Cache url with parameter

Hi, All
I need to cache a site like the following:
http://host/myapp/index.do?locale=en
I used "Regular Expression" Type, with URL Expression defined as:
^/myapp/
/index*
^/myapp/index.do?locale=en$
But none works.
Please advice, Thanks,
Deborah

Hi, Christine
I removed ESI from the page header, changed the rule to "^/myapp/index.do", the page couldn't be cached.
Have you ever had a data action page cached without using ESI but webcache rules?
Deborah

Similar Messages

Open Doc URL with parameter in BI 4.0 to open Webi and Crystal report

Hi Experts ,
Has any one experienced the open doc URL to open the report and to pass the parameter to the new report .
I am well aware of the syntax of passing the parameter and use to work perfectly fine with XI 3.1 but its giving me griefs in BI 4.0 environment .
In the new report i am just trying to pass the Fiscal year as a parameter with the url i can open the report but it does not accept the value being passed with the url so i have to renter the values again .
I am using BO 4.0 SP2 Patch 6 and trying to intact with crystal and webi report built on top of BEx query with the fiscal year parameter defined in BEx query level .
Any comment on this will be appreciated.
Thanks,
Vibhav

Hi Nakul,
I am not using the user response to get the value i tested it in Crystal Enterprise environment i tired passing the following syntax
http://.../OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=...&lsSFiscal%Year%(Single%Value%Entry,%Required)={?0P_FYEAR}
{?0P_FYEAR} this is a variable comming form BEx query into Crystal i tired to use it and pass it to other report but i cannot pass it i have tried to pass the hardcoded value still i see the paramater screen and have to enter the value again.
I am not sure if anyone has tested this functionality in BI 4.0 environment .
Thanks,
Vibhav

Jumplink to external URL with parameter

Hello,
It is possible to use jumplink to external site or any url other than CR or WebI? Also need to pass parameter too. For example
http://abc.com?param1=[dimension]
where [dimension] is the value from the hierarchy it is jumping from.
Thanks
-rs

Hello RS
The Jumplinks are specifically designed to pass AOLAP cell context from AOLAP to WebI/CR. We have no plans at this time to add external URLs.
If you use BW then the solution is to use RRI and the URL sender.
If you do not use BW then you could raise an idea in Idea Place for this at http://ideas.sap.com.
Regards

How to put a link to an url with parameter in wiki page

Hi all,
i'am trying to use the wiki included in os x Server, and put a url link on one page like this :
http://www.google.fr/search?hl=fr&q=conversion+sek+euros
unfortunately when i click on this link it doesn't work.
When i go back to url link on the menu, the link is http://www.google.fr/search
have you any idea?
Thank's a lot
Thierry

Cross-posting bastard;-I always wondered... is that worse than a cross-dressing bastard?

Loading image with parameter

I'm trying to display image in report using image URL with parameter
for example
="http://www.ilikewallpaper.net/iPhone-5-wallpapers/download/6556/Dark-Light-iPhone-5-wallpaper-ilikewallpaper_com_"+Parameter!Test.Value+".jpg"
it dont work at all. and tried other ways possible.

Hi fawad_siddiqui,
Thank you for posting in MSDN forum.
According to your description, I am afraid that the issue is out of support of
Visual Studio General Forum which discuss VS IDE issue.
In addition, could you please tell me which kind of report you create? Please tell me detailed message about his issue so that we
will help you move this case to the specific
forum, you will get dedicated support from the experts.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Java Cache Viewer shows duplicate URL with different versions

In doing some testing lately we have come across a couple of situations where the same URL is showing in the JAVA cache viewer with different versions to them. In the case of a 1.7 JRE this is not causing any adverse effects however when utilizing a 1.6 JRE we are getting messages about mixed mode for the JAR files.
The jar file is signed as below:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Application-Library-Allowable-Codebase: *
Application-Name: named_applet
Built-By: relbuild
Permissions: all-permissions
Created-By: 1.6.0_17-b04 (Sun Microsystems Inc.)
Caller-Allowable-Codebase: *
Codebase: *
understanding the need to change the wildcard's to domains as we move forward. I am wondering why the jar file is being listed and called twice and why it is being recognized as signed one time and not the next.
The URL is identical in the cache viewer and the java console says it is not found in the cache when it is used the second time, even though previously in the session is finds it with the correct version.
Any advice would be helpful

that i even know, but the problem is that i do not have that version of java re installed, but i found distribution 07 of the same java version, i'll try it out with that.
but when it still doesn't work, then i still would like to find the link where i can download java version 1.4.2_06.

ORDS Template with parameter does not work

Hello everybody,
I can not get working a RESTful Service using the ORDS_SERVICES -API (ORDS version 3.0.0.343.07.58), same Query without parameter (hardcoded product_id) works fine.
declare
l_module_id number;
l_template_id number;
l_handler_id number;
l_parameter_id number;
begin
ORDS_SERVICES.delete_module(p_name => 'test_parameter');
l_module_id := ORDS_SERVICES.create_module(p_name => 'test_parameter',
                            p_uri_prefix => '/test_parameter',
                            p_items_per_page => 10,
                            p_status => 'PUBLISHED',
                            p_comments => null);
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info_10/',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = 2',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
/* now same result but with parameter */
l_template_id := ORDS_SERVICES.add_template(p_module_id => l_module_id,
                           p_uri_template => '/demo_product_info/{product_id}',
                           p_priority => 0,
                           p_etag_type => 'HASH',
                           p_etag_query => null,
                           p_comments => null);
l_handler_id := ORDS_SERVICES.add_handler(p_template_id => l_template_id,
                           p_source_type => 'MEDIA', -- source_type IN ('COLLECTION_FEED', 'COLLECTION_ITEM', 'FEED', 'MEDIA', 'PLSQL', 'QUERY', 'QUERY_1_ROW')
         p_source => 'select mimetype, product_image from demo_product_info where product_id = :product_id',
         p_format => 'DEFAULT',
         p_method => 'GET',
         p_items_per_page => null,
         p_mimes_allowed => null,
         p_comments => null);
l_parameter_id := ORDS_SERVICES.add_parameter(p_handler_id => l_handler_id,
                           p_name => 'product_id',
         p_bind_variable_name => 'product_id',
         p_source_type => 'URI',
         p_param_type => 'INT',
         p_access_method => 'IN',
         p_comments => null);
commit;
end;
The first template works fine:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info_10/
shows a jpeg image of a wallet.
The second template does not work:
http://localhost:8080/ords/xxx/test_parameter/demo_product_info/10/
fails with error:
mapped request using: BasePathMapper [basePath=/xxx/] to: SCHEMA:apex|XXX
Choosing: oracle.dbtools.http.dispatch.DispatchMetaData as current candidate with score: MetaDataScore [score=0, matchedMethod= GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
, matchedPattern= /test_parameter/demo_product_info/{product_id}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=null, pagination=null, requiresPrivilege=null, transport=null]
methods:
GET: {10299, false}
common: CommonMetaData [accepts=[], cors=null, documentation=null, frameOptions=null, pageSize=10, pagination=NONE, requiresPrivilege=null, transport=null]
stack trace:
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: INT
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
at oracle.dbtools.http.filters.FilterChainImpl.doFilter(FilterChainImpl.java:51)
at oracle.dbtools.http.cors.CORSFilter.doFilter(CORSFilter.java:35)
at oracle.dbtools.http.filters.HttpFilter.doFilter(HttpFilter.java:44)
I changed the add_parameter-call p_param_type => 'INT' to be p_param_type => 'STRING'
then error remains the same and strack trace says
oracle.dbtools.http.errors.InternalServerException: java.lang.IllegalArgumentException: STRING
at oracle.dbtools.http.errors.ErrorPageFilter.internalError(ErrorPageFilter.java:165)
at oracle.dbtools.http.errors.ErrorPageFilter.doFilter(ErrorPageFilter.java:113)
Could you please confirm and fix,
kind regards,
Tom

This is a guess, but I suspect that ords_services.add_parameter() is not required at all.
Also, your URL /demo_product_info/10/ should not have the trailing slash (according to your template URI).
For more information, I suggest you look here:
ords.3.0.0.343.07.58.zip\ords.war\scripts\migrate\core\ords_migrate.plb
The migration package will show what is usually done for templates that already exist within APEX 4.2. I checked my templates and the ones with URI variables {in-curly-brackets} contain no records in apex_040200.wwv_flow_rt$parameters.
-Kris

SSO and success URL with parameters

Hello
I have succeeded to configure HTML_DB engine as Partner App for Oracle SSO.
HTML_DB 1.5.0.00.33
Oracle IAS Release 1 ehk 1.0.2.2.2
I'm entering into HTMLDB application from outside directly to concrete page with concrete parameters. The calling outside app is authenticated with SSO.
Example URL: http://host/pls/DAD/f?p=103:3:::::PAR1,PAR2:VAL1,VAL2
I'm then authenticated checked against SSO and redirected to my requested page, but the parameters are lost. The URL looks like http://host/pls/DAD/f?p=103:3:987698769876098
It only happens at first try. Next time I have a session and I'm redirected together with parametes.
It seams that this http://host/pls/DAD/wwv_flow_custom_auth_sso.process_success is getting somehow wrong parameter URLC. Without parameters. Why?
Please help!
Yours,
jan lakspere

Hi
Thanks, Scott.
This patch 1.5.1 solved this problem. Now SSO redirect forwards the parameters together with URL.
Yours,
jan

Issue with parameter passing in ie7 to php xml

Hi
I wondered if anyone could offer a little advice what the issue is here.
I have a page with xml generated from php in a separte file and presented by a dataset in spry.
The xml is OK and in firefox it all works but ie seems to barf on it.
The situation is this:
I have a jump menu on a front page that provides a url with anumeric parameter passed like this
platforms.php?platform_id=1
This parameter is picked up by php on the platforms.php page using the $_GET Array and is passed into the code in my Spry dataset to the file that runs my query and returns my xml- so basically the page displays a dataset filtered on this parameter id.
It works perfectly in FF.
In IE if I link straight to the page without a parameter at all- so platforms.php the page loads OK using the default parameter I have set up in the top of this page to send the default id of 1 to the code page so the spry query says platform_sql.php?platform_id=1 and the xml generator is fine with thisiel. ie I do a
if(isset($_GET['platform_id'])){
$platform=$_GET['platform_id'];
}else{
$platform=1;
The dataset loads Ok in IE but when I pass a parameter in the url from my jump menu IE gives a blank SPRY table i- it momentarily appears with just the placeholders for my dataset elements then vanishes. The source code of the page shows the correct id was set in the spry data going to my query file.
There is an error in ie saying there is a javascript error but its not any help- in ie fashion- FF shown no such errors.
I thought this might be a data type thing again in the dataset but its not - I have set the elements returned to simple strings but it still does not work.
Is there a problem passing in a parameter like this to a spry dataset?

After about half a day of mucking round I found the problem and a solution to this problem.
What appeared to have happened was that some of the older content in my database used html originally encoded using a WYSWYG editor called ktml.
Later data uses Tiny MCE. It looks like the character set of the two formats is slightly different and as a result some characters rendered incorrectly when passed through XML parsing where it specifies the character set as utf-8.
Firefox on the whole seems to ignore the issue though looking at the raw xml output of my php-xml code- where "-" characters were (dashes) there was a question mark character shown. None the less in actual use on my page the xml was produced and the dataset worked out.
In IE, it barfed at these same characters and failed to return the xml dataset.
What confused the issue more was some of my smaller datasets if they by chance never had a "-" character in rendered OK in IE- hence my default dataset (platform_id=1) worked in IE. After much experimenting I noticed other ids worked too if there was never such a character.
How I got round it was to wrap my server side data in the utf8_encode() function, and now all my xml is clean.
The javascript error being thrown was a red herring though I could not tell until I managed to run my page in ie7 with Visual Studio Express error console running- I had this on a spare machine at work so could debug with it.
All sorted now- now just need to find away to wrap all my datasets in collapsible panels that work.
K

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Opening a url with parameters in an application

I'm able to open a url in a browser from my application, but I want to open a url with parameters.
for instanse http://mypage.asp?parameter=a
You get a file not found. Is this possible?
I'm currently using
Runtime.getRuntime().exec( "cmd /C start " + url);

Found the answer -- you have to put the url in quotes lest the ampersands parse the end off.

Open a discoverer worksheet with parameter

Hi
I'm trying to open discoverer worksheet
If the worksheet have no parameter we can open it with
http://server/discoverer/viewer?cn=connid&event=openWorksheet&wsk=worksheet1
but if i want to open a worksheet with parameter i want to pass the parameterfrom some of the tutrioals i found we can pass parameter like this
http://server/discoverer/viewer?cn=connid&event=openWorksheet&wsk=worksheet1&qp_12=101015
but its redirecting to parameter entring page
can any one find a soultion for this
thanks in advance

Pl do not revive old threads with the same question over and over again - I have locked those threads.
By-passing Oracle Discoverer 10.1.2.48.18 Authentication
Discoverer URL - Hide password without having to use public connection
Adding url parameters to discoverer report
Srini

Clearing device cache regularly with Patch

Hello,
I come from comment on this thread:
http://forums.novell.com/novell-prod...ml#post2070411
It is related to clear the cache on devices regulary, using "Cache orphaning threshold" parameter.
It seems that a cache item only becomes "orphaned" when the bundle is unassigned to the user/device and the "Cache orphaning threshold" value is achieved.
With this design DAU bundles are never deleted from harddisk an fills the workstations and servers disks. Each day a 30Mb files are cached locally on every device.
Can somebody confirm that I'm right ?? Which is the better way to delete the older DAU files on the harddisk ??
Thank you

Hi,
please help, my servers are getting out of space, including my primary servers.
The issue is that DAU files are not deleted from ZAA cache.
Which is the best way to delete these files from de the cache ?? zac cc ?? on primary servers ?? . . .
Thanks

RRI: BEX query to webadress(is SRM ITS base URL with passing value to it)

Dear friends,
I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Hi,
i have replied wrong,
i mean that
when i am trying this,
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID (for drill down on particular field, i.e. open the URL with this field value entred from sender query's field shopping cart number)
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'&GS_HEADER-OBJECT_ID=10000456
and when try this:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID=10000456
but not skiping the initial screen.
Thanks.

Pass WebI dimension multiple values to OpenDocument URL lsM parameter

Hi
Has anyone managed to pass multiple values of WebI dimension object to OpenDocument URL lsM parameter?
My WebI document has 3 objects: Country \[Country\] and Customer \[Customer\] dimensions and Sales Amount measure. WebI report includes a table with 2 columns: Country \[Country\] and Sales Amount. I have built a hyperlink in the Country cells with an OpenDocument URL with lsS parameter = \[Country\] and lsM parameter which should get all context Customers for selected Country as a string (IsM=u201D\[Customer1 Name\], \[Customer2 Name\], \[Customer3 Name\]u201D) .
Using IsM=\[Customer\] forces table to break down by customer which does not help.
I imagine that the solution would be a function similar to count(\[Customer\]) which accepts a dimension as an input parameter and returns a string with concatenated Customer Names.
I have considered WebI extension points (custom functions) option but according to the documentation they do not accept u201Cobjectu201D type as an input parameter.
Any ideas?
Thank you

What is the prolem you are facing if you split the single date param as two parameters say startdate and enddate?
If you pass as single string then you might have to split the same at reciever end.
Are you trying any thing specific?

Cache url with parameter

Similar Messages

Maybe you are looking for