Buyer Business Package

Hi All,
I need advice or guide on Buyer Business Package - Backend configuration. This is much related to MM bacnend configuration. I have read the documentation of Business Package for Buyers mySAP ERP 2005/NW Portal 7.0 -> http://help.sap.com/saphelp_erp2005/helpdata/en/b4/05874018c0ce62e10000000a155106/frameset.htm
However, I still couldnt find the solution for the backend configuration. I realy need your help
Regards
Ismail

Hi Namrata,
Can you run the BI Diagnostic tool to get some clues.
Also refer to the note 917950.
Thanks,
Nikhil

Similar Messages

Business Packages Maintenance Planner 1.2 and Buyer 1.4 implementation

Hi Team,
We would like to implement below Business Packages on our landscape.
Business Package for Maintenance Planner 1.2
Business Package for Buyers 1.4
Could any one advice any technical documentation with steps to be followed to implement the entire BPs.
I'm not able to find any standard PDF to follow, that would be really helpful if any one could provide template document with the steps to be followed
Thanks & Regards,
Ramesh

Hi,
No need to worry. This is pretty straightforward. I have deployed many BPs using the following approach.
For each BP that is available, you also have corresponding config steps in help.sap.com.
For Business Package for Maintenance Planner 1.2 - http://help.sap.com/erp2005_ehp_04/helpdata/en/46/66a9bd5d9d5de5e10000000a1553f6/frameset.htm
For Business Package for Buyer 1.4 -
http://help.sap.com/erp2005_ehp_05/helpdata/EN/4b/8d453396515685e10000000a42189b/frameset.htm
You need to proceed as follows: (I am assuming you have already downloaded the package files)
1. Deploy the BP files using JSPM.
2. Follow the URLs for each BP above and you will find prerequisites and technical description and configuration information in these URLs (expand the page to get the frame on the left hand as well.) Follow the config steps, they would be pretty well descriptive.
Once done, you can assign the appropriate roles to the users who are going to use these functionalities. The roles are also documented in the same URLs.
Regards,
Shitij

Required detailed information on "Business Package for Buyer"

Hi All,
Can anyone provide more detailed information on "Business Package for Buyer" . I am basically looking for some demo, sales presentation, more on what the package is providing with screen shots to see the look and feel.
Regards,
Vishal

Hi
It's basically an E-Portal solution, which covers majority of enhanced features. (E-procurement, etc)..
Some Related links ->
http://www.sap.com/solutions/business-suite/srm/pdf/BWP_SupplierEnablement.pdf
http://www.sap.com/services/pdf/BWP_SAP_Best_Practices_for_Baseline_Package.pdf
http://www.sap.com/platform/netweaver/pdf/BWP_Portal_Content.pdf
http://download.sap.com/download.epd?context=642A6604589217F513EAAF63FC1EC17B4A0BCA320C09F96DDDBCD0C0AD46BCDE878D0DA7ED26956FC637FB082E4DD6D3D3D8890CECA87ABA
http://www.sap.com/solutions/business-suite/srm/pdf/yorkshirewater.pdf
http://www.sap.com/platform/netweaver/pdf/BWP_Security.pdf
http://www.sap.com/industries/professionalservices/pdf/CS_ESPRIT.pdf
http://www.sap.com/industries/millproducts/pdf/CS_CERATIZIT.pdf
http://www.sap.com/industries/professionalservices/pdf/SAP_Project_Res_and_Fin_Mgt.pdf
http://www.sap.com/solutions/pdf/Image.pdf
Note -> Best place to search in it for more details using SAP Official website - www.sap.com
Regards
- Atul

Relationship between Portal and back-end roles in business package

Hi all,
I wonder how technically works on the backend system when I install a BP for SAP EP. Let's say for example that I installed on the portal the business package for SRM. I will have on the Portal some roles configured (buyer, supplier, invoice manager, etc), and some iviews in them organized by pages and workest.
How can I see the relations with those roles and the roles on the SRM backend system? And then: if I modify a standard role on the Portal, adding new functionalites (iviews), I do update the backend role? We are going to implement SSO, and users will be the same on Portal and backend system. But that also means I need to assign users to backend roles on the backend system, isn't it?
I would be glad to you if someone can provide me also a link to a document explaining the relationshipe between backend roles management and portal roles management.
Thanks a lot,
Valentina

To add.. no, you will not update a backend SRM role if you update an iView on the Portal. The Backend roles will always be assigned to the user via PFCG and do not change automatically with the Portal roles.
This help document might help you understand the concept better (Look at the Permissions vs Authorisations section):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c605c690-0201-0010-e8b5-94677245a46b
Hope this helps. I am sure SAP/SDN library has many such documents that you can read through.
Sudha
Message was edited by:
Sudha Mohan

Business Package configuration steps:

Hello Experts,
We have installed following SRM Business Packages on Portal.
BP ERP05 BUYER 1.41
BP ERP05 COMMON PARTS 1.41
BP SRM 7.0
BP SUPP COLL CONT 4.0
Are there any specific configuration steps after installing Business Packages? Can you please let me know the documentation link for it.
Regards,
Arpit.

Dear Bill,
URL you have given is quite generic one. I have already searched there for 'Business Package configuration steps"
( SRM 7.0 , EP :7.0 EHp1 ).
Are there any specific configuration steps for business Packages ?
Regards,
Arpit.

Portal business Packages

Hi,
Can we implment SAP business packages like Biller direct, buyer on External Facing portal.
Also I am unable to find documentation on maintaining multi-lingual External facing portal.
Regards,
Namrata

maintaining multi-lingual External facing portal
The SAP Portal is multi-lingual by default (incl. left to right, right to left), and the EFP isn't really different from the "normal" portal as the same language identification and content delivery principles apply. It get's more interesting when dealing with anonymous users, WPC content, etc, but nothing really over complicated.
br,
Tobias

Business Package for ECC6.0 EHP 4 Installation Guide

Hello Experts,
We have a reqt to install BP for ESS MSS compatible with ECC EHP 4 and identified below versions
BP ERP05 ESS 1.41
BP ERP05 MSS 1.41
BP ERP05 COMMON PARTS 1.41
BP ERP05 BUYER 1.41
BP ERP05 HR ADMINISTRATOR 1.11
....few others
Queries below -
1 - Link : [http://help.sap.com/erp2005_ehp_04/helpdata/EN/76/77594d165144a1a9bff9aae1e26b26/frameset.htm] under prerequisites : Business Packages are mentioned:
○       Business Package for Manager Self-Service (SAP ERP) 1.3
○       Business Package for Common Parts (SAP ERP) 1.3
○       Business Package for Project Self-Service (SAP ERP) 1.0
○       Business Package for HR Administrator (SAP ERP) 1.1
Should we upload the above BP before we deploy main packages like ESS 1.41, MSS 1.41 and HR Admin 1.11?
2 - We need to download and install BP from both paths - "installation and Upgrades" and "support packages and patches" in SMP one after the other?
3 - Installation sequence to be followed is PCUI_GP followed by Common Parts?
4 - I am unable to locate any proper installation guide for BP.
Thanks for your inputs,
Dhanz

Hi Dhanz
See the following guide for details
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0df0afb-44fb-2b10-46b1-c026264bcbc4
In order to calculate which SP packages to download from /swdc please see
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/marcio+leoni
--->HOW TO GET RID OF SP STACK MISMATCH ISSUES
This tells you which BP or XSS packages work together and which back-end SP levels works with them
Good luck
Stuart

Best Practice in using Business Packages

Hi All,
Are there any Best Practices in the use of Business Package content? Do you assign the Roles delivered by the Business Package and do you make changes to the original iViews?
or
Do you copy the content delivered in the Business Package to a new folder and work with there?
These questions are purely at the configuration level and not at the Java coding level. For instance if I want to turn of the iView Tray, or change a parameter such as height, or even remove an iView from a page or Role.
I would like to know the various approaches the SDN community uses and the different challenges and benefits that result in each approach.
Look forward to hearing from you all
Paul

Hi Paul,
I also build my own roles. The only time I might use the standard roles is for demo purposes early in a project. You will find that in some cases the business packages like MSS don't always even include standard roles, so you have no choice but to build.
I never change any of the standard iViews/Pages/Worksets - ever.
The most contentious issue seems to be whether to do a full or delta link copy of the standard objects. I tend to initially do a full copy of the objects into a custom folder set in the PCD and modify those. Then I only use delta links from Page to iViews where I need the option of setting different properties for the same iView if it appears in multiple pages. Delta links can be a bit flakey at times, so I tend to only use them where I have to. I suspect that I may get to a point where I don't use them at all.
Just my 2 cents worth....
Regards,
John

Key Figure Monitor in Prod Superviosr business package

hi,
I am trying to set up Key Figure monitor in the Production supervioser business package. I am getting the below error
Invalid/No Context ID
The application 'Generic Key Figure Monitor' requires a unique context ID. The context ID is a four-character alphanumeric code that you must enter as the application parameter I_CONTEXT_ID in the starting iView in the Enterprise Portal.
Contact your system administrator
I have set up the I_CONTEXT_ID in the iview in Portal and defined the key figure categories and key figures in R3.
I would like to knwo the relation between I_CONTEXT_ID and Key figure and where is it set ?
Can some one help in the steps to get this working.
Appreciate your help
Regards
PN
Message was edited by:
        Portal Newbie

Not sure if you got an answer for this question. Just saw this..
See SAP Help URL http://help.sap.com/saphelp_erp2005/helpdata/en/42/ef6861370a1bcae10000000a11466f/content.htm
Excerpt below from SAP Help on Context ID:
Including the Generic Key Figure Monitor in the SAP NetWeaver Portal
Use
You only have to carry out this procedure if you want to put together your own portal role using various parts developed by SAP or by yourself.
Prerequisites
·        You are in the content administration for the Portal.
·        You have created a role in the portal.
·        You want to include the KEY_FIGURE_MONITOR iView from the Common Parts business package in the portal page of your role using delta link. The iView is called Key Figure Monitor.
·        In the I_CONTEXT_ID parameter, you have created a unique four-digit alphanumerical key for the generic key figure monitor that identifies an instance of the key figure monitor within the role. If you want to use the key figure monitor more than once in your role, you must create a unique key each time you use the generic key figure monitor in the role.
You have created a role in the portal. This role contains two iViews, which contain the generic key figure monitor. iView aaa.bbb.ccc and iView xxx.yyy.zzz. Set the following values in the Property Editor for the iViews in the property category Application Parameters:
§         For the iView aaa.bbb.ccc: I_CONTEXT_ID=1111
§         For the iView xxx.yyy.zzz: I_CONTEXT_ID=2222

Modification of ABAP Web DynPro iViews delivered via Business Packages

Hello Everyone,
If this has been answered before, I apologize.
Is there any 'supported' way ( or 'unsupported' ) to modify the out of the box ABAP WebDynPro iViews which are delivered via some of the new Business Packages for ECC 6.0?
For example, I want to hide some fields on the 'Create Order' iView delivered in the Business Package for Internal Sale Representative..
Thanks

These Business Packages are just iView definitions that point to normal Web Dynpro ABAP components/applications that reside on the backend ABAP system. They can be enhnaced like any other WDA application.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6b/edc21e5e1e4a33a492b8955afffac7/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b170d256293c5ce10000000a421937/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/f4b9422e0fb911e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/frameset.htm

Unable to open Document from Asset Business Package

Hi,
We have installed Asset Business Package in portal. Almost everything is working fine. But when we try to open a document (PDF ) attached to an asset by clicking the document link in the page, a new browser window opens with a text inside. The PDF does not appear.
The text is actually a URL. If we copy this and paste in any browser window, it opens the actual document.
e.g. when we click the document link, the browser opens with the following text written inside it -
http://<DMS Server>:<Port>/contentserver/contentserver.dll?get;pVersion=0046&contRep=ZKPRO&docId=DD259BBB070E4BF182370017085D4BF5&compId=2008_SAP_Multi-resource-planning.pdf;accessMode=r&authId=CN%3DDCWW,OU%3DDCWW,O%3DmySAP.comWorkplace,C%3DDE&expiration=20080519170225&secKey=MIIBLwYJKoZIhvcNAQcCoIIBIDCCARwCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB%2FDCB%2BQIBATBOMEkxCzAJBgNVBAYTAkRFMRwwGgYDVQQKExNteVNBUC5jb20gV29ya3BsYWNlMQ0wCwYDVQQLEwREQ1dXMQ0wCwYDVQQDEwREQ1dXAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wODA1MTkxNTAyMjVaMCMGCSqGSIb3DQEJBDEWBBT3kV9haN8uzlLYKfDyN1KaVmD3MzAJBgcqhkjOOAQDBC8wLQIVAM0lkZG0ywkl%2FlTwWF0ubVul%2FXp3AhQBqnvX1EMBFZiK5U9TA%2FD5mWJdXQ%3D%3D
But if we copy this text and open it in another browser, the actual document opens up.
Can you please help me in this issue? How the document will open up automatically without showing the document URL.
Thanks and Regards,
Sudip

Hi,
We have installed Asset Business Package in portal. Almost everything is working fine. But when we try to open a document (PDF ) attached to an asset by clicking the document link in the page, a new browser window opens with a text inside. The PDF does not appear.
The text is actually a URL. If we copy this and paste in any browser window, it opens the actual document.
e.g. when we click the document link, the browser opens with the following text written inside it -
http://<DMS Server>:<Port>/contentserver/contentserver.dll?get;pVersion=0046&contRep=ZKPRO&docId=DD259BBB070E4BF182370017085D4BF5&compId=2008_SAP_Multi-resource-planning.pdf;accessMode=r&authId=CN%3DDCWW,OU%3DDCWW,O%3DmySAP.comWorkplace,C%3DDE&expiration=20080519170225&secKey=MIIBLwYJKoZIhvcNAQcCoIIBIDCCARwCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGB%2FDCB%2BQIBATBOMEkxCzAJBgNVBAYTAkRFMRwwGgYDVQQKExNteVNBUC5jb20gV29ya3BsYWNlMQ0wCwYDVQQLEwREQ1dXMQ0wCwYDVQQDEwREQ1dXAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wODA1MTkxNTAyMjVaMCMGCSqGSIb3DQEJBDEWBBT3kV9haN8uzlLYKfDyN1KaVmD3MzAJBgcqhkjOOAQDBC8wLQIVAM0lkZG0ywkl%2FlTwWF0ubVul%2FXp3AhQBqnvX1EMBFZiK5U9TA%2FD5mWJdXQ%3D%3D
But if we copy this text and open it in another browser, the actual document opens up.
Can you please help me in this issue? How the document will open up automatically without showing the document URL.
Thanks and Regards,
Sudip

I could not able to see Imported Business Package

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Michael
For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
After doing this i transported my BP

I'm trying to download office 365 small business package, and every time I try the website it says there is a runtime service error in the '/' application. Is this my mac or is it the website, and how can I fix it?

I'm trying to download office 365 small business package, and every time I try the website it says there is a runtime service error in the '/' application. Is this my mac or is it the website, and how can I fix it?

If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot

Change iviews installed from a business package

Hi experts,
I'm working on EP 2004s and I would like to know if there is a way to change iviews installed in the portal from a business package using Visual Composer. Can I copy them into my own created package in VC?
Thanks
Panos

Hi,
Usually Business Package iviews - especially the older ones - aren't based on Visual composer models but rather older IView technology. Therefore, it should be impossible to change them in VC.
I've heard that SAP may be considering releasing business packages (XSS?) as VC models but never heard any confirmation regrading this. Probbaly based on the support-related questions. I once blogged on this <a href="/people/community.user/blog/2007/01/30/enterprise-soa-explorations-fragments.
Dick

Error in viewing role contents after Business package import

Hi All,
We have implemented Business Package for Course Administrator and got the role 'Training Administration' in our portal.
When we navigate to the role, we get an error -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:48_06/02/09_0061_53421850
Refer to the log file for details about this exception.
The log file has following entry for this exception ID:
06:48_06/02/09_0062_53421850
[EXCEPTION|https://forums.sdn.sap.com/]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in
SAP Application Integrator occured: Unable to parse template [IF_true PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&<Authentication> &<DynamicParameter[PARAMETER_MAPPING PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&<ForwardParameters[QUERYSTRING|https://forums.sdn.sap.com/]>&<
ApplicationParameter[PROCESS_RECURSIVE|https://forums.sdn.sap.com/]>&\#39;;
the problem occured at position 310. Cannot process expression <System.client>
because Invalid System Attribute: System:&\#39;SAP_LocalSystem&\#39;,
Attribute: &\#39;client&\#39;
Also, we are not able to preview the iView.
I have checked related SAP Note - 890314 - EP on NW 2004s - Central Note for EP-PIN-AI and I see the entries for these errors. However the note mentions that it has been fixed in higher 04S SPs and we are anyway using NW 701 SP3, which is a higher release.
Could anyone give any clue on what configuration in case if we are missing?
Regards,
Anagha

Hi
For this Role, Check the iViews it Has.
In those iViews , Check the System Property.
Make sure the System Mentioned there points to valid Server.
Regards
Rajenrda

Buyer Business Package

Similar Messages

Maybe you are looking for