CAF with ABAP Webdynpro and ECC 6.0 ?

Hello,
I'm a newbie with CAF. I understand that we can create business logic (BO) and use kind of UI (VC, Webdynpro).
My question : is it possible to use CAF to generate ABAP Webdynpro and can we use CAF with ECC 6.0 / netweaver 7.0 ?
Regards,
Aurélien
Edited by: Aurélien HENRY on Jan 16, 2008 2:34 AM

Hi intruder,
you can check the sap note 367676.
if helpful rewards points are appreciated

Similar Messages

Configuration of UWL with Abap webdynpro

Hi,
We are doing configuration of UWL with Abap webdynpro. Our purpose to launch Abap webdynpro application , once clicked to a worlitem in UWL iView. we are unable to do due to following errors.
We have done in this way.
1.Created ECC system in EP
2.register the uwl.webflow
3.create ABAP iview(for test purpose still getting error when preview) (N/A)
4.clear cache
4.import xml file
<ItemType name="uwl.task.webflow.TS91000006.UWLECCCLNT530" connector="WebFlowConnector" defaultView="urliview" defaultAction="viewDetail" executionMode="pessimistic">
 <ItemTypeCriteria systemId="UWLECCCLNT530" externalType="TS91000006" connector="WebFlowConnector" />
 <Actions>
 <Action name="launchWebDynProABAP" handler="SAPWebDynproABAPLauncher">
 <Properties>
 <Property name="WebDynproApplication" value="em_wipm_app" />
 <Property name="WebDynproNamespace" value="kgo" />
 <Property name="System" value="UWLECCCLNT530" />
 <Property name="DynamicParameter" value="WI_ID=${item.externalId}" />
 <Property name="display_order_priority" value="5" />
 </Properties>
 <Descriptions default="" />
 </Action>
 </Actions>
 </ItemType>
5.Getting error,when I click task to perform dynpro abap screen.
6.WI_ID not been received.
Plz let me know the solution.
Thanks,

Hello,
I think you have to import the xml-file before clearing the cache again. Your new xml-file needs a higher priority then the default view.
You have just defined a new ItemType in your new xml-file. I am not sure, but I think that you will have to define in this file also a new view for this ItemType. Because otherwise it is not defined how this new ItemType should be shown.
Regards,
Iris

Display SAP's Business Worklplace with Abap WebDynpro

Hi,
is it possible to display SAP's Business Worklplace with Abap WebDynpro ?
There is a customer req. The person would like check his emails etc.
Regards
Alexander

Hello,
You cannot put SAP GUI applications/transactions into a web dynpro component.
But you could build your own custom WD component. It isn't that hard to get the work items from your business workplace to be displayed in a custom application. Check the function modules GETINBOX (or there might be possibly something starting with SAP_WAPI* - SAP_WAPI-starting functions are the standard workflow API functions). Basically you just give for the function the user ID and it will return you the list of items the user is having in his business workplace. Then there are useful functions in SAP_WAPI* to for example display the work item description, etc.
I am not sure how you can get the notifications (="emails") from business workplace, but I would imagine that there is some function you can use similarly and it shouldn't be that hard.
Of course, if you have Portal, you should definately take UWL into account. With UWL you will already have a standard web-enabled workplace (it has basically all the same functionalitites as Business Workplace.) From UWL you can even launch the same SAP GUI transactions that you are currently launching from the tasks in workplace. It is purely an configuration issue.
Regards,
Karri

Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew

Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha

Trigger workflow from ABAP webdynpro and attach an Adobe interactive form

I have a need to create an ABAP Webdynpro that will upload a completed Adobe interactive form and then route the form to multiple approvers thru workflow. I am having trouble finding any documentation or examples of passing the Adobe form in the workflow. Do I have to save the content of every field on the form to an internal table and then have every workitem call an ABAP webdynpro to render the form? Any help or suggestions would be greatly appreciated.

Hi Joyce,
This can be done as follows :
[pdf as an attachment|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60ff6ad3-729b-2b10-6582-fedc82680a29&overridelayout=true]
Regards,
Geet

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

JSON with ABAP webservices and BSP

Hi All,
I am new to JSON,
Could you please provide information related JSON with web services and BSP services.
Thanks in advance,
Rajesh.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Jan 9, 2012

The actual truth is that MVC (controllers) has nothing to do with frames or not.
Look at the problem from the browser side. Here you require a frameset (or you can look at iframes) to achieve what you want. So the browser must call an URL, let us call it default.htm, that will render out the frameset. This default.htm can be a page, a controller with print_string instructions or even a controller that calls a view that prints out the HTML. Personally, I simply use a page.
Default.htm will then have source about like this:
<frameset>
<frame src="applog.do" ... >
<frame src="personaldata.do" ...>
</frameset>
Please check HTML documentation to get <frameset> correct, including things like fixed sizes and scrolling. Also, frameset documents have a different page structure than normal HTML pages, and does not for example have a <body> sequence. Most people make mistakes here. HTML documentation is highly recommended. (There are no tags to render out framesets. You should just write the HTML directly.)
The important aspect here is that we are just using the URLs of the different controllers to load them into the different frames we require. From view of the browser, these are just URLs that will return HTML. Whether pages or controllers+views are executed to generate the HTML makes no difference to the browser.

UME with ABAP AS and LDAP Datasource

Hello SDN´s
We have tried very hard for the last days configuring the ume-xml for the following scenario:
-     LDAP is used to authenticate the user
-     AS ABAP is used to store the roles of the user (because they automatically becomes groups in the portal)
- the portal and the ABAP-system are on different servers
Given facts:
1)     we canu2019t synchronize the roles of the ABAP system to the LDAP
2)     we have to use the open-LDAP for the authentication
3)     DataSources are readonly
4)     User can have similar or different userid´s on the DataSources (Mapping required)
Therefore, we read the user and account information from the LDAP and groups/roles form the ABAP AS.
Result:
a)     user with similar userid on LDAP and ABAP AS: These user were no longer able to log on to the portal
b)     user with different id´s (mapped) on LDAP and ABAP: Can log on
Questions:
-     Is it true that similar userid´s leads to inherent problems of the UME Persistence Manager?
-     Did we set up a wrong config-xml?
-     Is there any other way how we could authenticate to the LDAP and having the Roles of a user read from the ABAP system dynamically?
Thank you very much for your help
Sincerely, A. Hunziker

Hi Andre,
Not sure if my remarks below can help you but I do hope that it can shine you some light.
We have LDAP as our main UME, which is configured in our Portal7.0. This means that security groups created in LDAP are "replicated" into the Portal. We created Portal Roles which are assigned to the security groups created in LDAP. We also use SSO and it was setup via the SPNego Wizard (http://help.sap.com/saphelp_nw70/helpdata/EN/45/40a0de773a7527e10000000a114a6b/frameset.htm). This way, the user only needs to login via Windows and access the Portal without having to login (when users have the same Windows userID as that of their SAP ID). If the users have a different userID between Windows and SAP, then they do a user map under personalization of the Portal.
To connect our Portal to our backend systems, we created a reference system (http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm) and we have our Portal certificates in all backend systems (http://help.sap.com/saphelp_nw70/helpdata/EN/d3/41c8efb31d11d5993800508b6b8b11/frameset.htm).
With the above, users have SSO from Windows to Portal and via the reference system, they can enjoy SSO as well into our backend systems.
Basically we have control what the users can see from the Portal (directly from LDAP security groups with users assigned to that) and what the user can do on backend is still maintain in the backend authorisation setup.
Hope that can help you.
Ray

Multi-Message-split with ABAP mapping and adapter specific attributes

Hi all,
With ABAP-Mapping I split 1 message to n messages.
So many files are generated in file-Adapter.
Everything fine.
But now I want the file names different using adapter specific attributes.
It is not possible to use variable substitution and write the file name in payload because of receiver restrictions.
I tried this with following similar coding in ABAP-Mapping:
data: lt_records TYPE MPP_DYNAMIC_TAB.
 Loop.
 l_file_name = "payload-Inbound"-information
 ls_record-namespace = 'http://sap.com/xi/XI/System/File'.
 ls_record-name = 'FileName'.
 ls_record-value = l_file_name. "l_file_name comes from inbound-payload
 append ls_record to lt_records.
 Endloop.
CALL METHOD dynamic_configuration->set_all_records
 EXPORTING
 records = lt_records.
If I start the interface I see in the monitoring the dynamic configuration with many entries for file-name in the the SOAP-Header mapping of the request message (following extract):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPAADDRESS.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPABROKERROLE.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACOMPANYSEGMENT.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACUSTOMERROLE.XML</SAP:Record>
The result is that all files have the same file name (last entry in dynamic configuration).
Is it possible to write the adapter specific configuration in ABAP-mapping for every single result message??
Thank you for your help,
Florian

Hi Florian,
I've a different idea...I dont think its a "right solution" but just another work around..it involves a BPM...
In your ABAP mapping..set the dynamic config with as many variables as number of different messages...i.e. use the variables like 'FileName1', 'FileName2'...'FileName6' instead of 'FileName'. But use the same namespace 'http://sap.com/xi/XI/System/File'
Call the above mapping in a BPM and capture the individual messages and set the attribute 'FileName' from the values of 'FileName1' to 'FileName6' accordingly using Message Mapping and then send the message using the 'Send' step.
before you try this, try using the variable names 'FileName1' ...'FileName6' in the receiver adapters...enable the ASMS. I know we need to select which variables from the dynamic config to be used by the adapter by specifically selecting 'FileName', 'Directory' etc...but just give it a try and see if it works..
Or..instead of using a BPM..you can combine Henrique's idea...use Adapter module to set the value for 'FileName' from variables 'FileName1'...'FileName6' accordingly.
hope I'm clear..lemme know if you have any questions..
cheers
praveen

SOA Landscape with PI7.1 and ECC

Hello Everybody,
I was reading through few documentation and communication thread but could not able to get the exact answer for the below question.
1. What is SOA Architecture "Technically"?
2. How do we link SOA with PI7.1?
3. What is the procedure to implement SOA?
4. After implementation how we need to link PI7.1, ECC and Portal?
Appreciate your answer or any link specific to above questions.
Thanks,
Dhill

> What is SOA Architecture "Technically"?
SOA is service oriented Architecture. In a simple step think about a web service which is part of SOA.
>How do we link SOA with PI7.1?
Through PI 7.1 you can create, register and host web service for the external systems. So PI 7.1 is considered as SOA middleware.
>3. What is the procedure to implement SOA?
Let us consider hosting webservice through PI. That means you might need to create scenario and use say soap sender adapter. After that you can register webservice using service registry tool and let others to consume your hosted webservice.
>4. After implementation how we need to link PI7.1, ECC and Portal?
Say host webservice using sender interface and soap adaper on the sender side. Use proxy on the receiver side. Provide WSDL to the portal team and let portal team consume your webservice using pi7.1 on the sender. If you create soap(webservice) to proxy scenario(receiver) using PI, you can connect portal to ecc via pi 7.1.
Search SDN forum for these topics.

Preview installation with ABAP, JAVA and EP

Hello all
I repost this topic to mark with the "question star".
I been inactive in the sneak preview area for a few month and I see here in SDN that a lot of new software is ready for download.
I have also read some of the postings from this forum, but I'm not sure what I need to have an installation with both ABAP, JAVA en EP.
Can anyone verify that I need:
1 server for the WAS 6.20 for ABAP
1 server for SAP Enterprise Portal 6.0 SP4 NetWeaver Stack 2 Developer Workplace Sneak Preview for JAVA and EP.
And that I can join the 2 systems via rfc or connectors.
Is it also possible to get a Sneak Preview to Web Dynpro (or is it included in the above) ?
Best regards
Thomas Madsen Nielsen

The combined ABAP and JAVA stack Web AS doesn't support installation of EP on top.
If you want the features of both ABAP and JAVA stack in combination with EP then you will need two WebAS instances, one of those MUST BE Java ONLY!
I suppose you could manually club things together with SDM, but the installation program (SAPinst) in its current form is pretty specific in its checks for a JAVA only Web AS before letting you proceed with EP install.
I have not done a thorough check of the details on why you cannot run EP with Athe ABAP stack, it hasn't been worth the effort of trying....
Nick

Abap WebDynpro and WDY_EXECUTE_IN_PLACE

I have implemented a "standard" ALV report in abap web dynpro...
I use function WDY_EXECUTE_IN_PLACE because I want to run it in SAP GUI.
So far so good.
My simple question:
Can I navigate via a "call transaction" from my dynpro ALV report to e.g ME23N ?
Is there any "form user_command" when I run web dynpro ?

Hi,
Please check the link below-
Regarding Call Transaction?
Regards
Lekha

How to Trigger a Workflow from ABAP Webdynpro

Hi All Gurus,
I have the following urgent requirement, my client is implementing HR and there is a requirement, where is a ABAP Webdynpro component in which we have integrated a Adobe Interactive Form. When the user calls this from through Portal and fills out the relevant data and submits it, a Workflow in the backend ECC system should lauch,
I am not familiar with, this concept although I have worked in Workflow this is the first time I am interfacind with ABAP Webdynpro and Adobe Interactive From.
Can you please let me know in steps what needs to be done to make the workflow trigger for my scenario and also the specific settings to be done in the bacckend.
Regards,
Pratima Jain

Hi,
If you are using HCM Processes and Forms, the Workflow and form are not directly related, thats true.
But the method in the task calls the corresponding webdynpro application which responds to the action triggered by the user in turn to trigger the workflow and update the data in the HR Master Data.
There are 3 layers 1. UI (webdynpro which launches Adobe Interactive form based on ISR Framework)
2. Workflow
3. Backend framework (used for retrieving F4 helps, default values, save data in the infotypes).
for more documentation, please refer it on help.sap.com.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/82/b6b94278560c31e10000000a1550b0/content.htm
hope this helps.
Best Regards,
Saujanya.

ABAP webdynpro with interactive form - launching failure

We are doing some prototype in the solution manager box using ABAP webdynpro and Adobe Interactive Form. I created a webdynpro with a very simple Adobe form embedded in an view.
But when I test the webdynpro, I got the following error page in internet browser, any idea?
Error when processing your request
What has happened?
The URL http://md1as086.medimmune.com:8001/sap/bc/webdynpro/sap/z_wd_bookflight_gebo/ was not called due to an error.
Note
The following error text was processed in the system SMT : WebDynpro Exception: ADS: Request start time: Tue Mar 06 11:53:06 EST 2007(200.101). ?ꯂ.RuntimeProcessor.process(RuntimeProc
The error occurred on the application server MD1AS086_SMT_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMT in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server MD1AS086_SMT_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server MD1AS086_SMT_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: CHEUNGJ -l: E -s: SMT -i: MD1AS086_SMT_01 -w: 0 -d: 20070306 -t: 115305 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi,
Is you ADS Configured ?
Check that out.
Regards
Raja Sekhar

BSP and ABAP webdynpro

Hi wizards,
I am planning to start working on POC (Proof of concept). This requires BSP to be integrated with ABAP webdynpro. Can some throw some light on how this integration can be done. ie sharing the context values between both applications.
regards
Vivek Nidhi.

Well BSP and Web Dynpro ABAP are very different when it comes to internal architecture. Just because they both run in a browser doesn't mean they can be integrated like you describe. You could run both a BSP and Web Dynpro ABAP application in separate frames within the browser; however to the backend server these would be two completely separate processes running in their own memory space.
First of all you couldn't directly share the context values. BSP doesn't even have the concept of a context. You could pass some keys via URL parameters or Server Cookies. You might even be able to pass larger amounts of data. However the eventing becomes a bit of problem. The exception here is if you use the NetWeaver Portal. Then you can use Portal Eventing to pass data and events between the two applications.

CAF with ABAP Webdynpro and ECC 6.0 ?

Similar Messages

Maybe you are looking for