C7-00 Camera Settings Do not open

hey techies out there,
i'm having problem since this morning with my camera settings dialog box, camera opens fine, even takes pictures, but when i go to options > settings, it hangs there for mere 2 seconds, and return back to my homescreen.
I have restarted my device thrice, but problem not solved, please help some1

What I want to do is to setup the camera and store the settings to the camera memory and do a flat-field calibration of the camera (and maybe also store the calibration image in the camera).
I will use your method to handle the default settings. Thanks!!!
Then I will remove the camera from the calibration setup and use it in a machine performing measurements not using LabVIEW. I could make all the setup in the machine again but that would mean more work than to use LabVIEWs functionality (I'm just lazy).
I just want to be sure that all settings have reached the camera memory and that they were stored there. It does not seem that the Property Node communicates directly with the camera like the "IMAQ1394 Write Registers" command does.
Richard

Similar Messages

TS4006 The camera shutter will not open and the camera screen is black front and rear ipod 4, tried force quit and reset, help?

The camera shutter will not open sometime and the camera screen is black. It seems to open as if were switching to the rear but that also appears black? i have force quit the app and hard/soft reset, help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past. The bridge no longer shows the picture view of my NEF files. These are Nikon NEF files from the Nikon 5100 DSLR camera. How do I fix this?

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past.
When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
Camera Raw plug-in | Supported cameras
The D5100 was first supported in Camera Raw version 6.4.
In Photoshop, click Help > Updates to update Camera Raw.

My iPod 4th Generation camera shutter will not open and i've restarted it and I have updated it, what should I do now?

PLEASE HELP ME! I've had this problem August last year and I don't know what to do. I really want to use my camera because it feels like a 3rd Generation one and I'm used to using the camera:L
Just please give as much information as possible!
btw, if you give me info where I have to restart it or update it.. dont bother because i've done that several times and nothing has happened! So please help!
Much Love

See this previous discussion. Not a good sign at all
.camera shutter will not open: Apple Support Communities

Nokia N8 camera settings is not saved

Hey.
I found out that all the camera settings is not saved. For exampel i always want the grid displayed but then i have to turn it on manuelly every time. Same goes for the timer, id like it to be on 2sec so the picture not is taken as you push the button (shaky etc).
Probably more camera settings that not saved havent checked it all.
Solved!
Go to Solution.

OK first of all look at this, 333 people viewed your original post and followed by 171, 144 and the last one that you responded 55 people viewed and yet your the only one with this problem lol
Here is the thing, I'm sure nokia had a damn good reason for not letting the grid option be set as default, and if you can't press two buttons to get to it, well that's your own fault for being lazy lol all these people viewed your post and not even one decided to say something, that's probably because no one really have a problem with what your complaining about and I don't count that new user since all her said was "No reply from Nokia on this???" hehe
anyways if nokia makes any changes in their camera setting and give us more options, well GREAT, but right now most people are happy with their N8 camera and its setting. Their are much more important issues regarding Nokia N8 and you picked the least important one lol way to go.
Don't forget that you can't compare the N8 with a digital camera, just because you can do things differently on a digital camera doesn't mean you suppose to do it on a camera phone. In my opinion the N8's setting is damn good, could get better and if nokia does something about it Great but I can do what I wanna do with the setting. So please try not to bring up any little problem you thing it has or you thing needs to be changed because I really don't think what you calling a problem is a problem
Nokia N80
Nokia N82
Nokia N97
Nokia N8 Dark Gray- RM-596

My iPad camera iris will not open?

My iPad camera iris will not open and camera will not function

Have you tried closing the Camera app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Just updated W10 TechPreview to Build 9860 - PC Settings are not opening but only docking to tool bar?

As PC Settings are not opening I'm not able to check for the newest build 9878 to download and upgrade. WHAT to do WHERE pls. ? WIN+C opens the charms bar where I'm still able to select Settings and then "Change PC Settings" BUT it only
docks on to the tool bar ....

Had a similar issue, fixed by running Dism /Online /Cleanup-Image /RestoreHealth
and reboot.
didn't mention it but it was docking to the taskbar. https://social.technet.microsoft.com/Forums/en-US/e3e1cc14-0b6f-4cbb-9a17-7051a434ebe0/app-does-not-support-the-contract-specified?forum=WinPreview2014General

Iphone 5 Camera Shutter will not open

I have an Iphone 5 and the camera shutter will not open, i will not work in any other camera app either. I can open and reopen it several times and then manage to click the front camera which does work fine. I have called Apple Support (which isnt helpful) as have to pay for them to run through troubleshoot with me!!! - I have not even had the phone for a year, anyone sorted this issue or have this issue?
I have tried all resets and again same problem!!
thank you

From experience you can try a restore but this usually would be resolved by hardware service. Seek service at your local "Genius Bar" if possible.
www.apple.com/retail

My ipad 2 camera shutter will not open

Help!! My Ipad2 camera shutter will not open. What should i do???

Quit the camera app completely and then try it again.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Try the camera app again.
If that doesn't work ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

My iphone 4s camera shutter will not open

My iphone 4s camera shutter will not open. tried resetting setting, tried turning off and on phone, tried closing the apps. any suggestions?

Have you tried rebooting your iPhone by pressing and holding both the Home and Sleep buttons at the same until the Apple symbol appears ignoring the power off slider?

Camera Roll will not open

Hello!.
The other day I took a picture of my dog, and after I took the picture the lense would not open back up. I tried turning off my phone but it wouldn't let me do ANYTHING, so I let it lock itself. I checked after it locked itself, and my camera would open; however, my camera Roll will not open. I tried taking a few pictures and it still won't open. In my camera, the picture in the bottom left if the last picture that I took and I can access the camera roll from there but it is the pictures i took before the one of my dog and they are all blurry!!
I've synced my phone several times, turned off my phone and everything. What do I need to do? HELP PLEASE!!!

fins1212,
There are a couple of things you can try.
1. Try to reset sync history:
-Go to Application
-Open isync
-Next to blue Apple (Top Left of screen) Click on iSync and go to preferences
-In Preferences click on Reset Sync History
Try to sync phone again.
2. If the above steps did not work try this.
-Go to applications
-Open Image Capture
-Next to Blue Apple, click on image capture
-Go to Preferences
-At the top of the page you will see - When a camera is connected: Open
-Make sure the drop down menu shows iPhoto
Hope that helps.

T530 Lenovo Integrated Camera not working, Lenovo Camera Settings does not Display

Hello, I have a new T530 with Windows 8 OS. I am having trouble using the integrated camera. It functions neither in the Windows camera app nor in Skype. In both cases I get a picture with a gray background and a camera with a line through it. In Device manager, the camera does appear, is enabled, and the drivers are up to date.
After looking through other threads, I tried checking whether the camera was plugged in and indeed it was. When using Skype and I set the camera to on (Skype did detect the camera), I still got the gray no camera image, but the green light on the camera itself turned on.
I also tried using Fn+F6 to check settings. Lenovo settings opens, but the when I click the camera settings Icon, the screen loads a blank page that says "Camera" in the top right and has a back button (left pointing arrow) in the top left hand corner. The back button does not seem to work and I must change the window to something else in order to exit/close settings.
I tried manually installing both camera drivers and "power management" ("energy management"?) drivers. Neither of this solved either of these issues.
Please help me to resolve this problem. Thank you.

Hi, euterpenc
I would make sure that the BIOS is up to date in the system. The current BIOS for your system is 2.07 and can be found here. Also, I would ensure that the chipset drivers are up to date, and those can be found here.
Hope it helps, and let me know how it goes
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

CS4 Camera Raw Does Not Open With Lightroom 3

Hi everybody,
I have the following equipment:
iMac OSX 10.7 Lion
Photoshop CS4
Lightroom 3.6
Camera Raw 5.7
All SW has the latest Patch.
When I open a Canon CR2 out of PS, the Camera Raw plugin shows up and I can make my settings.
When I try to right-click from LR, the window does not open. The file is opened but no CR-plugin.
It used to work on my iMac with SnowLeopard.
Can anybody help me?
Thank you for your time.
Ole

ACR should never visibly open going from LR to PS. This is by design.
Because your LR and CS/ACR are mismatched versions, LR will have to render to a TIF on the way into PS, so there’s no ACR involved. If you were using matched versions of LR and PS, either LR2/CS4 or LR3/CS5 (or now LR4/CS6) then ACR is called on the way into PS but without your seeing the user-interface. The adjustments available in LR3 are “newer” than the adjustments available in CS4/ACR5 so it doesn’t even make sense you’d want to see the sliders in ACR on the way into PS, because they’d be undoing or changing something LR had done unless you mean you want to adjust the intermediate TIF file using the older ACR sliders for some reason.

Newest iTouch - the camera function does not open. Any fixes ?

Used my iTouch camera yesterday.
Today it will not open. I just get a dark blue screen. The photo library works fine.
Anybody have any ideas ?
How long does Apple warranty them ?

- Usually resetting the iPod resolves that problem and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- If not successful, then restore the iPod. First from backup and then if necessary, restore to factory settings/new iPod.

Nikon camera RAW will not open in PS CS3 on Win 8

I have photoshop CS3 extended ver 10 and Elements 6. I installed both on a new PC with windows 8. PS will not open my RAW files taken with my Nikon D40X although Elements will. PS opens tiff and jpeg. I went to Adobe updates and tried to install ACR 4.6 (Camera raw 8bi.) The Error message for bothe the opening RAW files and installing the update is, "Could not complete your request because it is not the right type of document." I uninstalled PS and Elements and reinstalled just PS. Same problems. I transfer the RAW files from my camera to computer by copying them through a card reader.
Thanks for any help.

PS and PSE each have a different place to put the .8bi file, so manually do the updated according to the instructions for each product on this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Re-installing PS or PSE will revert the ACR plug-in for that software back to the oldest version that originally came with that version of software so you’ll need to update using the contents of the ZIP file, again.
You can do a Help / About Plug-in… / Camera Raw… in PSE and PS to see what version you have installed in each. Plug-ins are scanned at startup, so you’ll want to restart each product after doing the manual install.

C7-00 Camera Settings Do not open

Similar Messages

Maybe you are looking for