BW data access problem

BPS Gurus,
I have monthly salary calculated from annual salary divided by 12 and available in the SEM-BPS/BW Trans cube (done thru fox).
Fox code is as follows & it works fine.
DATA EMPID TYPE ZSEM_EID.
FOREACH EMPID.
{ZSEM_MSAL,EMPID} = {0ANSALARY,EMPID}/ 12.
ENDFOR.
My requirement: If an employee is on leave, then monthly salary should become zero.
So I modified the above fox code as follows:
DATA EMPID TYPE ZSEM_EID.
DATA STAT TYPE ZSEM_SCAT.
FOREACH EMPID.
{ZSEM_MSAL,EMPID,STAT} = {0ANSALARY,EMPID,STAT} /12.
IF STAT = 'LEAVE'.
{ZSEM_MSAL,EMPID,STAT}=0.
ENDIF.
ENDFOR.
The fox code is not getting executed. With debugging mode, I am able to force the STAT value (= Leave) and get it calculated. I note that STAT master data in BW is stored in Hierarchy structure. I have also accordingly created Hierarchy in Planning level data selection.
Does master data value in Hierarchy structre pose any problem in FOX calculation?
Looking forward for guidance,
Thanks

Hello Genesh,
i think that the problem in your fox is the "foreach".
"Foreach" works only for transactional data.
You can use "do" but you must but specify the escape condition.
If you want to use "foreach" for the refernce data see sap note number 646618.
I hope help you.
Davide

Similar Messages

Master data access problem

Hi All
I have a master data object ..it is a z object where it has customer as the key and the attributes are salesoffice, sales dist and sales group.
I am using this master data object in one of my req where in the transaction data i get only the customer and from there i am pulling the sales office,sales dist and sales group from this master data object using the option READ MASTER DATA at the transformation level in the Rule details.
The problem is that i am able to get the data for all the customer's except 5 customers but when i get in to the master data and check the sales off, sales dist and region is maintained there, but still it is not picking only for those 5 customers and for rest of the customers it is working fine..
so i thought i should be some master data problem and i deleted that master data using delete master data option with out sid's and reloaded it again and after that i reloaded the transaction data back..but still it is having the same problem but at the object level the data is there...
Can any one suggest me as to wat would the problem can be?
Please i appreciate your quick repaonses.
Regards
Shilpa

Hi Shilpa
May i suggest an alternate solution?
Instead of reading values into your infoprovider using Read master data, you can enable the attributes as navigational attributes and include them in your infoprovider. You will be able to see them in reporting and also use filters or variables on the attributes too.
You can also check if the attribute change run for the loaded master data is done before trying to run the report.
I hope this helps.
Thanks.

3g data access problems on lumia 920

i regret my decision to switch to lumia 920 after using samsung for 2yrs. cannot connect to 3g on my lumia 920. all I have spent is in vain. plan to switch to android or iOs now.

Did you check Settings > access point to see if the access point is active (tap it to activate)? Would help to know which country/carrier. Did you buy the phone new? Is it maybe SIM locked?
We do not mind helping, but a bit more information instead of a pointless rant would be helpful.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Cannot resolve symbol-- data access problem

hi, everyone, i am new to java... thx for helping me.
i have two files
1) dls.java
2) SliderDemo.java
in the dls.java i have the following coding:
JPanel slider = new SliderDemo(this);
slider.framesPerSecond(0);
and in the SliderDemo.java i have following coding:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class SliderDemo extends JPanel implements ActionListener {
//This label uses ImageIcon to show the doggy pictures.
JLabel picture;
dls mydls;
JSlider framesPerSecond;
int i;
public SliderDemo(dls mydls) {
this.mydls = mydls;
framesPerSecond = new JSlider(JSlider.HORIZONTAL, -10, 10, 0);
framesPerSecond.addChangeListener(new SliderListener());
//Turn on labels at major tick marks.
framesPerSecond.setMajorTickSpacing(10);
framesPerSecond.setMinorTickSpacing(1);
framesPerSecond.setPaintTicks(true);
framesPerSecond.setPaintLabels(true);
framesPerSecond.setBorder( BorderFactory.createEmptyBorder(0,0,10,0));
.....etc
when i compile the dls.java
it told me cannot resolve symbol , framePerSecond...
help!!!why i can't resolve the symbol?
thx all experts.
yours,
Terry

cannot resolve symbol , framePerSecondPerhaps because you declared a variable whose name is "framesPerSecond" and then you tried to use "framePerSecond" instead of that?

Data access problem through SP

Create PROC InsertTest
AS
DECLARE @I int = 1;
DECLARE @X int;
WHILE @I < 1000000
BEGIN
INSERT INTO dbo.InMemoryTest
VALUES (@I, @I + 1 * @I * log(@I) + tan (@I) + rand() / cos(@I));
INSERT INTO dbo.InMemoryTest
VALUES (@I + 1, @I + 1 * @I * log(@I) + tan (@I) + rand() / cos(@I));
SET @I =+ 2;
END

Change the statement SET
@I =+
2; to
SET @I
+= 2;
Create PROC InsertTest
AS
DECLARE @I int = 1;
DECLARE @X int;
WHILE @I < 1000000
BEGIN
INSERT INTO dbo.InMemoryTest
VALUES (@I, @I + 1 * @I * log(@I) + tan (@I) + rand() / cos(@I));
INSERT INTO dbo.InMemoryTest
VALUES (@I + 1, @I + 1 * @I * log(@I) + tan (@I) + rand() / cos(@I));
SET @I += 2;
END
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Data access problem

Hi all,
Page is taking time at the time of displaying even using type 4 driver, my application architecture is :
my pages are on my local machine and database is on other machine. Please provide the information.
Thanks

[email protected] wrote:
but page is taking time in loading.1) Make sure you have current versions and drivers.
2) Analyze and improve your query.
3) Analyze and improve your application logic.
4) Analyze and improve your hardware.
5) Overall, be scrupulous with your syntax and grammar. Your post belies some carelessness in this area.
Good luck!

Problems in using Gplus Data Access Component to invoke SAP-RFCs

Hello integration-gurus!
We need to make RFCalls out of routing strategies within Genesys Universal Routing Server (URS).
We learned that we need to install the Gplus Data Access Component (DAC) in order to do so. After copying the rfc32lib.dll into installation directory of DAC the DAC establishes a valid RFC-connection to ourer SAP-CRM 5.0 system. But if the URS requests the definition of the specific remotefunction (the DAC provides this information as a WSDL for URS) it gets a timeout. Now we think that we need special files (perhaps XML-schemata provided by SAP) to transform the DDIC-types provided by the RFC into SOAP-specific datatypes communicated from DAC to URS.
Where can we get these files?
Has anyone experiences with such an integration scenario?
Kind regards
Michael

Hello integration-gurus!
We need to make RFCalls out of routing strategies within Genesys Universal Routing Server (URS).
We learned that we need to install the Gplus Data Access Component (DAC) in order to do so. After copying the rfc32lib.dll into installation directory of DAC the DAC establishes a valid RFC-connection to ourer SAP-CRM 5.0 system. But if the URS requests the definition of the specific remotefunction (the DAC provides this information as a WSDL for URS) it gets a timeout. Now we think that we need special files (perhaps XML-schemata provided by SAP) to transform the DDIC-types provided by the RFC into SOAP-specific datatypes communicated from DAC to URS.
Where can we get these files?
Has anyone experiences with such an integration scenario?
Kind regards
Michael

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How to get current logged-in user name in data access driver or in universe

In universe, to get the current log in user is via @Variable('BOUSER').
Right now, I need to be able to get the user name in the data access driver. I am writing a customized data access driver because we need to patch some where clause on the the query generated by the universe based on the logged-in user info. I only think of using end_sql parameter or adding an universe level filter to patch the @Variable('BOUSER') to the query, which would not work if user want to use customized query.
Can anyone tell me how to get currentBO user name from connection server ? or how @Variable('BOUSER') is translated into the logged-in user name in the universe?

I do not know your EJB Service. But you should pass the credentials of the current logged on portal user to your service. That's not by default I think.
I had a similar problem with CAF developed webservices. I had to turn on permission checks in my web service and passed the credentials via logon ticket.
Regards, Bernd

'Data Access Error' while trying to delete period using Table Editor in FDM

Hi,
I'm trying to delete a period that has been entered wrongly using Tools->Table Editor option.
But when I try to 'Update Grid' after deleting the Period,I get 'Data Access Error'.
Could any one let me know how to solve the error.
Thanks in advance

Hi Kelly,
There is no data that is entered in that period.The data will be entered for that period next month.
POV is also not set to that period,but still the problem persists.
Thanks

Data access error during workflow- import in FDM

I am trying to perform import in FDM.But getting 'Data Access Error'.
Any suggestions on this......

Hello,
I have the same problem.
Can anyone help.
Here is the log error:
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. ORA-06550: line 2, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 2, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 3, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 3, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 4, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 4, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 5, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 5, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 6, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 6, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 7, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 7, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 8, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 8, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 9, column 13:
PL/SQL: ORA-00913: too many values
ORA-06550: line 9, column 1:
PL/SQL: SQL Statement ignored
ORA-06550: line 10, column 13:
BEGIN
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 45645656,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 456546564,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 4556465454,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 546,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 654,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
INSERT INTO tWselhou3242683022 (PartitionKey, CatKey, PeriodKey, DataView, Account, Entity, ICP, UD1, UD2, UD3, UD4, UD5, UD6, UD7, UD8, UD9, UD10, UD11, UD12, UD13, UD14, UD15, UD16, UD17, UD18, UD19, UD20, Desc1, Desc2, Attr1, Attr2, Attr3, Attr4, Attr5, Attr6, Attr7, Attr8, Attr9, Attr10, Attr11, Attr12, Attr13, Attr14, MemoKey, Amount ) VALUES (752, 12, '20090131', 'YTD', 'Required Field Missing.', 'Required Field Missing.', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', '', 0, 564,00);
END;
Procedure.................................... clsDataManipulation.fExecuteDML
Component.................................... upsWDataWindowDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpDataPump.fProcessSQLInsertValues
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpDataPump.fImportTextFile
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False
** Begin FDM Runtime Error Log Entry [2009-01-30-12:44:44] **
ERROR:
Code......................................... -2147217900
Description.................................. Data access error.
Procedure.................................... clsImpProcessMgr.fLoadAndProcessFile
Component.................................... upsWObjectsDM
Version...................................... 931
Thread....................................... 268
IDENTIFICATION:
User......................................... selhouda
Computer Name................................ FR900VM0044
App Name..................................... test
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ PARHYPT3.WORLD
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... LOCATION4
Location ID.................................. 752
Location Seg................................. 6
Category..................................... WLCAT
Category ID.................................. 12
Period....................................... janv - 2009
Period ID.................................... 31/01/2009
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... True
Is Auditor................................... False

Urgent: how to really seperate business logic class from data access class

Hello,
I've this problem here on my hand and i really need help urgently. so please allow me to thank anyone who replies to this thread =)
Before i go any futhur, let me present a scenario. this will help make my question clearer.
"A user choose to view his account information"
here, i've attempted to do the following. i've tried to seperate my application into 3 layers, the GUI layer, the business logic layer, and the data access layer.
classically, the GUI layer only knows which object it should invoke, for example in the case above, the GUI would instantiate an Account object and prob the displayAcctInfo method of the Account object.
here is how my Account class looks like:
public class Account
private acctNo;
private userid;
private password;
private Customer acctOwner;
the way this class is being modelled is that there is a handle to a customer object.
that being the case, when i want to retrieve back account information, how do i go about retrieveing the information on the customer? should my data access class have knowledge on how the customer is being programmed? ie setName, getName, setAge, getAge all these methods etc? if not, how do i restore the state of the Customer object nested inside?
is there a better way to archieve the solution to my problem above? i would appriciate it for any help rendered =)
Yours sincerely,
Javier

public class AccountThat looks like a business layer object to me.
In a large application the GUI probably shouldn't ever touch business objects. It makes requests to the business layer for specific information. For example you might have a class called CustomerAccountSummary - the data for that might come entirely from the Account object or it might come from Account and Customer.
When the GUI requests information it receives it as a 'primitive' - which is a class that has no behaviour (methods), just data. This keeps the interface between the GUI and business layer simple and makes it easier to maintain.
When using a primitive there are four operations: query, create, update and delete.
For a query the gui sets only the attributes in the primitive that will be specifically queried for (or a specialized primitive can be created for this.) The result of a query is either a single primitive or a collection of primitives. Each primitive will have all the attributes defined.
For a create all of the attributes are set. The gui calls a method and passes the primtive.
For an update, usually all fields are defined although this can vary. The gui calls a method and passes the primitive.
For a delete, only the 'key' fields are set (more can be but they are not used.) The gui calls a method and passes the primitive.
Also keep in mind that a clean seperation is always an idealization. For example verify that duplicate records are not created is a business logic requirement (the database doesn't care.) However, it is much easier and more efficient to handle that rule in the database rather than in the business layer.

Solaris 8 hangs and data access error on reboot

Hi
using solaris 5.8 on UltraSPARC-IIi 360MHz.
I know it is an old hardware but similiar hardware is running fine. here is the issue,
System booted : works okay for some time then display was hung so system was rebooted ..it gave data access error. again rebooted and it came up fine..
I have pasted the /var/adm/messages here..
http://pastebin.com/m5d2d1d53
Is it a CPU problem or Hard disk or memory issue ? or something else ?
what could be solution , a kernel patch is an option ?
uname -a
SunOS sparc5 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-5_10
test-all at OBP did not show any error.. passed all.
Thanks

I cant see the /var/adm/messages output, Since you have already performed a Full Diagnostic check, then you boot your solaris using CD and then perform full FSCK on root File Systems and see any errors get reported. Keep doing fsck 2 -3 times untill all the errors are clean.
Also you must check the latest patches available for this system architecture.

Data access in Teststand/LabVIEW through OPC connection

We are using TestStand 2.0 and LabVIEW6.2 and following problem occurs when accessing the datas from UUT through OPC.
For the first UUT i get the measurement datas but starting the next UUT causes a system hang up. The corresponding LabVIEW VI stops at the connect to the OPC Server it doesn't read the selected item. Only with LabVIEW there is no problem launching OPC data access for multiple times. Does anyone have expierence with this configuration: TestStand-LabVIEW-OPC?

For your information, there is a new TestStand Add-on "OPC DA Connect" which adds a StepType Palette dedicated to OPC Data Access.
You can configure each step by browsing the OPC servers on your network and browsing variables within these servers.
This toolkit has free deployment licence.
Hoping this helps.
Jean-Louis SCHRICKE
├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
├ CTD - Certified TestStand Developer (2004 & 2007)
└ CLD - Certified LabVIEW Developer (2003 & 2005)

BW data access problem

Similar Messages

Maybe you are looking for