BW AL11 error

Hi All,
I am getting the following error
Message with maximum length and maximum variable parts: /u02/data/G_9999_BW/GDR/in/ 1234*
when I try uploadig file to .csv file to al11.
Have anyone have this issue before if so what is this error message means
Regards J

Try checking the error message in SE91 with message ID and number.

Similar Messages

How to generate a empty file in AL11 using ABAP and unix command

Hi Experts,
when load infopackage triggers it will search file from AL11 if file is available it will get loaded successfully. When there is no file in AL11 error while opening file (orgin A) and the load will fail. At this level i have to write a abap code using unix command to generate a empty file.
Is there any way to achieve the above requirement.
Thanks
Vara

Hi,
If i get your requirement properly then you want to create a blank file if there is no file on the application server so that your infopackage does not fail, am i correct.
If this is your requirement then this can be easily done if you use process chain to load the file via infopackage. Follow the following steps:
1. Add a ABAP program before the infopackage and check if the file is present on the server or not. Use a simple ABAP statement OPEN DATASET <FNAME>. Check the SY-SUBRC after this statement if it is not 0 then it means that the file does not exist on the application server.
2. Once you have established that the file is not present create a flat file using a code similar to the below one
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE
MESSAGE D_MSG_TEXT.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', D_MSG_TEXT.
EXIT.
ENDIF.
* Transferring Data
LOOP AT INT_table.
TRANSFER INT_table-field1 TO FILENAME.
ENDLOOP.
* Closing the File
CLOSE DATASET FILENAME.
3. Add your infopackage step after this ABAP program in your process chain.
I hope this helps.
Best Regards,
Kush Kashyap

How to resolve the error "File could not open" in AL11?

Hi Friends,
When I am going to write a file via DATASET.
But it's showing me a error"File Could not Found"?
And I am unable to check my fiel at AL11.
Please suggest me the solutions.
Regards
Ricky

Hi,
Try this code
TYPES : BEGIN OF ty_emp,
empno(2) TYPE c,
empid(10) TYPE c,
empname(3) TYPE c,
END OF ty_emp.
DATA : it_emp TYPE TABLE OF ty_emp,
wa_emp TYPE ty_emp.
DATA : pbk TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file TYPE rlgrap-filename default 'D:\EMP.TXT'.
PARAMETERS : p_asfile TYPE rlgrap-filename default 'EMP'.
SELECTION-SCREEN END OF BLOCK b1.
pbk = p_file.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = pbk
FILETYPE = 'ASC'
has_field_separator = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
 TABLES
 data_tab = it_emp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET p_asfile FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
 EXIT.
ENDIF.
LOOP AT it_emp INTO wa_emp.
 TRANSFER wa_emp TO p_asfile.
ENDLOOP.
CLOSE DATASET p_asfile.
==============================================
Regards,
Krrishna

HTML file Error while Processing in Application server AL11

Hi Experts,
I have SAP workload data in HTML file and IF i download it using GUI_DOWNLOAD, I am successfully able to access the file.
But Further:
1) I am uploading the above mentioned downloaded file in binary mode.
2) Converting binary to xstring
3) Adding and saving to ZIP folder using class CL_ABAP_ZIP
4) Converting back ZIP file to Binary mode
5) Transferring it to sever path using dataset ( character by character)
But after transfer, I try to access file using T code AL11, there file is created by on opening, it shows HTML tag along with the data i.e formatting error.
How to handle this.
Thanks
Deep.

Hi,
Try downloading the file from application server using the transaction CG3Y, while saving the file, save as HTML file.
Still if you find the formatting error, then open the view -> source code of the HTML page, and adjust the space, line space, alignment etc if any, will resolve your issue.
Regards,
Santhosh.

Error file al11 with accent

Hello, I have a file with characters 'ñ, á, é,....'.
When I put this file in AL11, the content of file is modified and where exist one accent or 'ñ' is changed by # and this generate errors.
The problem is in the code page, but I don´t Know how resolved.
Any idea?

Hi Guys
Code page is the set of characters that would be allowed into your system,
Please take a detailed look at the note 173241.
The file contains unallowed chararcters, these are usually displayed
with ##### in BW.
RSKC is only relevant for updating master data keys. Here the problem
is, that these special characters are not contained in the codepage
specified for the file. Please check for the codepage of the file,
and enter it accordingly in the "character set" settings on the
extraction tab of the datasource, and activate the datasource. If the
preview succeeds, make also sure, that the same settings are entered
in the according tab in the infopackage.

SPAU error reading log file

Hi All,
We have an R/3 4.0B landscape and are working on some changes. I want to see if any SAP delivered objects have been modified in the past, but whenever I run SPAU or SPDD, I get an error message
"Error Reading File D:\usr\sap\put\log\umodstat.log" "Message Number 0U 503".
I can read a text file in the same directory through AL11, so I'm reasonably sure it's not an OS permission problem.
Any ideas?
Thanks,
Alan

Hi All,
I had same issue trying to edit sat.trc file, I fixed this problem by manual editing sat.trc file and modified the following line:
<!FORMATTER[com.sap.tc.logging.perf.PerfFormatter]/>
change to:
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
after changes you will able to open file with Visaul Admin Log Viewer or standalone logviewer.
Hope it helps.
Regards

Error while activating Process Chains

Hi all,
while activating the Process Chains, i am getting the following error "Job BI_PROCESS_PSAPROCESS could not be scheduled. Termination with returncode 8"
when i double click on the error msg, i got the following help msg: "
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_PSAPROCESS under user ALEREMOTE.
Can any one please show some way to solve this problem? please do this favor, i have been suffering with error for a long time.
Points will be given
Thanks
Ganesh

Hi,
Just analyze the error message that you get while activating the PC, don't give any server name.If you are trying to run process chain using Flat file, it won't work,
and you should have source system R/3 or you have own datasources in BW system itself at that toime you can use PC to extract data. If your source system is Flat ile, it won't work. other wise you should place your flat file in application server, using AL11 tcode.
OSS : 511475
Symptom
You cannot schedule or perform any batch jobs with the BW or source system background user.
The error RSPC 065 occurs in the process chains:"Job could not be scheduled, termination with return code 8"
Other terms
RSPC065
Reason and Prerequisites
The user type is
"CPIC" up to 4.6B
"Communication" as of 4.6C
This user type may not execute or start any batch jobs, irrespective of the user authorizations.
Solution
Set the type of background user to
"Background" up to 4.6B
"System" as of 4.6C
This user type corresponds to the "Communication" type and may also perform background functions.
Through the Customizing, the BW user is automatically created by mistake as a communication user.Depending on your BW system release, you can solve this problem as follows:
BW 2.0B
 Import Support Package 24 for 2.0B (BW2.0B patch24 or SAPKW20B24) into your BW system. The Support Package is available once note 456551 with the short text "SAPBWNews BW 2.0B Support Package 24", which describes this Support Package in more detail, has been released for customers.
BW 2.1C
 Import Support Package 16 for 2.1C (BW2.1C patch16 or SAPKW21C16) into your BW system. The Support Package is available once note 456566 with the short text "SAPBWNews BW 2.1C Support Package 16" has been released for customers.
BW 3.0A
 Import Support Package 8 for 3.0A (BW3.0A patch08 or SAPKW30A08) into your BW system. The Support Package is available once note 452632 with the short text "SAPBWNews BW 3.0A Support Package 08" has been released for customers.

Creation of xml file in r3 application server (AL11)

Hi All
I need to create xml file in r3 application server (AL11) using PI.Can we achieve this using file adapter or we need to proceed with proxy. As I tried with file adapter with FTP transport protocol. Its giving the error as "Unable to create new pooled resource:FTPEx:Login incorrect".
Thanks in advance
Regards,
Kartikeya

Hi
need to create xml file in r3 application server (AL11) using PI.Can we achieve this using file adapter or we need to proceed with proxy.
To generate file at AL11 file directory use File adapter. Proxy is not required for this
Its giving the error as "Unable to create new pooled resource:FTPEx:Login incorrect".
1. Check with the Login credentials for the FTP service.
2. FTP User you use in communication channel must have 777 access to FTP location.
Thanks
Gaurav

Error in sender file adapter: source directory does not exist

Hi,
The PI system is 7.11
I've created sender file adapter with following details:
Transport Protocol : File System
Source directory: /interfaces/In
I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should be processed.)
But still i get in Communication Channel Monitoring the following error:
"Configured Source directory "/interfaces/In" does not exist.
(i also tried to give the source directory as "interfaces/In" and as "//interfaces/In" but still the same error.
Any suggestions as to what is wrong?
kr
Robert

Actually, Need to use forward slash (/) to separate directory names in accordance with the Java specification.
But wanted to try if that works..
Also check directory name , path again as this is case sensitive...
--Divyesh

NFS Commnication channel errors for deleting and placing

Hi All,
I was trying File to file scenario.
I am picking the file from App server(AL11) using NFS Adapter and the processing Mode is Delete
In comm channel monitor it showing an error as
Sender channel error:
Error: File '/staging/INTERFACE/SAP/ca/kar370.txt' - deleting after processing failed
Same way while placing the file
Receiver channel error:
Error: Message processing failed: FileNotFoundException: /staging/INTERFACE/SAP/ca/test120110906-122051-980.txt (Permission denied)
Whether i dont have the permission to delete and place the file from and to the App server(AL11)?
What is the procedure in order to make it possible.
Thanks
Sai

Hi All,
Thanks to every one.
The problem is solved ,
Basis Guy has given the permissions, and i am able to place and delete the files .
Thanks
Sai

Error in data load from application server

Well, this problem again!
In datasource for dataload by flatfile, tab Extraction i selected Load Text-Type File From Application Server.
In tab Proposal:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9198
Data load sucefull.
I add 1 record:
Converter: Separated with Separator (for Example, CSV).
No. of Data Records: 9199
So appear a message error "Cannot convert character sets for one or more characters".
I look in line 9199 in file and not have any special character. I use AL11 and debug to see this line.
When i load file from local workstation, this error not occur.
What's happen?

Hi Rodrigo,
What type of logical file path have yopu created in the application server for loading this file.
Is it a UNIX file path or an ASCII file path.
Did you check how the file looks in the application server AL11?
Prathish

SAP Web Service error text : The database returned a value containing an error , type CX_SY_OPEN_SQL_DB

Hello Guru's,
we are creating sales order in SAP from a quote created in .NET, through Web Service created in SAP, and consumed in .NET.
When ever a order is created in SAP for a given quote, SAP returns the sales order number to .NET.
Orders are getting created as expected, but once in a while we are getting the following error from webservice :
Web service processing error; more details in the web service error log on provider side (UTC timestamp 20140609173429; Transaction ID 4DFCEFE33301F1EBB5CE00155D0B4530)
But the problem is order is getting created in SAP for the perticular quote for which we are getting the above error and this order number is not getting returned to .NET.
Upon analysis in TCODE SRT_UTIL for the above transaction ID, has the following details , which are hardly help full to resolve the error.
----TYPE CX_SY_OPEN_SQL_DB
----ERROR_TEXT The database returned a value containing an error
----CX_SY_NO_HANDLER
-----CLASSNAME CX_SY_OPEN_SQL_DB
This Exception raised by Web Service application
Could you please help in resolving this issue or alteast provide an approach for the same.
Thank you,
Suresh.

Thank you Bhaskar,
How can we clarify whether the error is from SAP or Web part.
I have checked ST22, but there is not entry for the perticular exception transaction ID
My exception time stamp is
-------------------START-------------6/9/2014 1:34:33 PM
Error :Web service processing error; more details in the web service error log on provider side (UTC timestamp 20140609173429; Transaction ID 4DFCEFE33301F1EBB5CE00155D0B4530)
-------------------END-------------6/9/2014 1:34:33 PM
In al11, i found the following for the perticular exception time stamp
**** Trace file opened at 20140609 133431 Eastern Daylight Time, by disp+work
**** Versions SAP-REL 720,0,500 RFC-VER U 3 1442251 MT-SL
XRFC> Begin of user trace
XRFC> ---------------------------------------------------------------------
XRFC> <
XRFC> TRACE SOAP RUNTIME - header <
XRFC> <
XRFC> ------------------------------------------------------------------ <
XRFC> REQ_SIZE : 2685 <
XRFC> RESP_SIZE : 0 <
XRFC> PARENT_ID : ROOT_CALL_ID <
XRFC> TRC_KEY : 40FCEFE3BD6EF184B5CE00155D0B4530 <
XRFC> REQ_BASED : <
XRFC> SESSION_ID : 0003925540FCEFE3BD6EF17DB5CE00155D0B4530 <
XRFC> TS_CALL : 20140609173408.2880000 <
XRFC> SY_UNAME : <
XRFC> HOSTNAME : <
XRFC> SY_SID : PRD <
XRFC> SY_MANDT : 300 <
XRFC> SYS_NR : 19 <
XRFC> APPLSERVER : <
XRFC> ISPRESCHED : X <
XRFC> DURATION : 21810 <
XRFC> NETHDRTIME : 21810 <
XRFC> CALL_STATE : 2 <
XRFC> ERRORTYPE : APPLFAIL <
XRFC> ERRORAREA : APPL <
XRFC> CTXDP_TYPE : SOAP_RUNTIME <
XRFC> SYNC_ASYNC : S <
XRFC> LOCATION : P <
XRFC> DIRECTION : I <
XRFC> REQ_ID : 91C57815916E421CA9F3D652FFACE9C7 <
XRFC> RESP_ID : 00155D0B45301EE3BBFF89A0267EB5CE <
XRFC> MSG_STATE : 114 <
XRFC> IF_NAME_I : ZSD_CS_CREATE_SALESORDER_SERVI <
XRFC> IF_NS_E : urn:sap-com:document:sap:soap:functions:mc-style <
XRFC> IF_NAME_E : ZSD_CS_CREATE_SALESORDER_SERVI <
XRFC> ISSHORTCUT : <
XRFC> TRC_PATT : WSTEST <
XRFC> TRC_SSID : PRD_19 <
XRFC> TRC_USER : <
XRFC> TRC_TS : 20140609173409 <
XRFC> TRC_COUNT : 99 <
XRFC> TRC_EXT : <
XRFC> COMPLETE : OK <
XRFC> CALLEDPROG : ZSD_CS_CREATE_SALESORDER_SERVI <
XRFC> SOAP_APPLI : urn:sap-com:soap:runtime:application:rfc:710 <
XRFC> CONF_ID : 00155D0B45301EE3AEFDAD78756555CE <
XRFC> BIND_ID : 00155D0B45301EE3AEFDAD787565B5CE <
XRFC> OP_NAME : ZsdCsCreateSalesorder <
XRFC> COMM_PATRN : Method:ZsdCsCreateSalesorder <
XRFC> OP_NS : urn:sap-com:document:sap:soap:functions:mc-style <
XRFC> REMADDRESS : 172.16.11.43 <
XRFC> DT_OBJ : ZSD_CS_CREATE_SALESORDER_SERVI <
XRFC> MEMCONSUMP : 296291 <
XRFC> WSHOST : <
XRFC> WSPORT : <
XRFC> WSPROT : <
XRFC> WSCLIENT : <
XRFC> WSPATH : <
XRFC> PXYHOST : <
XRFC> PXYPORT : <
XRFC> USEDRFCDES : <
XRFC> BONAME : <
XRFC> PROCCOMP : <
XRFC> DEPLOYUNIT : <
XRFC> ------------------------------------------------------------------ <
XRFC> <
XRFC> TRACE SOAP RUNTIME - trace records <
XRFC> <
XRFC> ------------------------------------------------------------------ <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER <
XRFC> ->EXECUTE_PROCESSING Exception handling for IF "ZSD_CS_CREATE <
XRFC> _SALESORDER_SERVI" OP name "ZsdCsCreateSalesorder" MSG ID <
XRFC> "91C57815916E421CA9F3D652FFACE9C7" user "STULZWEBSERV" <
XRFC> <
XRFC> <
XRFC> E SOAP_RUNTIME 20140609173429.7240000 : CL_SOAP_RUNTIME_SERVER <
XRFC> ->EXECUTE_PROCESSING CX_SOAP_ROOT : An exception has occurred. | <
XRFC> program: CL_SOAP_RUNTIME_ROOT==========CP include: CL_SOAP <
XRFC> _RUNTIME_ROOT==========CM004 line: 120 <
XRFC> <
XRFC> <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER <
XRFC> ->EXECUTE_PROCESSING CX_SY_NO_HANDLER : An exception with the type <
XRFC> CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor <
XRFC> declared in a RAISING clause | program: SAPLSTXD include: LSTXDFDB <
XRFC> line: 200 <
XRFC> <
XRFC> <
XRFC> E SOAP_RUNTIME 20140609173429.7400000 : CL_SOAP_RUNTIME_SERVER <
XRFC> ->EXECUTE_PROCESSING CX_SY_OPEN_SQL_DB : The database returned a <
XRFC> value containing an error | program: SAPLSTXD include: LSTXDFDB <
XRFC> line: 227 <
XRFC> <
XRFC> ---------------------------------------------------------------------
XRFC> End of user trace

Open hub error when generating file in application server

Hi, everyone.
I'm trying to execute an open hub destination that save the result as a file in the application server.
The issue is: in production environment we have two application servers, XYZ is the database server, and A01 is the application server. When I direct the open hub to save file in A01 all is working fine. But when I change to save to XYZ I´m getting the following error:
>>> Exception in Substep Start Update...
Message detail: Could not open file "path and file" on application server
Message no. RSBO214
When I use transaction AL11, I can see the file there in XYZ filesystem (with data and time correspondent to execution), but I can´t view the content and size looks like be zero.
Possible causes I already checked: authorization, disk space, SM21 logs.
We are in SAP BW 7.31 support package 6.
Any idea what could be the issue or where to look better?
Thanks and regards.
Henrique Teodoro

Hi, there.
Posting the resolution for this issue.
SAP support give directions that solved the problem. No matter in which server (XYZ or A01) I logon or start a process chains, the DTP job always runs in A01 server, and it causes an error since the directory doesn´t exist in server XYZ.
This occurs because DTP settings for background job was left blank. I follows these steps to solve the problem:
- open DTP
- go to "Settings for Batch Manager"
- in "Server/Host/Group on Which Additional Processes Should Run" I picked the desired server
- save
After that, no matter from where I start the open hub extraction, it always runs in specified server and saves the file accordingly.
Regards.
Henrique Teodoro

Error occured in the phase MOVE NAMETABS while updating patch.

Hi Gurus
When i implementing a SP15 to SP16 in a queue, i got the Dump.
Please help me in this issue.
The import was stopped, since an error occurred during the phase
 IMPORT_PROPER, which the Support Package Manager is unable to resolve
 without your input.
 After you have corrected the cause of the error, continue with the
 import by choosing Support Package -> Import queue from the initial
 screen of the Support Package Manager.
 The following details help you to analyze the problem:
 - Error in phase: IMPORT_PROPER
 - Reason for error: TP_STEP_FAILURE
 - Return code: 0008
 - Error message: OCS Package ALL, tp step "6", return code 0008
 Notes on phase IMPORT_PROPER
 In this phase repository objects and table entries are imported. This
 phase can terminate due to the following reasons:
 o TP_INTERFACE_FAILURE: The tp interface could not be called.
 o TP_FAILURE: The program tp could not be executed. For more
 information on this, see the SLOG or ALOG log file.
 o TP_STEP_FAILURE: A tp step could not be executed. To find the cause
 of the error, see the appropriate log, such as the import log.
 If the cancelation message contains a tp step 6, N or S, the step in
 question is independent of the transport request. You can find these
 logs under the node Import steps not specific to transport request
 in the log overview.
 Alternatively, you can find these logs in the following files in the
 log directory of your transport directory (usually:
 /usr/sap/trans/log):
 - tp Step 6: P<YY><MM><DD>.<SID>
 - tp Step N: N<YY><MM><DD>.<SID>
 - tp Step S: DS<YY><MM><DD>.<SID>
 You can display these files using the report RSPUTPRT or by calling
 transaction AL11.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Regards,
Ganesh

Hi jazz,
I want to update the patch SAPKA70016 for SAP_ABA component.
Queue log
System : ISP
tp path : tp
Version and release: 372.04.36 700
Activate inactive nametabs
End date and time : 20081215012202
Ended with return code: ===> 8 <===
TP request log is
START CMDIMPORT ISP L 20081222014354 DDIC usirs254 20081222014354043
STOP CMDIMPORT ISP L 20081222014401 DDIC usirs254 20081222014354043
START DD IMPORT ISP H 20081222014540 DDIC usirs254 20081222014540574
STOP DD IMPORT ISP H 20081222014616 DDIC usirs254 20081222014540574
START DD ACTIVATION ISP A 20081222014617 DDIC usirs254
START tp_getprots ISP J 20081222014617 DDIC usirs254
STOP tp_getprots ISP J 20081222014723 DDIC usirs254
STOP DD ACTIVATION ISP A 20081222014723 DDIC usirs254
START imp all ISP 20081222014723 DDIC usirs254 20081222014723434
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O ISP S 20081222014723 DDIC usirs254 20081222014723434
START tp_getprots ISP S 20081222014723 DDIC usirs254 20081222014723434
STOP tp_getprots ISP S 20081222014726 DDIC usirs254 20081222014723434
STOP DISTRIBUTION OF DD-O ISP S 20081222014726 DDIC usirs254 20081222014723434
INFO TBATG CONVERSION OF ISP N not needed DDIC usirs254 20081222014723434
START MOVE NAMETABS ISP 6 20081222014726 DDIC usirs254 20081222014723434
START tp_getprots ISP P 20081222014726 DDIC usirs254 20081222014723434
ERROR ALL ISP 6 0008 20081222014743 DDIC usirs254 20081222014723434
STOP tp_getprots ISP P 20081222014747 DDIC usirs254 20081222014723434
STOP MOVE NAMETABS ISP 6 20081222014747 DDIC usirs254 20081222014723434
ERROR: stopping on error 8 during MOVE NAMETABS
START INFORM SAP-SYSTEM OF ISP Q 20081222014747 DDIC usirs254 20081222014723434
START tp_getprots ISP Q 20081222014747 DDIC usirs254 20081222014723434
STOP tp_getprots ISP Q 20081222014748 DDIC usirs254 20081222014723434
STOP INFORM SAP-SYSTEM OF ISP Q 20081222014748 DDIC usirs254 20081222014723434
STOP imp all ISP 0008 20081222014748 DDIC usirs254 20081222014723434
START CMDIMPORT ISP L 20081222015155 DDIC usirs254 20081222015155637
STOP CMDIMPORT ISP L 20081222015158 DDIC usirs254 20081222015155637

Open data Set Error?

Hi Guys,
              I am using Open dataset for downloading the data into Application server   .I am getting the error file path is not opened but in al11 i was able to see the path what i mentioned here except bseg.txt file.I am getting error at Open data set statement.I have to write the bseg table data into the file bseg.txt in application server.can any body suggest the solution for this problem.
          Very urgent.
wa_BSEG_file = '/interfaces/DR1/MM/outbounb/ZMMOF3007/BSEG.txt'.
OPEN DATASET wa_BSEG_file FOR OUTPUT         "Write to appl. server
                                      IN TEXT MODE
                                      Encoding default. "Open dataset Return code
IF sy-subrc = 0.
TRANSFER it_cosp1 to wa_BSEG_file.
Write : 'File Transferred BSIK'.
ELSE .
Write : 'File Not Found / Transferred BSIK'.
ENDIF.
   CLOSE DATASET wa_BSEG_file.
           Very urgent.Full marks will be alloted if u give me the correct answer.
Thanks,
Gopi.

Hi,
Due to serveral reasons
1. Check whether you have proper authority in the directory?
2. check the whether any files with same name?
3. use addition message in the open dataset statement so that you can know the system message it getting.
DATA: msg(100).
OPEN DATASET wa_BSEG_file FOR OUTPUT MESSAGE msg
IN TEXT MODE Encoding default.
aRs

BW AL11 error

Similar Messages

Maybe you are looking for