Call a external SWF by press the button within another SWF file but the second SWF file play Externely

Hello Guyz.
i am working on Macromedia Flash 8 and i just want to call a external SWF when i press the button within another SWF file.......but the second SWF file play Externely............can any one knows the code.... AS2

try this
http://www.actionscript.org/forums/showthread.php3?s=&threadid=28123

Similar Messages

Press power button, No post, No Video. 20 seconds later power button flashes many different colors

Hi, Hope someone can be of help here. Working with one of the newer A135's w/ vista. Plugged in all looks good, charging light and all but when you press the power button all looks good at first but about 20 seconds into unit powered up, no post, no video no nothing I get the power light bar changing colors, it goes from dark blue to light blue to orange to amber to green and starts all over again. It appears that there are not too many people with the same problem so only actual support would be appreciated. I can solder to component level so if anyone has a schematic and area of potential search for the bum chip it would be greatly appreciated!

Hello Chatbox,
I can understand your issue very well, as there is no message comes on the screen which gives you information to plug the power adapter and prevent the laptop to get shut down.
You should install Power Manager software and then customize it as per your requirement.
The software can be download from the mentioned below web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8mu417ww.exe
Hope, after this laptop will not shut down automatically due to battery backup
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT201303 OK SO I BOUGHT MY 7YEAR OLD DAUGHTERS AN IPOD TOUCH FOR THEIR BIRTHDAY AND THE SECOND THEY START PLAYING WITH THEM ONE SET A PASSWORD TO ENTER THE IPOD AND FORGOT THE PASSWORD. IT SAYS THAT THE IPOD IS ENABLED... HOW DO I FIX THIS PROBLEM? HELP

I BOUGHT MY 7 YEAR OLD DAUGHTERS A IPOD TOUCH FOR THEIR BIRTHDAY, THE SECOND THEY BEGAN TO PLAY WITH THEM THEY BOTH SET PASSWORDS TO ENTER THE IPOD HOME PAGE, WELL ONE OF MY GIRLS FORGOT THEIR PASSWORD AND NOW IT SHOWS THAT THE IPOD IS ENABLED... HOW SHOULD I GO ABOUT THIS?

You will need to restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Also, please note that you posted in the iPhone forum.
Regards.

Hi... can i use the new earphone with microphone to make calls in skype without must press a button bellow the left phone?

I forgot, make call using a PC, not on iPhone.

As far as I know, PAP2 does not provide an option to disable Inbound calls from both line 1 and 2 although you can set it up to block calls and enable DnD.
You will have have to switch your RJ11 cord back and forth from the wall and PAP2 in order to do outbound calls and receive inbound calls.

HT1430 My iPad is not turning at all even after folowing reset method of pressing wakeup button and home botton symultenously for 10 seconds.

Hi,
My iPad 2 is not turning on at all even after trying to reseet as advised by Apple. Please help me how to make it working.
Regards,
Dhiraj

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Unable to display the Content of a data file from within another data file in Oracle webcenter portal.

We have a Content Presenter taskflow. This task flow is added to a jspx page. The taskflow fetches the content from the contributor data file. The contributor data file is having a WYSIWYG editor. The content of the WYSIWYG editor is being displayed correctly through the task flow.
We have some links in the WYSIWYG editor. These links again point to some data files. When we click on these links from within the portal, then we are getting a blank page(the url of this blank page is: http://localhost:7101/eWSIBPortal/faces/oracle/webcenter/sitestructure/render.jspx?datasource=UCM%23dDocName%3AWSIB_ARTICLE) and not displaying the content of the data file that we are pointing to from the WYSIWYG editor.
We want to display the content of these data files(which we have pointed from WYSIWYG editor) in-line within the portal.
Please help us to resolve this issue and let us know if any information is required from our end.

Thanks for reply. However, can I use XSQL to dump the formated text to a file? or just can display to client through web browsers?

After pressing the apply button, all fields become readonly in page

hello friends,
i have a requirement that when i click the apply button , all the records should save into database then all the fields should become readonly in page.
vary urgent....
Thanks
krishna.

Krishna,
To make bold use the CSS OraDataText on fields.
cant we disable add another row button when we press apply button. why because after pressing apply button add another row can add new row and that row also becoming readonly. so how to control that addanother row button after pressing apply button.Yes you can disable the add another row button by using SPEL.
Thanks
--Anil

Can I use Apple Script to press a button?

Is there some way I can create an Apple Script to run and press a button in another application, or create a "plug-in" type script for the program to make the button into a something that can be used by a keyboard shortcut?
I ask because I have an application that I can use to operate my digital camera, however, the button that Auto-Focuses then Shoots a photo does not have a keyboard shortcut. This is a problem because I also have the App "Snatch" on my iPhone, and, long story, short, I discovered I could use Snatch on my laptop on an Ad-Hoc network from about 1,000 feet away, maybe more. If I could find a way of making the "AF and Shoot" button into a keyboard shortcut, or create a script that could be triggered by a keyboard shortcut to press the button, I could use Snatch to control my camera remotely, far better then any part I would by from Nikon, or a third-party (Trust me, I have used a lot of them, and this method beats them all, save for the fact that I can't use bulb.)
Anyway, thanks for any input, if any.

Even if an application is not scriptable, you can generally use [GUI Scripting|http://www.macosxautomation.com/applescript/uiscripting/index.html] to press a button. For example, using Canon's RemoteCapture DC software, the script below will press the "Release" button of the main window:
tell application "RemoteCapture DC" to activate
tell application "System Events"
tell process "RemoteCapture DC"
click button 4 of window "RemoteCapture DC"
end tell
end tell
If you then put the above script in the AppleScript menu in the menu bar, you should be able to use a third party application, like Quicksilver, to assign a keyboard shortcut to it.
Message was edited by: Pierre L.

My IPod 6th Generation Nano doesn't shuffle when I press the shuffle key. It keeps playing the same song?

My IPod 6th Generation Nano isn't shuffling. I press the shuffling choice on play music. The same song plays over and over again. What do I need to do?

It sounds like the Repeat setting has been turned on/enabled. See your iPod's User Guide for information on how to disable it.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Can not lookup EJB from another EAR file, the ClassCastException returned

Hi,
     I try to call EJB module in A.ear from Servlet in another EAR file(B.ear) the ClassCastException returned on the context.lookup() code . So when i create a Dynamic Web Project(With the same code as Servlet in B.ear) and pack it in A.ear(The same EAR file with EJB module), it work fine. I have no idea. Could you please suggest me.
The ClassCastException : incompatible with interface ..... return on
HelloManBeanLocalHome home=(HelloManBeanLocalHome) ctx.lookup("localejbs/sap.com/HelloMan_EAR/HelloManBean");
The entire code is below :
          try {
               InitialContext ctx=new InitialContext();
               HelloManBeanLocalHome home=(HelloManBeanLocalHome) ctx.lookup("localejbs/sap.com/HelloMan_EAR/HelloManBean");
               HelloManBeanLocal remote=home.create();
               lookupText=remote.helloMan("Test");
          } catch (Exception e) {
               // TODO: handle exception
               e.printStackTrace(out);
Many Thanks

Hi Saleem Mohammad.
           Thank a lot for your post. I got this idea from your link. The below code work fine.
          try {
               InitialContext ctx=new InitialContext();
               Object obj= ctx.lookup("localejbs/sap.com/HelloMan_EAR/HelloManBean");
                ClassLoader homeCl = obj.getClass().getClassLoader();
                Class<?> localHome = homeCl.loadClass(HelloManBeanLocalHome.class.getCanonicalName());
                java.lang.reflect.Method method = localHome.getMethod("create");
                Object homeObj = (Object)method.invoke(obj);
                ClassLoader localCl=homeObj.getClass().getClassLoader();
                Class<?> local = localCl.loadClass(HelloManBeanLocal.class.getCanonicalName());
                Class args[] = {String.class};
                java.lang.reflect.Method localMethod=local.getMethod("helloMan",args);
                Object params[]={"Thongie"};
                Object localObj = (Object)localMethod.invoke(homeObj,params);
                lookupText=(String)localObj;
          } catch (Exception e) {
               // TODO: handle exception
               e.printStackTrace(out);

Hello, my i phone froze suddenly and it won t start up. when people call me they hear it ring but the phone is dead, the screen all black and when i press the start up button nothing happens. i tried to connect it to the macbook but nothing happens

hello, my i phone 4 froze suddenly. before it did, the battery was 80% full. i called it from another phone and i can hear a ringing tone but my phone is completely dead. i pressed the operating button and nothing happens. also i tried connecting it to my mac but nothing happens. i also put it on the charger but nothing happens. any tips please?

Try this yet then.
How to reset your SMC >>
Run fsck.
1. Reboot/Startup holding your Command-S key down.
2. At the command line type the following and hit 'Return.'
/sbin/fsck -fy
3. After it has check/repaired your disk, type 'reboot' and hit 'Return' again. Unit should bootup normally.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

HT4972 i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on

i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?

roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work

Hello all, I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings Gene

Hello all,
I bought an iPhone 5 in the US and brought it back to Brasil. Now I'm trying to use Siri, but once I press the "home" button "voice control" appears and it only works for me to call my contacts. The manual guide tells me to go to Settings>General>Siri. At the General menu "Siri" doesn't appear. What should I do to set Siri up if it doesn't appear at settings>general?
Thank you,
Melanie.

Go to Settings>General>Restrictions and make sure Siri is set to On.

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... please help

When making a call, sometimes, my iPhone 5 , gets stuck on 'Calling' than I have to press END..but still nothing happens, than when I press HOME button, the call app keeps running in the background and it keeps saying CALLING... than I have to wait 2 - 3 minutes and call again.
please help

Has nothing to do with the SIM or master reset. This has been done to my phone. The SIM once and the factory reset many times over. You all just sold us a bad piece of equipment and have us by the tail with our contracts so none of us can get a new phone without paying full price or re-upping our contract. I just got off the phone last night with your high up tech people (you know, the hidden number we get once we tear into your support people enough), they went into my phone again and still didn't find anything wrong. I about got fired from my job for not getting my calls and texts. The BBB has now been contacted, and I feel your end should shore this up for all of us!

Call a external SWF by press the button within another SWF file but the second SWF file play Externely

Similar Messages

Maybe you are looking for