Background processing for a task

Hi all,
my problem is this: I enter in a step of a wf structure and for that step I must set the task in background--->double click on task and I thought that, in modify mode, the flag 'background processing' in label 'Execution' of the task was editable and instead no...How can I set my task/step in background?
Thanks in advance
Bye

Hi,
Follow the below steps
1. Execute PFTC transaction.
2. Choose the task type as Standard Task.
3. Enter the task ID without Object type TS i.e. if task ID is TS90000000, then simply enter 90000000.
4. Open in change mode and enable the check box BACk ground Processing.
After the above steps are completed, Execute the transaction SWU_OBUF and click SHIFT + F1. to refresh teh buffer.
Regards
Pavan
Edited by: Pavan Bhamidipati on Nov 21, 2011 4:24 PM

Similar Messages

When will Apple allow background processes for the iPhone?

Can't find a suitable subforum so I'll post it here, please refer me to the correct Apple forum otherwise.
When will Apple allow background processes for the iPhone?
When will Apple allow Alerts from 3rd party apps?
Even my first Palm Pilot allowed developers to use Alert beeps.
Why is Apple crippling the iPhone?
If they continue this, Android will be the winner.
Or will the next SDK allow this?

Background processing, simply won't. They already said they won't and explained why.
However, they are currently adding "Push" ability to developers (soon). Originally they did say they were shooting for Sept (but obviously that has passed). Nobody can say "why" it is late or when it will come. Just know it is coming.
Push in case you don't know will let a service (one service) run in the background that apple makes for the phone. that service will ping apple's servers. Apps that want to "run" in the background have to register with that service thus lets say AIM is on your phone, you send a message and close...somebody responds. AIM's servers will send notification to the push service...then the phone will alert you of a notification in the AIM app, you open (thus starts the app again) and it gets the message.

ATP Re-Run in background processing for sales order

Hello All,
In sales order i need to re run the ATP check for the quantity confirmation in background processing.
Scenario is :
I have created orders with order quantity 100.
while creating the order stock for the same material was only 20 so ultimately it will not confirmed the quantity.
After the some period i m increasing stock of same material by 120. Now, same order which i created before can be confirmed as i need only 100 quantity in that. but for the same I need to manually run the ATP again and then it will confirm the quantity.
instead of manually re run the ATP again i want to do this activity in background processing so that it will automatically confirmed the stock once inventory increased.
Is there any provision in sap to avoid this manual task with the help of background processing or any program?
Thanks and Regards,
Rasik

Hi,
This can be achieved by rescheduling the orders .
<< Moderator message - Cut and paste response from http://help.sap.com/saphelp_470/helpdata/en/93/744c0c546011d1a7020000e829fd11/content.htm removed and points unassigned. Plagiarism is not allowed in SCN >>
You reach the Sales screen.
Select Environment ® Backorders ® Rescheduling ® Execute.
You can also simulate the backorders for rescheduling before confirming by selecting the simulateevaluate option.
Prerequisite for rescheduling the line items of the order is that at schedule line you should not flag the field fixed date and quantity field. Also for ATP you must have defined the scope of check with checking rule BO(i guess) for that particular plant in combination of checking group .
Hope this will help you.
Thanks and Regards,
Atulkumar Dagade
Edited by: Rob Burbank on Jan 24, 2012 10:16 AM

Background process for recovering database.

Dear Guru's,
Not sure whether this is the correct forum to post this thread.
Can anyone let me know, what is the background process that does the recovery of database (Instance recovery is done by SMON automatically).
I mean, when we go for PITR or refresh, we'll apply archive files to the backups. Which background process reads the archive files to the buffer cache, so that they are applied to the database.
Regards,
Kumar

865747 wrote:
Dear Guru's,
Not sure whether this is the correct forum to post this thread.
Can anyone let me know, what is the background process that does the recovery of database (Instance recovery is done by SMON automatically).
I mean, when we go for PITR or refresh, we'll apply archive files to the backups. Which background process reads the archive files to the buffer cache, so that they are applied to the database.
why does answer matter since you have no control over it to begin with?

When running the workflow background process for drop shipment order, sale order line's status gets automtically closed instead of awaiting shipping

Hello friends,
I am created a drop shipment order with all the setups done . now i have booked the sale order as source type external. but when i run the workflow background process , after completing the report when i check the sale order line status it changes to "closed" instead of "awaiting shipping".
Plz guide me if i have missed something in the setups.
thanks,
Sachin

Hi Sachin,
pls check the below notes from MOS
Drop Ship Sales Order Cycle In Order Management (Doc ID 749139.1)
Vision Demo - How To Create A Drop Ship Sales Order/Purchase Order (Doc ID 1060343.1)
Thanks
-Arif.

Background processing for ABAP report with selection screen

Hi ABAP Gurus,
I m facing a strange problem in scheduling a background job for my report with a selection screen. I have a variant for the report.
I scheduled a job, but it seems to be not doing anything though all the system resources are available. The job overview shows "Acive" for the job. The job is neither stopping anything, it is just sitting there In SM50, the status shows "On Hold".
Any ideas/comments on the problem and how this can be overcome?
Qucik replies and solutions will be highly appreciated as this is a crucial part for a go-live project.
Thanks in advance.
Shivani.

Yes. My report has a selection-screen which requires user input. But I have created a variant for the report and trying to run it in background using this variant. But facing this problem.
Strange thing is, instead of the usual SM36/SM37 option where we schedule and monitor background jobs, this option does not work for my report.
But I tried through SE38, and from my selection screen I selected "Schedule background job" and "run immediately" option, and this works. Though I still use SM37 to monitor this background job.
I have never faced such a situation before.
Any hints/tips why this happens and how this can be overcome in the future?
Thanks in advance.
Shivani.

BW 3.x : Increase Background processes for one loading

Hello,
in BW 3.x, I must load cube1 into cube2 (cube2 is a cube1's copy). => During loading, time process is due to writing fact table.
I decrease parameter (infopackage parameter), in order to increase performance :
Maximum size of a data packet in kByte
I want to increase parallel processes in order to increase performance again (Data volume is so important). But How to increase this parameter : "Maximum number of dialog processes for sending data".
Thanks in advance for your help.
Best Regards,

See note 631710.
Or you can increase it at system source level (transaction SBIW/Main settings).
Regards,
Fred
Edited by: FCI on Apr 28, 2009 6:02 PM

Crystal Reports background processing for SAP Business One 8.8

Dear Partners,
I have an SDK program developed in SAP Business One SDK that works in 2007, it calls crystal reports externally and can be executed as a background task using the windows schedular or from the command prompt.
My problem is it does not work under SAP Business One SDK 2008 PL18 with SQL Server 2008, Visual Studio 2008.
I receive the following message after this line in my code,"oReport.PrintToPrinter(CopyNo, False, 0, 0)".
'CrystalDecisions.CrystalReports.Engine.LogOnException: Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters. ---> System.Runtime.InteropServices.COMException (0x8004100F): Logon failed.
Error in File XX_Report_Ver_0.01 {1A6620A2-5D73-49D2-9347-32ED068AA64E}.rpt:
Unable to connect: incorrect log on parameters.
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.
   at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
   at BGProductionRpt.ECR_Common.ECR_PrintReport(Int32 CopyNo) in C:\SDK Development\8.8\test\XX_Rpt\ECR_Common.vb:line 485'
My Question is what Crystal Reports libraries or other method should I be using ?
Crystal Reports 2008 for SAP Business One eg. 51038978.zip - downloaded from portal obviously dosn't contain the CrystalDecisions libraries.
Crystall Reports 2008 - cr2008_sp3_fullbuild, cr2008fp33.exe, cr2008fp33_mm, cr2008fp33_clickonce - also download from the portal, the cr2008_sp3_fullbuild does contain the crystal decisions libraries.
Finally other choices are crystal reports included with the visual studio 2008 and crystal reports full version direct from Business Objects.
I have tried different versions of crystal decision libraries- eg, 12.0110 or 12.02 but still no joy.
Also if I manage to get the report to fire what should the client be running eg, if they have the Crystal Reports 2008 for Business One do they also need to install the Crystal Reports Run time - cr2008fp33_clickonce.
Any help would be appreciated.
Thanks.

Hi John
Since the SDK works in 2007 it will be using the OLD DB access method.
Change the Crystal report to use an OLE DB datasource rather than the SAP Business One data source.
Regards
Rob

Background process for CJ30 and CJ32

Hello Experts,
I would like to do the transaction CJ30 and CJ32 in background. Is there any Business object , BAPI or functional module to do this job.
I would keep recording as last option. Please provide any information you might have for automating this process in background. Any insight would be really helpful.
FATMAN

Thanks Sreenivas,
Functional Module KBPP_EXTERN_UPDATE_CO is working for my project.
FATMAN

Background Process for keystrokes?

Hello, I would like to have my application do something when someone presses the "T" key. This in itself, isnt hard. However, I would like it to happen even if my program doesnt have focus. A keylogger would be an example of something like this. I want it to play a .wav file when I hit the T key. Any ideas? I cant seem to find a way to get the keypress if Im not focused on my application.
Im using awt/swing, but anything that works is fine.

Yup, you're right, current-Java doesn't support grabbing key events.
To get them into Java, you'd have to write some native code, bind it to Java using JNI, etc.
- David

Background Processing & Update Task

Are "background processing" and "update task" processing the same? I have a function which is timing out and I need to have it run in the background. If I used the CALL FUNCTION <name> IN UPDATE TASK, would that provide the same resource level and time allowance as having the logic run via a SUBMIT?

Hi,
This is the F1 documentation for calling a FM in Update task
Flags the function module func for execution in the update task. It is not executed at once, but the data passed with EXPORTING or TABLES is placed in a database table and a subsequent COMMIT WORK then causes the function module to be executed by the update task.
This is the F1 documentation for calling a FM in background task
Flags the function module func to be run asynchronously. That is, it is not executed at once. Instead, the data passed using EXPORTING or TABLES is placed in a database table and the next COMMIT WORK executes it in another work process.
Hope this helps
Regards,
San

How to make a .EXE file run always as a BACKGROUND PROCESS ???

I have a .EXE file that i want to run always on STARTUP.
And it should run only in the BACKGROUND PROCESS LIST in TASK MANAGER.
It should not show up on the TASKBAR or NOTIFICATION TRAY.
Plz Help !!!! Thnx in advance

What is the need for such a security?
If you are an administrator and you want to run the EXE file in background in all other user accounts (which are non-admins), you can simply add the file path under the run key in registry. The registry entry is HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
The EXE file is not visible to non-admin users (of course, visible to administrators), even in Task Manager.
Depending on the application behaviour and the way it works, it may or may not be visible in system tray or task bar.
Balaji Kundalam
some where i read to add the path in inverted commas followed by -auto
Eg : "C:\Users\GAURAV\Documents\****.exe" -auto
i added it and it ran on startup but it showed on my desktop !!! i dnt want it to show on desktop !

ABAP Custom Report (ALV Format) in Background Processing

Hi
I am not the hardcore ABAP Person. But want to know about the detail fact of the ABAP Custome Reports. The question is can we do the background processing for the ABAP Custome Report in ALV Format.
If Yes ..do we require to have any additional Function/code to get the spool in ALV Format. I saw the comments that the output will look like the mess.
Please share your comment or any useful documenation on this. We are in ECC 6.0
Thanks in advance..and yes it will be rewared by points.
Navin

You can use alv's in background using docking containers, but the display wont be interactive. If you search the forum you will see tons of threads which talk about running ALV's in background.
For the output to be interactive, you can run the report in foreground and do the data processing in background.
Refer this link:
Displaying ALV Grid in Background Job

Mass processing for printing shopfloor papers

When I press background processing for printing shopfloor papers in COHV then I get message background processing triggered but no print comes out of printer.
Where to see result of background processing. In COHV log is also empty.
My requirement is that when I press print Icon in COHV then it should automatically print paper, No need to goto Sp01 and print from there .
Please guide.

Mayuresh,
In the order print control configuration transaction OPK8, activate Print Immediately check box against the individual list in the "Spool Parameters for user" folder.
Since you have mentioned that you are using Background processing for printing, you need to run Program "PPPRBTCH" in background to print the papers.
Regards,
Prasobh
Edited by: Prasobh Karunakaran on May 7, 2009 8:03 PM. Added background processing program details as user is using background processing mode instead of online

Photoshop CS6 still running in Background Processes, won't close

Lately, I've been having a problem with Photoshop CS6 where, even after I close the program, Photoshop.exe is still running under Background Processes in the task manager. Hitting "end task" on the program doesn't do anything. It takes up quite a big portion of my processing power, and it usually closes on its own if I just wait a good 5-10 minutes. Even weirder, while this "Ghost Photoshop" is running in the background, I can launch a new version of Photoshop, that will run at the same time without any trouble (aside from the expected slowness when a chunk of my processing power is being eaten up by whatever Ghost Photoshop is doing). I'm running Photoshop CS6 on Windows 8, with just one extension installed-- Coolorus 2.0.

They were using the little red "x", file > quit allowed her to reopen the program etc. I find it weird that it wont close with the "x" but if I right click the icon on the task bar, it wont allow me to reopen or do anything with it so I was under the assumption it was stuck open.

Background processing for a task

Similar Messages

Maybe you are looking for