Buy book iphoto- error at software version check

Assistance required in BUYing my iphoto book.
Does not allow me to BUY.
Requires a forced shutdown at the update software check page.
Any advice?

Sadly, no change after updating v10.8.5(combo). A normal boot with an attempt to "buy book" from iPhoto, gets almost to the end of the upload and then gives me the following error:
In Safe boot, I get to the beginning of the Assembly process and iPhoto crashes. Here is a portion of the problem details:
I compiled my book on Thursday evening, thinking that would be the painstaking part. Purchasing it has become too much of a time consuming adventure! I did call Apple Technical Support last evening and the service agent suggested that I check the Apple Support Community discussions, so thank you for taking a greater interest in my problem.
One other thing I found regarding problems submitting photobook orders is at the bottom of http://support.apple.com/kb/TS2516. An excerpt from this webpage is below, but I can't find the "NetServices" entry in my Keychain Access window to try this fix. Do you think this is a piece to my puzzle or simply old info as it was last modified on May 24, 2012?
Again, I was able to order a photocard (cancelled the order within 90 minute window) as a test, so I don't believe I have an account problem.
excerpt:
If you are using iPhoto '08 or iPhoto '09 and are unable to submit your order after following the steps above, please follow these steps to reset your Keychain:
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
If you are unsuccessful with submitting your order, please contact Apple Technical Support.

Similar Messages

Ordering books-iphoto 08 won't let me buy books i made in previous versions

help! i just upgraded last night to iphoto08, but tried to order books i'd made in previous versions today and i'm getting the message that "item is not available" or something to that effect. the books show up as i made them, but i can't order hard copies. do i have to recreate the books? or is there something i can do?

Welcome to the Apple Discussions. I had a book, the Storybook theme, in progress when I converted. iPhoto gave me a warning that the theme was no longer available but I could continue with the as long as I didn't try changing to another theme and then change back. However, that theme had the dust jacket feature instead of the photo on the front cover.
If you still have or have access to iPhoto 6 you could create a new library and recreate the book with that theme and see if you can order it. I'm thinking of trying the same thing.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Trying to buy book. iPhoto says I have not filled some of the frames but I have.

I have finished my book and I am trying to buy. A notice is coming up that says some of the frames are empty and will have to be filled.
I have a picture in every frame so what could be wrong?

Lindsay,
A notice is coming up that says some of the frames are empty and will have to be filled.
You may have used default pictures, for example a picture background. And you will not see the missing background, if your photo is full page. See LarryHN'S post here:
Re: I am attempting to buy a photo book but it says that I have not filled the photo frames which I have.?? How to circumvent and buy this book? (This is my fifth book and first time with problems.
Also, some of the Themes have captions below the photos. Have you edited all captions? Some of them may still be showing the default entries by Apple.
Compare the Preview of the book with what you are seeing in the Browser, and check for missing photos.
iPhoto '11: Preview a book, card, or calendar before you order or print it
Regards
Léonie

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Error via ODBC: wrong dll version (check: SQLTCPx.dll)

Hi,
after system, MAXDB 7.06.03 & database studio installation on new server my application reports error: wrong dll version (check: SQLTCPx.dll)
On previous server connection via ODBC was ok.
I have checked all available ODBC Drivers (MAXDB, SAPDB, SAPDB 7.4) and it does nothing.
Connection via .net driver (without ODBC) works fine.
How can I get correct version of dll ?
Which version is correct?
This dll currently exists in system: v. 7.6.3.0 (C:\Program Files\sdb\DBM) or v. 7.6.2.0 (C:\Program Files\sdb\programs\pgm)
Best regards,
Lukasz
MAXDB 7.06.03.07 Community Edition, WIN 2k3 x32 Ent. ed.
ODBC:
Version                   7.6.03 Build 007-123-157-515
Object Mode           32 bit
Test File                  pgm/sqlod32.dll
Make Id                  256246
Installation Date     24.01.2008
Size                         3045874 bytes
Checksum               293d54b1f67025353bc9cfdbe1dd84f3

Hello Wolfgang,
problem is after Database Studio installation.
My test system is:
OS: Windows XP Sp2
MAXDB Software:
1) MAXDB 7.6.03.07 (install file: maxdb-all-win-32bit.exe, server+client installation)
2) SQL Studio 7.6.03.02 (174235)
3) Database manager 7.6.03.02
If i install MaxdbStudio (install file: maxdb-studio-win-32bit.exe) on that environment I'll get error :wrong dll version (check: SQLTCPx.dll) in all known connections via ODBC.
Connections via odbc means for me connection via ODBC Source witch uses MAXDB (unicode) driver, file: SQLODE32W.DLL
(Control panel => Administrative tools => ODBC Sources => Add source => MAXDB (unicode) ... etc.).
SQL Studio, database manager and maxdb studio starts and works correctly.
Connections via MaxDB ADO.NET Data Provider works correctly (another application).
Error occurs in Windows 2003 as well (the same software).
Best regards,
Lukasz

AutoPatch version checking issue.

Hi,
I am applying the patch using adpatch utility, and getting following error.
Please advise.
APPS:12.0.6
Os: Linux
Performing version checking...
Cannot open patch file:
/d01/oracle/SILP_8017/apps/apps_st/appl/ad/12.0.0/bin/bom/forms/US/CSTFELCU.fmb
Error occurred in version checking.
See above error messages or AutoPatch log file for details.
Exiting AutoPatch...
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
You should check the file
/d01/oracle/SILP_8017/apps/apps_st/appl/admin/SILP17/log/adpatch.log
for errors.
Thanks,

Hi;
Performing version checking...
Cannot open patch file:
/d01/oracle/SILP_8017/apps/apps_st/appl/ad/12.0.0/bin/bom/forms/US/CSTFELCU.fmbYour applmgr user has permission on this path?If no give the permission right and retest
If you have right permisson then please check log file for error details.
You should check the file
/d01/oracle/SILP_8017/apps/apps_st/appl/admin/SILP17/log/adpatch.logRegards
Helios

All UI of iPhone 5 is iOS7 but software version show iOS 8.1.3

I using iPhone 5 with iOS 8.x.x. I backup my iPhone 5 data on iCloud automatically.
Last month, my iPhone 5 has problem with battery issue. I join "iPhone 5 Battery Replacement Program" a few weeks later my iPhone 5 is come back to me with new device. I turn it on and want to restore my backup from icloud but it not work. I'm avoid it by choose "Set Up as New iPhone."
When I checking software version, the result is iOS 8.1.3 but I noticed that all UI i.e. menu icon, text ,and order is same with iOS 7 UI.
Is it correct that all UI of iPhone 5 is same with ios7 when result of software version checking is iOS 8.1.3?
And
Why I can't restore data from iCloud?

Hey there naphon,
It sounds like you are concerned that the interface appears to be iOS 7 and you need to restore your iCloud backup to get your data back. You can use this article to create a local backup of your phone to iTunes and then restore the devices software:
How to erase your iOS device and then set it up as a new device or restore it from backups
When prompted you should be able to select the iCloud backup and let that restore from there.
Thank you for using Apple Support Communities.
All the best,
Sterling

GCC version check fail in nVidia installer

I have been working on installing Arch64 on my machine, and have been successful up to the installation of the proprietary nVidia drivers. I am using a GeForce 9800 GTX, and since there are no stable drivers for this card, I am using the beta drivers on their site (they do not seem to be in the repos). When I try to run the installing, I get the following error:
The CC version check falied:
The compiler used to compile the kernel (gcc 4.2) does not exactly match the current compiler (gcc 4.3). The Linux 2.6 kernel module loader rejects kernel modules built with a version of gcc that does not exactly match that of the compiler used to build the running kernel.
If you know what you are doing and want to ignore the gcc version check, select "No" to continue installation. Otherwise, select "Yes to abort installation, set the CC environment variable to the name of the compiler used to compile your kernel, and restart installation. Abort now?
If I understand this correctly, I need to downgrade GCC to version 4.3. How would I go about doing this with Pacman? Also, shouldn't the compiler in the repos be the same as the one which created the kernel?
Thanks in advanced.

you are not supposed to do that.. it will break your system, however there is a PKGBUILD for those beta drivers in the aur¹, you can read how to build your own packages here², also useful is this page³
btw welcome to the forums
1.- aur.archilinux.org
2.-http://wiki.archlinux.org/index.php/Makepkg
3.-http://wiki.archlinux.org/index.php/ABS

Remote Agent: OLT returns Version Check Failed to Match

I am attempting to use remote agents. I have tried both Windows and Linux agents with identical results.
After running a test with one of the remote agents the server shows:
Status Current Error
Orphaned Agent Version Check failed to Match
Client shows:
18:19:04,198 INFO [Messenger] Try server=t3://192.168.32.102:8088 queue=queue/AgentPoolNotificationQueue
18:19:04,259 INFO [Messenger] Got ConnectionFactory
18:19:04,273 INFO [Messenger] Got queue queue/AgentPoolNotificationQueue
18:19:04,291 INFO [Messenger] Created queue connection.
18:19:04,304 INFO [Messenger] Created queue session.
18:19:04,316 INFO [Messenger] Connected to server=t3://192.168.32.102:8088 queue=queue/AgentPoolNotificationQueue
18:19:04,316 INFO [Request] [URL:t3://192.168.32.102:8088;Requestor Username: oats;Requestor Key:99bb5c62-f65a-4dbc-b8cb-db44bbd3ece4;Requestor Queue:queue/AgentPoolNotificationQueue;Request ID:6;Request:stopagent;] - authentication successful
18:19:04,316 ERROR [EmpStartMain] Unknown agent ID: agId14_rnda167a6bd-2f25-4be8-b449-903b9bb7cd40
Any help is much appreciated. Searched Metalink and didn't find anything on this specific error.
Thanks,
John A. Booth
http://www.metavero.com

The wording in the original error "Version Check failed to Match" makes me think this is similar to something I encountered once after installing a small patch release. You need to make sure the Agent installed on the remote machine is the same version as the controller.
e.g. If you had installed OATSv9.00 on both controller and agent machines and then upgraded JUST the controller to OATSv9.01 the controller would no longer be able to talk to the v9.00 agent on the remote machine.
I could be wrong, but that's essentially what I found with one of the earlier v8 upgrades.
Try upgrading the agent on your remote machine(s) with the same installation you have on your controller (but only install the agent, not the whole OATS paclage).
Edited by: IHodgetts on Jan 28, 2010 4:55 PM

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

Trying to "buy book" in Iphoto...getting error message

I am trying to buy an Iphoto book that I have created and I am getting the following error message:
+Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book.+
I have created and successfully purchased quite a few different books in the past, without a hitch. I have gone through each page and can not find the problem, has anyone else seen this before?? Or perhaps is there somewhere that will tell me what page(s) the problem could be on?
Thank you

kmth
welcome to the Apple user discussion forums
yes - other have seen this - about 1 out of 5 of the posts in the photo services forum - http://discussions.apple.com/forum.jspa?forumID=1197 - relate to this and the answer is very simple - you have a missing photo - the most likely place is on a photo background page -the pages with a gray background or with a gray palm tree - and it can be hidden behind a full page photo - see my write up here for a longer description on how to solve this
LN
Message was edited by: LarryHN

I am unable to Check out when buying an iPhoto Book. Any ideas?

I am unable to Check Out when buying an iPhoto Book. Any ideas?

In Australia? There Print Store there is down and has been for a few days. Apple say check back tomorrow. Or the next day. Or the day after...

IPhoto Buy Book Error

I have completely finished my book in iPhoto, and when I click on "Buy Book," it says ... "Your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can proceed with this book."
I have been through the book 10 times, and I don't see any missing photos. Any thoughts on things I can try?

If you have a one photo per page layout check to make sure it's not like this one:
These are easy to miss.
OT

IPhoto: solution when "buy book" generates an error.

Hello all,
I thought I post this. Maybe this will help others who face the same problem.
I created a book in iPhoto. After clicking the "Buy Book" button, I received the message:
     <i>There was a problem contacting the Apple online store. Please try again.</i>
I searched the internet and found several other people having the same problem.
Several solutions were also given like:
     1. Temporarily tun of the firewall
     2. Be sure the select, in Preferences in iPhoto under Advanced the book store that matches the country of your Apple ID
     3. Be sure to have the correct and valid credit card data entered in your Apple ID
     4. Be sure the password of your Apple ID is correct
     5. Go to iTunes, "purchase" a free App and if you are prompted to accept Apples policy, do so and try again to buy your book
     6. Apple online store may be down or to busy, try again on a different time.
However, none of these solutions worked for me.
After digging further I finally found the solution (at least for me).
If you have ever made, in System Preferences => Language and Text, under Formats any change, than "Region" will show "Customized" instead of your country. I live in the Netherlands, the default for short date is to show years in two digits. I changed this once (in the past) to show dates with four digits years.
Resetting "Region" to match the country of your Apple ID did the trick.
I was then able to order my book in iPhoto.
Kind regards,
emeu1

Try the iPhoto community forum.

IPhoto "buy book" order fails at end of upload

I have created a 20 pg hard-covered book in iPhoto which I can preview with no problems and I can create a pdf version of it (34.6MB). However, when attempting to buy the book, I get an error message with CANCEL/RETRY as my options at the very end of the upload process. I have tried the following, but still no success:
(1) safe boot - iPhoto crashes immediately at "BUY BOOK" selection
(2) set energy savers to off - dies at end of upload
(3) duplicated the book and tried to purchase duplicated version - dies at end of upload
(4) changed the theme of the book and tried to purchase it - dies at end of upload
(5) created a simple card and purchased it with no problems (so my account is fine) and I cancelled the order thereafter
Each page of the book has 2 portrait photos with minimal text underneath. The largest photo size is 4.6MB. All photos are JPGs. I rebooted my iMac each time before trying (2)-(5) above. I am running version 9.4.3 (720.91) of iPhoto. I have turned off my TimeMachine backup too and have all other applications closed when I attempt to purchase the book. To date, I have never had a problem purchasing books (last one in Dec 2012).
Thanks for any suggestions!

Sadly, no change after updating v10.8.5(combo). A normal boot with an attempt to "buy book" from iPhoto, gets almost to the end of the upload and then gives me the following error:
In Safe boot, I get to the beginning of the Assembly process and iPhoto crashes. Here is a portion of the problem details:
I compiled my book on Thursday evening, thinking that would be the painstaking part. Purchasing it has become too much of a time consuming adventure! I did call Apple Technical Support last evening and the service agent suggested that I check the Apple Support Community discussions, so thank you for taking a greater interest in my problem.
One other thing I found regarding problems submitting photobook orders is at the bottom of http://support.apple.com/kb/TS2516. An excerpt from this webpage is below, but I can't find the "NetServices" entry in my Keychain Access window to try this fix. Do you think this is a piece to my puzzle or simply old info as it was last modified on May 24, 2012?
Again, I was able to order a photocard (cancelled the order within 90 minute window) as a test, so I don't believe I have an account problem.
excerpt:
If you are using iPhoto '08 or iPhoto '09 and are unable to submit your order after following the steps above, please follow these steps to reset your Keychain:
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
If you are unsuccessful with submitting your order, please contact Apple Technical Support.

Buy book iphoto- error at software version check

Similar Messages

Maybe you are looking for