Calculation in Pivot..

Hi
I have a query.. for calculation of % in pivot,
SNo|Sub|Total|Lang1|Lang2|%Lang1|%Lang2
1 |AB|180 | 90 |90 | 50% | 50%
1 |AB|180 | 90 |45 | 50% | 25%
I have the columns SNo,Sub,Total,Lang1 and Lang2 columns in Pivot, i am not able to calculate for *%lang1 and %lang2.* These are % of marks in total marks for each,
Any help pls
Thanks in advance..
Thanks!

Hi user,
Percentages can be difficult in OBIEE. The best way to get predictable results is to setup your percentage calculation in the RPD.
Here's a quick high level of how to accomplish this:
1) Create a logical column called Sum Lang1
2) In the data type tab, go into the physical table and set the formula to Case statement of Lang1
3) Set the aggregation to SUM in the aggregation tab
4) Go to the content tab and set the aggregation level to SNo of your dimension
5) Create a logical column called Sum Total
6) In the data type tab, go into the physical table and set the formula to Case statement of Total
7) Set the aggregation to SUM in the aggregation tab
8) Go to the content tab and set the aggregation level to SNo of your dimension
9) Create a new logical column called % Lang1
10) In the general tab, check the box to base this calculation off of other logical columns
11) Setup the formula to: (Sum Lang1/Sum Total)*100.00
12) Bring this column to the presentation layer and use it in your report.
Give this a shot.
Best regards,
-Joe

Similar Messages

Percentage calculation in pivot table per row

Hello all,
I do calculate two fields in a pivot table. First calculated field is the # of activities per user (standard SoD reporting field). Second calculated field is the # of activities per user with a certain classification (customized pick list field that is converted in a from a text value to a integer value ==> CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END).
In the pivot table I do show both vlaues as a sum. I would like to calculate the percentage per row per user.
Example:
User - # activities - # calls - percentage
User XY - 80 - 40 - 50%
Thanxs for your help
Elmar

have you # Call column look like
sum(CASE WHEN Activity.Type = 'Call' THEN 1 ELSE 0 END) -- column2
create the percentage column with # activities / column2
under the column property of the percentage column --> Data Format -->Treat Numbers As --> percentage.
leave the Aggregation Role as default on all columns.
Hopefully, I didn't miss anything.
Shilei

Row Based Calculations - Pivot Table

Hi,
Can anyone help with creating calculating items in a pivot table. I have been following this example:
http://obiee101.blogspot.com/2009/01/obiee-rowbased-calculations-in-pivot.html
I have created a calculation item on the column of my pivot table(month_name), only selecting Sep & Oct:
Function: Formula
(Sep+Oct)
This returns 1 for all rows in the pivot table, these months do contain numeric values and there is a page item based on year.
Can anyone help?
Thanks

Hi,
Lets consider you are having only 3 columns.
One in rows,other in columns(your month column and measure column in measures section.Then if you re using Calculated item in column section ie. on your month column,writing a formula as (Oct-06)+(Nov-06)+(Dec-06) with Name Grand Total.It will return only one column Grand Total with sum of all the months you gave across the rows.
Regards,
Srikanth

Problem in pivot table view

Hello gurus,
I need a help in pivot table view. In pivot table, I have to show measure in accordance to month. For example show sales as per region by month name.
Region               Sales
          Jan     Feb     Mar     Apr …………..Dec     Avg     Total
A          10     40     92     92          32     xxx     xxx
B          73     83     39     78          87     xxx     xxx
So this is what I have to do. I am able to do this with one measure with created new calculated item. Now I have to create this report using two measures and the in the new measure I have to show only average and total.
For example
Region               Sales                              Target
          Jan     Feb     ………Dec     Avg     Total Avg Total
A          10     40          32     xxx     xxx          xxx          xxx
B          73     83          87     xxx     xxx          xxx          xxx
Here sales and target are two different measures. The problem is when I add target column in measures; it will show all the month which I don’t require at all because I need all the month for sales only and for target I just need average and total. I try from head to toe but not getting any thing like this.Can i do this using other view if possible.
Help me guys. If you need more explanation then please let me know.
Thanks
Regards,
Suhel

Anybody replies please.....
Is this possible that we can use Calculated column in other calculation in pivot table. For example, total of one measure divided by total of another measure in pivot table.
Regards,
Suhail

Make the data fit in 1 or 2 pages in Rpt as per the data selection- Hyp IR

Hi,
Request to provide me solution for the following issue at the earliest :
On dashboard I'll have 3 dropdowns drp1,drp2,drp3 and 3 list boxes lb1,lb2,lb3. User selects value from drp1 and selected value can be placed in lb1 thru "=>" button. So any no. of values (less or more values) can be placed in lb1 selected from drp1. Similarly values selected from drp2 placed in lb2 and values selected from drp3 in lb3 thru "=>" buttons.
After selecting process button I have to place the list box (lb1,lb2,lb3) values (Text) in Text Labels (tlb1,tlb2,tlb3) on the Report. First part of the report contains Pivot with some calculations. Pivot will increase or decrease horizontally. Vertically its size is fixed. Down the pivot, Text Labels tlb1,tlb2,tlb3 are placed down the other. Spring option has been used for tlb1,tlb2,tlb3.
Now issue I am facing is If user selects more values from drp1,drp2,drp3 then in report tlb1,tlb2,tlb3 are expanding and I am getting the report with 2 pages. After that if user selcts less values from drp1,drp2,drp3 then the data selected getting fitted in single page of report but the 2nd page previously expanded remains exist. But user should not get this 2nd page blank. I tried to apply report grouping . But didn't worked.
Please suggest me solution for this problem. Can I achieve this requirement if I use any other controls instead of text labels in Report ( less values single page more values 2 pages). Thanks.

Thanks Eric for the response.
Our requirement is, in a Production instance, not to allow a DB user (APPS/SYSTEM) to see the confidential data. For example, a user who has the APPS schema password should not be able to see the salary details. However allowing the application like forms/reports/jsp to present the actual data and not the masked data.
I understand from your reply that the data masking feature CANNOT be used for this purpose as it is rebiulding the tables with the masked data. However we understand that the same feature can be used in a TEST/DEV environment so that we can restrict the developer who is working on the TEST/DEV instance, from accessing the confidential data.
Any pointers to acheive our requirement will be highly helpful.
Thanks for your time.
Ramana.

TopN and rest binning for % values - please help

I am trying to create a report like the below:
Dim attribute <-> Value <-> show data as %
a 10 x%
b 20 y%
c 30 x%
d 40
I created a report with one attribute and measure "show data as % of" in pivot which is working fine. Now I need to display report if user selects "top 5" then top 5 values based on their %, and group rest of the values into "others" bucket.
I did followed couple of blogs:
http://obiee101.blogspot.com/2009/08/obiee-topn-versus-rest.html
http://total-bi.com/2010/10/obiee-topn-versus-the-rest/
But those blogs shows a straight value but not % value which gets calculated in pivot view.
Please provide any inputs or suggestions on how I can achieve this.
Many thanks in adv.

any ideas? thanks.

Total based on selected rows

Hi,
I have a column called record type and I would like to sub-total based on
selected rows from the record type at the bottom. how do I do it ?
for ex:
rtype load
s - 100
b - 150
r - 200
z - 10
total load1 b+r - 350
total load2 b+z - 160
------------------------------------------

You can use calculations in pivot tables to operate with distinct values of a column. You can create a new column (or row) as 'b' + 'r' record types. You can select wether to see original and total columns or only totals.
See 'Examples of Calculations in Oracle BI Pivot Tables' section in "Oracle® Business Intelligence Answers, Delivers, and Interactive Dashboards User Guide" document.

IF statement in Calculated Field for Share point, doesnt calculate sum in my Excel Pivot table.

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Hi Everyone
I used this in SP calculated column field.
=IF([Shift Sched]="1pm to 10pm","0",IF([Shift Sched]="2pm to 11pm","1",IF([Shift Sched]="3pm to 12am","2",IF([Shift Sched]="4pm to 1am","3",IF([Shift Sched]="5pm to 2am","4",IF([Shift
Sched]="6pm to 3am","5",IF([Shift Sched]="7pm to 4am","6",IF([Shift Sched]="8pm to 5am","7",IF([Shift Sched]="9pm to 6am","8",IF([Shift Sched]="10pm to 7am","8",IF([Shift
Sched]="11pm to 8am","7",IF([Shift Sched]="12pm to 9am","6",IF([Shift Sched]="1am to 10am","5",IF([Shift Sched]="2am to 11am","4",IF([Shift Sched]="3am to 12pm","3",IF([Shift
Sched]="4am to 1pm","2",IF([Shift Sched]="5am to 2pm","1",IF([Shift Sched]="6am to 3pm","0",IF([Shift Sched]="7am to 4pm","0",IF([Shift Sched]="8am to 5pm","0",IF([Shift
Sched]="9am to 6pm","0",IF([Shift Sched]="10am to 7pm","0",IF([Shift Sched]="11am to 8pm","0",IF([Shift Sched]="12pm to 9pm","0"))))))))))))))))))))))))
it was able to work fine however my issue is when i extract the information to excel and use a pivot table the table is not able to calulate the sum of the value for this field. Can you please help me with this. this is for an Attendance traker for Night
Differential pay for employees. they create a daily log of their shift schedule and if i summarize this in pivot the value in the calculated field for this is not getting the sum.
Thanks,
Norman

Sorting on a total column or calculated column in a pivot table

We have a pivot table showing customer activity by month. We have added a calculated field to show the YTD average instead of a total column. Is there a way to sort on this calculated field? We have applied a sort on the measure in the criteria, and our resulting pivot table sorts by the values in the most recent month, not by the YTD average.

I think we cant sort when we use a pivot view becoz all the rows are already fixed. Say your rows are sales and volume and columns are year 2007 and 2008, imagine if you r given the sorting ability then if number of units solds is more then it need to change the rows (but in pivot table rows are fixed). So, we cant sort in pivot tables!!

Calculated Field is Disable while using PowerPivot to access multiple sheet column in a single pivot,

Hi,
I am trying to add a calculated field in my power pivot table to show the percentage on the basis of 2 columns, please let me know why this is not appearing and how can i fix it.
Any other way if i can add a calculated field in the pivot table will be very helpful.
Thanks
Aman

Thanks KR for the response,
Yes I loaded multiple tables in the data model and using PoewrPivot ,
i have a rating column, in that i have 0,1,2,3,4,5 rating numbers and we call it "Total expected occurrence",
a single person can get same rating multiple times, if a person is getting >=4 rating no. we call it "Occurrence >= 4". now i have to find out the total
count of "Occurrence >=4" for a particular person from "Total expected occurrence" column,
once will get the net "Occurrence >=4" for everyone, it should divide
"Occurrence >=4"/ "Total expected occurrence" to take out the percentage of rating 4 for a particular person
Best Wishes,
Aman verma

Performing a specific calculation in a pivot table with BI Publisher 10g

I am using BI Publisher 10g and new on it and I need to integrate a specific calculation measure in a pivot table
The logic uses two measures that already exist in the report (Demand & PAB) and the required calculation is represented by a new measure/row (Calculated). The pivot time is in weeks
Week w0     w1     w2     w3     w4     w5 .....
Demand     d(w0)     d(w1)     d(w2)     d(w3)     d(w4)     d(w5) .....
PAB     p(w0)     p(w1)     p(w2)     p(w3)     p(w4)     p(w5) .....
Calculated     c(w0)     c(w1)     ....     ....     ....     c(w5) .....
If p(w0) < d(w1) --> then c(w0) = p(w0) / d(w1)
If not
If p(w0) < d(w1) + d(w2) --> then c(w0) = p(w0) / ( d(w1) + d(w2) ) * 2
If not
If p(w0) < d(w1) + d(w2) + d(w3) --> then c(w0) = p(w0) / ( (dw1) + d(w2) + d(w3 ) ) * 3
If not
etc .... Same logics apply for c(w1) and so on
Is such calculation logic achievable in Bi Publisher ? If yes, how would you do it ?
Thanks for your time and support on this
Regards, Samir
Edited by: skaroui on 02-Mar-2012 05:50
Edited by: skaroui on 02-Mar-2012 06:02
Edited by: skaroui on 02-Mar-2012 06:12

Can you use the logic that you specified in the data model (query) to generate the required data and then use it in the pivot table? That would be the easiest way to do it. Tweaking the code to include the conditional logic/calculated measures is not going to be straightforward..
Thanks,
Bipuser

Running total of calculated field in pivot

VERSION: ORACLE 11
TABLE:
create table chart_detail (
DIS        NUMBER,
BLD_MO VARCHAR2(7),
BLD        NUMBER(10),
RPLC      NUMBER(10));DATA:
insert into chart_detail values (60,'2011-03',0,2);
insert into chart_detail values (150,'2011-04',10572,0);
insert into chart_detail values (120,'2011-04',26449,5);
insert into chart_detail values (30,'2011-04',0,1);
insert into chart_detail values (60,'2011-04',0,7);
insert into chart_detail values (90,'2011-04',0,9);
insert into chart_detail values (120,'2011-05',5714,0);
insert into chart_detail values (90,'2011-05',24557,1);
insert into chart_detail values (60,'2011-05',0,4);
insert into chart_detail values (30,'2011-05',0,0);
COMMIT;EXPECTED RESULTS:
     2011-04                    2011-05
DIS     RPLC     BLD     TBLD     IPTV     RPLC     BLD     TBLD     IPTV
30     1     0     37021     0.03     0     0     30271     0.00
60     7     0     37021     0.22     4     0     30271     0.13
90     9     0     37021     0.46     1     24557     30271     0.17
120     5     26449     37021     0.59     0     5714     5714     0.17
150     0     10572     10572     0.59               0
180               0                    0
TOTAL     22     37021               5     30271          PROBLEM: I need to have a running total of IPTV like in the above example. I can get the IPTV for each DIS/bld_mo but I don't know how to get the running total of it. In the script below I just used an example where I tried summing the IPTV like was done for build. I know it can't be done that way because IPTV is a calculated field in the query but if I substitute "APR_IPTV" with the formula for IPTV I get an error that window functions aren't allowed here. I do not know a way around this. I commented out the bad piece of code.
PROBLEM SCRIPT:
WITH pivot_results AS
SELECT    dis
,    NVL (apr11_rep, 0) AS apr11_rep
,    NVL (apr11_bld,   0) AS apr11_bld
,    NVL ( SUM (apr11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0
                )        AS apr11_tbld
,      DECODE(NVL ( SUM (apr11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),0,0,ROUND(NVL(apr11_rep, 0)*1000/ NVL ( SUM (apr11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),2
                ))        AS apr11_iptv
,      NVL ( SUM (apr11_iptv)
                  OVER (ORDER BY dis DESC)
                ,                 0
                )        AS apr11_tiptv
,    NVL (may11_rep, 0) AS may11_rep
,    NVL (may11_bld,   0) AS may11_bld
,    NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0
                )        AS may11_tbld
,      DECODE(NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),2
                ))        AS may11_iptv
,      DECODE(NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),2
                ))        AS may11_tiptv
FROM     chart_detail
PIVOT     ( MAX (rplc) AS rep
          , MAX (bld) AS bld
          FOR bld_mo   IN ( '2011-04' AS apr11
                                         , '2011-05' AS may11
SELECT    CASE
        WHEN GROUPING (dis) = 0
        THEN TO_CHAR (dis)
        ELSE 'Total'
    END      AS dis
,    SUM (apr11_rep) AS apr11_rep
,    SUM (apr11_bld) AS apr11_bld
,    SUM (apr11_tbld) AS apr11_tbld
,    CASE
        WHEN GROUPING (dis) = 0
        THEN SUM (apr11_iptv)
    END      AS apr11_iptv
,    SUM (apr11_tiptv) AS apr11_tiptv
,    CASE
        WHEN GROUPING (dis) = 0
        THEN SUM (apr11_tpiptv)
    END      AS apr11_tiptv
,    SUM (may11_rep) AS may11_rep
,    SUM (may11_bld) AS may11_bld
,    SUM (may11_tbld) AS may11_tbld
,    CASE
        WHEN GROUPING (dis) = 0
        THEN SUM (may11_iptv)
    END      AS may11_iptv
FROM    pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Thank you,

Hi,
So you know how to compute iptv for an individual row; the problem now is that you want to get a running total of iptv; is that it?
The problem there is that computing iptv requires an analytic function, and analytic functions can't be nested. To get the results of nesting f (g (x)), where f and g are analytic funtions, you have to compute g in a sub-query, and then use the results as the argument to f in a super-query.
Here's how to apply that to your situation:
WITH pivot_results AS
     SELECT    dis
-- April, 2011
     ,           NVL (apr11_rep,   0) AS apr11_rep
     ,           NVL (apr11_bld,   0) AS apr11_bld
     ,           NVL ( SUM (apr11_bld)
                                   OVER (ORDER BY dis DESC)
                      , 0
                      )               AS apr11_tbld
     ,      NVL ( 1000 * apr11_rep
                          / NULLIF ( SUM (apr11_bld) OVER (ORDER BY dis DESC)
                                      , 0
               , 0
               )               AS apr11_iptv
-- May, 2011
     ,           NVL (may11_rep,   0) AS may11_rep
     ,           NVL (may11_bld,   0) AS may11_bld
     ,           NVL ( SUM (may11_bld)
                                   OVER (ORDER BY dis DESC)
                      , 0
                      )               AS may11_tbld
     ,      NVL ( 1000 * may11_rep
                          / NULLIF ( SUM (may11_bld) OVER (ORDER BY dis DESC)
                                      , 0
               , 0
               )               AS may11_iptv
     FROM     chart_detail
     PIVOT    (    MAX (rplc) AS rep
                ,    MAX (bld)   AS bld
                FOR bld_mo   IN ( '2011-04' AS apr11
                                  , '2011-05' AS may11
SELECT    CASE
              WHEN GROUPING (dis) = 0
              THEN TO_CHAR (dis)
              ELSE 'Total'
           END      AS dis
-- April 2011
,           SUM (apr11_rep) AS apr11_rep
,           SUM (apr11_bld) AS apr11_bld
,           SUM (apr11_tbld) AS apr11_tbld
,           CASE
              WHEN GROUPING (dis) = 0
              THEN ROUND ( SUM (SUM (apr11_iptv))
                                      OVER (ORDER BY dis)
                  , 2
           END      AS apr11_iptv
-- May 2011
,           SUM (may11_rep) AS may11_rep
,           SUM (may11_bld) AS may11_bld
,           SUM (may11_tbld) AS may11_tbld
,           CASE
              WHEN GROUPING (dis) = 0
              THEN ROUND ( SUM (SUM (may11_iptv))
                                      OVER (ORDER BY dis)
                  , 2
           END      AS may11_iptv
FROM      pivot_results
GROUP BY ROLLUP (dis)
ORDER BY pivot_results.dis
;Output:
      APR11 APR11   APR11 APR11 MAY11 MAY11   MAY11 MAY11
DIS    _REP   _BLD   _TBLD _IPTV _REP   _BLD   _TBLD _IPTV
30        1      0   37021    .03     0      0   30271    .00
60        7      0   37021    .22     4      0   30271    .13
90        9      0   37021    .46     1 24557   30271    .17
120       5 26449   37021    .59     0   5714    5714    .17
150       0 10572   10572    .59     0      0       0    .17
Total    22 37021 158656            5 30271   96527As you can see, this is not quite what you wanted on the row where dis='150'. You asked for NULLS in the may11_rep, may11_bld and may11_iptv columns. You can get those results if you need them; just explain the rules that govern whether to display the values and when to display NULL.
The way you posted the sample data and results, and the quantity of sample data were all excellent; it really helped me find a solution. Thanks.
It would have also helped it you had explained how iptv is computed. Basically, iptv = 1000 * rep / tbld, right?
It looks like most of this code:
,      DECODE(NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),0,0,ROUND(NVL(may11_rep, 0)*1000/ NVL ( SUM (may11_bld)
                  OVER (ORDER BY dis DESC)
                ,                 0),2
                ))        AS may11_iptvwas a way of avoiding divide by 0 errors; it would have been helpful if you had explained that.

Pivot table: Building Calculations

Hi,
i've following problem. Actually I have a pivot table with 4 columns (say A,B,C,D).
Example
Region| A | B | C | D
Berlin |7 | 4 | 1 | 4
Bonn |3 | 2 | 1 | 3
Total |10| 6 |2 |7
Each column item has as rule of aggregation SUM.
Now my customer wants that column B isn't a sum of each row value, but that it's calculated as SUM(column B) / SUM(Column D)
So my example must be:
Region | A | B| C| D
Berlin | 7 |4 | 1 |4
Bonn | 3 |2 | 1 |3
Total |10 | 6/7| 2| 7
is it possible?
Thanks
Giancarlo

Thanks,
but i believe there was a BI built-in functionality. Your idea is wonderful, but it isn't applicable in my scenario. For example Total row unlike other rows must have a blue blackground color and with conditional formatting i can format only column Region, but not columns A,B,C,D that are measures.
Then, column Region elements (Berlin and Bonn) are drillable. In this way, even Total element become drillable, and it isn't good...
Thanks
Giancarlo

Wrong value with calculated item in pivot table

I have a report with 4 columns:
First Column are Department Dimension
Second Column is Actual value
Third Column is Previous value
Four Column is: ((Actual Value-Previous Value)/Previous Value))*100 that called Var
Then I do a pivot table and I have new calculated item: Department1/Department2 and I have wrong value in four column:
Department----------------------------------Actual-------Previous------Var
Dept1------------------------------------------18503--------16308--------13,5
Dept2-------------------------------------------3758---------3518----------6,8
(Calculated Item: Dept1/Dept2)--------4,92---------4,64------------*2* <---- This value is wrong...and it has to be: 6,03
Is possible to get the correct value???
Thank you very much!

hi,
Create a logical column with ur calculation formula and make it as default agg rule in rpd and answers change it to server determined/server complex agg.I did the same it was working fine for me!!
Check this link
http://books.google.com/books?id=OnbYrkWa4RsC&pg=PA74&lpg=PA74&dq=%22server+complex+aggregate%22&source=web&ots=qxrpaFXmo2&sig=CxLOemzcOlvIiaQ_sQD4fPQotdM&hl=en&sa=X&oi=book_result&resnum=5&ct=result#v=onepage&q=%22server%20complex%20aggregate%22&f=false
thanks,
saichand

Calculated item in pivot table - OBIEE 11g

Hi,
I need to display only the calculated items in my pivot table and I want to hide the other members. I am using OBIEE 11.1.1.5.0.
Is it possible to have different selection steps for different views.
Please help.
Thanks,
Prabhu S.

Hi Dhar,
Thanks for your answer. I want to use section wise display in pivot table and need to show only the calculated members in the sections.
I need to hide other values of the particular section column.
Thanks,
Prabhu S.

Calculation in Pivot..

Similar Messages

Maybe you are looking for