Cache Disable problem in firefox35

i have aspx pages and i wrote Dim pstr As String = "private, no-cache, no-store ,pre-check=0,post-check=0,must-revalidate"
Response.AddHeader("Cache-Control", pstr)
Response.AddHeader("Pragma", "no-cache")
Response.AddHeader("Expires", "0")
Response.Cache.SetNoStore()
but the page is caching and can reload

Hi
There are few more places to check i think
1) go to RWB >> Cache Monitoring >> see both the notification table and cache status table. You find more clues to what is wrong.
2) Go to RWB >> SLD Registration (this is on PI7.11, not sure on previous versions) >> select Adapter engine >> there are several Cache notifications there. They should be all green
Kr
Robert

Similar Messages

Need to avoid exception w.r.t database when caching disabled, skip database

I have a situation here.
Want to bypass database connection if caching disabled. If caching found enable, only then try to establish a database connection.
One part of application should work when database is down as it doesn't require connection to database at all.
While other parts should throw exception when database connection not available.
the piece of code looks like this:
public byte[] getStagedSchedule(long begin, int channelID, String stage, String username, String password, Number releaseID, Number planningTypeId ) throws SchedExExportException, SecurityServiceException
byte[] ret = null;
try
Date myDate = new Date(begin);
this.stageConfig = new StageConfig(stage, new Integer(channelID), myDate);
if(!this.stageConfig.isCached())
IService service = null; //database connection not required here (can handle that part)
StageAccessService myStage = new StageAccessService(service, myDate, new Integer(channelID), stage,username, releaseID, planningTypeId);
try{
ret = myStage.getXML();
catch(SchedExExportException e){
LogUtils.getExtLogger().error("PSIStopProcessException: " + e.getMessage(), null, null, e);
throw new SchedExExportException(e);
else{
IService service = ServiceFactory.getInstance("TxSchedEx"); //database connection string
StageAccessService myStage = new StageAccessService(service, myDate, new Integer(channelID), stage,username, releaseID, planningTypeId);
ret = myStage.getXML();
if(service != null)
service.release();
catch (ServiceException e)
LogUtils.getExtLogger().error("ServiceException: " + e.getMessage(), null, null, e);
throw new SchedExExportException(e);
return ret;
Now this code is working as per my requirement. for the time being.
But have two major problems to be solved here.
1) this piece of code :
this.stageConfig = new StageConfig(stage, new Integer(channelID), myDate);
is getting called in other class as well. i.e. inside this:
StageAccessService myStage = new StageAccessService(service, myDate, new Integer(channelID), stage,username, releaseID, planningTypeId);
have initialise method. which internally calls this method:
private boolean initialize(IService service, Date date, Number channel, String stage, Number releaseId, Number planningTypeId) throws PSIStopProcessException
boolean ret = false;
if ( ( null != service ) && ( null != date ) && ( null != channel)&& ( null != stage))
this.service = service;
this.scheduleDate = date;
this.scheduleChannel = channel;
this.stageConfig = new StageConfig(stage, channel, date);
this.planningTypeId = planningTypeId;
this.givenReleaseId = releaseId;
ret = true;
initRelease(releaseId);
else if ( ( null == service ) && ( null != date ) && ( null != channel)&& ( null != stage)) // just to handle if database connection not available.
this.scheduleDate = date;
this.scheduleChannel = channel;
this.stageConfig = new StageConfig(stage, channel, date);
this.planningTypeId = planningTypeId;
this.givenReleaseId = releaseId;
ret = true;
return ret;
Because StageAccessService is the real entry point for all other classes to access information about stage (staging). (So making StageConfig singleton, won't help me)
Now is there any way i can avoid :
this.stageConfig = new StageConfig(stage, channel, date);
getting called twice in my code.
why this is required is this method checks for caching real values.
public byte[] getXML() throws SchedExExportException
byte[] ret = null;
if ( !this.stageConfig.isCached() )
ret = dynamicLoadXML();
else
ret = loadReleaseFromStage();
if (ret == null && this.stageConfig.isLazyLoading())
ret = dynamicLoadXML();
saveScheduleInStage(ret);
and so on.............
try{
if (this.stageConfig.isTransformSchedules() && ret != null)
etc
2) Other workaround can be like: check if database connection is there or not. log the exception in catch block. but don't throw back.
So that the part which doesn't require database connection can work. But if request is not calling that part, then better throw exception also.
I don't know whihc approcah is good in this case.
Can anyone suggest anything better then this.
thanks.

I'm afraid that you need to provide further info about your two databases like versions, whether they have the replication option installed etc.
Generally speaking you have two methods available:
1. Use the replication options (needs setup like repadmins, master sites, snapshots etc)
2. Script it yourself (ie rewrite the replicator :-) trough DBlinks, stored procedures etc.
I would reccommend option 1 since you do not need to re-invent the wheel.
null

IOS 6.1.3 WIFI button disable problem on iPhone4S - It is definitely a BUG

Hi Apple Fans
I have a full house of Apple products from iPhone -> iPAD -> iPod -> Mac -> AirPort, and I am suffering from WIFI button disable problem after upgrade to iOS 6.1.3, without any clue after calling Apple Support, factory reset and reload iPhone for more than 10 times. I also try all tips on Apple Support Communicties except put it into a freezer, still no any luck. Apple Support suggests that my iPhone may be factly!
Tonight, I can get my WIFI back in below sequence:
1. Switch to English language from Chinese
2. Turn Cellular Data Option to off
3. Reset Network Setting
After the phone reset, the WIFI row show 'Not Connected', and I can select my home WIFI (Airport Express) without trouble. To prove my finding is workable to all case, can you try the same and update here if it works for you?
Good Luck!
PS: I always believe it is a BUG.

Hi,
I sympathise with you as my iPhone 4s is 7 months old and is also greyed out. I tried everthing except the potentially stupid one of putting the iphone in a freezer! I took the phone back to the vendor who sent it away and repaired it. But alas after a month it is greyed out again. I have again returned to the vendor and he will repair it again. I asked him how and he told me it is a software conflict and he has to spend around 9 hours downloading a patch repair. Apple are aware of this issue and I feel completely let down because they have not posted a fix on the net. Presently I am living and working in Dubai, back in the UK I am sure my iPhone would have been exchanged for a new one. I need my iPhone for my work and cannot afford to just buy a new one so I have been let down and despite for years being a supporter of Apple and their products I shall think twice before investing in any more Apple products.

Cache Refresh Problem

Hi,
We updated XI 3.0 to SP4, and started seeing several problems related to Cache Refresh and JCo.
In the SAPGUI in transaction SXI_CACHE, we are unable to refresh the cache, and getting the following error:
Connection to system RUNTIME using application RUNTIME lost. Detailed information: Error accessing "http://NETWEAVER:50000/run/hmi_service_id_fresh_mappings/int?container=any" with user "XIDIRUSER". Response code is 503, response message is "Service Unavailable".
In SM59 for RFC HTTP destinations, the INTEGRATION_DIRECTORY_HMI test gives the HTTP/1.1 500 Internal Server Error. The URL is /dir/CacheRefresh.
On the Runtime Workbench, I am trying to run the self-test for Mapping Runtime. We get the following errors:
Ping Status: HTTP request failed. Error code: "503". Error message: "Service Unavailable"
Self-test status: HTTP request failed. Error code: "503". Error message: "Service Unavailable"
We are on XI3.0 SP4, J2EE SP7 and ABAP SP4.
What can I check on the J2EE server to see if the service is running ? And what can I do to fix the JCo connections ? Thanks,
Manish

Thanks Hart. I have updated the URL and it succeeds on Test.
However, I still have the Cache updation problem.
When I update an object (say, a mapping) in the Integration Builder, and activate it, the XI Server Cache should get updated with this new object.
On running the scenario, I am getting the following error as observed in the monitor (SXMB_MONI):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="XICACHE">UPDATE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>HTTP status code401 Unauthorized</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An error occurred when refreshing the XI runtime cache</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
To resolve this problem, I have to manually go to the transaction SXI_CACHE, and do a delta cache refresh. It asks for the user credentials everytime for XIISUSER.
Is there a way to automatically enable this user to enable the cache refresh in the background ?
thanks,
Manish

Cache update problem in Integration Directory

Hi all,
We have a cache update problem in our PI development server.
If we try to edit, save and activate any of the ID objects, under Cache notifications>Central Adapter Engine> all these objects are displayed as gray items.
We have tried:
1. Clearing the SLD Data Cache.
2. Did SXI_CACHE complete refresh.
3. Did CPA cache refresh.
4. Did a complete cache refresh of the server.
5. Restarted the server.
But still the problem has not bee resolved. Could you pls provide your inputs and resolution points.
Thank you very much.
regards,
Jack Nuson

HI Jack ,
first try to manually update the cache from ID select on your cache notifiaction and click on delta cache refresh button and refresh button .IF it does not yied any result then
Perform a full cache refresh using the URL
http://<host>:<port>/CPACache/refresh?mode=full . If the cache refresh happens properly then your problem will get resolved other wise you have to see the cache log to view why it failed there it will show you the exact reason . You might need to restart your java server also if the problem persist .
Regards,
Saurabh

Drive Cache Disabled on recently replaced RAID drive

Hello. We recently had a 250GB drive go down in the Xserve RAID at my work. Unable to get a replacement, we put a 500GB drive in. We realize that we will only get 250GB capacity out of the drive. Everything seems to be working fine, but in the RAID admin utility, the newly replaced drive has "drive cache disabled" showing, as well as "powered on hours: unknown"
My questions are: What are the consequences of this? Is this something a firmware update would fix? Any other concerns?
Thanks

The Apple Drive Modules use an Apple specified firmware from the manufacturer. The RAID chassis itself relies on this. So when you replace it with off-the-shelf drives you may not get all the functionality and control, as you're seeing.
No way to fix this other than getting a drive from Apple, or in getting one with the same firmware (maybe same exact model #) that Apple uses on the 500 GB drives.

Cant open pages that need log in info. I've cleared cache, disabled extensions and deleted all cookies to no avail....help!!!

Any page that requires a username and password will not open, this started last Thursday and at that time I was able to reinstate by clearing cache, disabling extension and deleting cookies. Subsequently that fix failed and now doing all those things has no effect.

I found the answer: http://forums.adobe.com/thread/1018071?tstart=0 It was a conflict with RealPlayer. Incidentally, in order to find this thread again, I had to use a google search. Is there really no way to find a person's own questions via our own profile???

Is there a solution to Rapidweaver Stacks Cache size problems?

Is there a solution to Rapidweaver Stacks Cache size problems?
My website http://www.optiekvanderlinden.be , has about 100 pages and is about 250MB in size. Every time I open RapidWeaver with the Stacks-plugin, the user/library/cache/com.yourhead.YHStacksKit folder grows to several Gigabytes in size. If I don't manually empty the com.yourhead.YHStacksKit Cache daily, AND empty the Trash before i turn off my mac, my Mac still has problems and stalls at startup the next day. Sometimes up to 5 minutes and more before he really boots. If i have a been working on such a large site for a few weeks without deleting that cache, than my iMac doesn't start up anymore, and the only thing left to do is completely reinstall the iOs operating system. This problem doesn't happen the days i use all my other programs but don't use Rapidweaver.
Does anyone know a solution and / or what is the cause of this?

once more,
i just launched my project in Rapidweaver, and WITHOUT making any changes to my pages, the cache/com.yourhead.YHStacksKit folder filled itself with 132 folders (total 84Mb), most of them containing images of specific pages etc. The largest folder in the cache is the one with the images of a page containing a catalogue of my company, this folder is 7Mb. It seems by just starting up a project, immediately different folders are created containing most of the images in my project, and some folders with a log.txt file. Still i don't see the reason why it is filling op a huge Cache even without making changes to the project. I have 2 different sites, so 2 different projects, and i get this with both of them.

User Factory Cache - Disable

Hi,
I would like to disable the User Factory Cache as this is causing problems where users attributes are cached and these parameters need to be dynamic as these can change from minute to minute.
If anyone can point to me the location where this setting can be found. I am aware this is going to cause a protential performance issue.
Any useful answers will be rewarded with points.

Hi,
you can configure the UME Cache using the Config Tool and there in Global Service Configuration ->com.sap.security.core.ume.service.
In the properties list you will find the property:
ume.cache.user_account.default_caching_time
with the value:
3600
According to the documentation the value should be seconds. As it says that the user account information will be refreshed every hour by default.
I guess when you change the value to a value suitable for you and restart the cluster you can achieve your requirement.
You will find also some other properties here which can be used to adjust the other factories and values of the cache. These are more or less self explanatory.
However, I have not tested this yet. I only found these parameters lately because of an other issue with the UME cache.
Hope it helps and best regards,
Stefan Brauneis

L3 cache disabled!

I'm working on a dual G4 1.25ghz (FW800) and I noticed that when I look in CHUD it doesn't show the L3 cache for either processor. Also, in REGGIESE, the L3 cache checkbox is unchecked, but if I try to check it, I get a message that says it can't write to that register. Additionally, if I look at the diagnostics in the System Profiler there's a note that says that the diagnostic failed.
So here's the question -- is my L3 cache fried, or is it somehow disabled? I know there's a way to disable/enable caches on the PowerBooks, but is there a similar process on the PowerMac?
Thanks!

Okay, I've tried using the L3 Enabler program from [email protected] and here's what I got:
Powermac G4 FW800 Dual 1.25ghz
Machine Name: Power Mac G4
Machine Model: PowerMac3,6
CPU Type: PowerPC G4 (3.2)
Number Of CPUs: 2
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 256 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.5.7f1
Last Run: 8/29/06 9:20 PM
Result: Failed
Failure type: External cache
This application has now set the pre-boot so the white screen
with gray Apple comes on and then switches to the black screen and
displays the startup process, noting errors and then moves to the
bluescreen for the system startup. This happens at each startup now.
I ran the dmesg command and it produces nothing, simply returns to the
terminal line. When I shut down the computer, it moves back to the
black screen and displays the message it is shutting down the cpus and
then shuts off.
The system seems to be running fine once it starts up but you can see
something is very wrong with the kernal now that I have used the
L3Enabler. My L3 cache is still not turned on as you can see above. I have
tried starting from another boot drive and it is the same, so the
program has done something fundamental that needs to be reset, the problem is not within the boot system.
Now I am in more trouble than before using the program!
Does anyone have a method for how to fix this??
Thanks!!!!

Cache-Control problem

I don't really know if this is a Tomcat problem or a jsp problem... I have some java server pages with form components and when I hit the back button in a browser, the contents of a form disappear. I checked the response header with a perl script and it seems that there's always Cache-Control: no-cache and Pragma: No-cache in the header. I didn't put them there. I've tried to put some lines as
response.setHeader("Cache-Control","max-age=3600");
response.setHeader("Pragma","max-age=3600");
response.addHeader("Cache-Control","max-age=3600");
response.addHeader("Pragma","max-age=3600");
into my jsp, but they have no effect. I've tried disabling all filters, no effect. I've done a full text search on the whole tomcat directory tree with keywords like no-cache, cache-control and those words don't appear anywhere (but in my jsp). I suspected that apache could mess things up, but browsing the jsp's directly from tomcat (through port 8080) does the same.
Running out of ideas... Do you have any?
-Marko

It's neither. It's a browser problem... and perhaps your assumption that the browser has to remember what was in the form fields when you go back. Cache control has to do with caching the page, not form input anyway. I've never seen any header settings which tell instruct a browser what to do with form data after the form is submitted.
You could provide a back button on the form and have the JSP fill in the default values based on what's stored in the session, if you are storing it in the session. But if it's not a multipage form, there usually is no reason to be "going back" anyway, because the form is submitted and whatever's done with that data should be done by that point.
Tomcat could be defining default headers for anything in some config file.

Crystal Report Caching(?) Problem

Post Author: cfernald
CA Forum: General
We have a web app that launches Crystal Reports (version 10) in the crystal reports viewer that plugs into IE (version 6.0). The whole thing is managed by Crystal Enterprise Server.
The problem: You launch a report and let's say it shows you 10 lines of data on the report. You perform some activity in the application that updates the database such that an 11 lines should appear on the report. However, when you run the report again (after closing the IE session from the first viewing) you only see 10 lines (while expecting 11).
There's a little "dance" I do to "clear cache": I hit the "Refresh Report" icon (the "lightening bolt" icon), close the browser and then relaunch the report. This seems to tell the report to re-read the database rather than use the data that was previously retrieved.
Clearly the results are being cached somewhere - can someone point to where I might look to control that behavior?
\cbf

Post Author: cfernald
CA Forum: General
Ok, I did some additional research and learned all about how CR has a CacheServer that can be controlled through the Crystal Management Console. Specifically there is a setting for the CacheServer named: "Oldest on-demand data given to a client" which is expressed as a number of minutes. From the manual:
This value controls how long report pages and prompt pages can stay in the cache. Once an object has been in the cache for the given number of minutes, it is aged out of the cache and there will be no further cache hits for this object. The default setting is 0 u2013 which means that no prompt pages or report pages will be server from cache. For optimal prompting performance, we recommend setting this value to the largest possible value without impacting data currency. For example, if the data that your reports access changes only once a day, then you can probably set this value to be 8 hours (or 480 minutes). If the data that your reports access changes every 5 seconds, and your report consumers need to see current data, then this value should be set to 0.
Based on the last sentence above, I want this value set to zero to meet our reporting needs. However, after setting it to zero and restarting everything, I still see cache entries in the CacheServer directory and Crystal is still caching report data.
What am I missing?

Using a hashmap for caching -- performance problems

Hello!
1) DESCRIPTION OF MY PROBLEM:
I was planing to speed up computations in my algorithm by using a caching-mechanism based on a Java HashMap. But it does not work. In fact the performance decreased instead.
My task is to compute conditional probabilities P(result | event), given an event (e.g. "rainy day") and a result of a measurement (e.g. "degree of humidity").
2) SITUATION AS AN EXCERPT OF MY CODE:
Here is an abstraction of my code:
====================================================================================================================================
int numOfevents = 343;
// initialize cache for precomputed probabilities
HashMap<String,Map<String,Double>> precomputedProbabilities = new HashMap<String,Map<String,Double>>(numOfEvents);
// Given a combination of an event and a result, test if the conditional probability has already been computed
if (this.precomputedProbability.containsKey(eventID)) {
if (this.precomputedProbability.get(eventID).containsKey(result)) {
return this.precomputedProbability.get(eventID).get(result);
} else {
// initialize a new hashmap to maintain the mappings
Map<String,Double> resultProbs4event = new HashMap<String,Double>();
precomputedProbability.put(eventID,resultProbs4event);
// unless we could use the above short-cut via the cache, we have to really compute the conditional probability for the specific combination of the event and result
* make the necessary computations to compute the variable "condProb"
// store in map
precomputedProbabilities.get(eventID).put(result, condProb);
====================================================================================================================================
3) FINAL COMMENTS
After introducing this cache-mechanism I encountered a severe decrease in performance of my algorithm. In total there are over 94 millions of combinations for which the conditional probabilities have to be computed. But there is a lot of redundancy in this set of feasible combinations. Basically it can be brought down to just about 260.000 different combinations that have to be captured in the caching structure. Therefore I expected a significant increase of the performance.
What do I do wrong? Or is the overhead of a nested HashMap so severe? The computation of the conditional probabilities only contains basic operations.
Only for those who are interested in more details
4) DEEPER CONSIDERATION OF THE PROCEDURE
Each defined event stores a list of associated results. These results lists include 7 items on average. To actually compute the conditional probability for a combination of an event and a result, I have to run through the results list of this event and perform an Java "equals"-operation for each list item to compute the relative frequency of the result item at hand. So, without using the caching, I would estimate to perform on average:
7 "equal"-operations (--> to compute the number of occurences of this result item in a list of 7 items on average)
plus
1 double fractions (--> to compute a relative frequency)
for 94 million combinations.
Considering the computation for one combination (event, result) this would mean to compare the overhead of the look-up operations in the nested HashMap with the computational cost of performing 7 "equal' operations + one double fration operation.
I would have expected that it should be less expensive to perform the lookups.
Best regards!
Edited by: Coding_But_Still_Alive on Sep 10, 2008 7:01 AM

Hello!
Thank you very much! I have performed several optimization steps. But still caching is slower than without caching. This may be due to the fact, that the eventID and results all share long common prefixes. I am not sure how this affects the computation of the values of the hash method.
* Attention: result and eventID are given as input of the method
Map<String,Map<String,Double>> precomputedProbs = new HashMap<String,Map<String,Double>>(1200);
HashMap<String,Double> results2probs = (HashMap<String,Double>)this.precomputedProbs.get(eventID);
if (results2Probs != null) {
 Double prob = results2Probs.get(result);
 if (prob != null) {
 return prob;
} else {
 // so far there are no conditional probs for the annotated results of this event
 // initialize a new hashmap to maintain the mappings
 results2Probs = new HashMap<String,Double>(2000);
 precomputedProbs.put(eventID,results2Probs);
* Later, in case of the computation of the conditional probability... use the initialized map to save one "get"-operation on "precomputedProbs"
// the variable results2probs still holds a reference to the inner HashMap<String,Double> entry of the HashMap "precomputedProbs"
results2probs.put(result, condProb);And... because it was asked for, here is the computation of the conditional probability in detail:
* Attention: result and eventID are given as input of the method
// the computed conditional probabaility
double condProb = -1.0;
ArrayList resultsList = (ArrayList<String>)this.eventID2resultsList.get(eventID);
if (resultsList != null) {
 // listSize is expected to be about 7 on average
 int listSize = resultsList.size();
 // sanity check
 if (listSize > 0) {
 // check if given result is defined in the list of defined results
 if (this.definedResults.containsKey(result)) {
 // store conditional prob. for the specific event/result combination
 // Analyze the list for matching results
 for (int i = 0; i < listSize; i++) {
 if (result.equals(resultsList.get(i))) {
 occurrence_count++;
 if (occurrence_count == 0) {
 condProb = 0.0;
 } else {
 condProb = ((double)occurrence_count) / ((double)listSize);
 // the variable results2probs still holds a reference to the inner HashMap<String,Double> entry of the HashMap "precomputedProbs"
 results2probs.put(result, condProb);
 return condProb;
 } else {
 // mark that result is not part of the list of defined results
 return -1.0;
 } else {
 throw new NullPointerException("Unexpected happening. Event " + eventID + " contains no result definitions.");
 } else {
 throw new IllegalArgumentException("unknown event ID:"+ eventID);
 }I have performed tests on a decreased data input set. I processed only 100.000 result instances, instead of about 250K. This means there are 343 * 100K = 34.300K = 34M calls of my method per each iteration of the algorithm. I performed 20 iterations. With caching it took 8 min 5 sec, without only 7 min 5 sec.
I also tried to profile the lookup-operations for the HashMaps, but they took less than a ms. The same as with the operations for computing the conditional probability. So regarding this, there was no additional insight from comparing the times on ms level.
Edited by: Coding_But_Still_Alive on Sep 11, 2008 9:22 AM
Edited by: Coding_But_Still_Alive on Sep 11, 2008 9:24 AM

Xi Data Cache Refresh Problem

Hello,
We have following Problem:
We send an XML-Request with HTTP-Adapter to XI and get Data from R/3, works fine.
But when we send a Second Request we become an Error.
The error comes because in the Java Runtime the XI writes wrong values into Message.
When we do a XI Data Cache Refresh for INTEGRATION_SERVER
and INTEGRATION_RUNTIME we can send a message and all works fine again.´
Any Idea why the XI Caches Data from Request and set this values in the message of request that was send later?
Thanks,
Robin

Hi,
I think both are same. Because in SXi_ADM we also define our IS. so i think it may be same ...
If I am wrong please share your knowledge . in this thread for more clarification ..
Regards,
Amit

Cache/Refresh Problem in Crystal Management Console 10..

Hi All
I have suffering from very major problem related to Data refresh....
I m using CR IX as a design Crystal report and Crystal Management console 10 as a Crystal Report Server....
The Problem is that : After Publishing Report On Report Server(CMC) i m calling through my report by the help of reportId which was generated during Publishing Report : So If My report containing Two Parameter the i pass two Parameter value from my Front end as ....
http://<server>/crystal/enterprise10/admin/en/viewrpt.cwr?init=java&apsuser=administrator&apspassword=&apsauthtype=secEnterprise&id=2363&PROMPT0=1914&PROMPT1=GARETH%20%20%20MASON&PROMPT2=canada
but the problem is that If any user Update any value on database and after updation again he check to crystal report ,but it not reflect in Crystal Report....
second problem is:
there is a yellow button display ON CMC ,if user click on this button and change the parameter value it change but again user call report from front end it shows previous value which he entered through click on Yellow Button...
I have checked all option on Crystal report Like Unckeck Option Save Report with data ....
But Still I m facing such Problem ......Please Provide me Proper solution...
should I need to change Setting of Crystal Configuration Manager .....
I need Your Assistance.....
Regards
Ankit shukla

Hi Nakul
Thanks For your response...
The URL Which I mention was as example for calling report from Report server...In My form I m using two Drop down
(1) Country Name : List Of different country
(2) Client Name : List Of Different client
If I select Country India and Client ankit Then In My URL display Prompt 0 =India & Prompt 1=Ankit
and data display For such record....
But When I change Country Name : UK And Client =Steban then In My URl display Prompt0=UK & Prompt1=Steban
But Report Contains Previous Record Of Ankit & India..
So It means My Parameter value are changing dynamically but Cache Server Of CMC are not refresh when i Click On Refresh Button which are displaying in Viewer the report Data are reflecting....
So Please Provide me solution for given above problem.....
Do I need to change Crystal Configuration Management Setting ....but i don't know how it will be...
So Please give me any solution ...
Regards
Ankit Shukla

Cache Disable problem in firefox35

Similar Messages

Maybe you are looking for