Calculation fields need to hide $0 and 0% fields when null

Adobe Live Cycle Designer 8.0
I have my Before DIR% calculated by dividing (TotalDebts/TotalIncome*100) and have it show up as a percentage (ie 26% OR  31% instead of .26 or .31). I need it to show up blank if there isnt anything going on. Same for "After DIR" and "% Unsec to Inc". I also have another from with the same exact problem but it calculates a $0. How would make these 0's show up blank when no calculation is currenlty happening?  I am trying to get them to show up as blank so if needed I could print out the form and hand write it and NOT have the 0% show up.

If you set the Pattern display on the calculated cell to allow zeros and/or null then if both of the numericFields are 0, then the calculated cell is blank; not 0. Just select the calculated cell that has the 0, then in the Object tab select the Field tab, and there should be a "Patterns" button you can click. Select "Display" from the drop down box after hitting "Patterns", and then check the fields "Allow Empty" and/or "Allow Zero". Should not display the 0 once you have those set.

Similar Messages

  • Auto Populate Drop Down and Text Fields from Other Drop Down and Text Fields

    Hi everyone
    I'm trying to pre populate a "Proposed Employment Status" drop down field with the selection from the "Current Employment Status" drop down field and allowing users to select another option if the proposed employment has changed. If it hasn't it would just remain as populated by the Current Employment Status" entry.
    I'm also trying to do this with text fields eg "Proposed Position Title" is populated with "Current Position Title". If the title changes in the bew employment arrangements users can enter it over the Proposed Position Title that is presented when the Current Position Title is entered.
    I can get it to work if the drop down or text field names are the same, but this doesnt solve the problem.
    Any ideas
    Regards,
    Michael

    Java is a full featured-language and you shouldn't have any problem doing the mathematics, etc.
    As far as the rest, Studio Creator is a relatively easy way to create the user interface that you describe. If supports drop-down selectable lists and standard form capabilities. A Web Application architecture would appear to be ideally suited to what you describe, and this is supported by SC. Be aware that this would require a server to serve the application to the client computer.
    If the server is a problem you could consider an applet that would be downloaded from a website, and then run entirely on the client computer. But the first approach is better.

  • How can I re-arrange the items under "Bookmarks" i.e. put "SAVED PAGES" ON THE TOP INSTEAD OF NEAR THE BOTTOM. I ONLY NEED "BOOKMARK THIS PAGE" AND "SAVED PAGES" WHEN I CLICK ON BOOKMARKS. The rest are unnecessary for the most part..............Jim

    Read troubleshooting info below............and Question above

    App tabs are special tabs and are always displayed at the left end of the tab bar.
    You can place all bookmarks that you want to see on the Bookmarks Toolbar in the Bookmarks Toolbar folder.<br />
    You can do that in the side bar or the Bookmarks manager if you can't do it on the Bookmarks Toolbar.<br />
    Most Visited is a special (smart) folder that shows websites that you've visited and that aren't necessarily bookmarks, so you can't drag them on the bookmarks toolbar unless you first bookmark them. You can do that by opening them in a tab and clicking the star on the location bar twice and choose the Bookmarks Toolbar as the destination folder.
    *https://support.mozilla.com/kb/how-do-i-use-bookmarks

  • Is there a way to hide pages and show them when selected in a combo box?

    I'm creating a document that has different forms for different states.  Ideally, I would like to select a state from a drop down and then show the corresponding form(s) associated with that state.  Anyway to do it in Acrobat 9.0 Pro?

    Don't templates only work as spawning several copies of the same form?
    Or you can just have certain information spawn to locations on various
    other forms?
    Sincerely,
    Jim S. Tsao     
    Network Services Manager
                -Northern Division, Atlanta, & Greensboro
    Phone: (973) 630-0769
    Mobile: (201) 575-3149
    Email: [email protected]

  • My phone needs to be restored and wont work when plugged into computer..help!!

    I recently had water damage and dried the phone out. Now it will not turn on unless plugged into wall outlet and it tells me to restore with itunes...I go to plug into computer and does not work...why is this?

    How can you not know your Apple ID?
    You can recover it at https://iforgot.apple.com/appleid
    If you can not recover it there, you will have to call AppleCare and speak to someone in account security.

  • Hide Navigation and Menu bars when playing Captivate HTML

    This is probably a beginner question, but what can you do to have your Captivate output play in a browser window that has the menu and navigation bars hidden?  We want users to have the course play in a window that only displays the captivate SWF with the internal menu controls.  As part of this we'd like to have the window open to the exact size of the SWF file.
    If anyone can help with this, I would appreciate it.

    Hello again
    I've seen JavaScripts that allow sizing and placing a window, but if you wish to remove the chrome elements such as the Menu bar, Toolbars and such there is no way to do that from inside the window you are in. It has to be scripted when creating a new window.
    It's a browser security thing. If you could turn these features off from inside the browser you are in, folks that wanted to have their way with your internet experience could trap you in a site and not allow a means of escape!
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • RERAPP and reference field

    Hi,
    does anyone know how SAP determines the Reference field (XBLNR) when generating vendor open items via Periodic posting run RERAPP?
    Is there any possibility to define a certain reference by the user?
    Thanks,
    Sonja

    Hi,
    The reference table and reference field are the fields which specify the currency key or Unit of Measure. Suppose if the user specifies a currency amount say 1000$, the currency amount field would indicate the amount 1000 and the currency key indicates that the currency specified is in Dollars.
    A reference field is needed for all currency and quantity fields as the figures in this field need a currency or unit. If you have no reference field and table for fields of this kind you will get a syntax error. This syntactic constraint reflects a semantic fact: A figure in a field does not tell you a lot if you do not know to which quantities or currencies the figure is related: It does not suffice to know that you have, for example, five items, but you need to know if you have five meters, five Euros, five pound etc. And this information is provided the reference field and table.
    Reference: http://www.sap-abap4.com/abap/qa-sap-abap-dictionary-23/
    <REMOVED BY MODERATOR>
    regards,
    Ramya
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:58 PM

  • Hide Preferences and Help link

    Need to hide Preferences and Help link from iSupplier page
    Login to iSupplier Portal as a supplier user
    - Select any iSupplier responsibility
    - The Preferences and Help link is available at the top right of the screen
    Our Help contains internal specific information that should not be exposed to external parties.
    ### List the Securing Attributes assigned to both the user and the responsibility ###
    ICX_SUPPLIER_ORG_ID
    ICX_SUPPLIER_SITE_ID
    ICX_SUPPLIER_CONTACT_ID

    Hi ,
    Please share at what level ,u need to hide this link ,these are global buttons ,they can be hidden either through controller extension or can be hidden in menu option .
    thanx
    Pratap

  • System and Query field disable in Data Manager for Netweaver BI

    Dear All.
    i have installed Xcelsius Engage Server 2008, when i try to add connection for SAP Netweaver BI from the Data Manager the dialog appears correctly but in Defination TAB only the Name field is enable both System and Query field is disable.
    without that how can i configure the connection please let me know how to fix this issue.
    Kind regards,

    Hi,
    You give the name of the connection and then click on "Browse".  It will then prompt you to connect to the desired system.  Log in and then select the appropriate query you want to build a dashboard on.
    Hope this helps.
    Regards,
    RashmiG

  • AR Receipts On Account and Unapplied fields

    Hi All
    Can you please help me finding out what are the database field names for On Account and Unapplied fields in AR receipts form and in which table these two fields reside?
    Please let me know asap on the same.
    Appreciate your time on this in advance.
    Regds
    Mano

    Hello.
    Have a look to AR_RECEIPT_AMOUNTS_V view where you can see what you are looking for in a simplified manner.
    Octavio

  • Having one field display the text of a different field in a statis form

    Hi All--
    My goal is to pull back a single value and display it in two fields, using a static form and formhandler. When a co-worker had both fields with the binding used to retrieve the value, he found that the population for the field was getting garbled, and not displaying what we needed or had pointed at. My proposed solution is to retrieve the data once using a binding, then have the 2nd field populate basedon what content is in the first... but I don't know how to do this. Any assistance would, as always, be appreciated. Thanks!

    Certainly binding two fields to a single value in the data is acceptable. I have done that many times without issue. Can you try it and verify that you are having an issue? If it is still happening can you provide the template and a sample data file?
    Paul

  • Field validation - make field required based on value of another field

    Hi,
    I tried to enter the field validation into both LeadSource and stSource_Detail field, however, when the LeadSource is not "Customer" or "Staff" and Source Detail is not empty, the validation message will prompt. Below is my field validation:
    IIf(([<LeadSource>]=LookupValue("OCCAM_LEAD_SOURCE", "Customer") OR [<LeadSource>]=LookupValue("OCCAM_LEAD_SOURCE", "Staff")) AND [<stSource_Detail_Staff_ID__Customer_ID_ITAG>] IS NULL,N,[<stSource_Detail_Staff_ID__Customer_ID_ITAG>])

    Field Validation statements must return only TRUE or FALSE. Rewrite your statement such that if your condition is valid, true is returned, and if not, false is returned.
    Thom

  • Functions in Calculation and Summary Fields

    Hi,
    I'll give a bit of background to my situation before describing the advice I'm looking for here.
    I am experienced Mac user and I have used AW a fair bit in the past, but since I've been working in a job which has Windows machines and uses a complex custom-written relational database for its main tool, I use it less often than I did, so I am a little rusty. It is the shortcomings of the complex relational database (which I do not have admin rights to) that has led me back to AW and its database module.
    Essentially, I am a complaints investigator, and the relational database provided by my employer is used to keep track of correspondence and various metadata associated with the investigation of the complaint. However, although it is called a Complaints Management System (CMS), it does not help me manage my caseload very well. I've previously tried to create an Excel spreadsheet that would help me manage my work, but it is not a database (or I am not sufficiently skilled with Excel) and I cannot get it to provide me with what I want.
    So, my problems.
    I have complaints (cases) assigned to me to investigate. These cases have differing priorities, which means differing time limits for completion of the investigation. The priorities and time limits are set out below:
    J (jurisdictional issues) - time limit = 1 month
    D (discretion not to investigate) - time limit = 3 months
    1 - time limit = 4 months
    2 - time limit = 6 months
    3 - time limit = 12 months
    The priority field in my AW DB is currently a 'pop-up menu' field, but I could change this to another type if this would be advisable.
    I have a date-type field in which I enter the date the complaint was received. I have an calculation-type field in which I calculate the age of the complaint using the function:
    =(NOW()-'DateReceived')
    This returns an age in days, which I input into a separate calculation field that divides the result of 'age in days' by 30, to give a rough approximation of the number of months old the complaint is (If AW has an equivalent to Excel's 'workdays' variable, I'd love to hear about it). This latter field is the one that I display in the main data entry view of the database.
    Given the priority assigned to the complaint, and the age of it, I am either 'On Target' or 'Over Target' for completing the investigation.
    Each month I have a meeting with my manager to review progress, and since the reports that can be extracted from the CMS are not very useful for this purpose, I want my AW database to help me generate reports that can form the basis of discussion in these meetings.
    Part A of My Query
    At present, I have a manually operated field, in the form of a pop-up menu, to indicate for each record (complaint) whether I am over or on target for completion of the investigation. I would like to make this a calculated field, so that the database keeps track of this for me automatically. Unfortunately, I'm either too dense, or not good enough with the syntax of AW functions, to be able to write a function which essentially does the following:
    IF 'Priority'=1 AND 'Age in Months'<4 THEN 'On Target' ELSE 'Over Target'
    - and then repeats that for the other priority possibilities.  It seems likely that the 'IF' function is what I'm after, but I haven't been able to get the syntax right to combine 'Priority' and 'Age in Months' in the format spelt out in the AW help, which is:
    =IF(logical,true value,false value)
    Getting the syntax of one part of this function right would be a good start. However, I suspect that I have a larger problem, in that I have 5 priorities to measure against and I need the overall calculation (that produces the 'On Target' or 'Over Target' results) to report in one result field. This means nesting the functions that look at the 5 priorities and 5 age limits. I've tried and failed to get the syntax of such nesting right, so advice on this is doubly welcome.
    Unfortunately, I have a sneaking suspicion that unless the answer is much more concise than I imagine it to be, there will be an additional problem: AW appears to have a character limit for the length of a function string in a calculation field which may be too short for my needs.  If you think this is an issue but that it can be solved through the use of intermediate fields (which don't need to be displayed in the main 'data entry' layout), I'm happy to give that a shot.
    Part B of my Query
    Even if the problem above cannot be solved, and I have to manually enter whether a complaint is 'On Target' or 'Over Target', I have a separate but related question for the reports I have to present to my manager.
    On these reports, I would like to have a summary at the top of the first page (in a grand-summary part, I assume) which gives a count of how many complaints are 'On Target' or 'Over Target' for each priority. Below that is a sub-summary part, ordered by the type of action that must next be taken in the investigation. (Getting that right may be a subject of a separate post at a later date.) The report must, of course, only report on those complaints that are still being investigated ('open complaints') and not those which have been completed ('closed complaints'). So, I need a function in a summary field which will present an accurate count of the number of open complaints that are 'on target' for priority J (with separate summary fields that do the same thing for priorities D, 1, 2, and 3), and a separate set of summary fields that will present a count of open complaints that are 'over target' for each type of priority.
    It might look a bit like this table below, with figures from the summary fields populating the cells in the third row:
    Priority
    J
    D
    1
    2
    3
    In / Out of Target
    In
    Out
    In
    Out
    In
    Out
    In
    Out
    In
    Out
    Number of Complaints
    My guess is that it is easier to have the summary field simply count all the complaints that are on or over target for a given priority, regardless of whether they are open or closed, since the report could be based on a saved search (match) which strips out all closed complaints. But if I'm off-beam with that idea, I'm happy to have another way of cracking this nut.
    Many thanks in advance to any Community members that take the time to try and help me with this.
    Andrew
    PS Cross posted in AWUG forum too, if people prefer to answer there.

    Hi Andrew,
    Part A:
    I've done some restating of the question, and distributed the calculations among several fields, not all of which need to be included on the visible layout. Other than formatting the Date fields and moving the 'Completed Date' field and its label, I've left this in the default "Layout 1" produced by AppleWorks.
    Field List:
    Priority: Popup menu with six items: 00, J, D, 1, 2, 3  Defaults to 00
    TL (time limit in months): Calculation:  CHOOSE('Priority',0,1,3,4,6,12)
    Received: Date. Option: Automatically insert today's date (ie. Date Record created) (may be edited)
    Target Date: Calculation:
    DATE(YEAR('Received')+INT(MONTH('Received')+'TL')/12,MOD(MONTH('Received')+'TL', 12),DAY('Received'))
    Remaining (Days): Calculation: INT('Target Date'+1-NOW())  (see revision below)
    Completed: Checkbox. Set default value to Unchecked.
    Completed Date: Date: Entered manually
    OnTarget: Calculation: IF('Completed',IF('Completed Date'<'Target Date',"On Target","Over"),IF(INT(NOW())>'Target Date',"Over","On Target"))
    The On Target field shows the current status of the case while still open, and the state on the closing date when it was closed.
    Having done that, I was unhappy with the Remaining field continuing to calculate an ever larger negative number after the case had been closed. Hence this revision below:
    Remaining: Calculation: IF('Completed','Target Date'-'Completed Date',INT('Target Date'+1-NOW()))
    Shows the number of days remaining while the case is open, the days remaining at completion if the case has been marked Completed and the completion date entered.
    Rsults (and some further formatting of the Layout) below.
    Part B:
    You will need Subsummary parts when sorted on Completed and on On Target. Fields can appear on  a Layout only once, so each subsummary part will need a separate Summary type field for each field to be summarized.
    Regards,
    Barry

  • Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

    Hi All,
    Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
    I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
    IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
    Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either  "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
    Please advise or help me .
    Thanks in advance!
    Regards,
    Praveen

    Hi
    The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
    Anyway, you first need to make the field as optional for example, before you move.
    One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
    regards
    Sidi

Maybe you are looking for