Button transitions don't work

I'm importing a Quicktime movie into iDVD 7. The movie was produced with FCEHD 3.5, and contains 2 chapter markers. None of the iDVD button transitions will work. No matter which transition I choose, the image flashes briefly to blank white, then to the expected beginning of the movie or scene. This occurs no matter which theme I use. Any ideas?

Hi
I don't use HD - but just thinking.
FCEHD 3.5, and contains 2 chapter markers.
a. No Chapter marks at the very start of Your movie - iDVD want's to do this by it self.
b. Export out of FCE/P WITH Chapter marks !
I do in FCE/P (SD)
• Export out as QuickTime .mov
• Not selfcontained (not important but saves time and spaces)
• NO QuickTime CONVERSION
• Export with Chapter Marks
• Secure a minimum of 25Gb free space on boot hard disk (others don't count - at all)
• This QT.mov I import into a NEW iDVD project (can't be updated - if change -> make a new one)
Yours Bengt W

Similar Messages

  • Transitions don't work with tracks

    For some reason transitions don't work for me when I have them on tracks. For instance, Ive set a "dissolve" transition to occur at the end of Track 1 as it moves to Track 2. Instead, it simply jumps to the next track with no transition. Transitions seem to work with menus no problem, but once a track is involved, they stop. Im using DVDSP 4.
    Anyone have any insight?

    Hmm... you \can do this if you really need to... but you have to do a bit of jiggery pokery.
    Take the last frame of your footage in the first track and open it in photoshop. Export it as a still image and take it back in to DVDSP, and add it to the very end of the video in the track. Adjust the length of it to be about 3 seconds and highlight it, and now add the transition you want.
    The length is critical - the transition needs to take place using some of this image as the material. If you use a short transition you can use a short span for the image. If you don't, you need to extend the image. What this means is that your user will see the still for longer than necessary if you get this wrong.

  • Transitions don't work after importing a project from Premiere to AE

    I've imported a project from Premiere CS3 to AE CS3 and all my transition (fade + wipes) are now solids and they don't work on timeline or on exports, but they still show in my sequence.
    How can I make AE use those transition again so I don't have to go through all project and keyframe transitions.
    Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
    Thnak you for your time and interest in my problem.

    fredou_79 wrote:
    Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
    Exactly the problem. AE is only to able to translate a few transitions, which include the normal cross-disolve, linear wipe, dip-to-color and a few others, but since those routines are hard-coded in the Premiere Pro Importer, they have no way f doing the same for third-party products. So more or less you will have to rebuild your stuff, either by using the proper transitions in PPro or in AE.
    Mylenium

  • Trackball buttons suddenly don't work

    I've been using a MS trackball explorer with this iMac G5 since I've had the computer. I also have a MS trackball Optical on my iBook.
    Suddenly, the two right buttons on the explorer which I have programmed for 'forward' and 'back' don't work. I tried substituting the trackball explorer and found it had the same problem on the iMac, but both trackballs worked fine on the iBook, which says to me that it's a software problem. The other functions on both trackball work fine.
    I have repaired permissions, searched and removed all items for the MS intellipoint, and uninstalled and reinstalled intellipoint. No help.
    Can anyone suggest anything to help?

    bulder wrote:
    >
    > Buttons suddenly don?t work . I have a navigation clip
    with flash buttons, -
    > referencer and husbyggeri expands when you push the
    button. it worked fine -
    > but now many vistors have to push twiche if they shal
    see the site, this means
    > many are leaving because it dont work - does anyone know
    what?s happening???
    > my clip is here:
    http://www.fjerring.dk/menu/
    Let me guess, happens only in IE ?
    Search google for "click to activate"
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • What should I do on GMAIL LOADING and the buttons that don't work on Firefox 4?

    The Write e-mail, reply, reply all and config GMAIL buttons DON'T WORK AT ALL in MZ Firefox 4. In Explorer 9 works fine. Shat shoud I do? And ABOUT:CONFIG dom.storage don't fix the problem

    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft
    Data Recovery – Best
    Data Recovery – Disk Drill
    Data Recovery – Data Rescue
    Data Recovery – File Salvage
    Data Recovery – Stellar Phoenix
    Data Recovery - uFlysoft

  • Transitions don't work (stay black)

    Hello, I hope somebody can help me with the following problem:
    I'm using Adobe premiere elements 7, and I'm trying to put some transitions between the videoclips. But only two transitions are working, it is possible to edit the other transitions and put them between the clips but when I preview them I only see a black screen (sound does continue playing) where the transition should be. Does anyone know what to do?
    Thanks!
    Jorien

    Hello again,
    I’ve enclosed the timeline, zoomed in. The first screen is the timeline with a transition that does work, the second one is the same timeline with a transition that doesn’t work. But what I’m thinking now, Is that the transition maybe does work, I just can’t see it on the preview-screen. I can see the transition in the timeline, but the monitor stays black during the transition. So maybe I do need some kind of videocodec (this is new computer, so that’s certainly possible)?
    Grtz, Jorien

  • Transition script and button script don't work together

    Hi
    I've been experiementing with actionscripting transitions
    between sections... this is the first site I have tried this with
    (last 3 had swf loaded in one after another rather than
    transitioned between). I used some code from kirupa.com which works
    for loading movies in and out, but I also have some code for my
    movie buttons. I can get one or the other working, but not
    together, so I guess I'm clashing code somewhere, I could do with
    some help please to find what I'm doing wrong...
    The transistion code and calling-up buttons is;
    Code:
    Menubar.b1.onRelease = function() {
    if (_root.section != "about.swf") {
    _root.section = "about.swf";
    _root.transition.gotoAndPlay("closing");
    Menubar.b2.onRelease = function() {
    if (_root.section != "portfolio.swf") {
    _root.section = "portfolio.swf";
    _root.transition.gotoAndPlay("closing");
    Menubar.b3.onRelease = function() {
    if (_root.section != "contact.swf") {
    _root.section = "contact.swf";
    _root.transition.gotoAndPlay("closing");
    and the code I have on my movie buttons is;
    Code:
    on (rollOver) {
    gotoAndPlay("rollover");
    on (releaseOutside, rollOut) {
    gotoAndPlay("rollout");
    Is there a way to combine them???
    Thanks. Wayne.

    your on(rollover) handlers are applied to buttons that are
    children of a movieclip that has handlers defined. the parent
    movieclip (Menubar.b1 etc) is going to intercept those mouse
    events.
    to remedy move you on(rollover) etc handlers to your
    movieclip buttons b1, b2 and b3 on MovMenu's timeline.

  • FCPX 10.1.2 : Transitions don't work

    Hi there,
    today I started my computer and launched FCPX, just like pretty much every day of the past 3 weeks. All of a sudden, I can't apply Cross Dissolves (or any other transition) to any clip. I constantly get this message:
    I know that my clips need handles in order to make a transition work, and that is totally the case... in some cases, there are 3 minutes of footage before AND after the part that is in my timeline, so I don't see any reason for this message to appear. Also when I click on the "Create Transition" button, nothing happens.
    This really grinds my gears and I have absolutely NO clue what could cause this problem. I googled for hours and reset pretty much everything there is to reset - without success.
    I really hope that I will find some help here, I cannot risk this project to be delayed!
    PS:
    I'm still on 10.1.2 because I'm editing a big project and I don't want to risk it being delayed/damaged by problems with the newest version.

    I managed to solve the problem.. it's pretty stupid! For some reason my default duration for transition was set to 0.06 seconds, YES, seconds, not 6 frames. 0.06 Seconds are equal to roughly 1.5 frames, which is clearly not enough to make a transition! The error message was a bit weird since it "lied" to me if you look at it that way

  • Importing movie file - transitions don't work?

    Hi all, this is my first post. I searched a bit here and EVERYWHERE on the internet, but couldn't find a solution to my question.
    I'm trying to import a .mov file I created in powerpoint. In the file there are smooth transitions, where one images fades into another. When I import the file, I can view the movie in the preview window (double click the filename in the Project tab). It plays fine, all transitions are intact. However when I drag it into my composition the transitions are gone and there is no fading. It's like there is an alpha channel that's not getting interpreted correctly. I've tried every setting in the Interpret Footage window for the Alpha channel.
    I've done this in several other projects. It's always a pain to get past this part. For some reason I can never repeat the same steps to get it to work.
    If anyone knows what REALLY going on and what I can do to import the footage properly, I would appreciate the help.
    Thanks!

    Todd_Kopriva wrote:
    > It's still puzzling that I can play the movie fine in AE's preview window :/
    What version of After Effects are you using?
    When you say "preview window", what panel are you actually referring to?
    If you're referring to the player window that opens when you double-click a QuickTime footage item in the Project panel, then you need to know that in After Effects CS4 and earlier, this is just a QuickTime Player window.
    Ah, that makes sense then.
    I'm using CS4.

  • Button lnks don't work?

    For some reason I can't get my buttons to link to a URL. The file was created in Flash CS3 and I'm working in CS4.  I'm still a newbee. Seems by the time I finally figure Flash out, it's time to learn it all over again. Getting familiar with AS, but still have along way to go. Anyway when I apply either these scripts to a button the url launches without ceremony or not at all when I preivew it. Probably something brain dead, I'm sure.
    AS2
    .onRelease = function() {
        getURL("http://www.http://www.linkedin.com/connections?trk=hb_tab_cnts.com");
    AS3
    linkedBtn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
    function mouseDownHandler(event:MouseEvent):void {
    navigateToURL(new URLRequest("http://www.http://www.linkedin.com/connections?trk=hb_tab_cnts.com));
    Errors:
    Line 2 – The class or interface 'MouseEvent' could not be loaded.
    Line 1 – Statement must appear within on handler
    Thanks!
    Bill

    I can totally understand how you can lose it with idiots like me. We mean you no harm, honest. So you know, I am applying this code to the buttons not the frame and this was probably first authored in either MX 2004 or Flash 8. Does Flash CS4 open as AS3 by default?
    Tried this:
    face_btn.onRelease = function() {
        getURL("http://www.http://www.linkedin.com/connections?trk=hb_tab_cnts.com");
    Line 1 – Statement must appear within on handler
    Don't I need a function to call on here? What do I need to tell it what to do?
    Then this:
    face_btn.on (release) {
          getURL("http://www.http://www.linkedin.com/connections?trk=hb_tab_cnts.com");
    Line 1 – Expected a field name after '.'  operator.�
    Even tried this.
    face_btn.onRelease = function() {
         getURL("http://www.facebook.com/#!/profile.php?id=1208936702","_blank","GET");

  • Home button that don't work.

    It won't work at all! and I was gonna jailbreak it but I'm not paying money to jailbreak the stupid thing!! It's not even a year old!!!

    first jailbreaking doesnt cost anything. Second if it isnt a year old it's still under warrently. Stop complaining and go to an apple store. They will fix it or give you a new one. If your short on time though just turn the ipod off, put some 70% or more isopropyl alcoholon a paper towel and press the home button repeatedly. Wipe away anything that comes off, do it again until stuff stops coming out. turn the ipod back on and see if it works now. If not restore the ipod. If it still doesnt work take it to apple.

  • Transitions don't work!

    I'm trying to learn about transitions.  I have a brief clip that is split into 3 scenes.  I've inserted variuos transitions, and I've set the duration as long as 10 seconds, but I still get a cut -- no transition.  Rendering the clip doesn't solve the problem.
    What might I be doing wrong?

    It sounds like you are taking a single Clip, Cutting it, and then applying Transitions to those Cuts. Is that correct?
    If so, then there is nothing to Transition from, or to. As a test, grab three different Clips, drag them to the Timeline, and then apply Transitions to those. Does that work better.
    One major consideration with Transitions is Handles. This ARTICLE goes into much more detail, and explains Handles in detail. This is a concept that one must get their head around, when using Transitions.
    Good luck,
    Hunt

  • Button functions don't work AFTER loaded onto website.

    Created a document in Indesign 5.0. Created buttons to click to "next page" and "previous page." Exported to interactive PDF, launch the pdf (full screen) and the buttons advance to the next page when clicked. Problem arises when document is loaded on website. Button functionality disappears.  See website document: http://www.sonypictures.com/kenko/assets/pdf/2013SPEBenefits.pdf

    So when a pdf is launched within a website--it is forced to open in a preview mode...even though I have Acrobat on computers tested with it?
    The other interactive functions (like the hyperlinks) are working fine.
    When the document from the website is saved to the desktop, it opens in Acrobat and all interactive functions are still there.

  • Button functions don't work

    I've had this problem occur intermittently in AS2, and I
    always work around it my putting the code right in the button, but
    it seems that sometimes, out of the blue, one (or some) buttons
    will ignore button functions that are called from a frame script,
    while other buttons are quite happy with their frame scripts and
    work as they should. Yes, the instance name is correct and the
    function is defined within the timeline range of the button, and
    the syntax is correct. It's just a strange phenomenon, and I wonder
    if anyone knows if there is a rhyme or reason (or if there isn't)?
    Thank you for your help!

    Hi clbeech! Thank you for your reply. That wasn't it, what it
    was is interesting... I have a timeline-animated fade in on the
    button, and the function is defined after the button is completely
    faded in and the instance name is defined. Everything is correct,
    however, the first frame of fade-in didn't have an instance name.
    Now keep in mind, that the function is defined after the keyframe
    on which the button is given an instance name, so it shouldn't have
    made any difference, but it did. Strange, isn't it?

  • How to make an ipod classic get off the apple boot logo when the menu an center button still don't work

    i tryed to connect my ipod classic to my computer an every time i do it will start flikering an when i conected it to a wall plug it just get stuck on the boot logo it had the the red x but i fix that but now its just stuck on the boot logo i need my ipod please tell me what i need to do pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeee

    The big Red X is a sign of iPod undertaker coming, so you only have temporary extension and put it in Comatose state.
    Some laptops have only one high power USB 2.0 port, so if it flickers, try the others on your laptop.
    However try the following, (bear with me if you have done all these.)
    Toggle the hold switch, make sure you don't see the red marking.
    Press Menu and Center butoons for about 10 secs till the Apple logo comes ON, then release the buttons.
    If the above solve the frozen Apple Logo, then do a Disk Diagnostics, read this earlier post from tt2.
    https://discussions.apple.com/message/17028567#17028567
    Don't worry if yours is Windows, the process apply to the iPod and not the PC.
    Good Luck

Maybe you are looking for