Call ITS SAP R3 from CRM WebClient using parameter NOHEADEROKCODE=1

Good day,
I need some help with an issue.
We want to hide the command field in the SAP GUI for HTML using parameter ~noHeaderOkCode.
[http://help.sap.com/erp2005_ehp_04/helpdata/EN/49/f7cf3f06bd3946e10000000a114084/frameset.htm]
But we want to hide it only when we access the R3 transactions from the CRM WebClient, not in the rest of uses of R3 ITS SAP GUI for HTML. The CRM WebClient launchs some transactions of SAP R3 inside its web, and we want users not to call another transactions there by using the command field.
I've been reading about alias and external alias, but not resolved our issue.
I'll appreciate any help.
Best regards,
Martina

Hi Martina,
one option might be to create a ZWEBGUI service for your CRM WebClient. i.e A copy of the WEBGUI service with the parameter ~NOHEADEROKCODE1 set in its parameters section.
You could also then restrict access to the NEW service to your CRM Users.
See the WIKI:
[How to limit access to an ITS service to specific users? |http://wiki.sdn.sap.com/wiki/x/1wCmB ]
Regards,
Oisin

Similar Messages

Can a report in ERP called from CRM system using RFCs??

Hi All,
Please let me know if this is possible, if so , how?
Can a report in ERP called from CRM system using RFCs??
Thanks
Siva

Yes, you should make an RFC function in ERP and inside the
function you can call the report with a SUBMIT. Then in CRM you can call the RFC function...
Best regards,
Iván
P.D.: Give points if answer helps!!

Call R/3 BADI from CRM

Hello Experts,
I have to implement some BADIs in R/3 which will get executed through CRM.
What are the various options of calling the BADI in R/3 from CRM? The BADIs are used for sales order processing, invoicing, etc....
Thanks
Ricky

Hi Ricky,
   It is might not possible to call BADI R/3 from CRM or CRM from R/3.
   This is possible in case of only RFC enabled FM.
   Could you provide information realated to your problem, so that one could guide you properly.
Regards,
Amit R.

Calling ERP Web Dynpro from CRM Opptunity with parameters

Hi, experts!
In CRM7.0, I'm calling ERP Web Dynpro from CRM Opptunity.
We've added a button in Opptunities and the buttom can navigate into ERP Web Dynpro.It works fine.
Now, I'm trying to move the value of Opptunity ID to a field in ERP Web Dynpro when we push the buttom. That's a problem I want to solve. We're struggling to move the value, but it doesn't work.
We uses the following settings:
1) We call Z- Logical Links generated by Transaction Launcher when we push the buttom.
2) We define Transaction Parameters in a Transaction Launcher Wizard(Step5). We've set "//clipboardBTOrder/BTOrderHeader/OBJECT_ID" or "//datacontextCURRENTBT/BTOrderHeader/OBJECT_ID".
But both of them doesn't get any value.
3) If you set SYST data or constants in Transaction Launcher Wizard(Step5), you can find the data in ERP Web Dynpro.
Does anyone know which parameter gets the value of current opptunity data?
Or if you have any tips to create URLS using programing, could you please share the information with me?
BestRgards.
Miki

Does anyone have tips??

Call RFC(in R3) from CRM

Hi,
I am trying to call a RFC from CRM. I developed that FM in R3.
and trying to call like ..
CALL FUNCTION Function_Name
EXPORTING
IMPORTING
But when I run from CRM, in runtime it is terminated.
Please suggest a way to call FM (in R3) from CRM.
Thanks,
Gaurav

You need to specify the destination.It is the RFC name to R/3.
CALL FUNCTION Function_Name destination <lvdest>
EXPORTING
IMPORTING
If this doesn't solve your issue , Pls provide the termination message .

Call a function module from CRM 5.0 via ITS to FICA

Hi
I want to call a function module in FICA (FICA is using sapgui) from CRM (IC-web) via ITS (Not integrated in FICA)
Is it possible and how should this be done???
If someone know how, please help
BR//JL

generally RFCs should not have user dialogs.
any how to handle your case, you need ITS and since FICA is a WAS 6.20 system, you need to have a ITS installed for FICA system, without which you cannot do that.
alternatively you can mimic the functionality of the RFC by programming the same in a BSP and call this from CRM system
Regards
Raja

Calling a Web Service from CRM 620

I prototyped from ECC 640 and created a client Proxy to call a WebService. However, Does anyone know if it is possible to call a WebService from CRM 620? If so, how do you do it. So far I have found documentation to create Server Proxies but not client proxies.
I attempted to import the wsdl to XI as an external definition, then in CRM executed transaction: SPROXY to bring in the wsdl definition. This did not work....
Here is our landscape:
-CRM 4.0 with XI-addon 2.0 & kernel patch level 1253
-XI 3.0 SP 15
thanks
-steve

Welcome to SDN.
CRM 620 - i have no knowledge on CRM, but i guess its on WAS6.20. if yes you can consume websevice using CL_HTTP_CLIENT class.
check out the following weblog for details.
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Configure to call a BI query from CRM

Hi,
I created a BI query in the BI system and I want to get it called from CRM 2007 web UI. There is a RFC connection between CRM and BI. Can anybody can list out all settings/configuration required to set inorder to list this query in the Web UI.
Thanks in advance
Nisha

found this document on using the FPM_SEARCH_UIBB http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f07c2765-4ee8-2e10-759b-ea7429a430bb?QuickLink=index&…
if only such a (extremely detailed) document would exits on passing on the "tag" to the BI query variable (as that is not as straight forward)

How to call a SAP service from adobe flex

Hi experts,
I need to call a webservice create from SAP BAPI my URL is: http://xxxxxxxxx:8000/sap/bc/srt/wsdl/bndg_DD90E166ACE1B1F18AD8001B789FF0AD/wsdl11/allinone/ws_policy/document?sap-client=200, with this URL I can test the webservice from WsNavigator.
The operation is ZimrfcVerifOtUbica and the input structure is:
ZimrfcVerifOtUbica
> PiNumeroAlmacen (input parameter)
> PiOTransporte (input parameter)
The output structure is:
ZimrfcVerifOtUbicaResponse
>PoMessage (output parameter)
I've created a view with two inputfield (one to PiNumeroAlmacen, one to PiOTransporte), one button and one label (to put the result value).
but I don't know how to call the WS, I tried with this code:
<mx:WebService id="ZCCONVERTERService"
     wsdl="http://xxxxxxxxx:8000/sap/bc/srt/wsdl/bndg_DD90E166ACE1B1F18AD8001B789FF0AD/wsdl11/allinone/ws_policy/document?sap-client=200;" useProxy="false" >
          <mx:operation name="ZimrfcVerifOtUbica" resultFormat="e4x">
               <mx:request >
                    <PiNumeroAlmacen>AGR</PiNumeroAlmacen>
                    <PiOTransporte>01000</PiOTransporte>
               </mx:request>
          </mx:operation >
     </mx:WebService>
and I get this error: [RPC Fault faultString="Could not load WSDL" faultCode="Server.NoServicesInWSDL" faultDetail="No <wsdl:service> elements found in WSDL at ."].
I tried with actionscript and runtime library but I get this error: java.lang.Exception: Unsupported element in WSDL file: UnknownExtensibilityElement
I tried put in Data--> Import Web Service and I put the URL and I get Unable to load the WSDL. Specify another URI.
Other thing is for this webservice I've created a logic destination, and this webservice is used in a webdynpro aplication and works correctly. But now I need to use the same webservice in flex.
Could you help me to call to this webservice?
Thanks in advance.
Jose

I have could do it, but now I'm trying to do the same with a SAP standard service.
Any idea?
Regards,
Jose

Call R/3 BADI from CRM without XI

Hello Experts,
I have to implement some BADIs in R/3 which will get executed through CRM.
What are the various options of calling the BADI in R/3 from CRM? The BADIs are used for sales order processing, invoicing, etc....
Thanks
Ricky

I could suggest u with XI
1. Direct RFC call using RFC adapter
2. Expose RFC as webservice and use SOAP adapter
3. Use ABAP proxy to call RFC
Without XI: CRM would be a better place to search for the ans
Regards,
Parteek

Call R/3 BADIs from CRM

Hello Experts,
I have to implement some BADIs in R/3 which will get executed through CRM.
What are the various options of calling the BADI in R/3 from CRM? The BADIs are used for sales order processing, invoicing, etc....
Thanks
Ricky

Hi Ricky,
You may build a RFC enabled function module in R/3 and can call the same from CRM Badi's. If want to code a R/3 badi which would be enabled in normal order processing or invoicing process, then you don't have to put effort figuring out how to enable or call it from CRM, as it would be called as a part of normal processing once document is in R/3.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Calling Non SAP programe from SAP program

Hi Experts...
Can we cal Non SAP programs Like Windows EXE programs from ABAP programs ?
If yes Then How .....
Regards ...
..Ashish

Hi Ashish ,
Ya we can call a non SAP program from SAP program.
For example we can call a EXE program from the SAP program using the RFC connection created in SM59.
In Sm 59 you can create a TCP/IP connection and give the path of the executable there.

Error while calling .svc web service from pl/sql using utl_dbws

Hello Folks,
I am calling a .svc web service from pl/sql using utl_dbws and encountering the following error
javax.xml.rpc.soap.SOAPFaultException: The message with Action '' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None).
Can you help me find what am I doing wrong?
Thanks
Rk

Hi,
Here are the details
1. What version?
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
2. What error message ... we need the full and complete error stack not your interpretation of it.
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: The message with Action '' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Messag
3. "I am calling means what?" We need the full and complete statement showing the values of all parameters.
The input to the web-service is a xmltype containing address information and the web-service returns a string
CREATE OR REPLACE FUNCTION get_id
RETURN VARCHAR2
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.CALL;
l_wsdl_url VARCHAR2 (32767);
l_namespace VARCHAR2 (32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2 (32767);
BEGIN
l_wsdl_url := 'http://test.com/test.svc?wsdl';
l_namespace := 'http://test.org/';
l_service_qname := UTL_DBWS.to_qname (l_namespace, 'SName');
l_port_qname := UTL_DBWS.to_qname (l_namespace, 'BasicHttpBinding_ISName');
l_operation_qname := UTL_DBWS.to_qname (l_namespace, 'Iden');
l_service :=
UTL_DBWS.create_service
(wsdl_document_location => urifactory.geturi
(l_wsdl_url),
service_name => l_service_qname
l_call :=
UTL_DBWS.create_call (service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname
l_xmltype_in :=
SYS.XMLTYPE
('<IdenRequest xmlns:i="http://www.w3.org/XMLSchema-instance" xmlns="http://test.org/SNameIden.WCFService">
<address />
<zip>12345</zip>
<state>AA</state>
<street>W Test </street>
</address>
</IdenRequest>'
l_xmltype_out :=
UTL_DBWS.invoke (call_handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.EXTRACT ('//Iden/text()').getstringval();
RETURN l_return;
END;
/

Calling a web service from BPM without using bridge S/A

Hi Experts,
I want to call a web service from a BPM and I want to call it asyncronously. That is by having my request and my response as a separate interface.
I already did it by calling another BPM, this one with a bridge, but I don't like this solution.
Any ideas?
Regards
Gonzalo

Hi Sanjeev,
EDIT: I was wrong, I have to reconsider your scenario.
Leela,
Watch this:
http://img74.imageshack.us/img74/3536/presentacin2vm9.jpg
The points of my scenario:
-There's a BPM
-Send and Receive in BPM have to be asynchronous
-It have to comunicate with a WS wich is synchronous
-I thought that, may be, playing with the receiver SOAP adapter modules I will achieve to send the response to another SOAP adapter, a sender one, and then have my ASYNC/SINC scenario as it's described here: File - RFC - File without a BPM - Possible from SP 19.
Regards
Gonzalo
Edited by: Gonzalo del Castillo on Nov 20, 2008 11:29 AM

Calling Operating System Commands from PL/SQL using java

Calling Operating System Commands from PL/SQL - The Java Way
wlth help of given thread link,
Calling OS Commands from Plsql
but i had user privilege problem
Declare
x Varchar2(2000);
Begin
x := OSCommand_Run('/tmp/sri/GROUP_ho.sh');
DBMS_OUTPUT.Put_Line(x);
End;
o/p;
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
i done the grant privillage also
part
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
dbms_java.grant_permission('abcd', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');
dbms_java.grant_permission('
abcd', 'SYS:java.io.FilePermission','<<ALL FILES>>', 'execute');
again
get
can't exec: /tmp/sri/GROUP_ho.sh lacks user privilege
same error;

Process management at the OS level should prevent execution continuing in the calling code until the command has completed (either successfully or with error).
If the low level java code were to spawn child process threads then execution could continue, but I'm guessing the Java function your talking about doesn't do that and just calls the operating system to execute the command and waits for the returning code to come back.

Call ITS SAP R3 from CRM WebClient using parameter NOHEADEROKCODE=1

Similar Messages

Maybe you are looking for