Button with dropdown menu

Hi,
i am new at apex and i try to create a button with dropdown menu. any help? i dont want to use plugin but create a new one... i know that i need jquery and i have tha basic knowledge.
thanks,
Adven

Hi,
You could try to create a list with as template Pull Down Menu.
Make sure that you create parent-child relations to get the pull down menu options.
It also depends on the theme you pick up.
Hope it works for u
Sunil Bhatia

Similar Messages

Home Sharing Problem: Import Button & "Show" Dropdown menu are missing?

Hi Everyone,
My wife and I are both running iTunes on Macbook Pros and we are both logged into eachother's iTunes libraries through Home Sharing accounts. However, the Import button on the bottom has disappeared, so has the "Show" dropdown menu that is typically to the left of the Import button on the bottom of the screen when you are in the other person's Music Library. The Show dropdown memu typically displays the options: All and Not in Library. We can play and listen to each other's music, however we can't Import songs. Can anyone help me troubleshoot this problem??
Thanks,
Patrick

To clarify as I have this problem repeatedly here is the description and the cure.
Sharing is enabled in the sharing tab. Other computers can see this computers library but cannot import. The icon for the home sharing doesn't show the "house" - it just shows some musical notes.
This means that home sharing is not enabled. JUST SHARING.
In Itunes 11 use: File/Menu/Home Sharing/Turn on Home sharing.
But you are not done.
When home sharing shows up now in the left panel - click it. The right panel will present a sign on for your apple ID. Sign on and enable home sharing.
Then you will be able to import form the target computer again.
It gets disabled with OS upgrades and sometimes with iTunes updates.

Interactivity with dropdown menu

Hi,
I need dropdown menu for my project. I know Captivate is
giving dropdown menu if i use project>Skin but its skin is not
matching with my project interface also it is not letting me to
customized it.
If i make the dropdown menu in flash and import the .swf in
captivate, is it possible to give interactivity to flash
dropdownmenu to the captivate slides and if yes how to do it?

Hello pocketPc
In most cases you would create this the same way that you
would any other kind of interactive simulation.
You start by capturing your screens using either the training
simulation or assessment simulation recording mode. Captivate would
then add click boxes to the dropdown menu and radio button when you
click on these items in the application you are capturing your
screens from.
That way once you finish your screen capture session you
would end up with a slide that shows for example the radio button
in its default state and another slide with the radio button
selected. Same goes for the dropdown menu.
If this isn't what you require then please provide us with
some more details so that you can advise you better.
Regards,
Mark

Android – html with dropdown menu not working

hi everybody,
I'm creating a digital pubblication fo android and I'm testing it on an Asus tablet.
I just have a big html widget showing a local web application. Everything works except a simple dropdown menu: when I tap on the button that should open the dropdown items, the button highlights itself, but the options don't appear.
this the HTML code:
Size: 4
4,5
5
5,5
6
6,5
7
7,5
8
8,5
9
9,5
10
10,5
11
11,5
12
12,5
13
13,5
I'm sure it worked on a Samsung tablet (within the DPS app), and it works on the Asus if I access to the application via browser.
it only doesn't work when loading it within the DPS app on the Asus device. is the tablet brand the problem?
my android version is: 4.2.2.
anybody can help me, please?
thank you very much.

it works with the native android viewer!
but with this there's another problema (that the legacy one doesn't have): I have a simple form and the last text field appears beneath the keyboard.
with the legacy viewer each time I move the focus from a textfield to the next one, the text field moves upwards to be visible (and not hidden by the keyboard).
this is the code for the form:
<div data-role="fieldcontain" class="text-field">
<label for="firstname">Nome:</label>
<input type="text" name="firstname" value="" placeholder="" class="required" id="firstname" />
</div>
<div data-role="fieldcontain" class="text-field">
<label for="surname">Cognome:</label>
<input type="text" name="surname" value="" placeholder="" class="required" id="surname" />
</div>
<div data-role="fieldcontain" class="text-field">
<label for="surname">Indirizzo:</label>
<input type="text" name="address" value="" placeholder="" id="address" class="required"/>
</div>
<div data-role="fieldcontain" class="text-field">
<label for="email">Email:</label>
<input type="email" name="email" value="" placeholder="" class="required" id="email" title="Your error message" />
<div class='error_message'></div>
</div>
<div data-role="fieldcontain" class="text-field note">
<label for="message">Note :</label>
<textarea name="message" id="message" placeholder="" ></textarea>
</div>
<div data-role="fieldcontain" class="text-field mail">
<label for="email_shop">Email negozio:</label>
<input type="email" name="email_shop" value="" placeholder="" class="required" id="email_shop" />
</div>

Radio buttons with dropdowns?

I'm creating a form for my company's HR department, and I need some radio buttons with dependent dropdowns.
In other words, I'd like (for example) three radio buttons. No dropdowns appear until one of the buttons is selected, and then the appropriate dropdown appears. Is this possible? Or is there a better way to do this? I don't want the unselected dropdowns to be available.
I have Pro 9 for Windows and Pro X for Mac. I know virtually nothing about scripting, but I know that it can be done.
Thanks in advance for any help!
Theresa

Do I add this code to the group's action, or to individual radio button actions?
To each individual radio-button.
Do I make the dropdowns visible or hidden?
Their visibility will be determined by the state of the radio-buttons. As default you can set them to be hidden, when no radio button is selected.
Do I put any code in the dropdown properties, or just in the radio button properties?
Just in the radio buttons.
And when you say "embed this code at the doc-level," what does that mean?
Go to Advanced - Document Processing - Document JavaScripts...
Create a new script, remove the default text that appears in the window and paste the code I provided instead.

Z-index question with dropdown menu and swf file

I am currently using All Web Menus for the navigation of my
site. I want to switch to Pop Menu Magic. The All Web Menu works
fine with the swf file I have underneath it on my page but when I
put in the pop menu magic the dropdown part goes behind the swf
file. The z-index is still the same. Is there something else I
should be looking at?
Thanks for any help.

see if this helps:
http://www.projectseven.com/support/answers.asp?id=127
andrea_msc wrote:
> I am currently using All Web Menus for the navigation of
my site. I want to
> switch to Pop Menu Magic. The All Web Menu works fine
with the swf file I have
> underneath it on my page but when I put in the pop menu
magic the dropdown part
> goes behind the swf file. The z-index is still the same.
Is there something
> else I should be looking at?
>
> Thanks for any help.
>

Horizontal Navigation with Dropdown Menu

Hello!
I am trying to put together a site with Horizontal navigation with items in the dropdown. I built my plan with main pages and child pages, and added my horizontal navigation on the Master page, but when I go to preview, I don't see any of my dropdown (child) pages. Is there any way to fix this? (I've attached a screenshot, hopefully this will help clarify)......

Hello,
Please click on the tiny white Arrow in the blue circle which comes up at the top right of the Menu. And there change the Menu type from Top Level pages to All pages.
Note : Child pages on the same level in Plan view are listed vertically in a Horizontal Menu.
Regards,
Sachin

Help with dropdown menu

This is the code for the select menu. It all work okay. The
problem is that I need to determine the selection value later in an
if statement so I can change code based on the selection. No matter
what sytax I use to reference the selection box, I get an error:
Expected Then. Please someone help!!
<select name="id<% = rs("ProductId")%>selectcolor"
id="selectcolor" onChange="colorchoice">
<%
While (NOT rscolors.EOF)
%>
<% if Left(Request.Querystring("maingroup"), 1)= "A"
then%>
<option
value="<%=(rscolors.Fields.Item("ColorSuffix").Value)%>"
selected><%=(rscolors.Fields.Item("Color").Value)%></option>
<%elseIF rscolors("ColorSuffix") < 49 Then%>
<option
value="<%=(rscolors.Fields.Item("ColorSuffix").Value)%>"><%=(rscolors.Fields.Item("Color" ).Value)%></option>
<%else%>
<%end if %>
<% rscolors.MoveNext()%>
<%Wend
</select>

With using straight code you will not be able to determine
the selected
value of a dropdown until the form is processed. However you
may be able to
get a client side javascript that will grab the values as the
dropdown
changes.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"Reannon" <[email protected]> wrote in
message
news:et9k0d$cfg$[email protected]..
> This is the code for the select menu. It all work okay.
The problem is
> that I
> need to determine the selection value later in an if
statement so I can
> change
> code based on the selection. No matter what sytax I use
to reference the
> selection box, I get an error: Expected Then. Please
someone help!!
>
> <select name="id<% =
rs("ProductId")%>selectcolor" id="selectcolor"
> onChange="colorchoice">
> <%
> While (NOT rscolors.EOF)
> %>
> <% if Left(Request.Querystring("maingroup"), 1)= "A"
then%>
> <option
value="<%=(rscolors.Fields.Item("ColorSuffix").Value)%>"
>
selected><%=(rscolors.Fields.Item("Color").Value)%></option>
> <%elseIF rscolors("ColorSuffix") < 49 Then%>
> <option
>
value="<%=(rscolors.Fields.Item("ColorSuffix").Value)%>"><%=(rscolors.Fields.Ite
> m("Color").Value)%></option>
> <%else%>
> <%end if %>
> <% rscolors.MoveNext()%>
>
> <%Wend
> </select>
>

In FF 23.0, Bookmarks (with dropdown menu) does not stick.

Why would mozilla peeps would make this very useful button disappear? In what way it helps the users? It looks like their Vista moment.
For now, I have re-installed FF 22.0 version. Hope they fix this bug soon.

Add code to the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#bookmarks-menu-button { display: -moz-box !important; }</nowiki></pre>

Issue with dropdown menu on Custom List Form

Hello everyone,
Recently I created a custom list with a few lookup columns in it. When I open the form in Internet Explorer 9 or 10, the dropdowns pertaining to the lookup columns are extremently wide, even though each dropdown only contains 2 characters. However,
if I open the form in Google Chome, and Firefox, the dropdowns are displayed properly.
IE 9 Dropdown:
Chrome Dropdown:
If anybody has run into this issue and can point me in the right diretion, I will appreciate it. Thank you
Fausto Capellan, Jr - SharePoint Admin

Hi Fausto,
According to your description, my understanding is that the drop-down list boxes of the lookup column became wide when using IE 9 or 10.
Did you customize the list form in InfoPath?
Per my test, the width of the drop-down list boxes can be customized in InfoPath.
I tested in my environment, and the lookup column worked fine in IE 9 or 10.
I recommend to add the SharePoint site to Compatibility View in IE to see if the issue still occurs.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Help with dropdown menu in JCombo box,Pleaseeeeeee

Hi,
I posted earlier but I`II try again. Someone must know how to do this. I have a JComboBox and I want the drop down menu to be a bit wider then the comboBox.
I tried using this method
public void setPreferredSize()
          Dimension d = jcbo.getPreferredSize(d);
          jcbo.setPreferredSize(new Dimension(20, d.height));
          jcbo.setPopupWidth(d.width);
but I recieved a couldn`t resolve symbol error for the last line.
I imported these into the program]
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
Is there something else I should of imported as well to make this work, or is it another problem all together.Any help would be greatly appreciated.

Hi , What I want to do is have the dropmenu a bit wider then the comboBox. Here is my code.Please excuse any odd ball mistakes, At this point I have been trying anything.This is an exercise that I have to do fo a java assignment, Hence the weird GUI. In the example pic they gave me.It shows the dropmenu a bit wider than the comboBox, I am sure they through this in to screw with my brain, I have put comment tags Around the stuff I tried to use. Any help with this would be greatly appreciated.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
//import javax.swing.plaf.basic.*;
public class Exercise9_3 extends JFrame implements ActionListener
     private JTextField nameField;
     private JTextArea nameArea;
     private JButton storeButton;
     private JComboBox jcbo;
     private JPopupMenu popup;
     protected int popupWidth;
     String newline = "\n";
     public Exercise9_3()
          createComponets();
          addComponets();
          setTitle("Exercise9_3");
     private void createComponets ()
          nameField = new JTextField(19);
          nameArea = new JTextArea(10, 15);
          storeButton = new JButton("Store");
          storeButton.addActionListener(this);
          jcbo = new JComboBox();
          jcbo.addActionListener(this);
     /*8public void setPreferredSize()
          Dimension d = jcbo.getPreferredSize(d);
          //jcbo.setPreferredSize(new Dimension(20, d.height));
          //jcbo.setPopupWidth(d.width);
     private void addComponets()
          JPanel p1 = new JPanel();
          p1.setLayout (new FlowLayout());
          p1.add(nameField);
          p1.add(nameArea);
          p1.add(jcbo);
          JPanel p2 = new JPanel();
          p2.setLayout (new FlowLayout());
          p2.add (storeButton);
          getContentPane().setLayout(new BorderLayout());
          getContentPane().add(p1, BorderLayout.CENTER);
          getContentPane().add(p2, BorderLayout.SOUTH);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == storeButton)
               String s = nameField.getText();
               jcbo.addItem(s);
               jcbo.setSelectedItem(s);
               String textArea = s ;
               String text = nameField.getText();
               nameArea.append(text + newline);
     nameField.selectAll();
     nameField.setText("");
     nameField.requestFocus();
          if (e.getSource() == jcbo)
/**retrieve the input as a string*/
String selectedName = (String)jcbo.getSelectedItem();
/**set the name that was selected from the ComboBox and add it to textfield*/
nameField.setText(selectedName);
     public static void main(String [] args)
          Exercise9_3 frame = new Exercise9_3();
          frame.setDefaultCloseOperation(EXIT_ON_CLOSE);
          frame.pack();
          frame.setVisible(true);
          Dimension screenSize = Toolkit.getDefaultToolkit().getScreenSize();
          int screenWidth = screenSize.width;
          int screenHeight = screenSize.height;
          // Get dimension of the frame
          Dimension frameSize = frame.getSize();
          int x = (screenWidth - frameSize.width)/2;
          int y = (screenHeight- frameSize.height)/2;
     frame.setLocation(x,y);

Need help on creating a button with additional drop down menu

Hi,
I need to have a button with additional menu as we see in IE, please help me how can i do that. I want the button to be displayed normally with an additional arrow on the right side when clicked on it shows pop up menu. Please let me know if the solution has already there in the forum. I searched and couldn't get one .. :(

Hey there buddy.
Try this:
http://www.koders.com/java/fid20361AB8C305DE9B9110DE90F2154FC43AA0E57C.aspx
Jason.

Dropdown Menu CSS Style

Hi!
I am trying to create a dropdown menu in Dreamweaver. I have watched several tutorials and read many how-to guides and my html looks fine, but editing the style is really throwing me off. I am a beginner to Dreamweaver, so I am unsure of the properties I need to make this right. The code below, when I hover over the first button the dropdown menu goes behind the other two buttons. I need the dropmenu to go off to the side of the buttons and down. If not that, I can align the buttons to go horizontal, so they aren't being covered. I hope that makes sense.
Thank you in advance!!
-M
HTML
<div class="dropdown" id="dropdown" style="text-align: left;">
<ul>
        <li><a href="#">Americas</a>
           <ul>
                   <li><a href="#">Connecticut</a></li>
                    <li><a href="#">Ohio</a></li>
                    <li><a href="#">Vermont</a></li>
                    <li><a href="#">California</a></li>
                    <li><a href="#">Canada</a></li>
                    <li><a href="#">Brazil</a></li>
           </ul>
        </li>
</ul>
<ul>
       <li><a href="#">China</a>
             <ul>
                     <li><a href="#">China</a></li>
               </ul>
        </li>
</ul>
<ul>
        <li><a href="#">Europe</a>
            <ul>
               <li><a href="#">France</a></li>
               <li><a href="#">UK</a></li>
            </ul>
        </li>
</ul>
</div>
STYLE
#dropdown {
margin: 0;
width: 150px;
font-family: Gotham, "Helvetica Neue", Helvetica, Arial, sans-serif;
#dropdown ul {
margin: 0;
padding: 0;
line-height: 30px;
#dropdown li {
    margin:0;
    padding:0;
    list-style:none;
    float:left;
    position:relative;
#dropdown ul li a {
text-align: center;
height: 30px;
width: 150px;
display: block;
color: #000;
text-decoration: none;
border: 1px solid #000;
text-shadow: 1px 1px 1px #000;
background: #CCC;
#dropdown ul ul {
position:absolute;
visibility:hidden;
top:32px;
font-family: Gotham, "Helvetica Neue", Helvetica, Arial, sans-serif;
#dropdown ul li:hover ul {
visibility:visible;
position:absolute;
   #dropdown li:hover {
background: #7D92C6;
float: left;
    #dropdown ul li:hover ul li a:hover {
    color:#000;
    background:#7D92C6;
#dropdown a:hover {
color:#000;
background: #7D92C6;
.clearFloat {
    clear:both;
    margin:0;
    padding:0;

Are you doing this as an execise in learning or is it for a real website. I ask because if the latter why not just use a tested and proven commercial product and be done with it? I have used the PVII (http://www.projectseven.com) products for years and can't recommend them highly enough.

How to create a dropdown menu with sub buttons that link back to the labels on click.

im trying to create a dropdown menu buttons that when you rollover to the top central button the button it opens up like a drop down menu would containg two other subsectional buttons. This makes the sub sectional buttons seperate from the main stage making it difficult to simply give them a on click, sym.play("label") function.
the buttons work like this in symbols or sections stage/panel/homebutton inside home button is group dev containg another group dev containg the button which I need to link back to a "label" in the /panel/ symbol or section. Thank you very much.

pdp_1 wrote:
Hi!
I would like to create a DVD menu that offers two languages. So the first page gives two options: Language 1 and Language 2. Then depending on which language you choose, you go to a menu that proposes different videos and a photo slideshow.
Regardless on which language button you click on initially, you get the same content but in different languages.
I've been looking at Premiere's templates, which I can certainly customize, but I really don't see how to create the double menu. Does anybody have an idea?
Put the video with the first language on the timeline followed by the video with the second language. Use chapter markers so you can have each video as a chapter in the menu.
I use Premiere Pro, so I can't give more specific directions. Perhaps somebody like ATR will chime in.
Also, I have another question: can I put videos from different projects in the same DVD with Premiere or must all of the videos that go into the DVD be in the same project?
Thank you very much!!!
pdp1
They must be in the same project.

Can't get my dropdown menu buttons to link to another scene.

I can’t get my dropdown menu buttons to link to other scenes within the same Flash file. The buttons are unresponsive during playback – as if no code were attached to it. Here’s what I have as my AS2 code on the dropped button that is supposed to link to the "Published" scene/page:
on(release){
_root.gotoAndPlay("published", 1);
I'm working with Actionscript 2.0 in Flash CS6.
Any help would be appreciated!
Thanks,
Robert

Hi kglab,
I do get these compile errors:
Scene=published, layer=Buttons, frame=1, Line 1 Statement must appear within on handler
Scene=published, layer=Buttons, frame=1, Line 2 Statement must appear within on handler
But, I think you are correct about the setInterval Loop. On the home scene I’ve created a movie symbol which is set to call another swf file:
loadMovie("frontSlideshow.swf", _root.movie1);
This frontSlideshow.swf file has the following code in every 10 frames:
this.stop();
pause = function ()
play();
clearInterval(pausei);
pausei = setInterval(pause, 5000);
This will pause the timeframe every 5 seconds before sliding to the next frame so that each image can be viewed. It seems odd that the code from this subclass file would affect the timeframe of the main class/file where the “movie1” symbol is located.
Best,
Rob

Button with dropdown menu

Similar Messages

Maybe you are looking for