Capturing data from a dynamic table that span multiple pages

I created a PDF form that contained a dynamic table that can span across multiple pages. Additional rows in the table can be created by the person filling the form as and when needed.
The PDF form is distributed to the receipient using Adobe LiveCycle Designer.
However, when the form is "Submitted" back to the originator of the form, only data in the first row of the table is captured in the Response file. All the other rows are left out.
I would be grateful if anyone can advise me as to how do I or what shall I do to get all the data in all the rows in the table into the Response File?
Thank you.

Hi
Attached are the saved completed PDF-Form and the response file after the completed form has been submitted. I have copied this message to your gMail account.
Only data in the first row of the table is captured in the Response file.
If it is working correctly on your side, please let me know what could have gone wrong on my side.
Thank you.
Best regards,
Kim-Siang Ng
http://www.tipstoenrichyourlife.com/parenting
With the wish to help all beings, may all my thoughts,words,and actions be void of attachment and ego.
May they arise from compassion and wisdom.
May they be imbued with patience and joy.
The information contained in this transmission may contain privileged and confidential information and is intended only for the use of the person(s) named above. If you are not the intended recipient, any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you received this email in error, please contact the sender immediately by reply e-mail and destroy all copies of the original message. This email is not intended as an offer or solicitation for the purchase or sale of any financial instruments.
This email is forwarded automatically to a selected list of my buddies for enjoyment. Contents come from various sources and none of the materials I claim as my property. If any belongs to you, please consider it an honor that the content was worthy enough to be shared. No copyright infringement intended!. If any material is not appealing to you DELETE immediately.
When forwarding this email, please have the courtesy to respect the privacy and confidentiality of the sender by deleting all previous email trails and addresses before you proceed to forward this email to others.

Similar Messages

Creating a dynamic table that spans multiple pages

Hi guys,
I have a script that is able to add rows to a dynamic table.
The issue I am having now is I want this dynamic table to span multiple pages.
I'm not exactly sure how to do this. It looks like to me that the table stops once it reaches the height of the text frame enclosing it.
How do you create a table / text frame that expands to it's contents and not the size of the text frame enclosing it. Ideally I want this table to span multiple pages.

OK, I have 3 screenshot to see if that will help. My book is a transcription of some old county records around 1800. I have a section of my book that had a list of items in text separated by a right tab.
I highlighted that text and converted it to a table. In portrait mode I can scroll and see all the table.
When I switch to landscape mode the table is cut off and does not wrap to the next page.
The text after the table appears on the next page. The preview on the ipad is the same.
Thanks for any help on figuring this out. Also, I enjoy your podcasts.
MB

Collect data from a dynamic XML file into multiple internal tables

I need to convert the XML file into multiple internal tables. I tried many links and posts in SDN but still was facing difficulty in achieving this. Can some one tell me where I am going wrong.
My XML file is of the following type.It is very complex and the dynamice.
The following tags occur more than once in the XML file. The "I" and "L" tags and its child tags can occur ones or more than once for each XML file and it is not constant. i.e in one file they can occur 1 time and in another they can occur 100 times.
"I" and "L" are child tags of <C>

 <J>10</J>
 <K>EN</K>

<L>
 <J>20</J>
 <N>BB</N>
</L>
Tags <C> and <F> occur only ones for each XML file. <C> is the child tag of "A" and "F" is the child tag of <C>.
I need to collect <D>, <E> in one internal table ITAB.
I need to collect <G>, <H> in one internal table JTAB.
I need to collect <J>, <K> in one internal table KTAB.
I need to collect <J>, <N> in one internal table PTAB.
Below is the complete XML file.
?xml version="1.0" encoding="iso-8859-1" ?>
<A>
 
 <C>
 <D>RED</D>
 <E>999</E>
 <F>
 <G>TRACK</G>
 <H>PACK</H>
 </F>
 
 <J>10</J>
 <K>EN</K>
 
 
 <J>20</J>
 <K>TN</K>
 
 
 <J>30</J>
 <K>KN</K>
 
 <L>
 <J>10</J>
 <N>AA</N>
 </L>
 <L>
 <J>20</J>
 <N>BB</N>
 </L>
 <L>
 <J>30</J>
 <N>CC</N>
 </L>
 </C>
</A>
With the help of SDN I am able to gather the values of <D> <E> in one internal table.
Now if I need to gather
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
I am unable to do. I am following XSLT transformation method. If some one has some suggestions. Please help.
Here is my ABAP program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\TEMP\ABCD.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ITAB,
 D(10) TYPE C,
 E(10) TYPE C,
 END OF ITAB.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_ITAB TYPE STANDARD TABLE OF ts_ITAB,
 gs_ITAB TYPE ts_ITAB.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = gs_file
CHANGING
 data_tab = gt_itab1
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IITAB".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'IITAB'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
 CALL TRANSFORMATION zxslt
 SOURCE XML gt_itab1
 RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Now let's see what we got from the file
LOOP AT gt_ITAB INTO gs_ITAB.
WRITE: / 'D:', gs_ITAB-D.
WRITE: / 'E :', gs_ITAB-E.
ENDLOOP.
Transformation
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <IITAB>
 <xsl:apply-templates select="//C"/>
 </IITAB>
 </asx:values>
 </asx:abap>
</xsl:template>
<item>
 <D>
 <xsl:value-of select="D"/>
 </D>
 <E>
 <xsl:value-of select="E"/>
 </E>
 </item>
</xsl:template>
</xsl:transform>
Now the above pgm and transformation work well and I am able to extract data into the ITAB. Now what changes should I make in transformation and in pgm to collect
<G>, <H> in one internal table JTAB.
<J>, <K> in one internal table KTAB.
<J>, <N> in one internal table PTAB.
Please help..i am really tring hard to figure this out. I am found lot of threads addressing this issue but not my problem.
Kindly help.
Regards,
VS

Hi Rammohan,
Thanks for the effort!
But I don't need to use GUI upload because my functionality does not require to fetch data from presentation server.
Moreover, the split command advised by you contains separate fields...f1, f2, f3... and I cannot use it because I have 164 fields. I will have to split into 164 fields and assign the values back to 164 fields in the work area/header line.
Moreover I have about 10 such work areas. so the effort would be ten times the above effort! I want to avoid this! Please help!
I would be very grateful if you could provide an alternative solution.
Thanks once again,
Best Regards,
Vinod.V

Fill dynamic internal table with data from another dynamic table

Hi,
I have a huge dynamic table with a few columns and need to fill another dynamic table with some of the columns, that are also existing in the other one. I first know at runtime, which fields the smaller table contains.
Until now, I did it that way:
LOOP AT <it_tab_structure> ASSIGNING <wa_tab_structure>.
 LOOP AT lt_comp_full INTO ls_comp_full.
 ASSIGN COMPONENT ls_comp_full-name OF STRUCTURE <structure> TO <column>.
 ASSIGN COMPONENT ls_comp_full-name OF STRUCTURE <wa_tab_structure> TO <value>.
 <column> = <value>.
 ENDLOOP.
 APPEND <structure> TO <table>.
ENDLOOP.
lt_comp_full contains the columns of the second table, that have to be filled.
This is taking a very long time, as there can be a lot of columns in the source table and the source table contains at least 100000 records.
Is there therefore any way to fill the other table faster?
Thank you & best regards,
Michael

Hey Sharath,
thank you for your answer! Unfortunately I don't have a 7.4 system here, but your example pointed out, that I can also use move-corresponding from one structure to the other, which I thought, was not possible. I'm trying out, if this makes it faster now.
I'll let you all know, if this made the deal.
Thank you & best regards,
Michael & Arne

How do I select rows from the same table that have multiple occurances

Hi Everybody,
I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all values in one column and any in the other.
desc SCV
ID NUMBER PK (ID + SCRID)
SCRID NUMBER FK(SC)
ID SCRID
1 1
2 1
3 1
4 2
5 2
6 3
7 4
8 4
desc PROJECTS
ID NUMBER PK
NAME VARCHAR2(100)
ID NAME
1 PROJECT1
2 PROJECT2
3 PROJECT3
4 PROJECT4
desc PJS
ID NUMBER
PROID NUMBER FK (PROJECTS)
SCRID NUMBER FK (SCV(SCRID + SCVID)
SCVID NUMBER
ID PROID SCRID SCVID
1 1 1 1
2 1 1 2
3 1 2 5
4 1 3 6
5 1 4 7
6 2 1 3
7 2 2 4
8 2 2 5
9 2 4 7
There are over 1 million records in PJS.
desc TBP
SCRID NUMBER
SCVID NUMBER
SCRID SCVID
1 1
1 2
1 3
2 4
2 5
3 6
4 7
4 8
The requirement is to select projects that have matching SCRID, SCVID from TBP such that
all distinct SCRID should match and within that and any SCVID match will do. (A "AND" between each SCRID and an "OR" for each SCVID in that SCRID like 'SCRID = 1 AND (SCVID = 1 OR SCVID = 2 OR SCVID = 3) AND SCRID = 2 AND (SCVID =....)
So, for the sample data it should return us PROID = 1
I have few queries written for this:
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 1
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 2
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 3
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 4
This query performs well but the cost is very high, hardcoding, sorting.
The 2nd option is to:
SELECT pjs.PROID proid
FROM TBP tbp,
PJS pjs
WHERE pjs.SCVID = tbp.SCVID
AND pjs.SCRID = tbp.SCRID
GROUP BY pjs.PROID
HAVING COUNT(DISTINCT pjs.SCRID) = (SELECT COUNT(DISTINCT SCRID ) FROM TBP)
This has a low cost but runs slowly.
One more way I tried was with the IN operator like
SELECT DISTINCT PROID FROM PJS A,TBP T WHERE T.SCRID = 1 AND T.SCVID = A.SCVID
AND PROID IN (SELECT PROID FROM PJS A,TBP T WHERE T.SCRID = 2 AND T.SCVID = A.SCVID
AND PROID IN (...SO ON with each DISTINCT SCRID.
Again this involves too much of sorting.
Any help will be appriciated.
Thanks in advance.

Hi Andrew,
Use DELETE t_itab statement inside the loop.
I have modified your code. It is perfectly working.See bellow -
LOOP AT it_zmember01 INTO wa_zmember01.
WRITE: / wa_zmember01-mnumber UNDER 'NUMBER',
wa_zmember01-mname UNDER 'NAME',
wa_zmember01-mdob UNDER 'DOB'.
WRITE / '-----------------------------------------------------------------'.
DELETE it_zmember01. " Modified
ENDLOOP.
DELETE it_zmember01. statement inside the loop will delete the current row of the table.
Regards
Pinaki

How can I copy text spanning multiple pages in iBook?

I like to drop sections of text from i
books into letters, journal entries etc and for the life of me I cannot figure out the functionality of grabbing text that spans multiple pages.

Hi James,
Thank you so much for taking the time to help me out. You actually solved the problem. I am able to select as much text as I want now. The bummer is the lame feature where you cannot take more than a couple hundred words at a time. The section I wanted was about one and a half pages and it took me 3 separate copy pastes to get it all. Does anyone know of software or a trick to overcome this limitation?
James thanks again. I really appreciate your help.

Filling dynamic internal table with data from other internal table

Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best Regards

Hi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji

Capturing Data from forms before it is stored in the table

Hi...I would like to capture data from a form before the data is stored in the database. that is, i would like to access whatever data is entered into a field right after the user pushes the Insert button. I would like to do some processing on the data and then store it in the table along with the data from the other fields. Is it possible to access it through a bind variable or something? Please tell me how to go about it. Thanks

Hi,
You can make of the session variables to access the values. Every field in the form has a corresponding session variable with the name "A_<VARIABLE_NAME>". For example for deptno the session variable will be "A_DEPTNO"
Here is a sample.
declare
flightno number;
ticketno varchar2(30);
tdate date;
persons number;
blk varchar2(10) := 'DEFAULT';
begin
flightno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_FLIGHT_NO');
ticketno := p_session.get_value_as_varchar2(
p_block_name => blk,
p_attribute_name => 'A_TICKET_NO');
tdate := p_session.get_value_as_date(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE');
persons := p_session.get_value_as_number(
p_block_name => blk,
p_attribute_name => 'A_NOF_PERSONS');
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_FLIGHTNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TICKETNO',
p_value => to_char(NULL)
p_session.set_value(
p_block_name => blk,
p_attribute_name => 'A_TRAVEL_DATE',
p_value => to_char(NULL)
end;
In the above example the values of the variables are got into temporary variables and session variabels are set to null.
Thanks,
Sharmil

How to transfer data from a dynamic internal table

Hi All
I want to transfer data from a dynamic internal table<dyn_table>
to a non dynamic internal table itab which should have the same structure as <dyn_table>.
How can this be done?
Regards,
Harshit Rungta

As stated earlier this can be done only through field symbols...
You cannot create an non dynamic internal table with ANY structure...using DATA statement
If the strucutre is defined well and good...you can create an non-dynamic internal table...
If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
DATA: lv_ref TYPE REF TO data.
FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
* You create a dynamic internal table...
CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
ASSIGN lv_ref->* TO <fs_dyn_table>.
Now...do the transfer.
<fs_dyn_table> = "your_dynamic_internal_Table
Hope it helps!

Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

Hi,
I'm doing a internship in a production line.
My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
I would like to know who can give me an idea of how I could plot as much data and analysis.
Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
How could I compare, analyze and graph for example:
Five columns of production (input) with five (5) columns tested (data output).
After graphing.
Someone can give me a technique to analyze data? ie I compare column by column?
or some other technique? as a conglomerate could analyze data?
o give you an idea of the contect, now I perform an internship in a manufacturing turbines.
My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't take all the data from the source table.
I appreciate your advice
Thanks

You can declare as PT source whole Columns [$A:$E], without rows number.
Then You'll have all actually data.
Oskar Shon, Office System MVP - www.VBATools.pl
if Helpful; Answer when a problem solved

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Create data reference to a table that is known at runtime

Hi,
I am trying to create a data reference to a table that is known only at runtime. In system 4.6C, I am not able to insert this coding
data: lr_data type ref to data.
CREATE DATA lr_data type table of (structure_name).
In hihger releases, I am able to do so.
Could you please tell me how to solve this problem in 4.6C?
Best regards,
Fabian

Hi fabian,
If i understood,
u want to create a dynamic internal table.
1.
For this purpose,
in my program,
there is an INDEPENDENT FORM
whose inputs are
TABLE NAME / STRUCTURE NAME
and from those, it consructs dynamic table.
2. Here is the program.
the dynamic table name will be
<DYNTABLE>.
3. U can use this program (FORM in this program)
to generate any kind of internal table
by specifying TABLE NAME .
4.
REPORT abc.
COMPULSORY
FIELD-SYMBOLS: <dyntable> TYPE ANY TABLE.
FIELD-SYMBOLS: <dynline> TYPE ANY.
DATA: lt TYPE lvc_t_fcat.
DATA: ls TYPE lvc_s_fcat.
FIELD-SYMBOLS: <fld> TYPE ANY.
DATA : fldname(50) TYPE c.
parameters : iname LIKE dd02l-tabname.
START-OF-SELECTION.
PERFORM
PERFORM mydyntable USING lt.
BREAK-POINT.
INDEPENDENT FORM
FORM mydyntable USING ptabname.
Create Dyn Table From FC
FIELD-SYMBOLS: <fs_data> TYPE REF TO data.
FIELD-SYMBOLS: <fs_1>.
FIELD-SYMBOLS: <fs_2> TYPE ANY TABLE.
DATA: lt_data TYPE REF TO data.
data : lt TYPE lvc_t_fcat .
DATA : ddfields LIKE ddfield OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'DD_NAMETAB_TO_DDFIELDS'
EXPORTING
tabname = iname
TABLES
ddfields = ddfields.
CONSTRUCT FIELD LIST
LOOP AT ddfields.
ls-fieldname = ddfields-fieldname.
APPEND ls TO lt.
ENDLOOP.
ASSIGN lt_data TO <fs_data>.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
Assign Dyn Table To Field Sumbol
ASSIGN <fs_data>->* TO <fs_1>.
ASSIGN <fs_1> TO <fs_2>.
ASSIGN <fs_1> TO <dyntable>.
ENDFORM. "MYDYNTABLE
regards,
amit m.

Capturing data from additional subform instances

I have a form with push buttons to add and delete additional instances of a subform containing fields. WHen I distribute the form and the form is returned, any additional instances of the subform are not captured and added to the dataset. Any ideas?
Thanks for your help....
Lane

Thanks Niall for the prompt response. I had actually come across both examples in my searching, however my form contains one table on a page. If the user clicks a button (Add Another Location) the form replicates this page (along with a number of other pages, thus giving me a new blank table). It is at this point that I would like the option of being able to copy the data from the first table instance into the second and so on but only if needed (hence the idea of using a checkbox to trigger the process).
Hope this sheds a little more light on my problem.
If this is somewhat confusing I'm more than happy to send you a copy of the file so you can have a look.
Regards
Michael

Read data from STATIC internal table during round trip in DO_PREPARE_OUTPUT

Dear Gurus
I have a requirement where I need to select some data from the database table BUT_HIER_NODE_D.
After SELECTING this data to an internal table (say ITAB), I am displaying this data in a table view. I was able to achive this functionality by putting some code in the DO_PREPARE_OUTPUT method.
Now according to my requirement, after the above data has been displayed on the screen initially, the user will click on any row. After clicking on a particular row, I need to capture the document number on that particular row and need to display all its child document numbers in a separate table. I am able to achive this functionality also.
Initially I am not sure of how to READ the same internal table (ITAB) again and again by avoiding the SELECT query upon each round trip (between CRM and Web).
After some research, I understand that I might have to use STATIC internal table to store the data during the
initial SELECT. This way, upon each round trip, I can READ the data from the same internal table.
My question: But now, when I tried to create a STATIC internal table in DO_PREPARE_OUTPUT, it is not allowing me to declare this table because DO_PREPARE_OUTPUT method is a INSTANCE method.
I didn't find any STATIC methods in the IMPL class of the view.
I would really appreciate if somebody can help me on how to proceed further.
Thanks
Raj

Hi Bharathy / Adil / Masood
Thank you very much for the replies. I declared a static method inside the IMPL class and I was calling this method inside the DO_PREPARE_OUTPUT method. Looks like it is working fine for me...will comeback if I had any further issues.
Masood
As per my requirement, I need to Select the data into the internal table during the very first step, then I need to continuosly read the data from this internal table upon every round trip. So I am not sure if I would be able to use the method DO_INIT_CONTEXT. Because I need a method which will trigger upon each round trip and will also hold the data of this internal table. So right now, the only option for me is DO_PREPARE_OUTPUT method.
Plz let me know if am doing in the right way.
Thanks
Raj

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

Capturing data from a dynamic table that span multiple pages

Similar Messages

Maybe you are looking for