Bypass the http authentication on router

Hi
how could i bypass the http authentication on router , i tried the below command but in vain
no ip http authentication local
thanks

Hello Bilal
Not sure I understand your question ? - The OP has asked can you connect to the http server without authentication.
I understand by that they are asking how to connect to the http server via port 80 (router that is) - so disabling authentication and http-secure-server(if enable) and defaulting to port 80 with let you connect .
By the way congratulations on your CCIE accreditation very well done - I believe your in your only early 20's as well - So a future quadruple CCIE maybe?
Exceptional achievement Bilal !
res
Paul

Similar Messages

How do we determine the HTTP authentication header for our hosted solution?

How do we determine the HTTP authentication header (adobeconnect_admin_httpauth) from our hosted solution? The documentation says to find it in a custom.ini file but I have no clue how to access that.
I need to supply that to the adobeconnect plugin used with a Moodle instance, screnshot below.
If it helps, when I click "Test Connection", I see the following output.
A series of tests have been run in order to determine whether the Adobe Connect Pro server has been properly setup for this integration to work and to also determine whether the user credentials provided in the activity global settings has the correct permissions to perform the neccessary tasks required by the activity module. If any of the tests below have failed, this activity module will not function properly.
For further assistance and documentation in how to set up your Adobe Connect Pro server please consult the MoodleDocs help page for this activity module Help page
Sending common-info call:
successfully obtained the session key: na11breezrirhb4f4ryf5shqy
successfully logged in as admin user
Testing retrevial of shared content, recording and meeting folders:
error obtaining shared content folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining forced-archives (meeting recordings) folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error obtaining meetings folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-shortcuts</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
error creating meeting testmeetingtest folder
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">sco-update</param><param name="type">meeting</param><param name="name">testmeetingtest</param><param name="folder-id"/><param name="date-begin">2015-03-14T06:53:39.000+00:00</param><param name="date-end">2015-03-14T07:53:39.000+00:00</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="invalid"><invalid field="folder-id" type="id" subcode="format"/></status></results>
error creating user testusertest
XML request:
<?xml version="1.0" encoding="UTF-8"?> <params><param name="action">principal-update</param><param name="first-name">testusertest</param><param name="last-name">testusertest</param><param name="login">[email protected]</param><param name="password">9B396EA828A00203FB3E8E69010FE537</param><param name="extlogin">[email protected]</param><param name="type">user</param><param name="send-email">false</param><param name="has-children">0</param><param name="email">[email protected]</param></params>
XML response:
<?xml version="1.0" encoding="utf-8"?> <results><status code="no-access" subcode="no-login"/></results>
What are we missing?
Thanks!

Here is the docuementation for loging in with an HTTP Headder Adobe Connect 9 * Log in from an application
Seeing as there may be some modification to files on the server, you may need to work with Adobe Support to see if they can be modified in the Hosted environment.Adobe Connect Help | Adobe Connect Support

The HTTP authentication test failed on activesync exchange 2010

`21

Testing HTTP Authentication Methods for URL https://xxxxxdyndns.biz/Microsoft-Server-ActiveSync/.
The HTTP authentication test failed
Additional Details
The Initial Anonymous HTTPS request didn't fail, but Anonymous isn't a supported authentication method for this scenario.
Elapsed Time: 670 ms

Sender SOAP bypassing the basic authentication

Hi All,
I'm doing a SOAP to RFC scenario. Inorder to remove the basic authentication for SOAP i'm using the
WSDL url like
http://host:port/XISOAPAdapter/MessageServlet?channel=service:channel&sap-client&sap-user=username&sap-password=password
but even after trying it this way its asking for the authentication.
I would like to know, if i've to append the username and password with the url while creating the webservice from the ID or is it just that after creating the webservice i've to apeend it when trying to access it.
We are using pi7.0 here . So is there any change while passing the username and password .
I knw tht this can be accomplished by editing the sda file , but thats not wat we want .
Any kind of suggestion will be helpful.
Thanks & Regards,
Rahul.

Hi,
This may help you
Check these words in this Blog
Prompt for Login credentials
When the above asp is executed in browser it prompts for User name/Password. We need to give valid username/password for XI. Until the recent patches by Microsoft there was a provision for providing login credentials directly in JavaScript (HTTP Connection).But for security risks this has been disabled in recent fixes. The Credentials need not be re-entered as long as session is not closed.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1442 [original link is broken]
Regards
Seshagiri

Is it possible bypass basic file authentication in glassfish using default

I have a glassfish application with basic authentication enabled and a single user setup in the file security realm wth a single group named 'internal'.
My web.xml is setup with an auth-constraint limited to 'internal' role, my glassfish-web.xml maps the group 'internal' to the role 'internal'
I have one cluster with an app ('api') running that is already accessed internally without the need for authentication.
I am trying to set up a standalone instance with a seperate config (publicapi) that runs the same app but can only access functionality of the publicapi rather than the api
My approach has been to add basic authentication to api with a default principal (internal) in its config. The principal is mapped to a user (internal) in the file security realm that has a single group in its list of 'internal'. My understanding was this would be able to bypass the basic authentication when using this config but it has not.
This is my config within the api project: glassfish-web.xml
<glassfish-web-app error-url="">
<class-loader delegate="true"/>
<jsp-config>
<property name="keepgenerated" value="true">
<description>Keep a copy of the generated servlet class' java code.</description>
</property>
</jsp-config>
<security-role-mapping>
<role-name>internal</role-name>
<group-name>internal</group-name>
<principal-name>internal</principal-name>
</security-role-mapping>
</glassfish-web-app>
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<security-constraint>
<display-name>Limit non-internal principals</display-name>
<web-resource-collection>
<web-resource-name>Secure Application</web-resource-name>
<url-pattern>/*</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>internal</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>Secure Area</realm-name>
</login-config>
<security-role>
<description>Only accssible to internal roles</description>
<role-name>internal</role-name>
</security-role>
</web-app>
and sun-web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 9.0 Servlet 2.5//EN" "http://www.sun.com/software/appserver/dtds/sun-web-app_2_5-0.dtd">
<sun-web-app error-url="">
<security-role-mapping>
<role-name>internal</role-name>
<group-name>internal</group-name>
<principal-name>internal</principal-name>
</security-role-mapping>
</sun-web-app>
So is my understanding of being able to bypass the basic authentication using glssfish default principal flawed? Do default principals match to a user / group list that is added in the Glassfish control panel and therefore assocated with the same roles / groups? Any other info on how to correctly map the default principal to a security group and bypass authentication would be very useful. Thank you

Haii
your jsps or struts will not do that kind of client side jobs..u write a java script and do that.......
regards
Shanu

HTTPS Authentication

Hi,
I am searching for a good design to implement the HTTPS authentication and data retrieval using BPEL process. Here is my uses case.
I have a csv file on a external server, this file requires authentication, the moment I click the link https://host.com/2009/03/12/Test.csv, it will ask us to enter the ID and password and upon user verification we can save or open the file.
Now I want to use an adapter or partner link in BPEL to read the file providing the user details. What would be the best approach to implement this. If any one has pointers please help me.
Thanks
Ramana.

Hi Ramana,
The whole bunch of the SSL(HTTP/S) and ecryption policies are well documented at : http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/security.htm
Also, since you want to make your application HTTPS enabled then you need to follow : http://download.oracle.com/docs/cd/B25221_04/core.1013/b25209/part4.htm#BEHBDFGD
Hope this helps!
Cheers
Anirudh Pucha
Edited by: Anirudh Pucha on Mar 11, 2009 7:02 PM

Embedding basic http authentication credentials in JNLP file

I want to embed basic http authentication credentials in the JNLP file.
Basically, I want the jars to be behind basic http authentication in order to distribute the application only to authorized users (I understand this is not strong security, but it's fine for my purposes) who are all on Windows, and once the java app is initially installed, I never want to have to enter the http login credentials again.
So I set up the http authentication and in the jnlp file I have:
<jnlp
spec="1.5*"
codebase="http://username:[email protected]"
href="program.jnlp">
This doesn't seem to phase the JWS authenticator. So on the first launch from the desktop shortcut I put the credentials in manually and select "save this password in my password list". It seems like I'm in the clear as the next time I launch the application from a desktop shortcut I am not asked for any credentials, but every time the Windows machine is restarted, I get the JWS authenticator again...the password is no longer saved.
Is there a way to embed the username/password in the JNLP file to get past the JWS authenticator without having to retype the username and password every time the machine is restarted? Or to permanently save the password in the JWS authenticator password list? Or any other way to set it up where once the application is initially installed, the http authentication credentials never have to be manually entered again?
Thanks!

Hi everybody,
I manage to do almost all (I suppose), but I need last help.
Through SM59 I created the HTTP Destination needed; then, I implemented the code given by SAP here:
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d053e74911d6b2e400508b6b8a93/content.htm
I ran the program, and it gives me the error: "Binder not found for soapAction = null.
I suppose that I should give the link to the soapAction, but I don't know where in the code.
Have you any idea?
Thanks and Regards,
Francesco

HTTP Authentication Methods

Testing HTTP Authentication Methods for URL https://mail.domain.co.nz/rpc/rpcproxy.dll?cl-cas01.domain.local:6002.
The HTTP authentication test failed.
Tell me more about this issue and how to resolve it
Additional Details
Not all the required authentication methods were found.
Methods Found: Negotiate
Methods Required: NTLM
Any ideas how to get around this with the exchange connectivity tester? If I change from negotiate to basic or ntlm, I then have issues with clients on the local network.

This link does not work. Could you update this post with the information that helped fix your issue? I am receiving the same error. Everything works internally. I have a casarray with 3 client access servers. If I try and connect using Outlook Anywhere externally,
all the tests pass except for the last one which states:
Testing HTTP Authentication Methods for URL https://casarray.mydomain.com/rpc/rpcproxy.dll?casarray.mydomain.com:6002.
The HTTP authentication test failed.
Additional Details
An HTTP 500 response was returned from Unknown.
HTTP Response Headers:
Content-Length: 3423
Cache-Control: private
Content-Type: text/html; charset=utf-8
Date: Tue, 03 Jun 2014 01:59:11 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 2135 ms.
Here is the full test:
Testing RPC/HTTP connectivity.
The RPC/HTTP test failed.
Additional Details
Elapsed Time: 10139 ms.
Test Steps
Attempting to resolve the host name casarray.mydomain.com in DNS.
The host name resolved successfully.
Additional Details
IP addresses returned: MyIpAddress
Elapsed Time: 262 ms.
Testing TCP port 443 on host casarray.mydomain.com to ensure it's listening and open.
The port was opened successfully.
Additional Details
Elapsed Time: 213 ms.
Testing the SSL certificate to make sure it's valid.
The certificate passed all validation requirements.
Additional Details
Elapsed Time: 1347 ms.
Test Steps
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server casarray.mydomain.com on port 443.
The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
Additional Details
Remote Certificate Subject: CN=casarray.mydomain.com, OU=Domain Control Validated - RapidSSL(R), OU=See www.rapidssl.com/resources/cps (c)14, OU=GT62161020, SERIALNUMBER=4/00u9cheL7q8Gq41IXnlvVd8mb8-rjb, Issuer: CN=RapidSSL CA, O="GeoTrust, Inc.", C=US.
Elapsed Time: 1260 ms.
Validating the certificate name.
The certificate name was validated successfully.
Additional Details
Host name casarray.mydomain.com was found in the Certificate Subject Common name.
Elapsed Time: 0 ms.
Certificate trust is being validated.
The certificate is trusted and all certificates are present in the chain.
Test Steps
The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=casarray.mydomain.com, OU=Domain Control Validated - RapidSSL(R), OU=See www.rapidssl.com/resources/cps (c)14, OU=GT62161020, SERIALNUMBER=4/00u9cheL7q8Gq41IXnlvVd8mb8-rjb.
One or more certificate chains were constructed successfully.
Additional Details
A total of 1 chains were built. The highest quality chain ends in root certificate CN=GeoTrust Global CA, O=GeoTrust Inc., C=US.
Elapsed Time: 32 ms.
Analyzing the certificate chains for compatibility problems with versions of Windows.
Potential compatibility problems were identified with some versions of Windows.
Additional Details
The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
Elapsed Time: 4 ms.
Testing the certificate date to confirm the certificate is valid.
Date validation passed. The certificate hasn't expired.
Additional Details
The certificate is valid. NotBefore = 5/6/2014 10:15:31 AM, NotAfter = 5/9/2015 5:16:00 PM
Elapsed Time: 0 ms.
Checking the IIS configuration for client certificate authentication.
Client certificate authentication wasn't detected.
Additional Details
Accept/Require Client Certificates isn't configured.
Elapsed Time: 6179 ms.
Testing HTTP Authentication Methods for URL https://casarray.mydomain.com/rpc/rpcproxy.dll?casarray.mydomain.com:6002.
The HTTP authentication test failed.
Additional Details
An HTTP 500 response was returned from Unknown.
HTTP Response Headers:
Content-Length: 3423
Cache-Control: private
Content-Type: text/html; charset=utf-8
Date: Tue, 03 Jun 2014 01:59:11 GMT
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Elapsed Time: 2135 ms.

UCM 11g web services with HTTP authentication

Is it possible to setup UCM 11g web services with HTTP authentication?
I did setup UCM 11g web services using OWSM policies and are working well.
But my development team wants to consume web services with only HTTP authentication (simple user name and password), do not want to use Keystore files and encryption.
Please help me guys.
Thank you in advance

Hi ,
If you are looking to use the WSDL to execute ucm services then use SoapUI IDE on development , there it requires only the http authentication method .
Let me know if this is the actual requirement which you were looking for or if I have missed the point .
I use this to quickly test WSDL and verify if the service being invoked is actually correct or not .
Thanks,
Srinath
Edited by: Srinath Menon on Apr 26, 2013 11:32 AM

HTTP authentication via reverse proxy

Hi,
I've taken a dig around the interface for the 4.0.4 web proxy and in the documentation but haven't come up with much so far.
What I want to do is configure a reverse proxy so that it feeds the HTTP authentication credentials into the server when we reverse from the proxy to it.
i.e.
user --> revproxy --> (http_details) --> webserver
The user wont enter these, they'll be somehow if possible, be configured into the reverse proxy so it knows what HTTP realm string to match to a target host and feed the credentials into it.
Is this possible?

Since it is just a matter of adding Authorization header, it is possible.
look around for other discussions for adding headers.

The HTTP request is unauthorized with client authentication scheme 'Ntlm'. The authentication header received from the server was 'NTLM'.

when i connect to wcf service , i am getting the client authentication error.
It happens only when i connect to wcf service from a client machine (virtual machine) that is logged in with local user account.
Wcf service is hosted as windows service in my case.
Client application is a windows application that connects using below security mode.
BasicHttpBinding httpbind = new BasicHttpBinding();
httpbind.Security.Mode = BasicHttpSecurityMode.TransportCredentialOnly;
httpbind.Security.Transport.ClientCredentialType = HttpClientCredentialType.Ntlm;
httpFactory.Credentials.Windows.AllowedImpersonationLevel
= System.Security.Principal.TokenImpersonationLevel.Impersonation;
Please help me with a solution.
As i read more through below link , i doubt if the client is not in the same domain, it might not work ? is it rite.
http://blogs.msdn.com/b/chiranth/archive/2013/09/21/ntlm-want-to-know-how-it-works.aspx
Regards Battech

https://msdn.microsoft.com/en-us/library/windows/desktop/aa378749%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
Well, you need to figure out what the authentication is supposed to be bettwen the WCF client and WCF service, because Windows Authentication is being rejected.

Autoscaling Application block for Azure worker role console app not working. Get error as The HTTP request was forbidden with client authentication

I have written a console application to test the WASABi(AutoScaling Application Block) for my worker role running in azure. The worker role processes the messages in the queue and I want to scale-up based on the queue length. I have configured and set the
constraints and reactive rules properly. I get the following error when I run this application.
[BEGIN DATA]{}
DateTime=2013-12-11T21:30:02.5731267Z
Autoscaling General Verbose: 1002 : Rule match.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","MatchingRules":[{"RuleName":"default","RuleDescription":"The default constraint rule","Targets":["AutoscalingWebRole","AutoscalingWorkerRole"]},{"RuleName":"ScaleUpOnHighWebRole","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnLowWebRole","RuleDescription":"Scale down the web role","Targets":[]},{"RuleName":"ScaleUpOnHighWorkerRole","RuleDescription":"Scale
up the worker role","Targets":[]},{"RuleName":"ScaleDownOnLowWorkerRole","RuleDescription":"Scale down the worker role","Targets":[]},{"RuleName":"ScaleUpOnQueueMessages","RuleDescription":"Scale
up the web role","Targets":[]},{"RuleName":"ScaleDownOnQueueMessages","RuleDescription":"Scale down the web role","Targets":[]}]}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling General Warning: 1004 : Undefined target.
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","TargetName":"AutoscalingWebRole"}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Verbose: 3001 : The current deployment configuration for a hosted service is about to be checked to determine if a change is required (for role scaling or changes to settings).
[BEGIN DATA]{"EvaluationId":"4f9f7cb0-fc0d-4276-826f-b6a5f3ea6801","HostedServiceDetails":{"Subscription":"psicloud","HostedService":"rmsazure","DeploymentSlot":"Staging"},"ScaleRequests":{"AutoscalingWorkerRole":{"Min":1,"Max":2,"AbsoluteDelta":0,"RelativeDelta":0,"MatchingRules":"default"}},"SettingChangeRequests":{}}
DateTime=2013-12-11T21:31:03.7516260Z
Autoscaling Updates Error: 3010 : Microsoft.Practices.EnterpriseLibrary.WindowsAzure.Autoscaling.ServiceManagement.ServiceManagementClientException: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure'
in subscription id 'af1e96ad-43aa-4d05-b3f1-0c9d752e6cbb' and deployment slot 'Staging'. ---> System.ServiceModel.Security.MessageSecurityException: The HTTP request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException:
The remote server returned an error: (403) Forbidden.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory`1 factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
If anyone know why I am getting this anonymous access violation error. My webrole is secured site but worker role not.
I appreciate any help.
Thanks,
ravi

Hello,
>>: The service configuration could not be retrieved from Windows Azure for hosted service with DNS prefix 'rmsazure' in subscription id **************
Base on error message, I guess your azure service didn't get your certificate and other instances didn't have certificate to auto scale. Please check your upload the certificate on your portal management. Also, you could refer to same thread via link(
http://stackoverflow.com/questions/12843401/azure-autoscaling-block-cannot-find-certificate ).
Hope it helps.
Any question or result, please let me know.
Thanks
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Performing Basic HTTP Authentication on the iPhone

Hi,
I need to perform a HTTP Request with Basic Authentication on the iPhone. To perform the request I use the NSURLConnection and NSMutableURLRequest. The request basically works but I can't get the authentication working. Is there a "convenient" way to do HTTP authentication or do I have to do it by hand?
Best regards,
Michael

Ok thanks - that explains it:
From the Apple article: "
Note: Touch ID cannot be used for purchases if Require Password in Settings > General > Restrictions is set to Immediately."
Not sure why - but clearly intentional.

Using Siri to open an App will bypass the Passcode/Fingerprint Authentication

I just used Siri to open an App on an iPhone 5s and it allowed me to bypass the passcode or fingerprint authentication and gain access to the iPhone. Is this a security flaw or do I need to set another option to prevent this? Certain apps require authentication, but so far, Flipboard and Youtube do not and they also allow full access to the iPhone without passcode or fingerprint. I have not tried this on another device with ios7.

One benefit is that using Siri to Open an app seems to be the quickest way to access the phone because the fingerprint scanner authenticates during the button push

OfficialFile.asmx The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'. ERROR

We are getting an error on the authentication piece when trying to submit a file to the OfficialFile.asmx web service to submit a document to the Drop-Off Library. Here is the code snippet -
public string FileUpload(HttpPostedFile FileInput, RecordsRepositoryProperty[] properties)
string strFileUrl = string.Empty;
RecordsRepositorySoapClient repository = new RecordsRepositorySoapClient();
BinaryReader b = new BinaryReader(FileInput.InputStream);
byte[] binData = b.ReadBytes(FileInput.ContentLength);
repository.ClientCredentials.Windows.ClientCredential = new System.Net.NetworkCredential(iUserID, iUserPassword, iUserDomain);
repository.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
repository.SubmitFile(binData, properties, null, FileInput.FileName, HttpContext.Current.User.Identity.Name);
strFileUrl = repository.GetFinalRoutingDestinationFolderUrl(properties, null, FileInput.FileName).Url;
return strFileUrl;
Although we are setting the network credential in the client call we still get the error
- The HTTP request is unauthorized with client authentication scheme 'Anonymous'. The authentication header received from the server was 'Negotiate,NTLM'.
Ideas?
Thanks in advance.

Hi,
Based on the error message, the issue is related to the authentication type.
I suggest you can specify the credential type like the below:
CredentialCache credentialCache = new CredentialCache();
NetworkCredential credentials = new NetworkCredential(UserName, PassWord, sDomain);
credentialCache.Add(new Uri(recordCenterUrl), "NTLM", credentials);
Here is a detailed code demo for your reference:
http://blogs.msdn.com/b/mcsnoiwb/archive/2011/06/06/sending-files-to-a-record-center-using-the-sp2010-webservice-officialfile-asmx.aspx
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

Bypass the http authentication on router

Similar Messages

Maybe you are looking for