Calculate the days between today and specific day.
I'm trying to calculate the number days between Today and some specific date in the future using SharPoint Designer (XSL). This is what I'm using:
<xsl:value-of select="number(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string(@Due_Date))))- number(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($Today))))" />
e.g. 23 days >>>> 634948416000000000 ticks
This works perfectly while I'm in SPDesigner itself, but once I try to see it in the browser it shows the number of days in "Tick Numbers". Is there a way I can fix this? I've been looking all over the internet and I haven't found any really good answer.
thanks!
Thanks for the quick response Marc.
I've no experience of using momentsJs with SharePoint lists and I need to be able to get this up and running pretty quickly. I guess you need some coding experience to use it?
I'm thinking that there should be a way to do this in SPD with something similar to this from another site, but with the conditions placed on the source field (Planned end Date) instead of the current date.
not((ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Plan_x0020_Ende)))
>=
(ddwrt:DateTimeTick(ddwrt:Today())-(7*24*60*60*1000*10000)))
and
(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Plan_x0020_Ende)))
<=
(ddwrt:DateTimeTick(ddwrt:Today())+(7*24*60*60*1000*10000))))
and
not((ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Ist_x0020_Ende)))
>=
(ddwrt:DateTimeTick(ddwrt:Today())-(7*24*60*60*1000*10000)))
and
(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Ist_x0020_Ende)))
<=
(ddwrt:DateTimeTick(ddwrt:Today())+(7*24*60*60*1000*10000))))
Similar Messages
-
Calculate the variance between quarters and store it in a scenario
Hi,
Can anyone suggets how I can write a rule to calculate the variances between quarters, Qtr1 vs Qtr2, Qtr2 vs Qtr3 etc, and store them in a scenario so that I dont calculatethem on a report ?
Thanks,
IKHi. Why don't you want to do this on the report - it's much easier and you can get favorable/unfavorable comparisons? But, if you want to do the rule, here's the approach.
Create the scenario with QTD as the frequency so you don't have monthly periods
Limit the rule to run just for the scenario and don't run any other rules for the scenario
Use a select case to determine which period (Q1, etc.) is being calc'd to populate variables that contain the source period and year (for going back a year to Q4).
Write the rule to compare data from current quarter in the real scenario to the prior quarter in the real scenario. Something like HS.Exp "A#ALL = A#ALL.S#Actual.P#Jun.W#QTD - A#ALL.S#Actual.P#Mar.W#QTD. But, you may want to adjust this to calculate a favorable/unfavorable variance on the revenue/expense accounts, so you'd need to loop through the accounts and look at the account type.
You'd want to rerun the rule at all value members for both base entities and parent entities. May need to clear all existing data (HS.Clear "A#ALL") in the scenario/year/period/entity/value first.
Do a consolidate all on the scenario to pull the data across and do the math
Have fun, but you really should still with doing the comparison in the reports.
Eric -
How to calculate the difference between intdate and getdate
Hi,
My requirement is to get the data for all the claims where the difference between transactiondate and getdate() should be less than or equal to 7 which means any claims that happened in the past week.
So, my query would be something like this
select * from claims
where transactiondate-getdate < 8
But my transactiondate is in int format such as 20150331 and getdate would be in the format of 2015-03-31. Can someone please help me on how can i achieve the difference between these 2 date formats in the where clause.
Please let me know if you have any questions or if i am unclear.
ThanksHi SqlDev12,
Please find the below condition in your query,hope it would help you
DATEDIFF(DD,CAST(CAST(TransactionDate
AS
VARCHAR)
AS
DATETIME),GETDATE())
< 8
Thanks & Regards,
Praveena. -
MDX - how to calculate the sales between a certain period and the currentmember with a max date
Hi all,
1)I need to calculate the sales between W1 and the currentmember, but the max date should be W20. How can I solve this in MDX?
MEMBER [Measures].[Q1 act.period to date sales] AS
Sum(
[Date invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[1]
[Date invoice].[Bonus calendar - Week].Currentmember
*[CurrentSalesPeriod]
,[Measures].[Sales amount]
This is the measure I have, I need to add the max date is W20.
2)Also, when I calculate the sales between [Date invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[40] and the currentmember, for example being [Date invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[20],
he calculated the sales between this period. However, in theory this is not possible because W20 < 40. Is there any way I can put a constraint on this that he only calculates the sales if the currentmember is > the start period?
Thanks in advance!Y, you can put a check on to determine if currentmember > start period.
Firstly, your period keys are composite of year and period (indicated by the two ampersands in the fully qualified date above). If your period keys were non-composite (eg 201501) it would be a simple matter of
IIF([Date invoice].[Bonus calendar - Week].Currentmember.properties("key") > [Date
invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[1].properties("key"),[Measures].[Sales
amount],null)
There are advantages of having two period attributes on the dimension, one with a fully unique
key and the other with just the period of fy, but that's digressing.
With your composite keys, you could use a calc like the following for the SUM()
Sum(
[Date invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[1]
[Date invoice].[Bonus calendar - Week].Currentmember
*[CurrentSalesPeriod]
,IIF([Date
invoice].[Bonus calendar - Week].Currentmember.parent.properties("key") +[Date
invoice].[Bonus calendar - Week].Currentmember.properties("key") > [Date
invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[1].parent.properties("key")+[Date
invoice].[Bonus calendar - Week].[Bonus week of year].&[2015]&[1].properties("key"),[Measures].[Sales
amount],null))
Richard -
Difference between blueprints and specifications
What is the difference between blueprints and specifications?
I'm not sure about the context of your question, however mechanical drawings and architect's plans used to be produced using 'blueprints', a photographic print in white on a bright blue ground or blue on a white ground. So a blueprint is a plan or drawing.
Putting it in the Java context: According to John Smiley's book 'Learn to Program with Java' published by McGraw-Hill Osborne ISBN 0-07-213189-6, "... a Class is a template or model for the Object which is instantiated from it, just like a house is an object created from an architectural blueprint."
So you can think of a Class as being a sort of template, used to produce Objects.
Perhaps the Specification that you're referring to is the definition of the requirements for the program.
I hope that helps. -
Select just the values between min and max of an accumulated value over day
Hello Forum,
a value is accumulated over a day and over a period of time. Next day the value is reseted and starts again to be accumulated:
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 14 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 34 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 58 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 70 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
select ts, val
from sampledata
order by ts asc;How should I change the select statement to skip all data sets before the first minimum and the duplicates after the maximum of a day in order to get such a result:
TS VAL
09.09.12 06:12 23
09.09.12 07:12 29
09.09.12 08:12 30
09.09.12 09:12 45
09.09.12 10:12 60
09.09.12 11:12 75
09.09.12 12:21 95
09.09.12 13:21 120
09.09.12 14:21 142
10.09.12 06:12 14
10.09.12 07:12 34
10.09.12 08:12 58
10.09.12 09:12 70
10.09.12 10:12 120
10.09.12 11:12 142
10.09.12 12:21 153Thank youThis solution works perfectly when the accumulated value has its low and its high on the same day. But I found out :( , that there is also data, which has its low yesterday and its high today. For a better understandig of the case, there is a machine, wich is working over 3 Shifts with irregular start and end time. For example Shift1 cann start at 5:50 or at 7:15. The accumulated value of the worked time is accumuated for each shift extra. This solution works for the shift 1 (approximate between 06:00-14:00) and for the shift 2(approximate between 14:00-22:00), because there is the low and the high of the accumulated value on the same day. This solution does not work for the shif 3(approximate between 22:00-06:00), because the high of the accumulated value is or can be the next day.
So the thread title should be: "Select just the values between min and max of an accumulated value over the same day(today) or over two successive days (yesterday and today)
Sampledata for shift 1 or shift 2:
{code}
with sampledata as (select to_date('09.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 29 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 30 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 75 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 95 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 120 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 143 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 144 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 147 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 148 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 153 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the expected results:
{code}
1 09.09.2012 06:12:02 23
2 09.09.2012 07:12:03 29
3 09.09.2012 08:12:04 30
4 09.09.2012 09:12:11 45
5 09.09.2012 10:12:12 60
6 09.09.2012 11:12:13 75
7 09.09.2012 12:21:24 95
8 09.09.2012 13:21:26 120
9 09.09.2012 14:21:27 142
10 10.09.2012 06:12:02 143
11 10.09.2012 07:12:03 144
12 10.09.2012 08:12:04 145
13 10.09.2012 09:12:11 146
14 10.09.2012 10:12:12 147
15 10.09.2012 11:12:13 148
16 10.09.2012 12:21:24 153
{code}
And the sampledata for shift 3 is:
{code}
with sampledata as (select to_date('08.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union ALL
select to_date('08.09.2012 02:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 45 val from dual union all
select to_date('08.09.2012 05:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('08.09.2012 06:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 08:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 10:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 12:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 16:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 17:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 19:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 21:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 90 val from dual union all
select to_date('08.09.2012 22:00:12', 'dd.mm.yyyy hh24:mi:ss') ts, 24 val from dual union all
select to_date('08.09.2012 22:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('08.09.2012 23:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 68 val from dual union all
select to_date('09.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 79 val from dual union all
select to_date('09.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 124 val from dual union all
select to_date('09.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 125 val from dual union all
select to_date('09.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 126 val from dual union all
select to_date('09.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 17:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union all
select to_date('09.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 127 val from dual union ALL
select to_date('09.09.2012 22:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 5 val from dual union ALL
select to_date('09.09.2012 22:51:33', 'dd.mm.yyyy hh24:mi:ss') ts, 23 val from dual union all
select to_date('09.09.2012 23:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 40 val from dual union all
select to_date('10.09.2012 00:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 50 val from dual union all
select to_date('10.09.2012 01:03:08', 'dd.mm.yyyy hh24:mi:ss') ts, 60 val from dual union all
select to_date('10.09.2012 02:54:11', 'dd.mm.yyyy hh24:mi:ss') ts, 78 val from dual union all
select to_date('10.09.2012 03:04:08', 'dd.mm.yyyy hh24:mi:ss') ts, 142 val from dual union all
select to_date('10.09.2012 04:04:19', 'dd.mm.yyyy hh24:mi:ss') ts, 145 val from dual union all
select to_date('10.09.2012 05:04:20', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 06:12:02', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 07:12:03', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 08:12:04', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 09:12:11', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 10:12:12', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 11:12:13', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 12:21:24', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 13:21:26', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 14:21:27', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 15:21:30', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 16:21:32', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual union all
select to_date('10.09.2012 21:21:33', 'dd.mm.yyyy hh24:mi:ss') ts, 146 val from dual)
, got_analytics AS
SELECT ts, val
, MIN (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts DESC
) AS min_val_after
, CASE
WHEN ROW_NUMBER () OVER ( PARTITION BY TRUNC (ts)
ORDER BY val
, ts
) = 1
THEN -1 -- Impossibly low val
ELSE LAG (val) OVER ( PARTITION BY TRUNC (ts)
ORDER BY ts
END AS prev_val
, MIN (val) OVER (PARTITION BY TRUNC (ts))
AS low_val_today
, NVL ( LAST_VALUE (val) OVER ( ORDER BY ts
RANGE BETWEEN UNBOUNDED PRECEDING
AND ts - TRUNC (ts) PRECEDING
, -1
) AS last_val_yesterday
FROM sampledata
SELECT ts
, val
FROM got_analytics
WHERE val <= min_val_after
AND val > prev_val
AND ( val > low_val_today
OR val != last_val_yesterday
ORDER BY ts
{code}
with the unexpected results:
{code}
- ts val
1 08.09.2012 00:04:08 23
2 08.09.2012 22:12:13 40
3 08.09.2012 23:21:24 68
4 09.09.2012 22:21:33 5
5 09.09.2012 22:51:33 23
6 09.09.2012 23:21:33 40
7 10.09.2012 00:04:08 50
8 10.09.2012 01:03:08 60
9 10.09.2012 02:54:11 78
10 10.09.2012 03:04:08 142
11 10.09.2012 04:04:19 145
12 10.09.2012 05:04:20 146
{code}
The result should be:
{code}
- ts val
1 08.09.2012 00:04:08 23
2 08.09.2012 02:04:08 45
3 08.09.2012 05:03:08 78
4 08.09.2012 06:54:11 90
5 08.09.2012 22:00:12 24
6 08.09.2012 22:12:13 40
7 08.09.2012 23:21:24 68
8 09.09.2012 01:03:08 79
9 09.09.2012 02:54:11 124
10 09.09.2012 03:04:08 125
11 09.09.2012 04:04:19 126
12 09.09.2012 05:04:20 127
13 09.09.2012 22:21:33 5
14 09.09.2012 22:51:33 23
15 09.09.2012 23:21:33 40
16 10.09.2012 00:04:08 50
17 10.09.2012 01:03:08 60
18 10.09.2012 02:54:11 78
19 10.09.2012 03:04:08 142
20 10.09.2012 04:04:19 145
21 10.09.2012 05:04:20 146
{code}
Thank you for your help! -
How to Calculate the Time Between two days in ABAP
Hi,
I have one scenario like i need to calculate the time between two days please can you suggest me.
Thanks,
HarinathHi Peeleti,
Check this code,
DATA : DATE1 LIKE SY-DATUM VALUE '19830125',
DATE2 LIKE SY-DATUM VALUE '20070219',
DAYS1 TYPE I,
WEEK1 TYPE I,
MONTH1 TYPE I,
YEAR1 TYPE I,
C_YEARS1 TYPE I.
CALL FUNCTION 'HR_99S_INTERVAL_BETWEEN_DATES'
EXPORTING
BEGDA = DATE1
endda = DATE2
TAB_MODE = ' '
IMPORTING
DAYS = DAYS1
C_WEEKS =
C_MONTHS = C_YEARS1
C_YEARS = C_YEARS1
WEEKS = WEEK1
MONTHS = MONTH1
YEARS = YEAR1.
D_MONTHS =
MONTH_TAB =
*WRITE : / 'DAYS = ', DAYS1,
/ 'WEEKS = ',WEEK1,
/ 'MONTHS = ', MONTH1,
/ 'YEARS = ', YEAR1.
Using this code you can calculate the No Of Days Between two dates. Based On days you will easily calculate the Hour. [ No of days * 24 ].
Thanks.
Reward If helpful. -
my on off button on my iPhone isn't working and it has been for several months but i went to the apple store today and the warranty was only 16 days over is it possible to get it fixed for free
If the genius at the Apple Store did not offer repair under warranty then NO
12 months is 12months asume you did not have AppleCare -
Calculate the Difference Between two dates excluding weekends and Holidays
Hi,
We need to calculate the difference between the two dates by excluding the Local public holidays (It is global and varies across countries) and weekends should not be included in calculation for a business day in OBIEE.
We have two dates: Open date and close date when ever close date is null we are calculating age based on taking the current timestamp and need to exclude the weekends and Holidays when ever the close date is null.
Ex:
Col1 col2 Total
11/9/2010 2:46:38 PM Null 13
11/2/2010 8:06:26 PM 11/3/2010 5:37:03 PM 1
(In the Total we shouldn't include the weekends,holidays)
Please let me know how to calculate the difference between two dates by excluding the weekends and holidays.
Thanks
Edited by: user10441472 on Nov 22, 2010 3:14 PMYou already asked this question and I answered it...
Re: calculation of Business day in OBIEE -
Calculate the difference between Creation date and key date
Hello
I want to calculate the difference between creation date of the document with key date(todays date). How can i do that in the query designer. Also then I want to restrict my key figure on this difference if it is =10..please can someone suggest what can be done
thanksHi Grame...
For the days calculation ..
I suggest you to use replacement path ..
I have the reference that you can see the sample. The case of samples is also about day calculation.
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Hopefully it can help you a lot.
Regards,
Niel. -
Hi,
I am new to Labview. This question might be a joke to some of you here, but any help would be greatly appreciated. I have a spreadsheet with time stamps and power outputs from a generator. I am supposed to calculate the difference between consecutive time stamps, which will act as a delay for the next power output update that needs to be sent. For example, lets say that I have to following data:
Time Stamp Power Output
11:00:00 AM 3kW
11:00:02 AM 2.9kW
11:00:04 AM 3.2kW
11:00:06 AM 3.1kW
The above data doesn't make any sense, but it is just for the purpose of this question.
So, I have to read 11:00:00 AM and 3kW initially - 3kW is the initial request thatHello
you can simple subtract one time from the other one and so you get the difference. -> Example
Mike
Attachments:
Unbenannt 2.vi 8 KB -
Hi,
I am new to Labview. This question might be a joke to some of you here, but any help would be greatly appreciated. I have a spreadsheet with time stamps and power outputs from a generator. I am supposed to calculate the difference between consecutive time stamps, which will act as a delay for the next power output update that needs to be sent. For example, lets say that I have to following data:
Time Stamp Power Output
11:00:00 AM 3kW
11:00:02 AM 2.9kW
11:00:04 AM 3.2kW
11:00:06 AM 3.1kW
The above data doesn't make any sense, but it is just for the purpose of this question.
So, I have to read 11:00:00 AM and 3kW initially - 3kW is the initial request that is sent. Then I have toRepeated forum post
Please view http://forums.ni.com/ni/board/message?board.id=170&message.id=294435
Regards,
Juan Galindo
Applications Engineer
National Instruments -
hello everyone,
i'm rai from indonesia
I have a final project about pulse oximetriy, I have some problems,
how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
My program image can be seen below predicament ?
Attachments:
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi 249 KB
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi 249 KBHi rai,
I would appreciate it as kind of respect for forum participants if you would clean up your VI before uploading it (or images of its block diagram)…
That being said:
- Your inner while loops each run exactly twice. Replace them with FOR loops!
- Lots of unneeded operations, mainly induced by ExpressVI usage. Is there a reason to convert to DDT and immediately convert back to 1D array?
- You already calculate some Min/Max values. Ratio is just a division of two values…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
hello everyone,
i'm rai from indonesia
I have a final project about pulse oximetriy, I have some problems,
how to calculate the ratio between the maximum and minimum peaks of the two waves using two while loops to calculate SpO2 ?
My program image can be seen below predicament ?
Attachments:
spo2 akusisi data with filter lpf hpf smoot nilai max min ir merah.vi 249 KBHi Rai,
You should post this into the LabVIEW forum rather than Real-Time since this isn't a Real-Time application. Your post will see more replies in the LabVIEW forum.
As far as your question is concerned, you can write the max and min from the respective loops to a local variable to send the data out of the loops to a third loop or just do the calculation in one of the loops. This would be ideal if you're trying to do this while the loop is running.
-Jayk
Applications Engineering
National Instruments -
How to calculate the difference between two dates?
Hello,
I would like to write some code which figures out how many days are between the Date_of_change (which is of datatype DATE, length 7 and of format DD-MON-YY) and the current date today. Then if the difference between Date_of_change and the current date is greater that 30 days for example then I would like to delete that record from the database.
Thanks
DougSomething like this should work:
SQL> select * from emp order by hiredate ;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7934 MILLER CLERK 7782 21-OCT-2005 1300 10
7902 FORD ANALYST 7566 22-OCT-2005 3000 20
7900 JAMES CLERK 7698 23-OCT-2005 950 30
7876 ADAMS CLERK 7788 24-OCT-2005 1100 20
7844 TURNER SALESMAN 7698 25-OCT-2005 1500 0 30
7839 KING PRESIDENT 26-OCT-2005 5000 10
7788 SCOTT ANALYST 7566 27-OCT-2005 3000 20
7782 CLARK MANAGER 7839 28-OCT-2005 2450 10
7698 BLAKE MANAGER 7839 29-OCT-2005 2850 30
7654 MARTIN SALESMAN 7698 30-OCT-2005 1250 1400 30
7566 JONES MANAGER 7839 31-OCT-2005 2975 20
7521 WARD SALESMAN 7698 01-NOV-2005 1250 500 30
7499 ALLEN SALESMAN 7698 02-NOV-2005 1600 300 30
7369 SMITH CLERK 7902 03-NOV-2005 800 20
14 rows selected.
SQL> delete from emp where hiredate < sysdate - 30 ;
10 rows deleted.
SQL> select * from emp order by hiredate ;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7566 JONES MANAGER 7839 31-OCT-2005 2975 20
7521 WARD SALESMAN 7698 01-NOV-2005 1250 500 30
7499 ALLEN SALESMAN 7698 02-NOV-2005 1600 300 30
7369 SMITH CLERK 7902 03-NOV-2005 800 20
4 rows selected.
SQL>
Maybe you are looking for
-
My itunes wont let me authorise my account for my apps?
i have authorised three computers and got a new computer for christmas but with the others deleted/ deauthorised i now cannot authroise this one help!!
-
Hi, I am triyng to upgrade Hyperion classic applications from 11.1.2.1 and 11.1.2.2 to 11.1.2.3. I restored application's databases which has SQL database and upgraded applications successfully. But the other applications that have Oracle databases,
-
So my itunes keeps freezing every time I bring it up, it starts to load the itunes store and then just freezes. No error message, no nothing. This is the first time ive posted a question thing like this... cause ive tryed so many things to fix my itu
-
Import an AE project and have the imported project update automatically
I have a created a separate project for titles we are using to describe our entertainers. "Comedy Legend, Acoustic ...etc." As there are two designers on our team, we would both like to add to this composition and have it update when we pull it into
-
Balance Sheet and Income Statement
Hi Guys, Assets and Expense (AST and EXP) are stored as +ive in the system Liabilities and Income (LEQ and INC) are stored as -ive in the BI system. But I see all positive values in the Input schedule. Sometimes in Reports I see -ive values. Is it li