Call function module in new task
I need to call a function module starting new task but the problem is that it has inporting parameters also. Please help me in doing this. Points will be rewarded.
Look at the ABAP keywords RECEIVE RESULTS FROM FUNCTION. This is where you can get the results from the CALL FUNCTION MODULE... NEW TASK...
It's all in the ABAP help for CALL FUNCTION MODULE.
matt
Similar Messages
-
ABAP Dump when calling Function Module Starting New Task
Hi all. I have a tricky situation now, I am doing a POC on parallel processing.
I am getting an ABAP dump on the following Call Function line which is in class lcl_steer_114numc (See below for full program):
METHOD start.
CALL FUNCTION 'Z_ZZCLS_STEER_114NUMC'
STARTING NEW TASK me->id
CALLING me->finish ON END OF TASK.
ENDMETHOD. "start
However I get the following ABAP dump:
Short text
Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"
The function module only contains a wait statement to simulate parallel processing. It is strange that it dumps here, because when I change the FM call to another call that has been triggered successfully from other classes, it still produces the same ABAP dump.
The background of the Proof Of Concept is to see if I can get an event to trigger the next process that depends on the outcome of the previous process. Parallel processes are run in the start methods by calling RFC.
<Garbled code removed>
Moderator Message: Please post relevant portions of the code only.
Edited by: Suhas Saha on Jul 17, 2011 1:17 PMWell, the thing is I did manage to run 3 other Function Modules asynchronously succeesfully prior to that function call, with the same exact function call syntax. Further more, I have tried editing it with your suggestion but I get the exact same dump.
The complete function group can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZmFhNzcwMTgtYzQ0Mi00NzQ4LTg5YTMtNDNlNWUxYTM2NTg3&hl=en_US
The complete program can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4YWJmNjU3ODYtODRmMy00Nzg2LThkNTUtZjNkNDRhZGQ3MTUw&hl=en_US
The complete ST22 dump can be found here:
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZDU1YmFkZDAtOTU5MS00ZTgwLWFlZTktNWZhMDUxMzJlZWNl&hl=en_US
Basically I ST22 gives me the following:
Runtime Errors RPERF_ILLEGAL_STATEMENT
Date and Time 17.07.2011 05:29:54
|Short text |
| Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK" |
|What happened? |
| Error in the ABAP Application Program |
| |
| The current ABAP program "Z_ZZB1_CLOSE_PERIOD_TEST2" had to be terminated |
| because it has |
| come across a statement that unfortunately cannot be executed. |
And it explains it here (but is not helpful / relevant at all) as I ran the program from SE38.
|Error analysis |
| There is probably an error in the program |
| "Z_ZZB1_CLOSE_PERIOD_TEST2". |
| The program was probably called in a conversion exit |
| or in a field exit. These are implemented by |
| function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or |
| USER_EXIT_xxxxx_INPUT. |
| Conversion exits are triggered during screen field transports or |
| WRITE statements, field exits during field transports from the |
| screen to the ABAP/4 program. |
| In this connection, the following ABAP/4 statements are not allowed: |
| |
I hope you try to download the slinkee files and you will notice the call function I performed was no different than the other call function RFC calls that really are working. -
CALL FUNCTION WITH STARTING NEW TASK
Hi All,
i'm call a function module through
CALL FUNCTION 'Y_WIN' DESTINATION 'rfc_destination' then it's give right result but when i want to call with starting new task then
CALL FUNCTION 'Y_WIN' STARTING NEW TASK 'INFO' DESTINATION 'rfc_destination'
it does nt provide me any data. i have check in debugger call fm is wkging fine so pls clear me why i'm nt geeting result.
pls give ur suggestions,
AnujDid you use the PERFORMING <form> ON END OF TASK to get the results back; like in the following sample
CALL FUNCTION 'SAPWL_STATREC_READ_FILE'
STARTING NEW TASK taskname
DESTINATION list-name
PERFORMING read_outtab ON END OF TASK
EXPORTING
read_start_date = s_date
read_start_time = '000000'
read_end_date = s_date
read_end_time = '235959'
EXCEPTIONS " failure when calling RFC
communication_failure = 1 MESSAGE msg_text
system_failure = 2 MESSAGE msg_text
RESOURCE_FAILURE = 3.
and
FORM read_outtab USING taskname.
* Receive results back
RECEIVE RESULTS FROM FUNCTION 'SAPWL_STATREC_READ_FILE'
TABLES
v2_normal_records = outtab
EXCEPTIONS " from the called FM
nodata = 1.
Regards -
Calling Function Module in Update Task
Hello Experts,
Can anyone let me know about
Calling Function Module in Update Task.
Why do we use this " In Update Task " ??
How do we Use ??
What is the Use... ??
Kindly let me know....
Thanks and Regards
Pramodhi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Real time scenario.
Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Hope this is helpful, Do reward. -
Behaviour of CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE'
As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in same user session.The behaviour is wrong as per documentation.
But current behaviour:
The statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' is creating a new user session.
Any reason?Hi Prakash,
I'd agree with Suhas, that you're reading the documentation wrong. Here's your quote:
As per ABAP help documentation, the statement CALL FUNCTION fname STARTING NEW TASK DESTINATION 'NONE' should create a new main session in current user session.
If you look at the help, you can see that it says:
When the destination NONE is used, a new main session is opened for the current user session.
Do you see the difference? Also, note that in this context main session basically means that we're talking about a new external session:
Each task ID defines a separate RFC connection with its own context, meaning that, in the case of repeated function module calls of the same task ID, the global data of the relevant function group can be accessed, if the connection still exists.
In dialog processing, note that the maximum number of six main sessions cannot be exceeded, else an error message is displayed.
If you're still in doubt, check out the online ABAP documentation for [CALL FUNCTION - STARTING NEW TASK|http://help.sap.com/abapdocu_70/en/ABAPCALL_FUNCTION_STARTING.htm]. So I'd say the documentation is in line with the actual behavior.
Cheers, harald -
What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?
Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days -
Call Function'BAPI_USER_CHANGE' starting new task 'TEST'
Hi All,
I have problem with starting new task statement, I am using one FM after that am using starting new task 'TEST'
statement but its not working in one system its working fine in other systems, Please help me who this works.
Thanks in Advance.
Eg: Call Function'BAPI_USER_CHANGE' starting new task 'TEST'
RegarThanks Lqueiroz ,
Now again i am getting a DUMP by saying ,
"An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "At least one entry could not be "
on the called page."
so what can be the reason for this
call function 'ZRFC_PER_DIEM' starting new task lc_taskid performing subr on end of task
exporting
h_guid = it_header_guid_n
request_obj = lt_requested_objects_n.
wait up to '1' seconds.
read table gt_scl into ls_scl index 1.
p_transaction_per_diem = ls_scl-value.
read table gt_scl into ls_scl index 2.
transaction_currency_code = ls_scl-value.
form subr using task_id type clike.
data: p_transaction_per_diem type char13,
transaction_currency_code type char3.
receive results from function 'ZRFC_PER_DIEM'
tables
value = gt_scl.
So basically i am getting dumo when receive statenment is running , by giving above dump.
Regards
PG -
CALL FUNCTION func STARTING NEW TASK task
hi,
i developed rfc to extract data and send to xi
as my interface is Async
as per soem documents it was mentioned the syntax
CALL FUNCTION func STARTING NEW TASK task
wat is the task ? in the syntax
and how do i use it
jeffHi suresh,
this is the code of RFC. if i execute without RFCDESTINATION it executes successfully. when i use RFC DESTINATION it shows error
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException
i created RFC destination using TCP/IP and registered program. same parameters i am mentioning in XI.
FUNCTION z_bank_reconciliation.
""Local interface:
*" IMPORTING
*" VALUE(COMP_CODE) TYPE BUKRS
*" VALUE(HOUSE_BANK) TYPE HBKID
*" VALUE(ACCOUNT_ID) TYPE HKTID
*" TABLES
*" CHQDETAILS STRUCTURE ZPAYR
DATA: itab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: jtab LIKE payr OCCURS 0 WITH HEADER LINE.
DATA: it_bank LIKE zbankrecon OCCURS 0 WITH HEADER LINE.
DATA: it_bank1 LIKE zpayr OCCURS 0 WITH HEADER LINE.
TYPES : BEGIN OF ty_bseg ,
bukrs LIKE bseg-bukrs,
hbkid LIKE bseg-hbkid,
belnr LIKE bseg-belnr,
zlsch LIKE bseg-zlsch,
kostl LIKE bseg-kostl,
hkont LIKE bseg-hkont,
bzdat LIKE bseg-bzdat,
END OF ty_bseg.
TYPES : BEGIN OF ty_t012 ,
bukrs LIKE t012-bukrs,
bankl LIKE t012-bankl,
bankn LIKE t012k-bankn,
END OF ty_t012.
TABLES : payr, t012, t012k, bseg.
DATA : itpayr LIKE zpayr OCCURS 0 WITH HEADER LINE,
itt012 TYPE STANDARD TABLE OF ty_t012,
itbseg TYPE STANDARD TABLE OF ty_bseg,
wa_itt012 TYPE ty_t012,
wa_itbseg TYPE ty_bseg,
total TYPE n.
SELECT * FROM zbankrecon INTO TABLE it_bank
FOR ALL ENTRIES IN itab
WHERE chequeno EQ itab-chect.
SELECT abukrs abankl b~bankn
INTO CORRESPONDING FIELDS OF TABLE
itt012 FROM t012 AS a
INNER JOIN t012k AS b ON bbukrs = abukrs AND b~hbkid =
house_bank AND b~hktid = account_id
WHERE abukrs = comp_code AND ahbkid = house_bank.
DELETE ADJACENT DUPLICATES FROM itt012.
SELECT zbukr hbkid hktid vblnr gjahr zaldt checf chect znme1 rwbtr
waers zaldt zbnkl FROM payr INTO CORRESPONDING FIELDS OF TABLE itpayr
WHERE ( zbukr = comp_code AND hbkid = house_bank ) AND hktid =
account_id.
SELECT bukrs hbkid belnr zlsch kostl hkont bzdat FROM bseg INTO TABLE
itbseg
WHERE bukrs = comp_code AND hbkid = house_bank.
SORT itt012 BY bankl.
SORT itbseg BY belnr.
READ TABLE itt012 INTO wa_itt012 INDEX 1.
LOOP AT itpayr.
read table itbseg into wa_itbseg with key bukrs = itpayr-zbukr
hbkid = itpayr-hbkid.
if sy-subrc = 0.
itpayr-kostl = wa_itbseg-kostl.
itpayr-hkont = wa_itbseg-hkont.
itpayr-bldat = wa_itbseg-bzdat.
itpayr-zlsch = wa_itbseg-zlsch.
endif.
itpayr-zbnkl = wa_itt012-bankl.
itpayr-zbnkn = wa_itt012-bankn.
MODIFY itpayr.
APPEND itpayr TO chqdetails.
ENDLOOP.
LOOP AT chqdetails.
READ TABLE it_bank WITH KEY chequeno = chqdetails-chect.
IF sy-subrc NE 0.
MOVE chqdetails TO it_bank1.
APPEND it_bank1.
CLEAR it_bank1.
ENDIF.
ENDLOOP.
REFRESH chqdetails.
chqdetails[] = it_bank1[].
LOOP AT it_bank1.
MOVE : it_bank1-chect TO zbankrecon-chequeno,
sy-datum TO zbankrecon-check_date,
sy-uzeit TO zbankrecon-check_time.
INSERT zbankrecon.
CLEAR zbankrecon.
ENDLOOP.
ENDFUNCTION. -
Call function module in backgrouns task and in update task
Hi Gurus,Pls crear me on the " <b>Call function module in backgrouns task and in update task</b>".
how it works and waht is the link with LUW releated to these .
also heard that commit work statement aslo linked with this.
Pls clarfiy me with expalnation of code.Hi sridhar,
the explanation already given is correct and good. Small add-on:
All functions called during one LUW with addition IN UPDATE TASK are stored together with their actual parameters in a temporary memory area. The moment a COMMIT WORK is issued, the functions are released to be executed by a so-called update task which is running in the background. This explains why functions called in update task never return anything, no SY-SUBRC and no export or table parameters If a function called in update task raises an exception or runs into an error the calling user will get an express message informing about this. Also, all database updates done by this update process are rolled back to keep consistency.
This proceeding helps to keep database tables consistent and allows the user to keep on doing his work before all database updates are complete. You may have seen messages like "material will be changed" after saving. If you open the same material immediately, you'll get a message "object locked by...<yourself>". This means the update task is still running.
Regards,
Clemens -
Problem in Call function .. starting new task
Hi,
I want to execute a dialog program in background. I am trying to use call function starting new task.
I am facing some syntax issue. Can any one guide me how to use call function starting new task. The function module is RFC FM. Do we need to define task some where before use please guide.
Thanks in advance. A sample program will be gr8.Hi,
Incase you want to call a RFC FM in background you can call ity like this.
call function 'Y_L_TO_CREATE_HUPAST' in background task
exporting
venum = y_v_venum
backg = 'X'
buser = y_lv_uname
langu = sy-langu
objky = y_lv_objky
printer = y_lv_printer.
Here Y_L_TO_CREATE_HUPAST is a RFC FM.
Regards,
Ankur Parab -
Webgui - function module starting new task
Hello,
we want to call a function module which opens a new task from a webgui transaction. This webgui transaction is integrated into EP 6.0.
Does anybody know how to handle this matter?
Thanks in advance and best regards,
PetraHi Petra,
"call function .... starting new task " creates a new external session for the current login session. This is the same as doing a /o or "system - Create session". Due to technical restrictions in webgui only one external session is possible.
Best regards,
Klaus -
Calling function modules in background task
Hi All,
I am creating a notification in the background and linking it to an order. This I am doing inside a function module which is called in background task as a separate unit. I should change the user status of this newly created notification. This I am doing in another FM called as a separate unit. Now my requirement is that, I need to perform the status change only after the new notification is committed to the database. I would like to know if i can provide some time lag between the 2 FM execution. Can anyone tell me how much time will be consumed to commit the data to the database tables irrespective of the length of the data. Say for example, if i have hundreds of notifications within the object list tab of an order, I want to know what is the maximum time it will take to commit this to the database table so that I can put a wait conditionat the stat of the second FM call.
ThanksOk thanks. But let me tell you 1 thing, actually I am calling these 2 FMs within an enhancement section just before another FM CO_ZV_ORDER_POST which is actually doing a commit work. So is it OK if I call the 1st FM in background task and the second FM in update task in the same place as I am calling the FMs now(i.e., before CO_ZV_ORDER_POST)?
-
Call function module in update task
Hi
I am using the follwoing logic in my prog
CALL FUNCTION 'Z_Update _Task' In update task
EXPORTING
t_vbak = t_vbak.
But the program goes to dump at call function
Please let me know if the syntax i am using is correct.
Edited by: kittu reddy on Feb 28, 2008 5:29 AMIt might be the type conflict . Please check once .
Here am giving some information abt UPDATE TASK.
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single
database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Thanks
Jagadeesh -
Calling function module in background task
Hello,
There is one function module which is called in background task. Is there any chance that background task is not created and function module is not executed. That function module is supposed to send some outbound message. The FM is called in one user exit. I don't have any idea as why it is called as background task. The probem is that this message is not getting send sometimes.(sometimes it gets send ). Because of this I am not able to make any conclusion.
Please respond if anyone has come across such scenario before.
Thanks in advance,
MinalCheck the below link...it might be helpfull
It should be executed....check it with different data as to what might fail
http://help.sap.com/saphelp_nw04/helpdata/EN/8f/53b67ad30be445b0ccc968d69bc6ff/content.htm
http://help.sap.com/abapdocu/en/ABAPCALL_FUNCTION_BACKGROUND_TASK.htm -
Calling Function Module starting new job
Hallo !
I'm calling a 'Z' function module from a class method.
I want the calling will start immediately a new job.
(That I will see in SM37)
(Like we can do with submit statement)
Is there a way to this ?
(I need the function will start a job - because
I want to save the function log in the Job list.)
Thanks in advance,
N.S.step : 1
Sample Program: Creating a Job with JOB_OPEN
<b>explanation :</b>
Use JOB_OPEN to create a background job. The function module returns the unique ID number which, together with the job name, is required for identifying the job.
Once you have "opened" a job, you can add job steps to it with JOB_SUBMIT and submit the job for processing with JOB_CLOSE.
Create your job with JOB_OPEN. The module returns a unique job
number. Together with the jobname, this number identifies the
job. Other parameters are available, but are not required.
JOBNAME = 'Freely selectable name for the job(s) you create'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = JOBNAME
IMPORTING
JOBCOUNT = JOBNUMBER
EXCEPTIONS
CANT_CREATE_JOB = 01
INVALID_JOB_DATA = 02
JOBNAME_MISSING = 03
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
step 2;
Sample Program: Adding an ABAP Job Step
<b>explanation :</b>
Use JOB_SUBMIT to add a job step to a background job that you have opened with JOB_OPEN.
A job step is an independent unit of work in a job, the execution of an ABAP or external program. Each job step can have its own authorizations user and printer/optical archiving specifications.
Add a job step: ABAP program
CALL FUNCTION 'JOB_SUBMIT'
EXPORTING
AUTHCKNAM = SY-UNAME " Runtime authorizations
" user
JOBCOUNT = JOBNUMBER " Value from JOB_OPEN
JOBNAME = JOBNAME " Value from JOB_OPEN
REPORT = 'REPORT' " Report to be run
VARIANT = 'VARIANT' " Variant to use with
" report
PRIPARAMS = USER_PRINT_PARAMS " User printing options
ARCPARAMS = USER_ARC_PARAMS " User archiving options
" Both sets of options
" come from
" GET_PRINT_PARAMETERS
EXCEPTIONS
BAD_PRIPARAMS = 01
INVALID_JOBDATA = 02
JOBNAME_MISSING = 03
JOB_NOTEX = 04
JOB_SUBMIT_FAILED = 05
LOCK_FAILED = 06
PROGRAM_MISSING = 07
PROG_ABAP_AND_EXTPG_SET = 08
OTHERS = 99.
step 3
Sample Program: Immediate Start with JOB_CLOSE
<b>explanation :</b>
Use JOB_CLOSE to pass a background job to the background processing system to be run. Once you have "closed" a job, you can no longer add job steps to it or change job/job step specifications.
The function module returns an indicator as to whether the job was automatically released or not. A job is automatically released to run only if the user who scheduled the job has RELE release authorization for the authorization object Operations on background jobs.
A job step is an independent unit of work in a job, the execution of an ABAP or external program. Each job step can have its own authorizations user and printer/optical archiving specifications.
Submit job for processing: immediate start
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = JOBNUMBER " Job identification: number
JOBNAME = JOBNAME " and name.
STRTIMMED = 'X' " Schedules the job for
" immediate start. The job
" is started immediately
" only if the user has the
" RELE authorization to
" release a job to run.
IMPORTING
JOB_WAS_RELEASED = JOB_RELEASED " If user has authorization
" to release jobs to run, job
" is automatically released
" when it is scheduled. This
" field is set to 'x' if the
" job has been released.
" Otherwise, the job is sche-
" duled but must be released
" by an administrator before
" it can be started.
EXCEPTIONS
CANT_START_IMMEDIATE No longer used. Replaced by IMPORTING
parameter JOB_WAS_RELEASED.
INVALID_STARTDATE = 01
JOBNAME_MISSING = 02
JOB_CLOSE_FAILED = 03
JOB_NOSTEPS = 04
JOB_NOTEX = 05
LOCK_FAILED = 06
OTHERS = 99.
IF SY-SUBRC > 0.
<Error processing>
ENDIF.
in step 1 we will create a job with name etc..
in step 2 we will assign work to this job
step 3 : we will close the job inorder make it scheduled .
Regards
srikanth
added descriptions to each steps
Maybe you are looking for
-
My iPhone5 is my wifi hot spot for my mac minim computer and iPad. I live in a rural area with no other options. Will this be sufficient to run Apple TV and air play?
-
Weird Issue with session collection creation
Hello everybody, While building a fully redundant RDS infrastrcutre I cam across this issue While creating the session collection through Server Management on Windows Server 2012 R2 I get the following error: "Unable to configure the RD Session Host
-
Capturing data from a dynamic table that span multiple pages
I created a PDF form that contained a dynamic table that can span across multiple pages. Additional rows in the table can be created by the person filling the form as and when needed. The PDF form is distributed to the receipient using Adobe LiveCycl
-
Iphoto 08 Exporting does not appear to Resize photos
Trying to export photos and fit them on a disk for a digital photo frame. Even though I selected the smallest file and lowest quality, I received the message that they were too large for the disk. It was a 512 mb disk and according to file info when
-
Make send email action open in a different tab or window
Made text a link in a smart shape with Cp7.Due to a shortcoming in the Google Chrome browser the email client doesn't open. So, I click the back button and it goes back to the first slide of the project. I am not looking for a resolution of the Chrom