CA Wily Interoscope Issue...No Dashboards Available

Hi experts.
We have installed Wily Interscope and configured it with our SOLMAN so that it can collect our Portal's Java Performance Data. But when I login to the Willy Website (using the URL...http://<SOLMAN HOST>:8081/webview/jsp/login.jsf;jsessionid=1om5nncjj8t73), and click on CONSOLE, I find a message...."No Dashboards are Available". Hence, no data is shown.
All settings are in place, ports okay, but not able to figure out where is the problem.
Do I need to create a dashboard? If yes, please provide the staeps to do it.
Very jeoperdized,
Avishek

Hi SM,
Can you please elaborate what do you mean by Portal Data Collection configration?
I don't have much knowledge in Portal, so if you can help me with any info it would be great. If possible, please send me a link where I can refer the same.
Anyways, thanks a lot for your response.
Thanks,
Avishek

Similar Messages

  • Making Primavera P6 reports and dashboards available to a portal

    Has anybody any experience with making Primavera P6 reports and dashboards available through a portal?

    The My Reports portlet enables you to add an unlimited number of reports created in the Project Management module to the portlet. Once added, you can schedule reports to run at specific time intervals, and then view reports in HTML format or in Excel.
    Tip: The "No data available" message is displayed when you have not added any reports to the portlet.
    You can schedule recurring reports that run periodically at a certain date, or you can schedule a report to run once. When you schedule a report, the portlet submits the job request to the Primavera Job Service. The Job Service processes the request at the scheduled time and runs the report. Keep in mind that the Job Service runs the reports by logging in as the user who schedules the report. Thus, user security and access settings always apply, and the same report might not return the same data for users with different privileges.
    Tip: To schedule reports, you must have the required security privilege and you must also have the Primavera Job Service installed and configured for the database you are using
    If you have any further questions please contact support at http://primavera.com/customer/support.asp.
    Sincerely,
    Saryn Perrone

  • Proposed goods issue date, material availability date

    Dear All,
    where to configure the goods issue date & material availability date.
    regards,
    Murugan

    Hi,
    For determining the dates, you have to put the availability checking group in the Salesorg/plant view of material master.
    After that you have to put the number of days(planned delivery time,GR processing time) in the MRP2 view
    of material master and if the stock is not availble then the system will determine dates based on these number of days.
    You can also select the default delivery date by putting the number of days in the configuration of sales document type VOV8.
    Reward points if it helps.
    Regards
    Karan

  • CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer

    Hi Folks,
    I am in urgent need of the configuration guide of SolMan 4.0.
    as I want to implement CHaRM, TMS, Monitoring using WILY Interoscope, Maintenance Optimizer.
    Also clearify the below mention doubts.
    Scenario:
    SAP is already implemented and Sol Man 4.0 is also installed.
    We have 6 landscape of XI, BI, APO, CRM, SRM, HR, EP.
    Also TMS is configured already for each and every system.
    Doubts:
    1. Can we do transport managment by using SolMan while we dont want to implement CHaRM.
    2. Do we have to define the TMS again in the SolMan  including routes and TDC or just we have to add the satellite systems with Sol Man.
    3. What would be the detail steps for this.
    Mail me docs at [email protected]
    Thanks in advance.
    Regards,
    Akshay

    Akshay Shail wrote:>
    > I am from SAP Partener company. Do we have to pay any thing to get RKT PDFs.
    >
    > I would be very thankful of u if u will forward me PDFs at [email protected]
    Hi Akshay,
    as a registered SAP Partner, you should have access to
    [SAP Support Portal - http://www.service.sap.com/support |http://www.service.sap.com/support]
    Here you find all learning material from Ramp-Up Knowledge Transfer (RKT) for SAP Solution Manager 4.0.
    [Ramp-Up Knowledge Transfer - SAP Solution Manager - http://www.service.sap.com/rkt-solman|http://www.service.sap.com/rkt-solman]
    The documents PDFs, SAP Tutor sessions, ... may not be distributed or forwarded to you via E-Mail.
    Best regards,
    Ruediger

  • There's no music in my device (ipod touch) after restoring content because of a software issue. music is available in my laptop's cloud though. how do i restore music in my device?

    there's no music in my device (ipod touch) after restoring content because of a software issue. music is available in my laptop's cloud though. how do i restore music in my device?

    hi! an error message showed on my device last week and Apple support  helped me restore the software on my device. Syncing went well and all my apps were available after. However, when I looked at my music in my device, it did not contain anything. The songs were in Itunes on my laptop and when I tried to play them they did not play. But, it says music is available for my account in the cloud. When I switched to the cloud, I was able to play my music already. But everytime I synced, the music from the cloud are not transferred to my device. Most of the music that I have are from other sources. How do I download those again to my device? I tried what I did before which was to copy the song from my laptop then edit paste it to iTunes but this did not work like before when automatically it becomes available on my device.
    pls help. thanks!

  • Prompts issue in Dashboards

    Hi All
    We have an issue in Dashboards.
    We have five dashboards for Project Accounting module.
    For all the five dashboards we have five different prompts. For couple of prompts we have selected default values and this varies from one dashboard prompt to the other.
    Now the issue is , when the user navigates from one dashboard to the other , assuming from 1st to 2nd , the 2nd dashboard prompt is taking the 1st dashboard prompt values as default even though that is not what we have selected as default value. Why is this happening?
    Ex: Freeze Month is the dashboard prompt and we have two values "20-FEB-2012" , "15-MAR-2012" as values.
    1) For 1st dashboard both the values has been selected as default values for the user.
    2) For 2nd dashboard only "15-MAR-2012" has been set as default value.
    However when user navigates to the 2nd dashboard , the 1st dashboard values are appearing as default which shouldnt happen.
    Hope my explanation is clear , can somebody help me on this.
    Regds
    Mano

    Try to duplicate the filter columns(at rpd) for each dashboard and see. In that case the values will not be passed from one dashboard to another. for eg. Freeze Month_Dash1, Freeze_Month_Dash2, etc.

  • Prompting issues on dashboard pages

    I have a 3 page dashboard that conform to a form of hierarchy
    -- Page one summarises the highest level of date by month (based on a dashboard prompt)
    -- Page two shows the middle level of data based on a prompt from Page one
    -- Page three shows the lowest level of data based on a prompt from Page two
    For example:
    Page 1 shows Car sales by Maker (Ford, Chrysler VW etc), clicking on one of these will take you to Page 2 which shows the sales per Model (Focus, Fusion, Taurus etc) and clicking on one of these will take you to Page 3 which shows the sales by Package (S, SE, SES, SEL etc).
    This all seems to work fine, the date selected on Page 1 is passed to the other pages. The problem arises when I go back to Page 1 after drilling-down to either Page 2 or 3. Returning to Page 1 after this means that the chart & table there only shows data for the Maker for the Model and Package selected on Pages 2 & 3.
    The only prompted field on Page 1 is the "month" field that takes its prompt from the dashboard prompt, I can't see why this is picking up selections from the drill-down & not just returning the full data set. Can anyone help?
    Edited by: user8090364 on Apr 14, 2009 3:19 AM
    Hmmm, further Googling suggests it may be an issue with Dashboard Page State Persistence in config.xml. Has anyone else come across this?

    Hi John
    They're column based & each page has a seperate report. I hadn't protected the filters on the top level report - I have now & that seems to have sorted it.
    Thank you, that was really bugging me. We're still in UAT & all these little niggles that aren't in the manuials are cropping up.
    regs
    Neil

  • Performance Issue in Dashboard using SAP BW NetWeaver Connection

    HI Experts ,
    We developed Dashboard which is based on BW Queries, However it is taking considerable amount time while executing.
    We are  using BO Dashboard SP2 version ,BO 4.1 and BI system 7.01 .
    We are  looking for few clarifications on SAP BO Xcelsius Dashboards.
    Though we know limitations on component number and data volumes which could badly affect performance of the dashboard, We do have a requirement to handle huge data volumes and multiple components. Our source data lies in SAP BI system and we are using BICS connectivity/ Webi with QAAWS for updating data in BO dashboard .
    Our requirement is too complex where we should be in a position to meet user expectations for complete view 75 KPI’s in a single Dashboard.
    We have scenarios like YTD ,QTD and MTD other complex calculations in Bex Query.
    Here are my questions,
    Is there any way to provide complete functionality using large data sets to the users with the current architecture without any performance issues?
    Are there any third party tools which can be used with BO Dashboard for the performance improvement and handling huge volumes?
    Do you suggest any alternate solution for complete functionality?
    Many thanks for your inputs in advance!
    Regards
    Venkat

    Hi Rajesh,
    Thank you so much for your response.
    I have tried the way you suggested. But here my issue is , I have a prompt in my webi report based on months selection and it is a single valued prompt.
    so I was able to schedule my report only for one month;whereas my dashboard needs to show values for one year data based on the months the user will select in the dashboard.
    Though i use the WebI instance data in the dashboard , i getting only one month value, also I am not able to associate the selected month for the WebI instance in dashboard.
    Is there any option to schedule webI report for different months and the dashboard has to pick the 12 months instance and the combo box selection in the dashboard must associate with it??
    Please help me with your thoughts.

  • Issue in Dashboard Prompt of OBIEE 11g

    Hi,
    I had recently migrated from OBIEE 10g to OBIEE 11g.
    I had found that there are lot of things which were working on OBIEE 10g are not working in OBIEE 11g.
    For Eg:
    I have scenario where i have 2 dashboards with different dashboard prompts.
    - *1st Dashboard*: I have prompt with 4 columns Year, Month, Qtr and Week. I can filter the data based on the selection of prompt.i.e Summary Report showing all KPIs and when clicked on the any of the KPI it goes to Below report which shows the graphical view of past weeks data.
    - Report: Here i show all the week Ids in the Graph format and when clicked on the any week id it navigates to 2nd Dashboard(below) with appropriate week populated in the prompt and show the detailed records.
    - *2nd Dashboard*: I have prompt with 5 columns Year, Month, Qtr, Week and Day of the Week with some detailed report. Here the only Week Id should be pre populated and show data based on the week id selection in the above report.
    The issue here in OBIEE 11g is, The month Id which was selected in 1st Dashboard prompt is also getting pre populated into the 2nd dashboard prompt. Which should not happen.
    Note: This was working fine in OBIEE 10g.
    Is there any way to fix this issue in OBIEE 11g.
    Regards
    Shyam
    Edited by: user9954342 on Dec 23, 2010 2:01 AM

    Hi Bala,
    Thank you for your response.
    I had tried that and resolved my problem but it was impacting other reports i.e
    I have other reports in 1st Dashboard with different tabs, Here i want the prompt value to be persisted across the reports in same dashboard so that when i go to other tab with in same dashboard the prompt value should be pre-populated and the data should be filtered against that.
    Now if i change the scope to page then i will be loosing this functionality.
    It was working on OBIEE 10g and i lost this after migrating to OBIEE 11g.
    Can you please help me in this regard.
    Regards
    Shyam

  • Issue with offline availability of roaming profiles in Server 2012

    I've recently stood up a Windows 2012 R2 server. I set up folder redirection using the guidelines
    here and roaming profiles using Group Policy. All is well except for the fact that if the client is physically disconnected from the network then the profile isn't available.
    I've set up folder redirection/roaming profiles on many different version of Windows Server and this is the first time I can remember that the files weren't available offline without further intervention from me. Is there some new setting or default on 2012
    R2 that I'm running afoul of?
    I note the following screen on the share properties but don't want to go at it until I know more
    Location of image in case of no display
    Sunt ludi et ioci dum aliquis oculo nocet.

    Shaon,
    No problem at all, I'm delighted that someone is answering at all! :-)
    The answers to your points/questions are as follows:
    1. The issue persists after a reboot
    2. All computers in the OU are experiencing this issue along with all users affected by these group policy items
    3. There is only one group policy applied here and in relation to the three items you've mentioned:
    Action on server disconnect [Not configured]
    Non-default server disconnect actions [Not configured]
    Do not automatically make redirected folders available offline [Not visible]
    All the relevant group policy objects (on the server) are at their default "Not configured" value. I've filtered by Windows 7 and Windows 8 as I have nothing below that. I've checked both locations viz.:
    Computer Configuration\Policies\Administrative Templates\Network\Offline Files
    User Configuration\Policies\Administrative Templates\Network\Offline Files
    The same is true for Local Computer Policy, all are set to "Not configured". In Explorer on the client under the Easy Access option all of the salient settings are greyed out.
    - Derek
    Sunt ludi et ioci dum aliquis oculo nocet.

  • Issue with Dashboard customization in OBIEE 11G

    Hi All,
    I have a dashboard page with 1 prompt and 4 sections. My need is to show all sections minimized when a user logs in to the analytics. So as a Admin I have minimized all sections and saved the customization for others as Default customization.
    Now the problem is I have column called Month in my Prompt, which is a Multi select column, for this column I made to select few values by default using SQL results option, which basically selects all months less than current month, for example current month is Jan'13 so values till Dec'12 month will be checked by default. Since we have saved customization, the month column is not getting refreshed , for example when I login to analytics on Feb'13 , the data is still checked till Dec'12, which ideally should also include Jan'13 as well.
    Anyone please advise on this issue.
    Thanks,
    GJ

    Hi,
    I used this method with success in a number of dashboards, it should work also in your case.
    I defined the dashboard prompt to have column values defaulted in some way (by means of specifying explicit values, using SQL results or variables, etc - the method does not matter).
    I built the dashboard page including prompt and analyses.
    Then I run the dashboard page and, without doing anything other, I collapsed the sections I wanted to start as closed and saved as shared customization.
    It does work fine in my case, the prompt works as specified.
    Hope this helps,
    Cristina

  • Issue with Dashboard Prompt passing value to Presentation Variable

    I have 2 tabular reports that grab 2 variables respectively: @Month and @Year.
    The reports work fine.
    My issues is that to compute the most recent month & year, so I can pass the values to the 2 variables mentioned above, I have a dashboard prompt on the same page as the 2 reports. In the dashboard prompts (Edit Box types), I have SQL in the "Default" that computes the most recent month & year. This logic also works perfectly when you preview the results of the prompt.
    My issue is that when I land on the page, it seems that the month & year prompts are not computing. I have an old value of "Dec" "2009" instead of "May" "2010".
    It seems the Default SQL logic is NOT running on its own? As an aside, we do our development in a test environment and the catalog is promoted to production nightly. The "Dec" and "2009" I see is the correct value for the test environment, so it looks as if the defaul values are just being migrated with the catalog, but then the SQL to compute the latest values of the 2 propmts are never executing when the user lands on the page? Thus everyone sees Dec 2009 data instead of May 2010...Help!

    Hi,
    dgerena wrote:
    My issues is that to compute the most recent month & year, so I can pass the values to the 2 variables mentioned above, I have a dashboard prompt on the same page as the 2 reports. In the dashboard prompts (Edit Box types), I have SQL in the "Default" that computes the most recent month & year. This logic also works perfectly when you preview the results of the prompt.You are creating the second prompt (edit box) to make the first prompt values, You can use the same sql in the report default to SQL in the first prompt itself.
    If I am wrong please clarify.
    Thanks,
    Vino

  • File Adapter vs BPEL interaction issue on high availability environment

    Hi all,
    i would really appreciate your help on a matter i'm facing about a composite (SCA) deployed on a clustered environment configured for high availability. To help you better understand the issue i briefly describe what my composite does. Composite's instances are started by means of an Inbound File Adapter which periodically polls a directory in order to check if any file with a well defined naming convention is available. The adapter is not meant to read the file content but only its properties. Furthermore, the adapter automatically makes a backup copy of the file and doesn't delete the file. Properties read by the adapter are provided to a BPEL process which obtains them using the various "jca.file.xyz" properties (configurable in any BPEL receive activity) and stores them in some of its process variables. How the BPEL process uses these properties is irrilevant to the issue i'd like to pose to your attention.
    The just described interaction between the File Adapter and the BPEL process has always worked in other non-HA environments. The problem i'm facing is that this interaction stops to work when i deploy the composite in a clustered environment configured for high availability: the File Adapter succeeds to read the file but no BPEL process instance gets started and the composite instance gets stuck (that is, it keeps always running until you don't manually abort it!).
    Interesting to say, if I put a Mediator between the File Adapter and the BPEL, the Mediator instance gets started, that is the file's properties read by the adapter are passed to the mediator, but then the composite gets stuck again 'cos even the mediator doesn't seem to be able to initiate the BPEL process instance.
    I think the problem lies in the way i configured either the SOA infrastructure for HA or the File Adapter or BPEL process in my composite. To configure the adapter, i followed the instructions given here:
    http://docs.oracle.com/cd/E14571_01/integration.1111/e10231/adptr_file.htm#BABCBIAH
    but maybe i missed something. Instead, i didn't find anything about BPEL configuration for HA with SOA Suite 11g (all the material i found refers to SOA Suite 10g).
    I've also read in some posts that for using the db as a coordinator between the file adapters deployed on the different nodes of the cluster, the db must be a RAC! Is that true or is possible to use even another type of oracle db?
    Please, let me know if someone of you has already encountered (and solved :)) a problem like this!
    Thanks in advance,
    Bye!

    Hi,
    thanks for your prompt reply. Anyway, i had already read through out that documentation and tried all settings suggested in it without any luck! I'm thinking the problem could be related to the Oracle DB used in the clustered environment, which is not RAC while all documentation i read about high availability configuration always refers to a RAC db. Anyone knows if a RAC Oracle DB is strictly needed for file adapter configuration in HA cluster?
    Thanks, bye!
    Fabio

  • Prompt Propagation Issue across dashboard pages in a dashboard

    I have a issue of prompt propagation in a dashboard, that is the various dashboard page prompts use same presentation layer column then the prompts are taking the filter values filters on each other dashboard. Even if I try to change the scope of each dashboard prompt to only dashboard page only the value propagates to next dashboard page.
    I cannot redesign the whole dashboard as it will need lot of effort , I have implemented a fix for now but I am searching for some java script code which I could invoke using OnPageLoad event to clear and reset all the page prompts to defalut values.
    Can you guys let me know if you have any java script like this.

    Can some one provide a alternative solution to this issue.
    Once more I am writing down the issue:
    On a dashboard is multiple dashboard pages multiple prompts, but if there are some prompts common between those dashboard pages which basically shares the same column formula, then these dashboard do propagate their values from one dashboard page to another.
    Even setting the dashboard page prompt scope to page only cant stop this values propagation issue form one dashboard to another.
    I know to fix it I will have to redesign the whole dashboard but that will take lot of time and effort starting from RPD to Reports.
    is there some fix to fix it in the OBIEE Answers itself without touching the RPD. I cant try changing the column formula with case statement as then the case will flow in the report query and it will not use the index defined on the columns.
    Please let me know if some one can throw some light on this.

  • Issue with dashboard images in OBIEE11g

    We have build a tool in java which is used for customizing the skin and style sheet components
    in the OBIEE11g so that the user define their own user interface for the OBIEE11g screens.
    The tool behaves erratically/unpredictably when images(Tab,Selected Tab,Unselected Tab,Logo etc) are changed which are basically made up of combination of images on OBIEE11G dashboard . Sometimes all components are not loaded on OBIEE front end and sometimes it cannot load images saying the image contains error.
    This issue occurs when we make repeated or frequent changes to components like say dashboard logo changed 4-5 times using the tool but the changes are not reflected on OBIEE 11g dashboard page.. wanted help or insight on how to resolve this issue.

    922169 wrote:
    We have build a tool in java which is used for customizing the skin and style sheet components
    in the OBIEE11g so that the user define their own user interface for the OBIEE11g screens.
    The tool behaves erratically/unpredictably when images(Tab,Selected Tab,Unselected Tab,Logo etc) are changed which are basically made up of combination of images on OBIEE11G dashboard . Sometimes all components are not loaded on OBIEE front end and sometimes it cannot load images saying the image contains error.
    This issue occurs when we make repeated or frequent changes to components like say dashboard logo changed 4-5 times using the tool but the changes are not reflected on OBIEE 11g dashboard page.. wanted help or insight on how to resolve this issue.Sounds like you have problem with browser cache. What browser is that? IE? FireFox? Clear cache after any change will help

Maybe you are looking for