the name of the queue, a correlation ID, and the whole Object RESPONSE_GEOCODING option.
I have upload to the Bus the aqAdapterOutboundHeaders.wsld, aqAdapterOutboundHeaders.xsd, DAVIDA_RESPONSE_GEOCODING.xsd and the GeocodingResultEnqueuer.wsdl files.
I have created a bussines service based on the GeocodingResultEnqueuer wsdl and selected the following options:
General Configuration
Service Type: Web Service - SOAP 1.1 (WSDL: WS-Portlets/comun/definitions/GeocodingResultEqueuer, binding="Enqueue_binding")
Transport Configuration
Protocol: jca
Load Balancing Algorithm: round-robin
Endpoint URI: jca://ss
Retry Count: 0
Retry Iteration Interval: 30
Retry Application Errors: Yes
JCA Transport Configuration
Adapter Name: AQ Adapter
Adapter Type: AQ
Always use configuration from JCA: WSDL true
Connection Mode: Non-Managed
Overwrite Connection Authentication Properties: false
Connection Factory Properties: ConnectionString = "jdbc:oracle:thin:@inver:2484:I917"
Operation Name: Enqueue
Interaction Spec Properties: Correlation = "SPS501"
QueueName: = "RESPONSE_GEOCODING_QUEUE"
OpaqueSchema = "false"

This is very common error usually occurs when you create a Proxy directly from BS (Vice versa) or when we use BS WSDL for the proxy with out modifications. What would be the type of Proxy that invokes BS. In this case it is JCA. For Inbound JCA wsdl are different from outbound JCA WSDL. As per your use case you have to create a corresponding inbound wsdl to be used for proxy, or uses the out bound wsdl for proxy but change the transport from JCA to some other for the proxy service.
JCA inbound proxies are supposed to be invoked by ERP/EIS. So to expose a JCA BS through OSB we need to select transport other than JCA for the proxy.
Let me know if this does not solve your issue.
Manoj

Similar Messages

No service for system 'system', client 'client' in Integration Directory

Hi experts,
I'm getting troubles while testing the first HR IDOC to SOAP scenario in the system. The IDOC in HR is a customized one but was perfectly created. It's not my first IDOC to SOAP scenario so I'm in conditions to ensure it is correctly configured. I'm getting the troubles in the connection between HR and XI and the message given by HR at SM58 transaccion is: No service for system 'system', client 'client' in Integration Directory.
can anybody help me solve this issue?
thanks.
Roberto Solotun

>
RSolotun wrote:
> Hi Neetesh, I'm sure that the troubles came from the Bussines system but I cannot realize where it is. The logical system is specified for the corresponding Business system in the ID.
>
> Thanks
>
> Roberto Solotun
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system

In Attachement List Services for Objects White Screen when I Display a Note

Hi Expert,
Need your assistance.
I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed:
1. Go to FK03
2. Open a Vendor
3. Click the Services for Objects
4. Attachement List
5. Select a Note
4. Display it
5. Pop up window appreared and no information occurred. Only White screen
Is there's a missing configuration, plugin, or data in my SAP system/workstation?
I tried to login to other PC and it worked.
Just wondering what is missing on my computer.
Your response will be helpful.

Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar

IDOC-Xi-IDOC: CRM - XI -R/3 (No service for system SAPOCC, client ** in ID)

Hi all
I am doing a scenario IDOC - Xi - IDOC where CRM sends an IDOC to R/3 via PI.
I have configured everything in OCC (CRM system), PI and BSC (R/3 system) but when I test it with the transaction WE19 in OCC nothing happens in PI or BSC.
All i can see if a message in SM58 transaction in OCC.
Function Module - IDOC_INBOUND_ASYNCHRONOUS
Target System - XI.
Status Text - No service for system SAPOCC, client *** in Integration Directory.
Could anyone tell me what is the problem.
Your help will be very much appreciated
Regards
Naina

Error message: No service for system SAPCRD client 201 in the integration directory
Cause: There is no service without party in PI server that represents OCC server with client details.
Solution:
We send IDocs from system OCC to PI. In the control record (Segment EDIDC40) of the IDoc, the SNDPOR (SenderPort) field contains the value "SAPCRD". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service)
In System Landscape Directory (SLD) create a technical system for OCC system and assign a client for the same. Don't forget to assign an "ALE logical system" to the technical system created. Create a business system for this technical system. Then Business System can be imported under service without party/update the details existing in PI.
Edited by: Rodrigo Alejandro Pertierra on Jun 23, 2010 10:28 AM

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

Issue in setting custom identity service for soa 11.1.1.4

Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
Bala

Hi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks

Been without any phone service for over 8 hours

There is no way to report the outage online as the diagnostic does not show anything. All of Chihuahua Valley in Warner Springs, California has not had phone service for over 8 hours and Verizon will not admit a problem despite numerous phone calls from friends who are outside the community and have phone service. One of the neighbours was told there are no reports of an outage and was told that she could make an appointment for a tech to come out on the 15th!!!!! Well if anyone at Verizon is reading this then get off your **bleep** and get this fixed. 951 767

Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

HT201415 I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

I want to purchase a month of cellular service for my IPAD2. When I use my ITunes password, it states that I have the wrong password but does not offer a way to reset my password. Please advise.

Read through this link and maybe you'll see something that will help you:
http://www.tech-recipes.com/rx/5827/ipad-3g-activating-purchasing-att-cellular-d ata-for-the-ipad-3gwifi/

Idoc for materials and service for same contract.

Dear All
I have an scope where i have to migrate the data for material and services for the same contract.Is there an Idoc which does it so or otherwise ?Earlier in scope materials contracts have been loaded with the help of idoc type :- PURCONTRACT_CREATE01 and that of Service Contract using Idoc type :- BLAORD03.No customization is however permitted .Tcode for the same is ME32K.
Regards
Somnath

Hi,
It is not clear to me if you are working with sapscript or smartforms.
You have only to find a variable which identifies the kind of invoice
I do not know that variable so i use an example variable
for sapscript:
/: IF &VBDKR-FKTYP& = '1'
/ INVOICE
/: ELSE
/ SERVICE ORDER
/: ENDIF.
In a smartform you can also do something like that.
but There you work with conditions (eq, BOOLEAN)
You have only to find the right variable
success,
Gr., Frank

Short dump while executing job SM:EXEC SERVICES for EWA alert generation

Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.

>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul

F4 help not working in custom backend service for PD form

Dear All,
Iam working with the Create position HCM PD form and i have a requirement to add two fields, one for the company code and the other is for the cost center and then create the relationship betwee the position and the cost center when the form is submitted.
I have defined a generic service and created an enhancement implementation and linked this generic service to the imppementaion. I have written the logic for the F4 help for the fields in the method GET_HELP_VALUES, i have written the scripting for the drop down field in the form to trigger the F4 help in the form.
When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form.
But my current problem in that he values are not getting passed from the method to the field on the screen. I have worked on quite a few scenarios for F4 help and doing validations in the implementation in the PA form and i have seen this functionality working fine.
My problem here is that i am unable to understand why the F4 value help is not working in my form. The standard PD service SAP_PD is also being used in the form to have the dropdown values for the account assignment feature.
Could you please suggest me with some clues to fix my issue? i can share more details for further analysis.
Thanks.
Best regards,
Sridharan

Hi Chris,
Thanks for your inputs. please see my reply to your questions
First....are you sure you have "marked" that field as possible for F4 help?
Reply: Yes
Second...are you populating the help values strictly from that method...ie. not also using do_operations method to do it. If you refer to the documenation, it points out that trying to use both can cause issues.
Reply: i am using only the GET_HELP_VALUES method and nothing written in do_operations.
Third...when you debug your method, do you "see" the help values actually populating and as you say "not coming back to the screen"? I would check this first to make sure that there are actually values being found (ie. the logic within your service is correct).
Reply: i have put the external break-point in this method and when the form in opened for processing by the HR admininstrator,the form openes up and the control is not being sent to the debugger. I have written the scripting in the exit event of the events and scripts as suggested in the SAP help document. SO when i click on the dropdown field in the form, the debugger starts and executes the method and the code executes, then no values are populated on the screen.
Fourth...are you using any generic services for populating help values as well. HCM P&F has a nasty habit of "if one GS fails, they all fail" so often, your service might work fine but an error in another makes yours appear to fail as well....hard to debug and find those kind.
Reply: Yes i am using the generic service mainly for the purpose of F4 help. I do not see any issue with other gneric services as i have implemented a few generic services for PA forms and they are working fine.
Fifth...oops...forgot the obvious one...make sure it isn't a security issue...ie. make sure you have access to read the cost centers you want.
Reply: I dont get any auth error in SU53 while i test the process in R3
Lastly, you said:
"When the cost center is being passed to the screen, i would then read the value of the cost center in the form workflow and create the relationship between S and K in the workflow as i am unable to achiev this in the design time of the PD form."
You actually should be able to do this using an Advanced/Enhanced Generic Service (if this is in fact the step at which you want a true update to occur). Just a thought.
Reply: Could you please give some more information about this, how can i achieve it in advanced generic service.
Appreciate more thougts from you Chris!
Thanks,
Sridharan

Error in self service for my employee - Related Activities in MSS

Hi,
NW2004s SP9 EP7.0 ECC 6.0
we are trying to implement the self service for my employee in related activites functinality from the general information of team workset ( Team --> General informatio --> Related activities --> Self service for my employee ) in MSS which is a replicaiton of ESS in MSS functionality from the previous versions.
When
I click on any of the options like Personal data or Addresses it gives me a blank page with no information on it. (It does give a DONE message with error/warning message on the status bar of Internet explorer. The error message says getactivetrackingEntryValue() is null)
Do I need to do anything to get this page working. I do not see any config related to this.
Appreciate any inputs.
regards
sam

James,
I think the note refers to note been able to display the general infromation iView itself. I have implemented the note and am able to see the genral information iView. My issue is I am not able to perform "Self service for my employees" in "related activities" iView.
Thank for you reply and correct me if I am wrong.
Sanjay, I have raised the issue with SAP, in the mean while if you can please let me know the patches or a list of them that are requried thyat would be awesome. Sorry for asking you this, but the basis team here asks to tell them what is requried even though I do not have sufficient authorizations to check them.
Appreciate you help on the same.
regards
Sam

Problem with user services (creating a service for mpdas)

Hi, I'm using mpd and using a user service to start it.
However, I'm trying to create a service for mpdas (a mpd client for last.fm) and getting some errors:
currently, my mpdas.service is as following:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
[Service]
ExecStart=/usr/bin/mpdas
[Install]
WantedBy=default.target
Which giving me the following errors:
(14:49:55) [ERROR] You are not root. Not changing user ..
(14:49:55) [INFO] Connected to MPD.
(14:49:56) [INFO] Last.fm handshake successful. SessionID: ...
terminate called after throwing an instance of 'std::ios_base::failure'
what(): basic_filebuf::underflow error reading the file
Aborted
Which are the same errors I get if I run just "mpdas" instead of running it with sudo.
If I use it as a root service (instead of a user service) it fails on startup, but works fine when I restart the server.
So, I'm assuming:
1) mpdas needs root permission
2) if used as a root service, it fails at startup cause the mpd service (enabled as a user service) hasn't started yet
3) if used as a user service, it fails cause it needs root permission
What's the 'correct' way to solve this? (I believe mpdas should be a user service, cause it runs with a config that is just for my user).
Is there a way to make a user service run with root privileges?
I couldn't figure out the best way to configure it.
Last edited by alv-r- (2014-11-29 18:37:56)

TheSaint wrote:Why should it fails with sudo?
It works only with sudo. It was failing as a system service because it needs mpd, which I configured as an user service. Then when systemd starts the system services (when booting) there's not mpd instance running and it fails.
TheSaint wrote:Doesn't it works with fakeroot ?
As a noob, I don't know exactly how fakeroot works, I'll take a better look at it, but running it with fakeroot takes rid of the errors I was getting when not running as sudo.
The problem I have now is that it still fails on startup, but there isn't any helpful (or unhelpful) message. It just shows the PID and says it failed.
If I run
systemctl --user start mpdas
it works well though. Any ideas of why this happens?
My current unit file looks like this:
[Unit]
Description=AudoScrobbler client for MPD
After=mpd.service
Requires=mpd.service
[Service]
ExecStart=/usr/bin/fakeroot /usr/bin/mpdas
[Install]
WantedBy=default.target
Raynman wrote:Why does it need root privileges? Maybe you just need to configure it properly to run under your normal user?
Seeing the options in the man page and the config options for the config file, I don't see any that could do the trick.
I'll send a message to the developer with the error I'm getting (when not running as sudo).
Last edited by alv-r- (2014-11-29 18:36:59)

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

How to create web service for a Java class in SAP NetWeaver Studio

hi all,
i am using SAP Netweaver Developer Studio.have created a normal java project and i want to create web service for one of the classes in this project. i used the Web Service Creation Wizard to create a web service for this class. but it says there's no methods available for VI. all my methods in this class are public, what should i do?

Hi,
I guess there are other ways. But this is an easy way, if you find the right wizards.
Besides this it is good practise to define interface methods so that session bean implement these interface methods, and thus seperate the interface from the implementation.
In this approach you will need 3 projects:
An enterprise application project (will contain EJB Module)
An EJB Module project (will contain session bean)
A Java project (contains code that implements the session bean methods)
In my previous post I suggested to use a J2EE web mudule project. This was a mistake, it should be EJB module.
But it should be possible to do it in another way. It is up to you.
Good luck, Roelof

Bussines Service for AQ enqueuing

Similar Messages

Maybe you are looking for