Cache of the parameters....

Hi all, I have one find where result is one collection. The result is one Collection where of the values are repeats. I already verified the QL and values of the parameters in the call method. The two fields of the QL below are cmrs.
My ql is:
               <query>
                    <query-method>
                         <method-name>findByPastaAndIdioma</method-name>
                         <method-params>
                              <method-param>br.com.inttegra.infra.bean.pasta.PastaLocal</method-param>
                              <method-param>br.com.inttegra.infra.bean.idioma.IdiomaLocal</method-param>
                         </method-params>
                    </query-method>
                    <ejb-ql>
                         <![CDATA[select object(p) from PastaIdiomaEJB p where p.pasta = ?1 and p.idioma = ?2]]>
                    </ejb-ql>
               </query>
How to resolve this? Seem chache of the values.

There is a bug in finder with local/remote interface. This has been fixed in coming update release 2.

Similar Messages

Using the client result cache without the query result cache

I have constructed a client in C# using ODP.NET to connect to an Oracle database and want to perform client result caching for some of my queries.
This is done using a result_cache hint in the query.
select /*+ result_cache */ * from table
As far as I can tell query result caching on the server is done using the same hint, so I was wondering if there was any way to differentiate between the two? I want the query results to be cached on the client, but not on the server.
The only way I have found to do this is to disable all caching on the server, but I don't want to do this as I want to use the server cache for PL/SQL function results.
Thanks.

e3a934c9-c4c2-4c80-b032-d61d415efd4f wrote:
I have constructed a client in C# using ODP.NET to connect to an Oracle database and want to perform client result caching for some of my queries.
This is done using a result_cache hint in the query.
select /*+ result_cache */ * from table
As far as I can tell query result caching on the server is done using the same hint, so I was wondering if there was any way to differentiate between the two? I want the query results to be cached on the client, but not on the server.
The only way I have found to do this is to disable all caching on the server, but I don't want to do this as I want to use the server cache for PL/SQL function results.
Thanks.
You haven't provided ANY information about how you configured the result cache. Different parameters are used for configuring the client versus the server result cache so you need to post what, if anything, you configured.
Post the code you executed when you set the 'client_result_cache_lag' and 'client_result_cache_size' parameters so we can see what values you used. Also post the results of querying those parameters after you set them that show that they really are set.
You also need to post your app code that shows that you are using the OCI statements are used when you want to use client side result cacheing.
See the OCI dev guide
http://docs.oracle.com/cd/B28359_01/appdev.111/b28395/oci10new.htm#sthref1491
Statement Caching in OCI
Statement caching refers to the feature that provides and manages a cache of statements for each session. In the server, it means that cursors are ready to be used without the need to parse the statement again. Statement caching can be used with connection pooling and with session pooling, and will improve performance and scalability. It can be used without session pooling as well. The OCI calls that implement statement caching are:
OCIStmtPrepare2()
OCIStmtRelease()

How to stop caching on the server

Hello,
Can anyone please guide me as to how do we disable caching on the
portal server since the changes i am making in the JSP pages are not
reflected immediately. I have already cleared the browser cache but now i
want to clear the cache on the portalserver. I have also cleared all the
class files created when the jsp was compiled but still there is no change.
If anyone has faced similar problems and can throw some light on it.
akshay

Akshay
I faced the same problem as you did.I went thru what Adrian advisesd and it works.Did
you update teh correct XML file?.In my case,the weblogic.xml file is whawt holds
this property and resides in
D:\wlportal4.0\applications\portal\dp2\WEB-INF\weblogic.xml
where 'dp2' is the sample portal iam working on.
I hope this helps.
- Logesh
"akshay" <[email protected]> wrote:
Hi Adrian,
Thanks again for the quick reply but even this setting
did not
work.
This has created a major development problem and the only way out i found
was either to restart the server or change the name of the file which
i am
accessing. Please suggest some other way to achieve this no caching state
on
the server i even cleared the browser cache.
Thanks in advance
akshay
"Adrian Fletcher" <[email protected]> wrote in message
news:[email protected]...
Akshay,
Ok, now I understand your problem. What you need to do is to changethe
JSP
operating parameters for this webapp. These parameters are found inthe
weblogic.xml file associated with your webapp. The reference for thejsp
descriptor element can be found here:
http://edocs/wls/docs61/webapp/weblogic_xml.html#1012195
I think the parameter you need to change is pageCheckSeconds. Ifyou set
this to 0 then the page is checked every request.
Hope this helps,
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"akshay" <[email protected]> wrote in message
news:[email protected]...
Hi adrian,
Thanks for your quick reply I am not aware about theclustered
environment but here i have created a jsp page (named first.sjp)
to
check
a
connection pool i have created which i have placed it along with
the
index.jsp page of stockportal and using the following URl i havemade a
request http://<myportalserver>:7501/stockportal/first.jsp the first
time
when i request for this page it works fine -- the data flows perfectlybut
after making any changes say for example if i change the table name
from
where the data is to be fetched
it does not show me the new data it shows me the data from the previous
table. whereas if i change the name of the jsp page and request itworks
fine. I want to disable this caching
at the server to make this thing work i cleared all the cache ofthe
browser
but still could not achieve no cache state.
thanks in advance
akshay
"Adrian Fletcher" <[email protected]> wrote in message
news:[email protected]...
Akshay,
The design of the caching in portal is such that all changes should
be
reflected immediately, even across a cluster. However there isone
outstanding issue around a performance enhancement for the anonymoususer
case, where this cache is not updated unless the associated .portal
file
is
datasynced. So for changes to the default group either test with
a
logged
in
user of this group or do a datasync to clear the cache.
If this does not solve your problem please let us know.
Sincerely,
Adrian.
Adrian Fletcher.
Senior Software Engineer,
BEA Systems, Inc.
Boulder, CO.
email: [email protected]
"akshay" <[email protected]> wrote in message
news:[email protected]...
Hello,
Can anyone please guide me as to how do we disable caching
on
the
portal server since the changes i am making in the JSP pages
are not
reflected immediately. I have already cleared the browser cachebut
now
i
want to clear the cache on the portalserver. I have also cleared
all
the
class files created when the jsp was compiled but still there
is no
change.
If anyone has faced similar problems and can throw some light
on it.
akshay

Data processing in multiple caches in the same node

we are using a partitioned cache to load data ( multiple types of data) in multiple named caches. In one partition, we plan to have all related data and we have got this using key association.
Now I want to do processing with in that node and do some reconciliation of the data from various sources. We tried entry processor, but we want to consolidate all data from multiple named caches in the node. In a very naive form, I am thinking each named cache as a table and i am looking at ways to have a processor that will do some some processing on the related data.
I see we could use a combination of Invocable object, Invocation service and entry processors, but I am unable to implement it successfully.
Can you please point me to any reference implementation where I can do processing at the data node without transfering data back to client.
Also any reference implementation of Map reduce (at the server side) in coherence would be helpful.
Regards
Ganesan

Hi Ganesan
A common approach to perform processing in the grid is to execute background threads in response to backing map listener events. The processing is co-located with data because the listener will be called in the JVM that owns the data. The thread can then make Coherence calls to access caches just like any other Coherence client.
The Coherence Incbutor has numerous examples of this at http://coherence.oracle.com/display/INCUBATOR/Home. The Incubator Common component includes an event processing package that simplifies the handling of events. See the messaging pattern for an example: Message.java and MessageEventManager.java
I am not sure I answered your question but I hope the information helps.
Paul

How do I use the Parameters from URL to filter on Content Query in ItemStyle.xsl?

Hi, I might need your help with code that Content Query under <xsl:Template...> that I need a filter for 3 parameter from url (from date, to date(for date range) and type.
eg: www.mywebsite.com/pages/Filter.aspx?DateFrom=01/01/2012&DateTo=01/01/2013&Type=sports
I've google for help and not sure they seem working so far.

Hi,
If you want to filter a Content Query Web Part with the parameters from URL, we can achieve it with OOTB of Content Query Web Part by adding "Additional Filters" in "Web Part Properties"->"Query". We can add
three filters like:
date is greater than [PageQueryString:DateFrom]
And
date is less than [PageQueryString:DateTo]
And
type is equal to [PageQueryString:Type]
Then redirect to the URL: www.mywebsite.com/pages/Filter.aspx?DateFrom=01/01/2012&DateTo=01/01/2013&Type=sports, the query results will be filtered.
Please reply freely if I misunderstand your meaning or there any other questions.
best regards
Patrick Liang
TechNet Community Support

How do I get the Parameters of a Stored Procedure from my Java Code?

I want to get the parameters in my Java code. How do I do this with Jdbc?
In ADO it was: myCmd.Parameters.Refresh();
Any idea what it is in Jdbc?

no, what I want is to know what parameters are required by my stored proc. So basically I tell it, "My Stored Proc is name 'SomeName'. What are the parameters I need to fill for this proc?" Then it puts those in for me, and then I fill the values. That's what Cmd.Parameters.Refresh() does in VB/C++. So if I had a proc name "MyProc" with:
@Something int,
@Another varchar(25)
Then if I did cmd.StoredProc = "MyProc" (and told it where to find the DB), and then did cmd.Parameters.Refresh(), the cmd would then have those parameters with null values, so i could do:
cmd.Parameters(0) = 5
cmd.Parameters(1) = "hello"
Any idea how to do that in Java/Jdbc?

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to clear the cache in the portal browser

Hello Experts,
Iam unable to clear the cache in the portal. I tried clearing the Navigation cache , PRT cache,PCD cache,Database cache,UME cache.
The senario is in the browser if iam logging with some user X , he should see only 1,2,3 countries, and if i logg off and again logg in the same browser with different user he is seeing same 1,2,3 countries unlike he should see 4,5 countries.
But if iam opening in different browser iam getting the correct one with cache cleared.
I want to acheive this in the same browser.
Qucik help in solving out this cache problem is appreciable.
Regrds,
Manasa.

There is one more important cache: the HTTP Provider Service cache (in VA).
To find out why the browser is showing the same languages, analyze what the server is sending to the browser with HTTPWatch or Firebug and look at the cache flag. Also check what is the iView cache parameter? Is it user, session, shared or none?
How do you do the logoff? The best thing is to make sure that the HTTP Session is killed. If not, the portal may send data that is cached for the HTTP Session to the browser. When you open a new browser, you will also open a new HTTP Session. That could be the cause why it is working with a new browser instance.
br,
Tobias

Beginner Question - How to hide the parameters of a created process on a remote machine.

OK so I am useng the following Powershell command invoke-WmiMethod -class Win32_process -name Create -Argumentlist ($some_command_with_parameters) -Authentication 6 -ComputerName $Your_Computer -Credential $cred
The question comes when I pass the command with parameters in the command is encrypted until it gets to the destination but then it appears to be very easy to view the command parameters by using a PROCESS Get command while that command is being run.
Is there a way to hide the parameters on the remote system to prevent someone from viewing those at the time I run my script. The problem is that I would like to pass a username and password as a parameter but would like to make sure it is fairly secure.

Yeah I was trying to execute a cmd.exe /c ... This works great except the for mentioned issue. Essentially what I was trying is to create a backward mapped drive. In order to transfer a log that is created from the command I am running,
back to my machine. I know the process I am doing could potentially be done different but in the enviroment I am in it is very restricted so I am basically working with what I have here. Is there any way to at least make sure that no one other
than the person who created the process can see its arguments? Interactive prompts or using files won't work as I am doing this remotely and essentially issuing one long command that will do everything I want. A file might work but I don't have a secure
way to transfer a file as this has to be a process I can do on multiple servers and many of them do not have anything setup for doing that. The other issue is the credentials would still be unsecure on the server as long as the file was there.
I think my best bet would be if possible to restrict others from viewing a process and arguments that I create. Any ideas?

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

What are the names and the parameters of the SSIS reports

what are the names and the parameters of the SSIS reports
(delivered with and included in the SSMS)
to navigate from my reports to the build in reports
it's necessary to know the reportname and the parameters.
I want to "combine" respectively want to navigate
from custom reports (works excellent) to the 5 build in reports
please have a look at the attached picture and in particular
to the blue arrow.SSIS_ReportsNavigation
thank you for providing an answer or a hint.

to navigate from my reports to the build in reports
Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
The reports run in client side rendering mode = RDLC.
Olaf Helper
[ Blog] [ Xing] [ MVP]

What are the parameters which control the pop up of sales area

Hi Experts
What are the parameters which control the pop up of sales area along with sales office when Sold to party is fed in to the CRM order .
I have an issue   that, though the distribution channel and division is maintained in the sales org it is not   appearing in the pop up.
The BP   is extended to the sales area .
If any one can give me details / documentataion   on the setting , it is highly appreciated.
Regards
Raj

Dear Srikanth
Thank for your up date . in my case   the customer is assigned with   two sales area. The org model , nothing is maintained in the attributes , still one is appearing in the pop up and and other one is not . It is surpricing.
if you can mention the logic of maintaining the   division and distribution channel inthe attribute it is of great help.
Regards
Raj

Cache of the parameters....

Similar Messages

Maybe you are looking for