Calculate add and subtract to same cell?

I have created a table that has numeric fields in them. I am trying to calculate from two fields and generate result in to one cell. for example, first column cell starts with beginning quantity, second column cell is to type number of quantity to remove from the beginning cell and third column to add to the beginning cell. the calculation should be populated in the fourth column cell. I am able to create add calculation script to fourth cell by just adding — Sum(begin1+add1) — but can’t figure out subtract to the same field.

You are the best Steve!!! Thanks for your help

Similar Messages

  • In Table contol,add and subtract button getting disabled.

    Hi ,
    My requirement is that in table control when user adds  more than four rows,error message will be displayed i.e maximum of 4 rows allowed.
    But after error message is displayed ,add and subtract button is disabled in table control and I am  not able to remove the rows.
    Any solution available on making add and subtract button active.
    Regards
    Nikhil

    Hi
    In PBO,
    module status_100.
    looop at itab with control tc.
    endloop.
    in program
    module status_100.
    describe table itab lines tc-lines.
    if tc-lines = 0.
    tc-lines = 4.
    elseif tc-lines > 1.
    tc-lines = 4.
    endif.
    endmodule.
    here there is no way you will get more than 4 rows at any time.
    instead of Error message you can give warning or information message. this will not disable your buttons.
    Cheerz
    Ram

  • How to zoom in model to add and subtract layer after a degree

    How to zoom in model to add and subtract layer after a degree

    Hi SionReaver.
    Here is a link to the webcam's support page. It includes the user guide and contact information if any issues arise.
    support page
    I hope this helps.
    -- Chauntain
    I work on behalf of HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS THUMBS UP on the left to say “Thanks” for helping! .

  • How do I add and subtract a device

    How do I add and subtract devices.

    Michael, thank you for taking the trouble to reply.
    Yep I can do that, with itunes on the screen putting a new cd in the drives gets a prompt that invites me to add the cd to itunes. Okay so far worked that out fairly early.
    BUT
    The question I asked was how do I now get then get that ONE cd onto my nano.....I do not want to sych everything just that one cd?
    AND
    If I subsequently decide that I want to delete that (or any other) ONE cd from the nano to make room for another....how do I do that?
    .....................In windows media player for instance you can select an option to display only the contents of the mp3 player, then you simply highlight the cd you want delete and delete it....poof by magic it disapears from the device freeing up space.....but the cd remains in windows media player...............Whereas in itunes if you select ....my ipod on the tool bar instead of simply getting a list of what is on that device....you get instead a list of everything that is in itunes.........and if you delete an item it goes from the itunes library but still stays on the nano itself...............crazy
    Itunes seems to me to be totally illogical.

  • Calculate total and average for same key figure

    Hi Experts,
    I have a requirement where I need to calculate total and average for same key figure no of employees.
    eg:                
    If I enter 03,2009 as Input the reuslt should give from financiual year starting to current month.
         11.2008      12.2008     1.2009     2.2009     3.2009        average
             11          10       12       10        10         10.6
             10         10       11       12        10         10.6
    total         21         20       23       22        20          21.2
    we have only one characteristic in rows... companycode.
    Waiting for your Inputs.
    Regards
    Prasad Nannuri

    no it will work for u
    you have to use variable on 0calmonth or fiscal period depending on what Time characteristic u are using.
    lets say that variable is zcalmonth
    it is based on 0calmonth for e.g.
    now u restrict keyfigure with this variable zcalmonth with time char. = 0CALMONTH
    copy and paste the restricted keyfigure
    now set offset for variable in  variable selection screen dialog box = -1
    repeat this until u want
    make this variable mandatory
    now at query execution user will select any value for month/year
    and u will see all 5 months in result set
    now there can be maximum 12 months in a year, so u end up creating only 12 restricted keyfigures.
    use YEAR in restricted keyfigure too, and restrict it with YEAR VARIABLE processing by CUSTOMER EXIT = CURRENT YEAR
    in this case it will automatically removes any additional values...
    for e.e.g
    YEAR = 2008 only
    User entered 6/2008
    so lets say ur financial year starts in  april 2007 and ends in april 2008
    so u expect to see
    4/08
    5/08
    6/08
    but u created 12 restricted keyfigures , so it will show upto
    4,5,6 months only

  • Add and subtract summary group totals

    Looking for a way to add and subtract summary group totals in a report.

    I have my data grouped by account type then summarized.  Example
    have my data grouped by account type then summarized. Example
    acct. type amount
    51 $100
    51 50
    Summary $150
    61 $100
    61 100
    Summary $200
    70 $50
    70 50
    Summary $100
    Formula I want to make this formula 51+61-70 = GP
    I am trying to understand how to put the acct. type(51,61)  in the formula and insert in the report.
    Thanks for the help.
    Raald232

  • Can you open a calculator and add or subtract within a cell?

    I am trying to see if there is a way to use the number pad as a calculator and add figures then enter into a cell for further use.  I want to eliminate the use of my adding machine if possible and just use my keyboard to do my additions and enter directly into my spreadsheet.  Is there a function that opens a calcultor for a cell, do the additions on the keypad, hit enter and have the total put into the cell?

    AG,
    Are you aware that OSX has, built-in, Calculator.app?
    With Calculator.app, you can make your calculations, Command-C to copy the result to the Clipboard, switch to Numbers and Command-V into the target cell.
    Jerry

  • Using variables to add and subtract a number in a text field?

    The adding bit works fine:
    // get this pconn count
    var this_p_conn:Number = Object(this).parent.p_conn;
    // get current pconn total
    var c_this_p_conn:Number = Object(root).part_count.p_conn_count.text    
    // add this pconn count to total pconn
    var v_this_p_conn:Number = Number(this_p_conn+c_this_p_conn);
    // Update total pconn with new value
    Object(root).part_count.p_conn_count.text = String(v_this_p_conn)
    Removing a value from the total is another story, this looks like it should work but it does not:
    // get this pconn count
    var count_p_conn:Number = Object(this).parent.p_conn;
    // get current pconn total
    var total_p_conn:Number = Object(root).part_count.p_conn_count.text;
    // subtract this pconn count from total pconn
    var new_p_conn:Number = Number(total_p_conn-count_p_conn);
    // Update total pconn with new value
    Object(root).part_count.p_conn_count.text = String(new_p_conn);
    Any ideas or suggestions? My eyes are a bit blurry from looking at code, maybe I missed something obvious. Thanks in advance!

    Never mind, I got it worked out now.
    I had the subtraction code firing AFTER my remove self code, so the player never got to fire the subtract code:
    var b:MovieClip = Object(this).parent;
    Object(this).parent.parent.removeChild(b);
    I placed the subtract code before the above code and now it works fine... I think I need powernap...
    The lesson here is that apparently code fires from the top to the bottom, mind the order of how your code is stacked.
    Sorry for the fuss! Carry on.

  • Urgent!!! JText and JButton in same cell of JTable

    Does anyone have an example of a JTable with a cell that allows for text input as well as a JButton for invoking the JFileSystemChooser. I believe this involves adding 2 JComponents to a cell within the JTable.
    An example of this can be seen if you have Visual Cafe. Under Tools, Environment Options, Virtual Machines. If you click in the cell for the VM Executable then click again (Without double-clicking), a JButton appears that when clicked will invoke the FileSystemChooser. Users have the option of either entering text or invoking the chooser.
    thanks

    You can create a TableCellEditor your self that inherits from a JPanel that contains a textfield and a button.
    class MyCellEditor extends JPanel implements TableCellEditor
    JTextField field = new JTextField();
    JButton button = new JButton("...");
    public MyCellEditor()
    // Add a textfield and a jbutton.
    this.setLayout(new BorderLayout());
    this.add(BorderLayout.CENTER, field);
    this.add(BorderLayout.EAST, button);
    // Add listeners
    public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column)
    // Initialize you editor's value.
    field.setText(value.toString());
    // What else?
    return this;
    public Object getCellEditorValue()
    return field.getText();
    // Implements other methods in the interface...
    Hope this helps.

  • How do I add and subtract cd's from my 7th gen nano

    I have used various mp3 players with my windows player succesfully for many years. But for Xmas I was given an ipod nano 7th generation because I wanted to use blue tooth headphones.
    However I find itunes/the device impossible to use and the manual does not cover what I want to know nor does the latest itunes for dummies book I have bought.
    I DO NOT WANT to sync all my music to the device (I have considerably more that 16 gig) so I have chosen the manually insert mode. On set up I managed to synch some music and the device/bluetooth facilty work fine.
    Now all I want to know is how to re-move and add cd's to the device one at a time? This must be possible surely but is not covered in the manuals.
    I have now had the device over a month and still cannot figure out how to do this.
    Itunes is the most unfathomable programme I think I have ever come accross.

    Michael, thank you for taking the trouble to reply.
    Yep I can do that, with itunes on the screen putting a new cd in the drives gets a prompt that invites me to add the cd to itunes. Okay so far worked that out fairly early.
    BUT
    The question I asked was how do I now get then get that ONE cd onto my nano.....I do not want to sych everything just that one cd?
    AND
    If I subsequently decide that I want to delete that (or any other) ONE cd from the nano to make room for another....how do I do that?
    .....................In windows media player for instance you can select an option to display only the contents of the mp3 player, then you simply highlight the cd you want delete and delete it....poof by magic it disapears from the device freeing up space.....but the cd remains in windows media player...............Whereas in itunes if you select ....my ipod on the tool bar instead of simply getting a list of what is on that device....you get instead a list of everything that is in itunes.........and if you delete an item it goes from the itunes library but still stays on the nano itself...............crazy
    Itunes seems to me to be totally illogical.

  • I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

    I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • How do I add space between lines of text in the same cell on Numbers 3.0.1

    I just updated to Mavericks 10.9. In numbers, I used to be able to uncheck a box in the inspector that would make it so the Return key did not move to the next cell, but instead allowed me to add more space between lines of text in the same cell.
    How can I do this in the new version of numbers?

    HI ilb,
    Numbers 3 is a complete rewrite of the application. This preference option hasn't (yet) been included, but N3 is very much a 'work in progress. A word to Apple via Provide Numbers Feedback asking to have this option included in Numbers 3 might be a useful step. You'll find Provide Numbers Feedback in the Numbers menu in Numbers.
    Regards,
    Barry

  • I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote co

    I have a database of names. When I go to the database and pull up names I right click on the option "Open in new tab". I would like to bring up 200 names and do the same function simultaaneously to them like, add a vote to their total individual vote count. Is this possible?

    I ended up reformating the drive as FAT32 because I still need to use it on my Windows 98SE system also. I did have a problem with the allocation size. I wanted to use 512 bytes but it kept failing so I used the default size(8192 bytes) and then it worked fine. I didn't think there would be a problem formatting as NTFS but since you are having problems I just tried it. It failed at 512 bytes allocation size so I tried again using 4096 bytes, the default, as the allocation size and it failed again. It looks like these drives will not format as NTFS.
    Also, I think I figured out what's going on with the ReadyBoost problem. As I said initially it wouldn't work with ReadyBoost then after I had 12GB of data on the drive the ReadyBoost feature started working. After I deleted all the files it quit working again. After doing some reading on the net about Flash drives and ReadyBoost problems it appears that the memory chips on my Lenovo Flash drive are mixed with both fast memory chips that work fine with ReadyBoost and slower memory  chips that are too slow for ReadyBoost. Apparently, after I fill up the portion of memory with data that uses the slow chip(s) then ReadyBoost works fine with the fast chip(s).  I also verified the Flash drives read and write memory speeds using Vista's Event Viewer. To work with ReadyBoost the Flash drive has to read at a minimum of 2.5MB/s (for 4KB random reads) and write at a minimum of  1.75MB/s (for 512KB random writes).
    Let me know what you find out.

  • I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

    I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
    Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
    Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

    PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
    This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
    (see ISO 32000 for what PDF "is")
    What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
    Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
    Be well...

  • How to add text after number in the same cell? "200 units", "3Kg", "17 sqm"

    Dear Sirs,
    I have problem with adding text after a number in the same cell.
    For instance, in excel I am able to do this:
    200 units -----> this is on the same cell. Any number I type, "units" will follow automatically.
    I know that we can just type "200 units" but its in text format so it cannot be calculated supposedly I want to multiply it by others number.
    I know that we can do this by splitting into two cells, one on the left for the number "200" and another one on the right for the text "units".
    It would be helpfull if we could do this function such as "20 years", "3Kg" etc.
    Sorry to trouble you all.
    Thank you
    Q

    This is a case of uneven implementation in Numbers. This sort of functionality is available to format numbers used to label axis ticks on various charts, but not to format numbers in a cell. This feature should be requested.
    As an aside, perhaps a spreadsheet that actually managed numeric units as part of the calculation would be powerful and useful in avoiding formula bugs, something like is available in Google calculations. If you are unfamiliar with this, try one of the following examples typed into any Google search entry field:
    150 miles per gallon in liters per 100 kilometers
    100 * 20 yards / 40 minutes in mph
    Read more at http://www.google.com/intl/en/help/features.html#calculator

Maybe you are looking for