BW stats Query problem!
Hi All,
Just need some help on this:
Scenario: I created a query on the stats multiprovider.
The query shows exceptions (red / green) indicating that data is loaded successfully to data targets or not.Red for failure and green for success.It is just supposed to show colors as it is used by end users.
Problem : What happens is at times wen data is loaded fine to the data targets but 0 records updated its showing red! which is a concern as its quite misleading for users. they are taking it to be data load failed though its actually a zero records update through full -update.Now i checked the table RSDDSTATWHM for such requests.There seems to be no entries in that table too.
Is it connected or can some one suggest how to handle this scenario.Its again a production environment and needs quick resolution.....tell me if you want to knw more about it..........
Check your traffic light settings in transaction SPRO?
It's under the following path or similar path:
SAP BIW => Automated Processes => Monitor Settings => Set Traffic Light Color.
Don't forget the points if that helps...
Ken
Similar Messages
-
How to edit the records value fetched by select statement query in sqldever
How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AMHi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter -
Hi,
I had used the RSZC transaction to migrate query 0FIGL_VC1_Q0002 - Cash flow statement, based on 0FIGL_VC1 to a custom virtual cube which extracts data from a cube containing general ledger accounting (New) data. on execution of the query, no data is displayed.
In a similar fashion the query 0FIGL_V10_Q0001, which is based on virtual cube 0FIGL_V10 was migrated to the same custom virtual cube and was found to be executing.
has anyone faced similar issue with cash flow statement query?
Regards,
SainathLook at the import parameters - there is a hard coded and change it to Z version
https://forums.sdn.sap.com/click.jspa?searchID=10104420&messageID=5012838
Hope it Helps
Chetan
@CP.. -
Hello APEX people,
I posted my problem here:
Designing LOV Query Problem
What I have is a sequence like this:
CREATE SEQUENCE
DR_SEQ_FIRST_SCHEDULE_GROUP
MINVALUE 1 MAXVALUE 7 INCREMENT BY 1 START WITH 1
CACHE 6 ORDER CYCLE ;
What I need would be a SQL query returning all possible values oft my sequence like:
1
2
3
4
5
6
7
I want to use it as a source for a LOV...
The reason why I use the cycling sequence is: My app uses it to cycle scheduling priorities every month to groups identified by this number (1-7).
In the Admin Form, I want to restrict the assignment in a user friendly way - a LOV.
Thanks
JohannHere ist the solution (posted by michales in the PL/SQL forum):
SQL> CREATE SEQUENCE
dr_seq_first_schedule_group
MINVALUE 1 MAXVALUE 7 INCREMENT BY 1 START WITH 1
CACHE 6 ORDER CYCLE
Sequence created.
SQL> SELECT LEVEL sn
FROM DUAL
CONNECT BY LEVEL <= (SELECT max_value
FROM user_sequences
WHERE sequence_name = 'DR_SEQ_FIRST_SCHEDULE_GROUP')
SN
1
2
3
4
5
6
7
7 rows selected. -
Printing Prepared Statement Query
Hi all,
Is it possible to print Prepared Statement query. When i give System.out.println(query);, i get the query with '?' and not with the actual value sent. How can i print the query with the value passed in place of the '?' ?Hi all,
Is it possible to print Prepared Statement
tatement query. When i give
System.out.println(query);, i get the query with '?'
and not with the actual value sent. How can i print
the query with the value passed in place of the '?' ?The simple answer is that you can't (AFAIK), but some database drivers are able to log the sql statements.
Kaj -
SQL+-MULTI TABLE QUERY PROBLEM
HAI ALL,
ANY SUGGESTION PLEASE?
SUB: SQL+-MULTI TABLE QUERY PROBLEM
SQL+ QUERY GIVEN:
SELECT PATIENT_NUM, PATIENT_NAME, HMTLY_TEST_NAME, HMTLY_RBC_VALUE,
HMTLY_RBC_NORMAL_VALUE, DLC_TEST_NAME, DLC_POLYMORPHS_VALUE,
DLC_POLYMORPHS_NORMAL_VALUE FROM PATIENTS_MASTER1, HAEMATOLOGY1,
DIFFERENTIAL_LEUCOCYTE_COUNT1
WHERE PATIENT_NUM = HMTLY_PATIENT_NUM AND PATIENT_NUM = DLC_PATIENT_NUM AND PATIENT_NUM
= &PATIENT_NUM;
RESULT GOT:
&PATIENT_NUM =1
no rows selected
&PATIENT_NUM=2
no rows selected
&PATIENT_NUM=3
PATIENT_NUM 3
PATIENT_NAME KKKK
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 4
HMTLY_RBC_NORMAL 4.6-6.0
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE 60
DLC_POLYMORPHS_NORMAL_VALUE 40-65
ACTUAL WILL BE:
&PATIENT_NUM=1
PATIENT_NUM 1
PATIENT_NAME BBBB
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 5
HMTLY_RBC_NORMAL 4.6-6.0
&PATIENT_NUM=2
PATIENT_NUM 2
PATIENT_NAME GGGG
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE 42
DLC_POLYMORPHS_NORMAL_VALUE 40-65
&PATIENT_NUM=3
PATIENT_NUM 3
PATIENT_NAME KKKK
HMTLY_TEST_NAME HAEMATOLOGY
HMTLY_RBC_VALUE 4
HMTLY_RBC_NORMAL 4.6-6.0
DLC_TEST_NAME DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE 60
DLC_POLYMORPHS_NORMAL_VALUE 40-65
4 TABLES FOR CLINICAL LAB FOR INPUT DATA AND GET REPORT ONLY FOR TESTS MADE FOR PARTICULAR
PATIENT.
TABLE1:PATIENTS_MASTER1
COLUMNS:PATIENT_NUM, PATIENT_NAME,
VALUES:
PATIENT_NUM
1
2
3
4
PATIENT_NAME
BBBB
GGGG
KKKK
PPPP
TABLE2:TESTS_MASTER1
COLUMNS:TEST_NUM, TEST_NAME
VALUES:
TEST_NUM
1
2
TEST_NAME
HAEMATOLOGY
DIFFERENTIAL LEUCOCYTE COUNT
TABLE3:HAEMATOLOGY1
COLUMNS:
HMTLY_NUM,HMTLY_PATIENT_NUM,HMTLY_TEST_NAME,HMTLY_RBC_VALUE,HMTLY_RBC_NORMAL_VALUE
VALUES:
HMTLY_NUM
1
2
HMTLY_PATIENT_NUM
1
3
MTLY_TEST_NAME
HAEMATOLOGY
HAEMATOLOGY
HMTLY_RBC_VALUE
5
4
HMTLY_RBC_NORMAL_VALUE
4.6-6.0
4.6-6.0
TABLE4:DIFFERENTIAL_LEUCOCYTE_COUNT1
COLUMNS:DLC_NUM,DLC_PATIENT_NUM,DLC_TEST_NAME,DLC_POLYMORPHS_VALUE,DLC_POLYMORPHS_
NORMAL_VALUE,
VALUES:
DLC_NUM
1
2
DLC_PATIENT_NUM
2
3
DLC_TEST_NAME
DIFFERENTIAL LEUCOCYTE COUNT
DIFFERENTIAL LEUCOCYTE COUNT
DLC_POLYMORPHS_VALUE
42
60
DLC_POLYMORPHS_NORMAL_VALUE
40-65
40-65
THANKS
RCS
E-MAIL:[email protected]
--------I think you want an OUTER JOIN
SELECT PATIENT_NUM, PATIENT_NAME, HMTLY_TEST_NAME, HMTLY_RBC_VALUE,
HMTLY_RBC_NORMAL_VALUE, DLC_TEST_NAME, DLC_POLYMORPHS_VALUE,
DLC_POLYMORPHS_NORMAL_VALUE
FROM PATIENTS_MASTER1, HAEMATOLOGY1, DIFFERENTIAL_LEUCOCYTE_COUNT1
WHERE PATIENT_NUM = HMTLY_PATIENT_NUM (+)
AND PATIENT_NUM = DLC_PATIENT_NUM (+)
AND PATIENT_NUM = &PATIENT_NUM;Edited by: shoblock on Nov 5, 2008 12:17 PM
outer join marks became stupid emoticons or something. attempting to fix -
Hi All,
Can some one help me in writing the stock statement query which includes
Warehouse Code, Inventory Transfer No, Inventory Transfer Date, Item Code, Item Description, Batch No/Serial No, Expiry date, Delivery Note No if any
We have add on which links the Inventory Transfer to Delivery. We can copy the inventory transfers to delivery where inventory transfer no will be stored in the item level UDF (u_delno)
Thanks in advanceTry from here to start:
Select T1.WhsCode, T0.DocNum, T0.DocDate, T1.ItemCode, T1.Dscription, T1.SerialNum, T1.u_delno
FROM dbo.OWTR T0
INNER JOIN dbo.WTR1 T1 ON T1.DocEntry = T0.DocEntry
Thanks,
Gordon -
EJB Transaction timeout and Statement Query Timeout
I am looking for some details on how statement query timeout is set when statement execution is part of the session bean transaction. I have done some test in webshere 6.1. and JBoss 5.0 and not getting the desired behavior. My understanding is following
- DB is Oracle 11g
- EJB transaction is set to 5 mins.
- Query time out setting is set to default vaule (not sure what is the default value)
- Session bean is updating say customer record using PreparedStatement
- Prior to calling session bean method I am locking the customer record using external/db tool and holding the lock.
- Call session bean method. Method waits endlessly for the lock to be acquired. No transaction rollback after 5 mins.
- After 10 minutes commit the transaction in the external db tool
- Session bean methods throws transaction rollback.
My understanding was that query timeout is set based on transaction "time to live". Please share out thoughts.
Edited by: hdjava on Jun 18, 2010 1:06 PM
Edited by: hdjava on Jun 18, 2010 1:07 PMThe following configuration seems working:
version: OC4J (9.0.3.0.0) (build 020927.1699)
AM deployment:
- bc4j.xcfg: <jbo.ejb.txntimeout>30000</jbo.ejb.txntimeout>
- orion-ejb-jar.xml: <session-deployment name="..." timeout="0"/>
OC4J config:
- data-source: inactivity-timeout="30000"
This keeps connection open for more than default 30 mins of inactivity (30000 secs configured).
Although, oc4j console prints multiple warnings:
DriverManagerConnectionPoolConnection not closed, check your code!
Looks like this is not an intended usage - but working.
Notice that it was a test, not a production environment.
Also pls see 9033: AM as EJB Session bean: pooled connection lost for new txn
I would be thankful for any experience in running AM Session EJB w/o timeout. -
Help needed on income statement query....
Hello BW gurus,
I need to make an income-statement query which gives the following output.
The 5 Variables are
Company Code
Plant
Fiscal Period (12 months) in column
Value Type
Version
#ACCOUNT 0METYPE METYPE-DESCRIPTION COMPANYCODE PLANT SALES0RG
Sales
Cost of Sales
Gross Margin
(Sales minus Cost Of Sales)
General &Admin
Other
Operating Income
(Gross margin minus G&A minus Other)
Interest Income
Interest Expense
Net Income before Tax
(Operating Income minus Interest Income - Interest expense)
Taxes
Net income
(Net Income before Tax minus Taxes)
Note: Sales,cost of sales,general and admin,other,interesat income,interest expense,taxes are under the hierarchy of ACCOUNT.
Please make a quick response.
100% points will be awarded.
Thanks in advance.
Sam MathewPlease read these:
When your query takes too long
When your query takes too long ...
How to Post a SQL statement tuning request
HOW TO: Post a SQL statement tuning request - template posting -
General stock statement query.
hi ,
can anybody help me in getting stock statement query.... no selection criteria it has to disply all the ware house with Opening stock......inward qty, outward qty,closing stock . (this general) and like this i have to get stock details date wiseHi Vignesh......
I'm in confusion. You are asking the same question with different meanings.
As you are already suggested to use Inventory Posting List. You get all of your answers to your question.
It will give you the stock Opening, In, Out, Closing Warehouse Wise (Particular/All), Date wise, Transaction wise...
Please check this path to refer This Report.
Inventory->Inventory Reports-->Inventory Posting List......
If you have different requirement then please do mention.
Regards,
Rahul -
Have any one got the stock statement query report in the folowing format....
1.ItemCode
2.Item Description
3.Item Price
4.Opening
5.Receipts
6.Issues
7.Closing
8. Value
The selection criteria are:
3.Posting Date
from wh
to wh
help me in making stock statement query
regards,
VigneshHi
Check This
select w0.itemcode, i0.docdate, w0.whscode, w0.onhand - isnull (sum (i0.inqty - i0.outqty), 0), 0
from oitw w0 left outer join oinm i0 on w0.itemcode = i0.itemcode and w0.whscode = i0.warehouse
where i0.docduedate >= [%0]
group by w0.itemcode, w0.whscode, w0.onhand, i0.docdate
having w0.itemcode = [%1] and w0.onhand - isnull (sum (i0.inqty - i0.outqty), 0) >= 0
union
select w0.itemcode, i0.docdate, w0.whscode, 0, -(w0.onhand - isnull (sum (i0.inqty - i0.outqty), 0))
from oitw w0 left outer join oinm i0 on w0.itemcode = i0.itemcode and w0.whscode = i0.warehouse
where i0.docduedate >= [%0]
group by w0.itemcode, w0.whscode, w0.onhand, i0.docdate
having w0.itemcode = [%1] and w0.onhand - isnull (sum (i0.inqty - i0.outqty), 0) < 0
or
SELECT T0.ITEMCODE, T0.DSCRIPTION,T0.OPENQTY, T0.OPENVALUE, T0.INQTY, T0.INQTY*T0.PRICE AS 'RCPT VAL', T0.OUTQTY,T0.OUTQTY*T0.PRICE AS 'ISS. VAL', T0.INQTY-T0.OUTQTY AS 'CLOSING STOCK QTY',((T0.INQTY-T0.OUTQTY)*(T0.CALCPRICE)) AS 'CLOSING STOCK VAL' FROM OINM T0 WHERE T0.DOCDATE >=[%0] AND T0.DOCDATE <=[%1]
Thanks
Kevin
Edited by: Kevin Shah on Oct 23, 2010 5:37 PM -
Named query problem with "like" statement
I'm having issues with a named query that contains a 'like' statement in it. I have other named queries that have like statements that have hardcoded like values in them that work fine.
(i.e. select * from foo where foo.col1 like 'foo%' )
But when the like value to be tested is a parameter, it doesn't seem to work at all, no matter what variation i've tried, other than no wildcards.
(i.e.
this DOES work
select * from foo where foo.col1 like #fooParm
this DOES NOT work
select * from foo where foo.col1 like '%#fooParm%'
Any suggestions on how to get this to work?
Thanks in advanceTry building your select statement in a different way.
Instead of:
select * from foo where foo.col1 like '%#fooParm%'
Try something like:
select * from foo where foo.col1 like '#fooParm'
And include the wild cards in the parameter.
i.e. if fooParam was 'abc', make fooParm = '%abc%' -
Hi Greg,
I had created a view on a table which doesn't have Primary Key, but it has Unique and Not Null constraints on required columns.
I had wrote a procedure to query the data on VIEW. I have experienced strange problem, very first call to procedure will take more time than succeeding requests. For example from second request onwards, it returns data in < 2 Sec, but first transaction is taking 12 Sec to 30 Sec.
I thought that very first time VIEW is taking time to refresh it self. So, I added FORCE keyword in CREATE VIEW stattement. However, that doesn't helped out.
In my further investigation I came to know that base table on which VIEW created, has to be loaded in to memory before querying on VIEW.
So, I had executed a simple select statement on base table, before I execute VIEW query in procedure.
With this change I got results consistently < 2 Sec all the times.
My question is instead of executing the select statement on base table is there a way to load base tables data in memory before querying on VIEW?
Thanks,
SubbaraoHi,
A view is nothing but parsed SQL statements stored in the database, a view may or may not run faster. If you execute the SQL used to define the view how much time is it taking. If you want try looking at MATERIALIZED VIEW , that may help you.
thanks -
This report will take delivery document number and delivery date from user and fetches details from delivery table and fetches
corresponding sales order details and billing details and displays sales order details with ALV list.
<< Please only post the relevant portions of your code >>
i just want to know that is this way of fetching the data into internal table okay ?are there any better ways of fetching the data into the internal table ? why is it looping in work area of lips, why not in likp?
(plz dont use field-symbols or oo abap or macros) I WANT TO USE PLAIN AND SIMPLE ABAP STATEMENTS LIKE ABOVE..
By using "vbeln type lips-vbeln" are we refering to the field or data element? plz suggest.
P.S. [my approach was to inner join likp and lips into itab(my internal table).
select data from kna1, vbak,vbap,vbrp into respective internal tables like it_kna1,it_vbak etc.
then using individual loops into the tables, i would use read table to insert data into itab(my final internal table) plz suggest which method wud be more efficient? ]
Edited by: Rob Burbank on Jun 8, 2009 11:54 AMok i am posting the select queries once again.
i want to know why are we looping in t_lips and why not t_likp? bcoz tlikp is the header table, if we loop thru it and then read the rest tables then what will be the problem? plz clarify with examples._
[my idea was to loop at t_likp then read t_lips.append the lips data into t_order(main internal table).then do read table on t_kna1,t_vbap etc indexing t_order. so plz suggest whether my approach was write or wrong?if wrong why?plz site any other ways of doing this query.
types: begin of ty_vbap,
vbeln type vbap-vbeln,
posnr type vbap-posnr, .....
does the declaration statement in types refer to tables or data elements? what is the difference if we declare it like:
types: begin of ty_vbap,
vbeln type vbeln,
posnr type posnr, .....
select-options:
s_deldoc FOR likp-vbeln, " Delivery
s_dldate FOR likp-lfdat. " Delivery Date
Get delivery document number,delivery date,customer number from
delivery header table
SELECT vbeln " Delivery
lfdat " Delivery Date
kunnr " Customer Number 1
FROM likp
INTO TABLE t_likp
WHERE vbeln IN s_deldoc
AND lfdat IN s_dldate.
IF sy-subrc EQ 0.
Get Customer name for customer numbers from Customer master table
SELECT kunnr " Customer Number 1
name1 " Name 1
FROM kna1
INTO TABLE t_kna1
FOR ALL ENTRIES IN t_likp
WHERE kunnr EQ t_likp-kunnr.
IF sy-subrc EQ 0.
Get delivery item number,sales document number,sales item number,
delivery quantity from delivery item table
SELECT vbeln " Delivery
posnr " Delivery Item
vgbel " Document number of
" reference document
vgpos " Item number of reference item
lfimg " Actual quantity delivered
vrkme " Sales unit
FROM lips
INTO TABLE t_lips
FOR ALL ENTRIES IN t_likp
WHERE vbeln EQ t_likp-vbeln.
IF sy-subrc EQ 0.
Get sales document number,item number,material,material description,
ordered quantity from sales item table
SELECT vbeln " Sales Document
posnr " Sales Document Item
matnr " Material Number
arktx " Short text for sales order
" item
kwmeng " Cumulative Order Quantity
vrkme " Sales unit
FROM vbap
INTO TABLE t_vbap
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vgbel
AND posnr EQ t_lips-vgpos.
IF sy-subrc EQ 0.
Get sales document number ,created date,purchase order number from
sales header table
SELECT vbeln " Sales Document
erdat " Date on Which Record Was" Created
aufnr " Order Number
FROM vbak
INTO TABLE t_vbak
FOR ALL ENTRIES IN t_lips
WHERE vbeln EQ t_lips-vgbel.
IF sy-subrc EQ 0.* Get billing document number,billing item,reference delivery document
number,delivery item number,billing item from billing item table
SELECT vbeln " Billing Document
posnr " Billing item
vgbel " Document number of the
" reference document
vgpos " Item number of the" reference" item
fklmg " Billing quantity in" stockkeeping unit
vrkme " Sales unit
FROM vbrp
INTO TABLE t_vbrp
FOR ALL ENTRIES IN t_lips
WHERE vgbel EQ t_lips-vbeln
AND vgpos EQ t_lips-posnr.
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ELSE.
Display message if records are not found for entered values
MESSAGE S000.
EXIT.
ENDIF. " IF SY-SUBRC EQ 0
Looping Delivery item internal table to assign values to order
internal table
LOOP AT t_lips INTO fs_lips.
Get delivery date and customer number for delivery document number
from delivery header internal table
READ TABLE t_likp WITH KEY vbeln = fs_lips-vbeln
INTO fs_likp.
Get customer name for customer number from customer master internal
table
IF sy-subrc EQ 0.
READ TABLE t_kna1 WITH KEY kunnr = fs_likp-kunnr
INTO fs_kna1.
Get sales document number,item number,ordered quantity for delivery
document number,item number from sales item internal table
IF sy-subrc EQ 0.
READ TABLE t_vbap WITH KEY vbeln = fs_lips-vgbel
posnr = fs_lips-vgpos INTO fs_vbap.
Get goods issue date and purchase order number for sales document
number from sales header internal table
IF sy-subrc EQ 0.
READ TABLE t_vbak WITH KEY vbeln = fs_vbap-vbeln INTO fs_vbak.
IF sy-subrc EQ 0.
Get billing document number,billing item,billing quantity for delivery
document number,delivery item number from billing item internal table
READ TABLE t_vbrp WITH KEY vgbel = fs_lips-vbeln
vgpos = fs_lips-posnr INTO fs_vbrp.
Assign sales,delivery,billing fields into respective fields of sales
order internal table
IF sy-subrc EQ 0.
fs_order-vbeln = fs_vbap-vbeln.
fs_order-posnr = fs_vbap-posnr.
fs_order-erdat = fs_vbak-erdat.
fs_order-kunnr = fs_likp-kunnr.
fs_order-name1 = fs_kna1-name1.
fs_order-aufnr = fs_vbak-aufnr.
fs_order-matnr = fs_vbap-matnr.
fs_order-arktx = fs_vbap-arktx.
fs_order-kwmeng = fs_vbap-kwmeng.
fs_order-vrkme = fs_vbap-vrkme.
fs_order-vbeln1 = fs_lips-vbeln.
fs_order-posnr1 = fs_lips-posnr.
fs_order-lfimg = fs_lips-lfimg.
fs_order-vrkme1 = fs_lips-vrkme.
fs_order-vbeln2 = fs_vbrp-vbeln.
fs_order-posnr2 = fs_vbrp-posnr.
fs_order-fklmg = fs_vbrp-fklmg.
fs_order-vrkme2 = fs_vbrp-vrkme.
APPEND fs_order TO t_order.
CLEAR fs_order.
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDIF. " IF SY-SUBRC EQ 0
ENDLOOP. " LOOP AT T_LIPS INTO FS_LIPS -
hi all,
hope all r doing fine?
anyway i have a query which is mentioned below:-
select field1,.....fieldn
from <dbtable1>
into corresponding fields of table itab
where <condition>.
select field1,...fieldn
from <dbtable2>
appending corresponding fields of table itab
where <condition>.
the above two select stmts retrieve same set of fields from two different database tables into same internal table itab..
now my question is ...........is any other way to change 2nd select statement without using appending correspondin fields
but the functionality should remain the same as it is after changing..................
bcos appending corresponding is causing performance problem in data retrieval.
thanx alot in advance.
for sure points will be given for all the helpful answers
JackHi,
You can use like that:
select field1,.....fieldn
from <dbtable1>
into corresponding fields of table itab1
where <condition>.
select field1,...fieldn
from <dbtable2>
appending corresponding fields of table itab2
where <condition>.
now u use:
loop at itab2 into w_itab2.
read table itab1 into w_itab1 with key w_itab1-<primary field> = w_itab2-<Primary field>.
if sy-subrc = 0.
append w_final into i_final.
else continue.
endif.
endloop.
*i_final table having all data ( i.e itab2 & itab1 data)
Maybe you are looking for
-
Adobe Bridge / Aperture organization feature only comparison
I am curious what others' thoughts are about comparing Adobe Bridge / Version Cue to Aperture's pre-editing organizational features (meaning the ability to organize prior to doing any RAW conversion and editing). What do people see as the most import
-
Time taken by secondary TMUSREVT to remove dead entries
Background - We used to have a huge number of dead entries in our TMUSREVT.DAT (Tuxedo Version: 8.1.362), which were caused by timeouts on the WSL. These were never getting cleaned out and the file size kept growing. Based on the response to this tmu
-
Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g
Hi, We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12. But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior expe
-
I deleted itunes U and cant download other apps
i downloaded some videos on itunes U,but it was too slowly and i couldnt stop it,then i deleted itunes U.Since then,when i turn wifi on,it shows me i m still downloading the videos on itunes U.when i want to download other apps from app store it show
-
On starting up gives message "Well, this is embarrasing." can not clear.
When opening the web site I get a message "Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. You can try: * Removing one or more tabs that you think may be ca