Calibration order-time confirmation screen not appearing

I am setting up a calibration process.
While doing the result recording , time confirmation screen doesnt appear.
Why is it so?

hi
In task list assigned the work center along with control key QM04, so that when u provide the reault then system pop-up the confirmation screen.
provide confirmation and apply UD and close it.
Regards

Similar Messages

PM Object list & Order time confirmation link tables

Hi Gurus,
We are using the Object list in the maintenance plan and the PM order is triggered. The list of functional locations are maintained in the Object list.
The monitoring / Inspection details are captured against individual object list during the time connfirmation using the SORT FIELD.
To track the time confirmation with reference to the functional locations used in the object list a report needs to be developed.
I can understand that the Object list initial details are stored in the table "OBJK".
However the data update after time confirmation is not refecting in the table "OBJK".
Can anybody share your experiences.
Thanks in advance
Regards,
Raj

Narashiman,
1. During the time confirmation (IW41) by selecting the Object list push button on the top of the page, the "SORT FIELD" can be updated and the "processing indicator" can also be set against each object line item.
2. The updated "SORT FIELD", "processing indicator" information during the tme confirmation can be seen in the order under the tab page "Objects".
Regards,
Raj

The first time I connected my new My Passport portable hard drive to my Mac, the message asking if I want to use the drive to back up with Time Machine did not appear. What is the next step?

The first time I connected my new My Passport portable hard drive to my MacBook Pro, the message asking if I want to use the drive to back up with Time Machine did not appear. I would like to set it up to do this. What would my next step be?

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Open Time Machine preferences to select this drive for use as the backup drive. Turn on Time Machine.

Time capsule does not appear in the finder.

My time capsule appears in airport utility. It is ready to go. I have it on ethernet because airport isn't a very powerful wireless router. The time capsule does not appear in the finder. It does not appear in the disc utility. It does not appear in time machine. The airport utility will do factory resets, get it ready for internet, whatever. The rest of my net work can not see it.
I have done the finder preferences. I have restarted the computer, jiggered the sharing preferences, done factory resets, tried to find sparce bundles and sparse bundles, reset the finder, force quit finder, tried to find finder plsts, trawled the discussion pages, tried to find server addresses and apple ids. Nothing seems to work.
Time capsule never seems to work as smoothly as it supposed to. I shudder to present my problems to apple support because I know that its a long road and will probably end in tears. But here I am, naked before this disappointing edifice.
Does anyone have any ideas?

What is the make and model number of your modem?
I have a microwave modem on my roof. I don't think that has anything to do with this. I am not using my airport for a wireless router, only as a time capsule connected by ethernet. The Airport Utility calls my airport : Airport Extreme 802.11 ( 1st Generation )
Is the Time Capsule acting as your main router or is another device handling those services?
No, I have a lyncsis router. The wireless router function on airports doesn't seem to work very well. I don't think thats a problem with mine. My brothers have gone with lyncsis as well.
Was the Time Capsule visible in the Finder before, and is now "lost", or has it never appeared in the Finder?
It appeared on my previous laptop. That died. Now I have an imac. The airport has never appeared on the imac.
Thanks for trying to help so quickly
JOhn

Time machine does not appear to backup an external HD. how do I get that included in the backup?

time machine does not appear to backup an external HD. how do I get that included in the backup?

In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? If it's not "Mac OS Extended," Time Machine can't back up the volume.

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

Messages only alert when received 1/4 of the time and do not appear in lock screen even though the ability to see them is turned on

I'm not notified at all 3/4 of the time that I have received a text message. How do I fix this?

Hey M0904,
I found the following information regarding troubleshooting notifications, I'd run through them and see if they resolve the issue:
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
Have a good one,
David

Time Capsule crashing; not appearing in AirPort Utility

Hi all
My Time Capsule keeps on crashing, and is currently not appearing in the AirPort Utility window. I restarting it by unplugging it and plugging it back in again, but it will randomly crash again, or the sessions will be interrupted on the TC drive and the additional HDD that's plugged into it. I'm not really sure what's going on here. It's not like I'm sitting too far away from the Time Capsule (less than 3m, in fact).
The only thing that's going on that could be causing this, as far as I can see, is my attempting to migrate my files and folders from my old PowerBook to my new MacBook Pro (a procedure that is not, in all honestly, going all that well).
Thanks in advance

Rob,
If you don't mind a few more suggestions...
*_Time Capsule Weak Signal Strength / Dropped Connections_*
Forgive the size of the post, but the suggestions below have helped others with similar issues. Try each topic individually and see if things improve, If not move on to the next one.
*Keep the Time Capsule Cool*
Some posters have observed that when they positioned the Time Capsule for better ventilation and cooling, their network connectivity issues resolved themselves. Also avoid locating the devise within poorly ventilated cabinets or piling items around or on top of it.
*Time Capsule Orientation*
While the location you chose to setup your Time Capsule may be acceptable, but the direction it is oriented can have an effect on signal strength. It appears that the signal of the Time Capsule does not radiate equally from all sides of the devise.
The antennas within the devise are positioned along the 3 smooth sides. That is, there is no antenna on the side bearing the ports and cables. As a result, position the devise with the ports and cables AWAY from the direction of most of the clients that will be connecting to it.
*Cordless Phones*
Some users have discovered that the cordless phones they have in the home occupy or are near the same bandwidth as their wireless network (2.4Ghz or 5Ghz). Try temporarily disabling the handsets and their bases and see if network connectivity improves. If so you may need to change the channel that the phone uses or purchase phones that occupy a different bandwidth.
*Proximity To Other Devices*
One poster observed: “Finally have full access, full speed, and full functionality. Initially I installed the Time Capsule at the location of my cable, cable modem... which of course was next to my HDTV, DVD, Apple TV, Amplifier, etc. Get the picture? After about 4 weeks of starts and stops, resets and repeated initial backups, I moved the unit to another location, closer to my Mac, and in an area where there are no other electronics. Now, it runs perfect.” [http://discussions.apple.com/thread.jspa?threadID=1734818&tstart=0]
*Change Firewall Settings* #
Go to System Preferences --> Security.
Click the Firewall tab.
Change setting to “Set access for specific services and applications”.
The System will now ask you when each process wants to penetrate the firewall. Once you click “Allow” each time you are asked, it will be saved in the pane at the bottom of this window and it should never ask you again.
One poster observed, “Since I made this change, my wireless has been strong and Time Machine works like a champ and the impact on my network performance is minimal. I speculate that the change in performance is due to security protocols or services that run in the 'allow all incoming connections' and 'allow only essential services' modes. Whatever the reason this fix has worked for me for over 2 months without resetting my airport connection or time capsule.” [http://discussions.apple.com/thread.jspa?messageID=8348496#8348496]
*Change Time Capsules’ Channel*
Launch Airport Utility.
Select the device on the left.
Click "Manual Setup."
Select “Airport” in the toolbar.
Click the "Wireless" tab.
If “Channel” is set to “Automatic” try changing to a different one. Holding the Option key down and clicking the drop-down menu should provide more channels to choose from. If you have another wireless router operating, ensure that each devices’ channels are as far apart as possible.
Click “Update”.
Close Airport Utility.
*Preferred Networks & Airport Services*
You may be experiencing interference from other networks in your neighborhood. When you click the Airport menu are there other networks listed other than your own?
If so, is your network at the top of the list? It should be.
Go to System Preferences --> Network --> Select Airport on the left.
Click "Advanced". In the “Airport” tab note the various local wireless networks that Airport detects. Is the network you prefer to connect to at the top of the list? If not drag it to the top. Are there other networks you never intend to connect to (an old work network, or a neighbors network)? Then highlight them and click the "-" button.
Make sure “Remember any network this computer has joined” is checked.
Click "OK".
For "Network Name" be sure your network is selected and then click "Apply".
Is Airport (wireless) your primary means of connecting to your network? If so, is Airport at the top of the list of services on the left? It should be.
Click the small “Gear” button at the bottom of the window and select “Set Service Order”.
Now drag Airport to the top of the list.
Click “OK”. Click “Apply”.
Now see if network connectivity has improved.
*Transmit Power & Wide Channels*
If you are using the 802.11n only (5GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
Launch Airport Utility
Select your Time Capsule on the left.
Click “Manual Setup”.
Select “Airport” in the toolbar.
Click the “Wireless” tab.
Click “Wireless Options...” at the bottom of the window.
Adjust the “Transmit Power” to 100%.
Put a check mark in the box labeled “Use Wide Channels”. (If you are using a 802.11a/b/g (2.4GHz) radio mode then select “Interference Robustness”)
Click “Done”.
Click “Update” in the lower right hand corner.
Wait for the Time Capsule to restart and then see if your network speeds improve.
*Faulty Airport Card*
One poster reported: “I reckoned the fault must be with the Macbook’s hardware so took the plunge and got a new airport card fitted to my Macbook and now everything is working fine. At last I have a working Macbook!” [http://discussions.apple.com/thread.jspa?threadID=1719326&tstart=0]
If you think this might be the case, follow the steps outlined in this KB article to determine if your Airport card is still being detected by your system:
[http://support.apple.com/kb/HT2601]
Let us know if any of the above helped improve your situation.
Cheers!

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Oracle Forms 11g Login Screen Not Appearing

Environment:
1 PC running RHEL5 (Red Hat Enterprise Linux version 5) Operating System 64-bit with Oracle Database 11g (64-bit)
1 PC running RHEL5 (Red Hat Enterprise Linux version 5) Operating System 32-bit with Oracle Fusion Middleware 11g (64-bit), plus Oracle WebLogic Server 32-bit
1 PC windows (work PC) is the client so just using any browser to connect to the application
Trying to run a sample form, and have all processes started (nodemanager, weblogic, opmn, emagent, emctl), database listener, database started up, but when the Oracle Forms Services splash screen display comes up, it just hangs and the default Oracle login screen does not appear. I'm at a loss. I moved my 3 pcs thus got new IP addresses via the DHCP network. Setup the TNSNAMES.ORA with the IP address of the db machine in the file of the webserver machine. Can connect directly on the machine, can connect via TOAD, SQL+ but not when launching a form. Any clues?
Thanks,
GJ

FormsEleven wrote:
Did you start Managed servers like WLS_FORMS .. Well when I go to the AdminConsole for the FormsDomain, I see 3 servers with a status of "RUNNING": AdminServer, WLS_FORMS, WLS_REPORTS. Then when I go to the Enterprise Manager for the FormsDomain I see all domains with all the servers (AdminServer, WLS_FORMS, WLS_REPORTS), in a green status up and running (100%).
I made sure I started the NodeManager, WebLogicServer scripts.
FormsEleven wrote:
What is the ports you are using to run the form.?8888
FormsEleven wrote:
Did the test Form came up fine?No. I even created a simple form to look at the default Oracle "emp" table, and nothing comes up.

Maintenance work order-- Time confirmation report for work orders

Could you please let me know how to pull actual time confirmation report for the maintenance work orders?
regds
Arun

Use transaction IW43 or IW47 for maintenance order confirmation ( inprocess & completed ) and refer [link|http://help.sap.com/saphelp_erp2005/helpdata/en/66/158661547611d182cc0000e829fbfe/frameset.htm]
-S.N

Loading Screen Not Appearing

I have published five Captivate tutorials using the same
preferences; however, the loading screen is not appearing for one
of the published tutorials. Does anyone know how I can I fix this
problem? (I have selected the loading screen check box under
Project Start Options.)

Hi again
How odd. The only thing that comes to mind on this (and it's
such a long shot that you can see I'm grasping at straws here) is
that perhaps instead of the default preloader, (you know, the one
where the little arrow circles round and round until it counts up
to 60%) the option to display an image was used. And somehow the
image selected is just all white or something. Actually, that may
be worth double checking as well. Try clicking the button with the
ellipsis ( ... ) and selecting one of the simple images or possibly
the DefaultPreloader.swf and see if that makes a difference.
I sincerely hope you get it sorted easily
Cheers... Rick

Time Capsule does not appear in AirPort Utility after Yosemite upgrade

Just upgraded to Yosemite and the Time Capsule appears as a shared device in Finder, but does not appear in AirPort Utility. Any solution to this so I can manage my Time Capsule again?

I'm having the same problem. Did you reset your Time Capsule to factory settings or simply restart it?

Time machine does not appear in Disk Utility

Time machine does not show up in Disk Utilities, connected by ethernet. I need to erase the disk. How to solve?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Time Machine does not appear to auto delete old backups

I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning), and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
I am using an OWC Mercury Elite AL Pro 2TB external drive with an eSATA connection. Our typical business files can range from 100 to 300MB each. In the Apple Support Mac 101 Time Machine article it states "As your backup disk begins to fill up to its capacity, Time Machine intelligently deletes the oldest backups to make room for newer ones (and will alert you if the "Warn when old backups are deleted" option is selected in Time Machine preferences)." To date, this warning has not appeared making me think no deletions have occurred.
Thanks for any thoughts, Scott

Scotttt wrote:
I would like old backups to be automatically deleted, but so far does not appear to have occurred as I have not received any warnings. I have checked the box in the setup dialog box to do so. I have only 60GB remaining and receive warnings from Tech Tools that the free space threshold is at 2% remaining.
Does the drive have to be fully exhausted before older backups are automatically deleted (causing the warning)
The oldest backup(s) won't be deleted until there isn't room for a new one. And "warning" is a bit misleading -- when there isn't enough space, the backup will fail, without deleting anything, until you deselect the option. See #C4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Note that this has changed for Snow Leopard; it does the deletion(s) automatically, then sends a notice.
and if so should I turn off the Tech Tools warning for remaining disc space for that drive?
Yes. That accomplishes nothing. Time Machine manages it's space automatically.
To date, this warning has not appeared making me think no deletions have occurred.
That's not strictly true; it applies only when Time Machine has to delete your oldest backups to make room for new ones. But it also deletes "expired" backups every time it does a new one. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Calibration order-time confirmation screen not appearing

Similar Messages

Maybe you are looking for