CALC ALL EXCEPT MBR problems

Is there an issue with the CALC ALL EXCEPT MBR command with certain members?I load data to members tagged with a UDA as "Direct Load" which should not be consolidated. The member that is being consolidated has an alias of "SSS" (it is in the accounts dimension and 0 level). I need to load data for each quarter in a year as well as the year itself. But when the calc script runs it overwrites the year member. I have tried the following but they do not work:CALC ALL EXCEPT MBR("SSS"); Result: SSS is still consolidated across the time dimension.CALC ALL EXCEPT MBR(@UDA("Accounts","Direct Load")); Result: Error message: "Invalid Calc Script syntax [CALC ALL EXCEPT MBR(@UDA]"Any ideas? We have Essbase Version 5.0.2 Patch 14. What else can be done to keep my direct loads from adding up across time?

The EXCEPT MBR command excludes any Headcount calculations. It does NOT exclude other calculations such as dimension consolidation.If your Headcount member has a formula, Essbase will not calculate the formula. But it will take the existing values and consolidate them across the other dimensions.You probably have a situation where you do NOT have a formula on Headcount. If that is the case, then you want a calc script similar to this one:calc dim (XYZ);fix (@remove (@idescendants (XYZ), Headcount))calc all except dim (XYZ);endfixWhere XYZ is the dimension that contains the Headcount member.

Similar Messages

CALC ALL EXCEPT

Were using v6.2 and having problems with CALC ALL EXCEPT when combining it with member set functions. If I specify a single member it works fine.CALC ALL EXCEPT MBR("TOTAL OCCUPANCY EXPENSE");But if I specify the descendents, it calculates all dimensions. CALC ALL EXCEPT MBR(@IDESCENDANTS ("TOTAL OCCUPANCY EXPENSE",0)); Looking through the manual, it indicates that it works with member set functions, but I cant seem to get it to work.Maybe Im reading it wrong. But has anybody else had similar problems or got it to work?Thanks in advance.Rod

Hi,Are you using the right function @IDESCENDIANTS? Maybe you would like to use @DESCENDIANTS function, please check.Hope this helps,Grofaty

How to use CALC ALL EXCEPT...

I have some statistics that I don't want aggregated by product. The DBAG says you can do a CALC ALL EXCEPT command but the syntax is not explained very well. I need something like:CALC ALL EXCEPT the member statistics for the dimension All_ProductsI have been doing a calc script to CALC ALL and then to clear out all the parents for ALL_Products for the affected accounts, but it takes a long time.Any suggestions?? Thanks! - Debbie

Depending on your outline it is many times more efficient (time wise)to do a fix ont the members you want (or use a remove list for members you don't want) and do a calc dim of the dimensions that do not have dynamic calc upper level members. also exclude dimensions that don't roll up like scenario. The best use of the Except is when you want to exclude a complete dimensionlike clac all except dim(time);Glenn S.Narratus Solutions

Need help with calc all command..

Hi All,
I have a situation where I need some of the members in accounts dim not be aggregated but some to be aggregated..
so i used.............. calc all except mbr(mbmr_name)
but still i see that the values for this member roll up
can any one help me this
thanks in advance

With knowing all the details, I would suggest maybe creating an alternate hierarchy to provide you another look at aggregate data minus the accounts you are not wanting to aggregate. Just a thought, there are several ways to work this issue......but this is the first I would suggest looking into. If it gets more complicated, then I would explore creating calc script logic utilizing UDA's. Hope this helps.
JC

Exception Handling Problem In BPM

All
I am facing an exception handling problem I am using BPM and , I have caught exception in the transformation step but when there is any data problem in that mapping(mentioned in the transformation)
it is not throwing the exception . is there any option to collect these type of system exception in the bpm and give a alert thru mail
is there any way to collect these type of exception happened in the BPE and raise alert thru generic alert
Thanks
Jayaraman

Hi Jayaraman,
When you say there is any data problem, does that fail the message mapping that you have defined?
If the message mapping used in the tranformation fails, it should raise an exception in the BPM.
Did you test the message mapping using the payload and see if it really fails or not?
Regards,
Ravi Kanth Talagana

SAP VIM Integrated Invoice Cockpit - single default layout variant for all exceptions

Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan

Dear all,
I hope some one has found the solution for this problem we are experiencing in SAP Vendor Invoice Management 600:
For the Integrated Invoice Cockpit ( transaction /OPT/VIM_IIC ) we want to be able to define ONE global layout variant ( available for all users) that is available for all exceptions in the ICC. This so we only have to define and maintain one layout variant centrally.
However this seems not possible: we tried to do so with the transaction /OPT/VIM_EIIC_ADM but it appears that it is only possible to define global layout variants for each exception in the ICC separately ( which is a lot of maintenance work)
Is there a solution available for this ?
Many thanks in advance for your help.
Kind Regards,
Arjan

Upper-level Essbase data gets deleted on running CALC ALL

Hi,
We have a need to aggregate missing values (#Missing) to the parent level and so this is what we did. Go to EAS->Expand Essbase Servers->Expand the concerned application->Right-click on database->Edit->Properties and check the option to "Aggregate missing values". After doing this, we are having a peculiar issue when we execute "CALC ALL". We see that some of our upper-level data (non-level 0 data) gets deleted, and so we have to re-run all our business rules to calculate upper-level data. To be specific, we are having this issue of data going missing in accounting statements/reports such as Balance Sheet/Income Statement. In this reports, the rows are members of Account dimension (Dense) and the columns are members of Company dimension (Sparse). All other dimension are made POV. We did NOT have this problem when the 'Aggregate missing values' option was UNCHECKED. Does CALC ALL work differently when AGGMISS option is ON?
We are using Hyperion Planning, Essbase and Financial Reporting (version 11.1.1.3).
Thanks for any advice.
Regards,
ABG

Hi John,
Now that you mentioned your point about upper-level data, I double-checked the Account dimension members (for which the data was being deleted) and you are right that I am seeing a different behavior than I posted originally. Sorry about that. So this is what I am observing:
The Account dimension has 'Balance Sheet' as one of the children. This member, 'Balance Sheet', has children: Cash, Receivables, Payables so on, and all children of 'Balance Sheet' are level 0 members. Now, we run calculation scripts to calculate the values of these members. These members form the rows of Balance Sheet report. After all the relevant calc script have been executed, I am running a script that has just CALC ALL in it. I am observing that the values of Cash, Receivables, Payables etc (level 0 children of Balance Sheet) are getting deleted when we have the option "Aggregate Missing Values" as checked in EAS.
Then, I inserted SET AGGMISS OFF before CALC ALL in the script and now the values are intact! I am trying to understand why CALC ALL would delete those values when AGGMISS is ON?
You said that most people do not use CALC ALL. What is the better alternative to aggregate the database then? Is it CALC DIM?
Thanks and regards,
ABG

Logging all exceptions

Hi,
I am working on a project where we extend an application built by a third party vendor. I've spent hours trying to determine the cause of some exceptions. The vendor transforms exceptions thrown by the application server or Oracle into their own exceptions. In this process they tend to drop the original cause or message and replace it by a somewhat vague "Database problem probably due to RI violation." not mentioning what constraint caused it. After a long debugging session I managed to figure it out.
I was wondering if I could somehow log all exceptions thrown in the application. I was thinking of some AOP kind of way. Since I don't have the code of the core product classes, I would have to add something at runtime? I believe AspectJ is out of the question since I cannot recompile the vendors code. Spring AOP is out of the question, because I believe it can only add extra behaviour to beans in the application context. We don't use spring at all, so no beans available.
Is there any other way to get to the hidden exceptions or should I just forget about this? I'm going to try to solve some part with jdbc logging first.
Thanks for any input.

garava wrote:
I guess if you don't have the code with you, there is no point in exploring the exceptions. Basically they have already catched them.There actually is a point in exploring them: If Oracle throws an exception "Unique constraint YOUR_UNIQUE_CONSTRAINT violated." and all you see is "There was an exception", then there is a good point in getting that exception information. It could be some parameter that you pass to the system that might cause this problem. The way I did it now was telling the eclipse debugger to break at every exception. I honestly hadn't expected to see that application throw so many internal exceptions!
georgemc wrote:
You could slip your own JDBC driver in between the app and the real JDBC driver, give you a bit more insight into what's going on. Write some classes that implement the basic JDBC interfaces, do some logging or whatever, then pass the calls on to your "real" JDBC driver classes. There's at least one open-source project around that already does this, but I can't remember the name of it off the top of me headThanks George, I might do that if I get enough time for it. I found [this article|http://www.rgagnon.com/javadetails/java-0411.html] where they set a logWriter on a DriverManager. This might be enough to capture the jdbc exceptions.

My iphone 5 has nod sound at all except for with headphones the volume keys says ringer I tried to restart my device and I reset my settings but nothing seems to work it happend to me 2 days ago and yesterday the sound came back for 10 minutes and then go

Hey guys I hope u can help me out, my new 3 months old 16g iPhone 5 has problem
The sound don't work at all except for with headphones, the volume says ringer.
I've tried restarting my device, reset my settings I even tried using a Q-tip in the headphone jack.
Please help me out.
And btw yesterday it worked for like 10 minutes and then got back to no sound.
And this silent mode isn't on.

it's a hardware issue
https://www.google.dk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CC4Q FjAA&url=https%3A%2F%2Fdiscussions.apple.com%2Fthread%2F1343532%3Fstart%3D315%26 tstart%3D0&ei=Wy1hUYiWDs3Y4QSzqIHAAw&usg=AFQjCNHLi5JBEWvjM6SHBge36Or-m1YMEw&sig2 =-By7BjriUmZPDpHDnY_ySw&bvm=bv.44770516,d.bGE
more hits from the search
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=utf-8&oe=utf-8&channel=suggest

A catch-all "exception handler" - what's the end of an stack trace?

I've created an application that is beeing tested these days, and I thought it would be a good idea to implement a "catch-all" exception handler so that I could notify the user when an exception occur (so that he may stop, send me the log, and to prevent errors that occur as a result of the first one).
The way I've started implementing it is I redirect error out to a custom output stream:
public class ConsoleOutStream extends ByteArrayOutputStream {
    private JFrame owner;
    public ConsoleOutStream(JFrame owner) {
        this.owner = owner;
     * Writes <code>len</code> bytes from the specified byte array
     * starting at offset <code>off</code> to this byte array output stream.
     * @param   b     the data.
     * @param   off   the start offset in the data.
     * @param   len   the number of bytes to write.
    public synchronized void write(byte b[], int off, int len) {
        super.write(b, off, len);
        checkForExceptions();
     * Writes the specified byte to this byte array output stream.
     * @param   b   the byte to be written.
    public synchronized void write(int b) {
        super.write(b);
        checkForExceptions();
    private void checkForExceptions() {
        reset();
        if(this.toString().indexOf("xception") != -1) {
            System.out.println("Exception!!\n\n");
            System.out.println(this.toString());
}then i redirect System.err:
PrintStream out = new PrintStream(new ConsoleOutStream(this));
System.setErr(out);
The problem is that the checkForExceptions() method will be called, e.g. 3 times for each exception - and I just want to display an error message to the user once (of course).
Anyone done something similar?

I'm interested in catching all "unhandled errors"how about:
public static void main(String[] args){
    try{
    //whatever you would normally call from main
    }catch (Throwable e){
         System.out.println("There was an unhandled exception:");
         e.printStackTrace();
}

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

My macbook pro recently got swiped and I lost all my data, problem is, just before it was swiped I set up my new iphone 5 which transferred all my photos and music over which is no longer on the computer. What will happen to my phone if I plug it in?

I never used icloud before so there is no data to back up from. I just spoke to the apple store and they said that if I do plug it in, all the data will be swiped....is there a program I can use to transfer my data from my phone to computer without loosing it all ???
Renee

How do I uninstall an application from my Macbook Pro? I have been having all sorts of problems with Adobe products, and need to uninstall so I can re-install them

How do I uninstall an application or software from my Macbook Pro? I have been having all sorts of problems updating Adobe Reader and Flash player on my mac that I need to uninstall them so I can re-install them.

Uninstall Flash
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
For Reader search "unistall adobe reader mac" for the version you are running
https://forums.adobe.com/message/4793407 XI
http://helpx.adobe.com/acrobat/kb/installing-uninstalling-acrobat-x-mac.html X

Best Practice: JavaFX pattern for "Catching all Exceptions"

Hi,
what is on the current JavaFX Standard the best way to catch all Exceptions (centralized) within my JavaFX application...
I read thread outside this Oracle Forum who recommend following:
1. Thread.setDefaultUncaughtExceptionHandler(new MyExceptionHandler());
--> catch all runtime exceptions
2. http://stackoverflow.com/questions/12318861/javafx-2-catching-all-runtime-exceptions
--> Implementing some source code who wrap the current GUI thread...
3. I read something like:
"JavaFX exception handling is almost identical to that in Java, apart from the fact that checked exceptions are handled in the same way as unchecked exceptions. This is good news for most Java programmers moving to JavaFX because you are no longer obliged to catch and handle exceptions."
Sounds very good! But where/how can I do this ???
Edited by: wschele on 19.02.2013 04:58
Edited by: wschele on 19.02.2013 05:16

No recommendation whats the best way to do it?
Catching each Exception in different layers is boring ! :-(

HT201317 iphone not my photos are appearing in the photo stream and it's all enabled what problem?

iphone not my photos are appearing in the photo stream and it's all enabled what problem?

Welcome to the Apple community.
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.

FORALL Exception handling problem

Hi All,
I have one doubt in forall exception handling. I have gone through the SAVE EXCEPTION for bulk collect but i have one more query
BEGIN
FORALL j IN l_tab.first .. l_tab.last
INSERT INTO exception_test
VALUES (l_tab(i));
EXCEPTION
END;
My requirement is when an exception occurs, i ant to print the values of the collection.
e.g. say l_tab (j).emp_number, l_tab (j).emp_id.
How is that possible?
Thanks
Samarth
Edited by: 950810 on Mar 12, 2013 7:28 PM

>
I have one doubt in forall exception handling. I have gone through the SAVE EXCEPTION for bulk collect but i have one more query
BEGIN
FORALL j IN l_tab.first .. l_tab.last
INSERT INTO exception_test
VALUES (l_tab(i));
EXCEPTION
END;
My requirement is when an exception occurs, i ant to print the values of the collection.
e.g. say l_tab (j).emp_number, l_tab (j).emp_id.
How is that possible?
>
Post the code you are using. You didn't post the FORALL that is using SAVE EXCEPTIONS.
The SQL%BULK_EXCEPTIONS associative array that you get has the INDEX of the collection element that caused the exception.
So you need to use those indexes to index into the original collection to get whatever values are in it.
One index from the exception array is:
SQL%BULK_EXCEPTIONS(i).error_index So if your original collection is named 'myCollection' you would reference that collection value as:
myCollection(SQL%BULK_EXCEPTIONS(i).error_index); See 'Handling FORALL Exceptions (%BULK_EXCEPTIONS Attribute)' in the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/tuning.htm#i49099
>
All exceptions raised during the execution are saved in the cursor attribute %BULK_EXCEPTIONS, which stores a collection of records. Each record has two fields:
%BULK_EXCEPTIONS(i).ERROR_INDEX holds the iteration of the FORALL statement during which the exception was raised.
%BULK_EXCEPTIONS(i).ERROR_CODE holds the corresponding Oracle Database error code.
The values stored by %BULK_EXCEPTIONS always refer to the most recently executed FORALL statement. The number of exceptions is saved in %BULK_EXCEPTIONS.COUNT. Its subscripts range from 1 to COUNT.
The individual error messages, or any substitution arguments, are not saved, but the error message text can looked up using ERROR_CODE with SQLERRM as shown in Example 12-9.
You might need to work backward to determine which collection element was used in the iteration that caused an exception. For example, if you use the INDICES OF clause to process a sparse collection, you must step through the elements one by one to find the one corresponding to %BULK_EXCEPTIONS(i).ERROR_INDEX. If you use the VALUES OF clause to process a subset of elements, you must find the element in the index collection whose subscript matches %BULK_EXCEPTIONS(i).ERROR_INDEX, and then use that element's value as the subscript to find the erroneous element in the original collection.

CALC ALL EXCEPT MBR problems

Similar Messages

Maybe you are looking for