C903 error with Date & Time
Hi all,
First time posting here.
I have a S.E. C903, which has been great but recently developed a fault with the calender/date & time settings. Basically it wont let me set them to the correct time, wvery time I re-set it, it wont save. Ive tried taking the battery out & leaving it for a while, when I power on asks me to set it but wont save. I've tried resetting to factory defaults with the same results. software version is up to date (1214-617 5R1EA032 090501). Any ideas anyone?
Solved!
Go to Solution.
You can try updating or re-installing the software using the SE update service on your PC.
Similar Messages
-
Output triggred in the invoice with Date/Time 1
Output triggred in the invoice with Date/Time as 1 i e Send with periodically scheduled job.
So could you let me know when this gets triggeed if we maintain 1 in condition record?
Thanks,
PraveenHi Praveen,
When you maintain 1in the Date/Time column in the Condition Records for O/P of say the Invoice it means that you are telling the system to send the O/P with periodically scheduled job.
To achieve this you must use the report program RSNAST00.The message is processed through report program RSNAST00. This report program can be scheduled periodically or started manually.
For scheduling periodically you need to set up a batch process in SM35.
Hope this helps,
J Nagesh -
How to copy Log text (with Date, Time stamp ) User IDfrom BP to Transaction
Hi Experts,
Can someone guide us how to copy Log text (with Date ,Time & User ID) fron Business partner (Prospect) to transactions by text detrmination procedure.
Regards,
Basavaraj Patilsave text
Fill out following parameters of SAVE_TEXT function module:
HEADER
TDOBJECT C 10 BUT000
TDNAME C 70 10 digit BP number
TDID C 4 Z001
TDSPRAS C 1 Language
INSERT = X
LINES
TDFORMAT TDLINE
|
|testtttttttttttttttttttttttt( Your text)
I would suggest you to use some other BAPI that would attach your text to BP than SAVE_TEXT.
If you still wanted to use SAVE_TEXT then first make sure how the TDNAME is generated. It depends on the text determination procedure. For examples, it can be guid of BP, GUID followed by date or time or else the BP number itself.
Just go to BP transaction, double click on the text pad, it will open you the SAP Script editor. Click on menu GOTO and select Header which will give you info about your TDID, TDOBJECT, TDNAME....
Hope this helps. -
Can some one HELP me , I keep getting this error with my Time Machine Back up, "The backup disk image “/Volumes/JKPN Safe/JKPN IMAC.sparsebundle” is already in use.
See > http://pondini.org/TM/C12.html
-
With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please??? -
I am trying to create a process to import to import data using a date variable but when I use the date to get the data from SQL server I am getting a error.
I have tried setting the variable as both a string and date - Select
CONVERT(varchar(10), DATEADD(day, -1, GETDATE()), 101) and map it to the Variable. The date variable is working. It’s correct in the Watch and I am able to use the variable to get data from an Open Link database (row_date = ?)
in the OLE DB Source query. I get a "Invalid character value for cast specification"
error when doing the same thing to get data from an SQL Server OLE DB Source
where the date field is DateTime (row_date = ?). I have tried making the variable as a date and string but get the same error regardless. To make it work, I have to duplicate the date
calculation in the query - HAVING (row_date = CONVERT(varchar(10), DATEADD(day, -1, GETDATE()), 101) ) which works fine.
HAVING (row_date = ?) gives the error with the Parameter mapped to the variable.
Any suggestions as to how to make this work correctly?May I suggest to use style 111 instead of 101?
From experience, yyyy/mm/dd date format will work most of the time for date conversion and
It's due to different date format from mm/dd/yyyy to the system date format that SQL Server is using.
Hope this helps.
~ J. -
Sql command not working with date time??
I am using my own sql query to fetch data in the sql command.
Due to the problem I found - here is the basic example:
The sql is:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss')) minu from dual
But I am not getting anything in Crystal Report tool!!
In any sql tool I get results.
When I am not using time part (hh24:mi:ss) :
select to_number(to_date('10/11/2011','dd/mm/yyyy') - to_date('09/11/2011','dd/mm/yyyy')) minu
from dual
I am getting data!!!!
What is the problem??
Initially I had it with parameters of type 'Date Time'
Please, any one knows what the problem is?Hi,
Sorry for the delay and thanks for answering.
It was partial solution
Moving to oracle driver, not (OLE DB), this specific one worked fine:
select to_number(to_date('10/11/2011 10:23:00','dd/mm/yyyy hh24:mi:ss') - to_date('10/11/2011 10:20:00','dd/mm/yyyy hh24:mi:ss'))*100 minu from dual
BUT
When I tried to change one of the hardcoded values to be parameter of type 'Date Time' I couldn't pass the validation step - mostly the errors:
"ORA 00900 Invalid sql statment" and
"ORA - 00907: Missing right parnthesis"
No matter which format I used.
Last version is:
select to_date('{?tsStartReport}','yyyy-mm-dd hh24:mi:ss') from dual
Any idea why 'Date Time; is so problematic? How can I workaround it? -
Problem with Date & Time Auto Update
Hi everyone,
I have been experiencing a date & time issue with my MacBook Air. (I am running 10.5.5 with all the latest software updates except for iTunes 8). Here's what's going on:
Under the Date & Time preferences, whenever I try to check the box for "Set date & time automatically", the date and time do not update. I thought Norton might be the culprit in this case, but I have thoroughly uninstalled it, and this problem still persists. (I am actually borrowing this laptop for work, so I don't know if someone else possibly did something weird to it before I started using it. As far as I can remember, I've always had this problem -- the automatic setting has never worked.)
I am connected to the internet when I do this, and I already have my time zone selected. Am I missing something obvious here?
I apologize if this issue has been brought up before, but I did a lot of searching and couldn't find anything. Any suggestions would be greatly appreciated!!
Thank you.whenever I try to check the box for "Set date & time automatically"
You check it and the time does not update, or you try to check it and it doesn't show a little tick mark?
Try it with Console.app open and see does it report any errors. Try changing the time server.
AK -
ESS Timesheet error with Clock Times
Hi everyone,
Has anyone seen this issue? (ERP 6.0, EP 7):
Timesheet data entry profile is configured 'With Clock Times' and WITHOUT 'Release on Saving'. On the daily view of the timesheet, when clock times are entered and Refresh or Review is depressed, the number of hours is populated and the following error displays:
"Number of hours not valid when Start Time and End Time are entered"
This only displays:
- when the profile is configured without 'Release on Saving' checked. When it IS checked, the error goes away.
- from the daily view (no clock times on the Weekly View)
- in the portal timesheet, not via CAT2 in ECC
Any suggestions?
Thanks!
Message was edited by:
Frederic Wood<u>Without checking 'Release on saving':</u> The system checks the number of hours value with the corresponding hours mentioned in IT0007.
<u>On checking 'Release on saving':</u> It overwrites the number of hours stored in IT0007 in the back end system.
This happens because this option has dependency with 'With Clock times' option. For this option, the system automatically deducts unpaid breaks, as determined in the employees's work schedule, when calculating the number of hours.
If this helps, pl do reward.
Thanks
Narasimha -
Version PDF with date/time
I need to archive my completed forms with a date/time stamp. How do I do that in Workbench?
I'm using the Write Document service. In the Input I put the name/location of the pdf in the Pathname Pattern
and check Make Unique. When I try to use Xpath and add date/time to either Pathname Pattern or Make Unique
my form gets Stalled with the error of "Not able to overwrite pdf".Try with the following options.
It worked for me.
you might want to make sure that the file you write is valid for.e.g
concat("c:\eForms\CD\CDPaymentMaint.pdf",add-days-to-date(/process_data/@strDate1, days))
make sure that the variables have values.
strDate1 should be a valid value, and days should be a valid number.
i tried and found the result. -
Idoc- File with date+time stamp, getting overwritten
Hi,
I have a scenario where in am writing Idocs from R3 to a Txt File in 3rd party system.
For an instance upon running a Tx, am generating 3 idocs. I need all these 3 idocs to be written to a single file. Hence for the file naming i have used "CREDAT_CRETIM.txt" from EDI_DC40(all idocs carry same date+time).
I have configured the file mode as Create -> using Temporary fileschema of "Ord.xfr". I need this for locking before FTP to the 3rd party system.
If i check the OVER WRITE EXISTING FILE checkbox, i get only the last idoc written to the file(overwriting previous 2 idocs).
If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.hi BRamchan,
>>>><i>If i Uncheck the OVER WRITE EXISTING FILE checkbox, i get only the first idoc written to the file(other 2 idocs are not written) they are shown successful in MONI.</i>
If you can see in moni successfully process, look in the RWB communication channel monitoring of the receiving channel, there you might find error.
regards
Ramesh P -
How to compare Date in the TextField or DateTime with Date/Time field?
Hi All,
I am facing an issue with respect Date comparinson. I tried to look into entire discussions but failed to get the answer.
My issue is: I wanted to comparet Date/time field value with Date value which is in TextField.
The functionality of my form is:
I have dropdown list which lists the registered customer ids binded to XML Datasource. On selection of the customer id from the dropdown I am displaying customer registration date in the TextField or say Date/Time field as below code in dropdown change event.
RegistrationDetails.PurchaseEntry.txtRegDate.rawValue = regDataNode.CREATION_DATE.value; (this is TextField control)
In form I have an Date/Time field in which use will select the date of item purchase. In the validation part I want to make sure that, the purchase date selected in Date/Time field must be greater than the Customer Registraiton Date. I able to compare if the customer selects the date from two different Date/Time fields. But how to compare the dates which one is in Date/Time field and Date is in TextField?
I have tried using Num2Date and Date2Num with "YYYY-MM-DD" format to compare but not succeed!
Can you guys help me in this? Thanks in advance
Regards.Hi,
Yes, I am able to display the date which I have assigned to the text box. In the message box it show the value as '31/05/2009', since in this format i am assigining the date in the text box.
Here is the code which I am assigning the value:
RegistrationDetails.PurchaseEntry.txtRegDate.rawValue = regDataNode.CREATION_DATE.value;
Do I need to change the format while assigning value in text box?
You have told that, you have attached your test form, nothing is the reply. Can you repost the file?
Regards. -
Using the regex to match the file name with date time
Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it. However in the current application i need to parse the file name and get the current date time to check if it is matched. Does anyone have good idea?
{code}
testfile10-08-09-2008-08-21-04-24-0443.zip
testfile11-08-09-2008-08-22-04-24-0441.zip
{code}
thanks in advanced!lauehuang wrote:
Hello all,
currently I had problem to match the following file name with the date time. Of course I can use this regex like ""(\\\\w+|.+).(zip)" to match it.That regex doesn't make a lot of sense:
- with "\\\\w" you probably meant "\\w";
- "\\w+|.+" doesn't make sense: you can simply do ".+" in that case;
- ".(zip)" will also match the string "%zip" or "Ezip".
However in the current application i need to parse the file name and get the current date time to check if it is matched. I don't know what you mean by that. -
Creating a spool file with date/time appended to file name
In Oracle Sql*Plus, I want to spool out a file, with the date-time stamp as part of the file name. Any idea how to do this?
Here's what I have right now:
SQL>
set serveroutput on size 200000;
rem
rem $OFSA is a UNIX alias so sql plus is talking to UNIX
rem
spool $OFSA/logs/OFSAP/common_coa_id.log;
prompt 'Enter date in mmddyyyy format, without quotes';
exec upd_common_coa_id_driver ('&date_mmddyyyy');
spool off;
As an example, I'd like to have a file with this name: common_coa_id083002.log
Thanks.In SQL*Plus this is what you can do to get the current date/time as part of the spool file:
============================================================================================
SQL> column tm new_value file_time noprint
SQL> select to_char(sysdate, 'YYYYMMDD') tm from dual ;
1 row selected.
SQL> prompt &file_time
20020816
SQL> spool C:\Temp\logfile_id&file_time..log
. /* put your code here */
. /* it will go to a file called C:\Temp\logfile_id20020816.log */
SQL> spool off
SQL> -
Report data binding error with date values
I have CF7.02 with a Microsoft Visual FoxPro 9.0 SP1 Database
that I connect to using ODBC (FoxPro Driver 6.01.8630.01). I send
my sql results to a CF Report Builder 7.02 PDF report and it works
fine. If I dump the date values before I change them, they look
like the following: {ts '2004-12-20 00:00:00'} . However I have
tried a number of ways of manipulating the date before sending it
to the report, but I continue to get errors. I don't care what
format they go to the report in, since the report reformats them
anyway. I checked to make sure that none of the dates were null.
For example <cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) /> yields values in the
{ts '2004-12-20 00:00:00'} format when I dump the query results to
screen. Where:
ldCFPrcInputDate = 12/20/2004
CreateODBCDateTime(ldCFPrcInputDate) = {ts '2004-12-20
00:00:00'}
ReportQuery.PrcInputDate[lcCurRow] = {ts '2004-12-20
00:00:00'}
I get the error:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
coldfusion.runtime.OleDateTime -> Date
Not using the CreateODBCDate function for example <cfset
ReportQuery.PrcInputDate[lcCurRow] = #ldCFPrcInputDate# /> I
get:
Report data binding error Unable to get value for field
'prcinputdate' of class 'java.util.Date'.
java.lang.String -> Date
Here are some of my failed attempts:
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDateTime(#ldCFPrcInputDate#) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
#ldCFPrcInputDate# />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
DateFormat(CreateODBCDate(#ldCFPrcInputDate#),'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm/dd/yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(DateFormat(#ldCFPrcInputDate#,'mm-dd-yyyy') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
Trim(createODBCDateTime(ldtmpdate)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate({05-07-2006}) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('{05-07-2006}') />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(05/07/2006) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate('05/07/2006')/>
<cfset ReportQuery.PrcInputDate[lcCurRow] =
CreateODBCDate(parseDateTime('05/07/2006')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime(05/07/2006)) />
<cfset ReportQuery.PrcInputDate[lcCurRow] =
parseDateTime(CreateODBCDateTime('#ldCFPrcInputDate#')) />
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05-07-2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '{05/07/2006}'
/>
<cfset ReportQuery.PrcInputDate[lcCurRow] = '05/07/2006'
/>
I also did some googling without success. Any help is
appreciated.You may want to make sure that the column is not included in
the query variable list in your report cfr file.
The newest version of the Report Builder, which may be
installed on the server, no longer tolerates vars appearing in that
list of they are not in the query itselft.
Maybe you are looking for
-
I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app o
-
How to create a Parameter with LOV
Hello All, I am having the follwoing custom query. SELECT concatenated_segments, (SUM(PERIOD_NET_DR)-SUM(PERIOD_NET_CR)) MOVEMENT FROM gl_balances a, gl_code_combinations_kfv b where period_name='Apr-08' and a.code_combination_id = b.code_combination
-
Carry our Sourcing link not present in EP for SRM 7.0
Hi We are using SRM 7.0. When we create a Shopping Cart then as per the configurations made it should be present in Purchaser's Sourcing cockpit for further action. However when we log in as Purchaser we do not see the "Carry Out Sourcing" link at al
-
Podcasting with iweb and itunes.
Trying to get set up to podcast some of our programs and not having any luck. We have an iweb site and when we are prompted to type in the feed URL , would that be our iweb sites URL? it comes back with cant read and invalid. What are we doing wrong?
-
Adding a calendar to Calendar app
I was wondering how to "add" a calendar to the calendar app on iPad and iPhone 4. Also how to change event colors?