BW 3.x : Increase Background processes for one loading
Hello,
in BW 3.x, I must load cube1 into cube2 (cube2 is a cube1's copy). => During loading, time process is due to writing fact table.
I decrease parameter (infopackage parameter), in order to increase performance :
Maximum size of a data packet in kByte
I want to increase parallel processes in order to increase performance again (Data volume is so important). But How to increase this parameter : "Maximum number of dialog processes for sending data".
Thanks in advance for your help.
Best Regards,
See note 631710.
Or you can increase it at system source level (transaction SBIW/Main settings).
Regards,
Fred
Edited by: FCI on Apr 28, 2009 6:02 PM
Similar Messages
-
When will Apple allow background processes for the iPhone?
Can't find a suitable subforum so I'll post it here, please refer me to the correct Apple forum otherwise.
When will Apple allow background processes for the iPhone?
When will Apple allow Alerts from 3rd party apps?
Even my first Palm Pilot allowed developers to use Alert beeps.
Why is Apple crippling the iPhone?
If they continue this, Android will be the winner.
Or will the next SDK allow this?Background processing, simply won't. They already said they won't and explained why.
However, they are currently adding "Push" ability to developers (soon). Originally they did say they were shooting for Sept (but obviously that has passed). Nobody can say "why" it is late or when it will come. Just know it is coming.
Push in case you don't know will let a service (one service) run in the background that apple makes for the phone. that service will ping apple's servers. Apps that want to "run" in the background have to register with that service thus lets say AIM is on your phone, you send a message and close...somebody responds. AIM's servers will send notification to the push service...then the phone will alert you of a notification in the AIM app, you open (thus starts the app again) and it gets the message. -
Parallel processing for one large message
I have some troubles from messaging performance perspective.
Sender:ABAP Proxy
Receiver:File Adapter
I'd like use parallel processing for one large message.
And the file for receiver is needed to be one file.
Could you let me know how to set them ?
Best regards,
Koji NagaiHi
Can you elaborate your requirement more?
How are you trying to achieve parallel processing in XI.
Since you mentioned that the source is Proxy, there should be some trigger mechanism say selection screen, you restrict the values here and use append strategy in File and can execute the same.
REgards
Krish -
Increase the number of background work processes for data load performance
Hi all,
There are 10 available background work processes in the BW system. We're doing some mass load to multiple ODS.But system uses only 3 background processes. How can i
increase the number of used background work processes for new data load.
I tried to change number of prosesses with RSODSO_SETTINGS. But no successes. Are there any other settings need to change?
thanks,
YigitHi sankar,
I entered the max proc. number into ROIDOCPRMS. But it doesn't make difference. System still uses only 3 of background processes. RSCUSTA2 is replaced with
RSODSO_SETTINGS in BI 7.0 and this trans. can only change the processes for data activation, SID generation and rollback. I need to change the process numbers for data extraction. -
ATP Re-Run in background processing for sales order
Hello All,
In sales order i need to re run the ATP check for the quantity confirmation in background processing.
Scenario is :
I have created orders with order quantity 100.
while creating the order stock for the same material was only 20 so ultimately it will not confirmed the quantity.
After the some period i m increasing stock of same material by 120. Now, same order which i created before can be confirmed as i need only 100 quantity in that. but for the same I need to manually run the ATP again and then it will confirm the quantity.
instead of manually re run the ATP again i want to do this activity in background processing so that it will automatically confirmed the stock once inventory increased.
Is there any provision in sap to avoid this manual task with the help of background processing or any program?
Thanks and Regards,
RasikHi,
This can be achieved by rescheduling the orders .
<< Moderator message - Cut and paste response from http://help.sap.com/saphelp_470/helpdata/en/93/744c0c546011d1a7020000e829fd11/content.htm removed and points unassigned. Plagiarism is not allowed in SCN >>
You reach the Sales screen.
Select Environment ® Backorders ® Rescheduling ® Execute.
You can also simulate the backorders for rescheduling before confirming by selecting the simulateevaluate option.
Prerequisite for rescheduling the line items of the order is that at schedule line you should not flag the field fixed date and quantity field. Also for ATP you must have defined the scope of check with checking rule BO(i guess) for that particular plant in combination of checking group .
Hope this will help you.
Thanks and Regards,
Atulkumar Dagade
Edited by: Rob Burbank on Jan 24, 2012 10:16 AM -
Background processing for a task
Hi all,
my problem is this: I enter in a step of a wf structure and for that step I must set the task in background--->double click on task and I thought that, in modify mode, the flag 'background processing' in label 'Execution' of the task was editable and instead no...How can I set my task/step in background?
Thanks in advance
ByeHi,
Follow the below steps
1. Execute PFTC transaction.
2. Choose the task type as Standard Task.
3. Enter the task ID without Object type TS i.e. if task ID is TS90000000, then simply enter 90000000.
4. Open in change mode and enable the check box BACk ground Processing.
After the above steps are completed, Execute the transaction SWU_OBUF and click SHIFT + F1. to refresh teh buffer.
Regards
Pavan
Edited by: Pavan Bhamidipati on Nov 21, 2011 4:24 PM -
Background process for recovering database.
Dear Guru's,
Not sure whether this is the correct forum to post this thread.
Can anyone let me know, what is the background process that does the recovery of database (Instance recovery is done by SMON automatically).
I mean, when we go for PITR or refresh, we'll apply archive files to the backups. Which background process reads the archive files to the buffer cache, so that they are applied to the database.
Regards,
Kumar865747 wrote:
Dear Guru's,
Not sure whether this is the correct forum to post this thread.
Can anyone let me know, what is the background process that does the recovery of database (Instance recovery is done by SMON automatically).
I mean, when we go for PITR or refresh, we'll apply archive files to the backups. Which background process reads the archive files to the buffer cache, so that they are applied to the database.
why does answer matter since you have no control over it to begin with? -
2 Automated Row Processes for one page?
Hey people, me again ...
i have created 2 Regions on my Page. Each region has databasefields which references: RegionA -> a view, RegionB --> a table with the same ID (customer) ID)
For each region i have an ARF, which was generated by the wizard.
When i had just one Region the rowfetch worked fine. Now that i have the second Region i get a failure: "Row cannot be fetched" (debug shows that this happen in my second ARF).
I tried to change the process point from AFTER Header to everything what i can choose ... same failure.
If i change the sequence
ARF_A from 10 to 20 and
ARF_B from 21 to 10 then everything in my SECOND Region is shown.
Same happens when i set "Set Memory Cache on display" for the second ARF.
Isn't it possible to habe 2 ARFs for one page?
Or where is my failure?
Thank you for your help.
JanaHey,
first of all, thank you for your response.
In my first region there is a view over 3 tables. Works fine. I don't want to put more tables in this view because it is very big already.
So i want to have another region with just a single table.
Is there no way to have two ARF - processes on same page? -
Hello friends,
I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line status it changes to "closed" instead of "awaiting shipping".
Plz guide me if i have missed something in the setups.
thanks,
SachinHi Sachin,
pls check the below notes from MOS
Drop Ship Sales Order Cycle In Order Management (Doc ID 749139.1)
Vision Demo - How To Create A Drop Ship Sales Order/Purchase Order (Doc ID 1060343.1)
Thanks
-Arif. -
Background processing for ABAP report with selection screen
Hi ABAP Gurus,
I m facing a strange problem in scheduling a background job for my report with a selection screen. I have a variant for the report.
I scheduled a job, but it seems to be not doing anything though all the system resources are available. The job overview shows "Acive" for the job. The job is neither stopping anything, it is just sitting there In SM50, the status shows "On Hold".
Any ideas/comments on the problem and how this can be overcome?
Qucik replies and solutions will be highly appreciated as this is a crucial part for a go-live project.
Thanks in advance.
Shivani.Yes. My report has a selection-screen which requires user input. But I have created a variant for the report and trying to run it in background using this variant. But facing this problem.
Strange thing is, instead of the usual SM36/SM37 option where we schedule and monitor background jobs, this option does not work for my report.
But I tried through SE38, and from my selection screen I selected "Schedule background job" and "run immediately" option, and this works. Though I still use SM37 to monitor this background job.
I have never faced such a situation before.
Any hints/tips why this happens and how this can be overcome in the future?
Thanks in advance.
Shivani. -
JTextfield background color for one line
Hi everybody,
How can I change the backgroundcolor for one single line in a textfield? I think it's nog possible in an ordinary JTextfield, does anybody know how I can do this?
Best regards,
JethroLook at Highlighter
-
Post Author: thecoffeemachine
CA Forum: .NET
I already posted this message in other Web sites, but I am almost getting crazy here and I need help:
HI:
The Web application I am testing was having several issues related to loading Crystal Reports. It was fixed and I do not know which of the 1000 things I did to fix it; but now it began, again, to have the same behavior after I had a conflict with another Web site that was in the same server.
The thing is that I had another virtual directory where resided a copy of the same Web app. for testing purposes/working with the Visual Studio. The reports were loading all fine, very fast, all perfect... And suddenly the assemblies of one Web site and the other began to "blend" together and..... well the same behaviors appeared again. I tried to copy the last stable backup and rebuild the Web app... but it did not work.
At the very first time that one requests the report, it shows without problem. At the second time it shows an error message related to "cannot submit to background processing", and sometimes "object not set to an instance.." ... and on the third time it just never shows up and the app. becomes unresponsive. I have to close the window and request the Web site again in another browser window. If I wish to see the report again I have to wait for hours until it shows it.
I am using Visual Studio 2003 and the Crystal Report version that was shipped with that Visual Studio version. I am working with Windows Server 2003 and SQL Server 2000. Below is the VB code:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Me.SqlConnection1.Open()
Me.SqlSelectCommand1.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandReferences.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandTextbook.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandObjectives.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandTopicData.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandCourseOutcomes.Parameters("@CourseCode").Value = Request.QueryString("CD")
Me.SqlDataAdapterMainData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseSyllabusData") Me.SqlDataAdapterReferences.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseReferenceData") Me.SqlDataAdapterTextBook.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTextbookData") Me.SqlDataAdapterObjectives.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseObjectivesData") Me.SqlDataAdapterTopicData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTopicData")
Me.SqlDataAdapterCourseOutcomes.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseOutcomes")
Dim myExportOptions As CrystalDecisions.Shared.ExportOptions Dim myDiskFileOptions As CrystalDecisions.Shared.DiskFileDestinationOptions Dim myExportFile As String Dim myReport As New ABETFormat myReport.SetDataSource(Me.DtsSyllabusCompleteData1)
myExportFile = "C:UNTempPDF" & Session.SessionID.ToString & ".pdf" myDiskFileOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions myDiskFileOptions.DiskFileName = myExportFile myExportOptions = myReport.ExportOptions
With myExportOptions .DestinationOptions = myDiskFileOptions .ExportDestinationType = .ExportDestinationType.DiskFile .ExportFormatType = .ExportFormatType.PortableDocFormat End With
myReport.Export()
Response.ClearContent() Response.ClearHeaders() Response.ContentType = "application/pdf"
Response.WriteFile(myExportFile) Response.Flush() Response.Close() System.IO.File.Delete(myExportFile) Me.SqlConnection1.Close()
End Sub
I already have tried moving the Crystal Reports dll´s to the bin directory. ..... I have tried calling the Garbage Collector at page unload...I also have checked, inside the report, that the database is "up to date"... ... recycling the worker process of the IIS... etc...
I see that, in debbuging mode inside the Visual Studio, when the page loads the debbuging window shows a message notifying that the symbols related to the Crystal Reports dll's could not be loaded.
Should I need to modify the default properties of the database? I checked "database is case insensitive", "use indexes or server for speed".. I have tried checking and unchecking the box "performing grouping on server"
Oh by the way, my report has about 4 subreports in it. Each report loaded shows 1 or 2 pages.
ANY HELP WILL BE EXTREMELY APPRECIATED....
MMSSee [Crystal Reports For Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true] article, page 107 and on for details on how to use Crystal reports in session.
Ludek -
Parallel Processing for BI Load
Hi All,
I have a datasource which i migrated from BW 3.x to BI 7 .
I am loading the data from datasource to ODS .
In the DTP -> Execute tab i can see only 'Serial Extraction
and processing of source package' . I Think because of this
i am not able to do parallel processing . I mean when i try to load data from PSA to ODS by DTP , the data is loading package by package ( It is not triggering parallel jobs while loading) .
Could you please advice me why i am not able to see
' Serial Extraction , Immediate parallel processing' in my
Execute tab of DTP .
Is there anything i need to configure at Datasource Level .
Please help me .
Regards
Santosh
Edited by: santosh on Jun 3, 2008 2:37 AMHi, check your extraction tab on the Datasource. I am pretty sure this has something to do with it. This is what it is on the help for DTP Processing.
Processing Mode
The processing mode describes the order in which processing steps such
as extraction, transformation and transfer to target are processed at
runtime of a DTP request. The processing mode also determines when
parallel processes are to be separated.
The processing mode of a request is based on whether the request is
processed asynchronously, synchronously or in real-time mode, and on the
type of the source object:
o Serial extraction, immediate parallel processing (asynchronous
processing)
A request is processed asynchronously in a background process when a
DTP is started in a process chain or a request for real-time data
acquisition is updated. The processing mode is based on the source
type. -
Crystal Reports background processing for SAP Business One 8.8
Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.
at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob -
Background process for CJ30 and CJ32
Hello Experts,
I would like to do the transaction CJ30 and CJ32 in background. Is there any Business object , BAPI or functional module to do this job.
I would keep recording as last option. Please provide any information you might have for automating this process in background. Any insight would be really helpful.
FATMANThanks Sreenivas,
Functional Module KBPP_EXTERN_UPDATE_CO is working for my project.
FATMAN
Maybe you are looking for
-
Can I share one iPhoto library with all the users in my iMac?
I moved the library to the shared folder and gave it 775 permissions but when I try opening it with the second users it asks if I want to fix permissions. I click OK and after a while it tells me it is locked... which kind of tells me I won't be able
-
Everytime I try to sync my iPod Touch with updated music from my iTunes library, I get the following error message: The iPod could not be synched because the sync session failed to start. Please help!
-
my macknook pro is incredibly behind in updates. however when selecting software update it says there are no updates. i can't do much with it due to nothing running on the software i have currently.
-
How do I upgrade Camera RAW?
I have recently purchaced a canon 7d and now I can not open my RAW images in CS4 .. HELP they are saving as a .CR 2 file if that matter
-
I have an ipod touch 4th gen. Can anybody help with ghost files?
Here is my problem: I added an equalizer program called "Louder Logic", It worked great until I needed to delete most of my Loaded CD's, to create space. I made the mistake of deleting the Louder Logic CD file first, which created these Ghost Fil