Call Reuse ALV Twice - Is it possible?

Hi,
I have a requirement wherein I need to develop two alv display with header. The 2nd alv display will be issued once the user clicks a custom button from the 1st alv display. However, I the display in the 2nd alv is from the 1st alv display. I have checked the field catalog and internal table in the 2nd reuse alv grid. But I cant seem to figure what is wrong, do I need to use some function module to refresh the output? Any input is welcome.
Thanks & Regards,
Mawi

Hi,
Step 1>First create a PF-STATUS<for the custom button that you have to click>
Step 2>Call that PF-STATUS from your first REUSE_ALV_GRID_DISPLAY in the following way:-
 set the parameter like this way
 i_callback_pf_status_set = 'PF_STATUS_SET'
 Now create a subroutine for that
 FORM pf_status_set USING rt_extab TYPE slis_t_extab.
 SET PF-STATUS 'ZSTANDARD' OF PROGRAM 'ZSAR_ASSGN1_GRIDALV'.
 ENDFORM. "pf_status_set
Step 3>Set another parameter
 i_callback_user_command = 'USER_COMMAND'
 Now for that also create a subroutine like this:-
 FORM user_command USING I_r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
 <here you put all the subroutine necessary to create the second ALV>
 EndForm.
Hope in this way you get your solution.
Regards.
Sarbajit.

Similar Messages

ALV Report row grey-out (disable) dynamically -- REUSE ALV!!!

Hello All,
Well again a quick question...
Am using REUSE ALV method to display the ALV report.
Dynamically by selecting a row in the list (using the checkbox) and by pressing a button on application tool bar, the selected row should be greyed-out(disabled), that is it should not be anymore editable!
How is it possible?
Any kind of inputs regarding this will be damn damn helpful.
Thanks in advance!
Cheers, Sundar.

Hi,
The above solution 1 will be only applicable if using OO ALV!
above solution 2 will disable the entire column, and then again i need to call the "REUSE ALV"... which i don't want to.. as it opens another screen above the same screen and i have to close it twice!
I know it is possible to grey out the selected row using OO ALV... i want to know if it is possible in REUSE ALV???
Keep shooting please....
Thanks!
Regards,
Sundar

REUSE ALV -- To make a row grey out (disable/non-editable) dynamically!!!

Hello All,
Well again a quick question...
Am using REUSE ALV method to display the ALV report. There are few fields which i've made editable while building the field catalog!
Now by, Dynamically by selecting a row in the list (using the checkbox) and by pressing a button on application tool bar, the selected row should be greyed-out(disabled), that is it should not be anymore editable!
How is it possible?
Any kind of inputs regarding this will be damn damn helpful.
Thanks in advance!
Cheers, Sundar.

Hi,
The above solution 1 will be only applicable if using OO ALV!
above solution 2 will disable the entire column, and then again i need to call the "REUSE ALV"... which i don't want to.. as it opens another screen above the same screen and i have to close it twice!
I know it is possible to grey out the selected row using OO ALV... i want to know if it is possible in REUSE ALV???
Keep shooting please....
Thanks!
Regards,
Sundar

Reuse alv merge

what is the use of function module reuse alv field catalog merge

Field catalog with field descriptions
2.7.1. Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
all fields in this structure are to be output
the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
more info
DEFININING OUTPUT CHARACTERISTICS: PREPARING DISPLAY FIELDS CATALOG
A field catalog is prepared using the internal table (I_FIELDCAT) of type SLIS_T_FIELDCAT_ALV. Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields).
A field catalog is required for every ALV list output to add desired functionality (i.e. Key, Hotspot, Specific headings, Justify, Col. position etc) to certain fields of the output. If not mentioned specifically, then the defaults are taken. The possible values and defaults are listed below.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module.
The minimal field catalog is documented below. This can be done in a routine using a local variable. The user can use the other optional parameters to assign output attributes to different fields in the output, which differ from the default.
Check...
Re: What is the use of REUSE_ALV_FIELDCATALOG_MERGE?
Re: FM: REUSE_ALV_GRID_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
award points and try to close threads...
Message was edited by:
Ramesh Babu Chirumamilla

How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

You haven't given us much to go on here. What exactly are you doing and what exactly happens when you try? Which specific version of each program are you using? (Go to Help>About...)
On a side note, a simple, brief thread title is all that's needed. Something like "After Effects Issue" would be fine. You don't need the full question there.

Dynamical Call of ALV - No data update

Hi,
I tried to use use the ALV dynamically. With dynamically I mean that I that I have diffrent data structures, depending what was selected by the user. The first call of the program is always correct. The data is displayed correctly. But when the data structure is changing, the ALV display is not updated. For a better understanding I post a extract of my coding:
1. Creation of Container
CREATE OBJECT g_custom_container
 EXPORTING
 container_name = 'PARENT_CONT'
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 create_error = 3
 lifetime_error = 4
 lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
2.Creation of splitter container
CREATE OBJECT splitter
 EXPORTING
 parent = g_custom_container
 rows = 2
 columns = 2
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
container_2 = splitter->get_container(
 row = 1
 column = 2 ).
3.Dynamic Creation of alv object
CREATE OBJECT go_grid
 EXPORTING
 i_parent = container_2.
4. Get Fieldcatalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = lv_structure_name
 CHANGING
 ct_fieldcat = lt_fieldcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 ASSERT 1 = 2.
ENDIF.
5. Set table for first display
CALL METHOD go_grid->set_table_for_first_display
* EXPORTING
* i_structure_name = lv_structure_name
 CHANGING
 it_fieldcatalog = lt_fieldcat
 it_outtab = <lt_out_data>.
CALL METHOD ls_alv_ref-alv_ref->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
Perhaps someone could help.....
Best Regards, Edgar

Hello Edgar
The following sample report ZUS_SDN_TWO_ALV_GRIDS_8 shows how to solve your problem. Please note that for the sake of simplicity I replaced the tree containing the structure names with an ALV list. However, the switch between the different structures is triggered by the DOUBLE_CLICK event.
I like to add that the integration of the first displayed ALV list (DD02L) into GT_OUTTAB is not really elegant. In addition, with $TMP I marked a problematic part of the coding with respect to your requirement to have the right layout for each displayed ALV list:
If you have a fixed assignment of tabname -> 4-digit handle then it is ok. I my sample report the layouts only work if you select the tabnames in the very same order.
Before showing the entire coding I describe crucial parts of the coding:
[code]TYPES: BEGIN OF ty_s_outtab.
TYPES: tabname TYPE tabname.
TYPES: layout TYPE lvc_s_layo.
TYPES: variant TYPE disvariant.
TYPES: fcat TYPE lvc_t_fcat.
TYPES: data TYPE REF TO data.
TYPES: END OF ty_s_outtab.[/code]
Every time a new structure is selected the corresponding ALV data are stored as new record in GT_OUTTAB which is of line type TY_S_OUTTAB.
[code] READ TABLE gt_outtab INTO gs_outtab INDEX 2.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.[/code]
Since the ALV list data and the fieldcatalog are fully dynamic I use global field-symbols for these data.
[code]&----
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
SET TITLEBAR 'xxx'.
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT[/code]
The second ALV list which displays the table records is always newly displayed in the PBO module.
In the event handler method HANDLE_DOUBLE_CLICK we need to do two things:
- store the current fieldcatalog back to GT_OUTTAB
- store the name of the new selected table/structure -> trigger PAI
In routine HANDLE_DB_CLICK we create a new entry for GT_OUTTAB if it does not yet exist. Next we select this entry and display it again as second ALV list.
[code]
*& Report ZUS_SDN_TWO_ALV_GRIDS_8
*& Description: Display two ALV lists in splitter container (left/right)
*& Left ALV list contains DB table names,
*& right ALV list displays entries of selected DB table
*& SDN thread: Dynamical Call of ALV - No data update
*& Link: https:||Dynamical Call of ALV - No data update
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
PROCESS BEFORE OUTPUT.
 MODULE STATUS_0100.
PROCESS AFTER INPUT.
 MODULE USER_COMMAND_0100.
REPORT zus_sdn_two_alv_grids_8.
TYPE-POOLS: abap.
DATA:
gd_repid TYPE syst-repid,
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
gs_layout TYPE lvc_s_layo.
TYPES: BEGIN OF ty_s_outtab.
TYPES: tabname TYPE tabname.
TYPES: layout TYPE lvc_s_layo.
TYPES: variant TYPE disvariant.
TYPES: fcat TYPE lvc_t_fcat.
TYPES: data TYPE REF TO data.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
 WITH DEFAULT KEY.
DATA:
gt_dd02l TYPE STANDARD TABLE OF dd02l,
gs_outtab TYPE ty_s_outtab,
gt_outtab TYPE ty_t_outtab.
FIELD-SYMBOLS:
<gt_fcat> TYPE lvc_t_fcat,
<gt_outtab> TYPE table.
 CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-DATA:
 md_tabname_selected TYPE tabname READ-ONLY.
 CLASS-METHODS:
 handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING
 e_row
 e_column
 es_row_no
 sender.
ENDCLASS. "lcl_eventhandler DEFINITION
 CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
define local data
 DATA:
 ls_dd02l TYPE dd02l,
 ls_outtab TYPE ty_s_outtab.
 CHECK ( sender = go_grid1 ).
 READ TABLE gt_dd02l INTO ls_dd02l INDEX e_row-index.
 " Store data of currently displayed ALV list (except for DD02L)
 IF ( md_tabname_selected = space ).
 ELSE.
 READ TABLE gt_outtab INTO ls_outtab
 WITH KEY tabname = md_tabname_selected. " old
 CALL METHOD go_grid2->get_frontend_fieldcatalog
 IMPORTING
 et_fieldcatalog = ls_outtab-fcat.
 MODIFY gt_outtab FROM ls_outtab INDEX syst-tabix.
 ENDIF.
 md_tabname_selected = ls_dd02l-tabname. " new selected DB table
Triggers PAI of the dynpro with the specified ok-code
 cl_gui_cfw=>set_new_ok_code( 'HANDLE_DB_CLICK' ). " not 4.6c
 CALL METHOD cl_gui_cfw=>set_new_ok_code
 EXPORTING
 new_code = 'HANDLE_DB_CLICK'
 IMPORTING
 RC =
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
gd_repid = syst-repid.
SELECT * FROM dd02l INTO TABLE gt_dd02l
 WHERE tabname LIKE 'KN%1' OR
 tabname LIKE 'LF%1' OR
 tabname LIKE 'VB%' OR
 tabname LIKE 'MAR%' OR
 tabname LIKE 'E07%'
 AND tabclass = 'TRANSP'. " transparent table
SORT gt_dd02l BY tabname.
PERFORM init_controls.
PERFORM add_first_table.
Set event handler
SET HANDLER:
 lcl_eventhandler=>handle_double_click FOR go_grid1.
READ TABLE gt_outtab INTO gs_outtab INDEX 1.
Display data
CALL METHOD go_grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 CHANGING
 it_outtab = gt_dd02l
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_outtab INTO gs_outtab INDEX 2.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.
NOTE: method called in PBO module
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
 CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
 text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
SET TITLEBAR 'xxx'.
CALL METHOD go_grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = gs_outtab-tabname
 is_layout = gs_outtab-layout
 is_variant = gs_outtab-variant
 i_save = 'A'
 CHANGING
 it_outtab = <gt_outtab>
 it_fieldcatalog = <gt_fcat>
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
 WHEN 'BACK' OR
 'END' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
User has pushed button "Display Details"
 WHEN 'HANDLE_DB_CLICK'.
 PERFORM handle_db_click.
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form HANDLE_DB_CLICK
 text
--> p1 text
<-- p2 text
FORM handle_db_click.
define local data
DATA:
 ld_handle(4) TYPE n,
 ls_outtab TYPE ty_s_outtab.
READ TABLE gt_outtab INTO ls_outtab
 WITH KEY tabname = lcl_eventhandler=>md_tabname_selected.
IF ( syst-subrc NE 0 ).
 CLEAR: ls_outtab.
 ls_outtab-tabname = lcl_eventhandler=>md_tabname_selected.
 CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 I_BUFFER_ACTIVE =
 i_structure_name = ls_outtab-tabname
 I_CLIENT_NEVER_DISPLAY = 'X'
 I_BYPASSING_BUFFER =
 I_INTERNAL_TABNAME =
 CHANGING
 ct_fieldcat = ls_outtab-fcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CREATE DATA ls_outtab-data TYPE TABLE OF (ls_outtab-tabname).
 ASSIGN ls_outtab-data->* TO <gt_outtab>.
 SELECT * FROM (ls_outtab-tabname) UP TO 50 ROWS
 INTO TABLE <gt_outtab>.
 ls_outtab-layout-no_toolbar = abap_false.
 ls_outtab-layout-zebra = abap_true.
 ls_outtab-layout-smalltitle = abap_true.
 CONCATENATE ls_outtab-tabname ':'
 INTO ls_outtab-layout-grid_title.
 CONCATENATE ls_outtab-layout-grid_title 'Table Records'
 INTO ls_outtab-layout-grid_title
 SEPARATED BY space.
 ls_outtab-variant-report = gd_repid.
 DESCRIBE TABLE gt_outtab.
 ld_handle = syst-tfill + 1.
 WRITE ld_handle TO ls_outtab-variant-handle. " $TMP: Problem!!!
 APPEND ls_outtab TO gt_outtab.
ENDIF.
" NOTE: read into GLOBAL variable gs_outtab !!!!
READ TABLE gt_outtab INTO gs_outtab
 WITH KEY tabname = lcl_eventhandler=>md_tabname_selected.
ASSIGN gs_outtab-fcat TO <gt_fcat>.
ASSIGN gs_outtab-data->* TO <gt_outtab>.
ENDFORM. " HANDLE_DB_CLICK
*& Form INIT_CONTROLS
 text
--> p1 text
<-- p2 text
FORM init_controls .
Create docking container
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
 ratio = 90
 EXCEPTIONS
 OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking->set_extension
 EXPORTING
 extension = 99999 " full-size screen
 EXCEPTIONS
 cntl_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT go_splitter
 EXPORTING
 parent = go_docking
 rows = 1
 columns = 2
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = go_cell_left.
CALL METHOD go_splitter->get_container
 EXPORTING
 row = 1
 column = 2
 RECEIVING
 container = go_cell_right.
CALL METHOD go_splitter->set_column_mode
 EXPORTING
 mode = cl_gui_splitter_container=>mode_relative
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_splitter->set_column_width
 EXPORTING
 id = 1
 width = 25
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_splitter->set_column_sash
 EXPORTING
 id = 1
 type = cl_gui_splitter_container=>type_movable
 value = cl_gui_splitter_container=>false
 IMPORTING
 RESULT =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create ALV grids
CREATE OBJECT go_grid1
 EXPORTING
 i_parent = go_cell_left
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
 EXPORTING
 i_parent = go_cell_right
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form ADD_FIRST_TABLE
 text
--> p1 text
<-- p2 text
FORM add_first_table .
define local data
DATA:
 ls_outtab TYPE ty_s_outtab.
ls_outtab-tabname = 'DD02L'.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
 i_structure_name = ls_outtab-tabname
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
 ct_fieldcat = ls_outtab-fcat
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GET REFERENCE OF gt_dd02l INTO ls_outtab-data.
ls_outtab-layout-no_toolbar = abap_false.
ls_outtab-layout-zebra = abap_true.
ls_outtab-layout-smalltitle = abap_true.
CONCATENATE ls_outtab-tabname ':'
 INTO ls_outtab-layout-grid_title.
CONCATENATE ls_outtab-layout-grid_title 'Table Records'
 INTO ls_outtab-layout-grid_title
 SEPARATED BY space.
ls_outtab-variant-report = gd_repid.
ls_outtab-variant-handle = '0002'.
INSERT ls_outtab INTO gt_outtab INDEX 1.
ls_outtab-layout-no_toolbar = abap_true.
ls_outtab-layout-zebra = abap_true.
ls_outtab-layout-smalltitle = abap_true.
ls_outtab-layout-grid_title = 'DB Tables'.
ls_outtab-variant-report = gd_repid.
ls_outtab-variant-handle = '0001'.
DELETE ls_outtab-fcat WHERE ( fieldname NE 'TABNAME' ).
INSERT ls_outtab INTO gt_outtab INDEX 1.
ENDFORM. " ADD_FIRST_TABLE[/code]
Regards,
Uwe

Tooltip in reuse alv..

hi
in reuse alv grid is there any option for tooltip..
as in classes alv u have coltext for display and seltext for tooltip
can i do this in reuse alv grid....
if yes plz tell me how....

Hi Neha,
Please refer the link,
tooltip on alv reports
Regards,
Hema.
Reward points if it is useful.

Alv grid : is it possible to create 2 header lines ?

alv grid : is it possible to create 2 header lines ?
for example :
open year            close year
from 2006            until   2008
data
data
data
data
i know that i can do so in alv list , but is it possible in alv
grid ( with screen )   ?

No, this is not supported by the ALV Grid control.
Regards,
Rich Heilman

[svn:fx-3.x] 10063: Fix calling HTTPService responders twice.

Revision: 10063
Author:   [email protected]
Date:     2009-09-08 12:33:30 -0700 (Tue, 08 Sep 2009)
Log Message:
Fix calling HTTPService responders twice.
QE notes: None.
Doc notes: None.
Bugs: SDK-22883
Reviewer: Svetlin
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22883
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/rpc/http/HTTPService.as

Calling reuse library functions from UI Designer

Hello everybody,
to implement my requirements the custom reuse library function has to be called from UI with action parameters.
Unfortunately those parameters can be chosen either as constants or they ought to be BO-bounded.
On the following screenshot the standard SAP reuse library function is shown, but the behaviour is the same for the custom reuse libraries.
Since the parameters have to be flexible and since my UI component isn't BO-bounded I can't pass the required parameters.
I assume this reuse functions functionality is designed in order to not be connected to the BO instances. So I don't understand why the parameters of the reuse function can't be chosen e.g. from the Data Model of the UI component.
Does anybody know how to call reuse functions without being forced to bind to some BO?
Best Regads.
Leonid Granatstein

Hello Gerhard / Leonid,
The reuse library requires a data type for its parameters.
This is not ensured for arbitrary elements of the data model.
Plus the execution of the reuse library is done in the backend which does not know the data model.
Therefore this restriction.
Sorry,
Horst

Calling the webservice twice - Duplicate entries

Hi Experts,
Scenario : SOAP Client -> Call Microsoft webservice -> XI JDBC Sync call-> Call Microsoft webservice.
BPM Steps:
1. Receive Step -> Get the SOAP Client request (Open S/A Bridge)
2. Send Step -> Async call to Microsoft webservice to update the log status.
3. Send Step -> Sync call to JDBC
5. Send Step -> Close the S/A bridge
6. Send Step -> Call the Microsoft webservice to update the log status.
Receiver Determination Steps
1. SOAP Sender to BPM
2. BPM(Async request) to 2 Log Business Service. I have mentioned the both business service under Configured Receivers section in Receiver Determination.
3. BPM(Sync request) to JDBC
Issue : The JDBC part works fine. Only problem with the Microsoft webservice. Twice it update the log table. ie. Twice it calls the Microsoft's each webservice.
Please help me out, how to stop the second retry and let me know the above approach is correct or not.
Thanks & Regards
Sara

Hi Sara,
As per your info, Earlier you was trying to call both logging updates under one Sync/Async Bridge. But on Webservice side it will give you two responses and you will handling only one.
In later case also you are handling only 1st response of Webservice call, but the another call is still open.
Actually you are trying to built two Sync/Async Birdges. Which is not at all possible under one BPM.
SAP have not recommended for it.
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/43/65d4dab39b0398e10000000a1553f6/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
You need to create two seperate interfaces for this.
For e.g.
1st will call the Webservice before updating the JDBC tables.
2nd After updating the JDBC table you can again call the Webservice for updated logging status.
Thanks
Swarup
Edited by: Swarup Sawant on Jun 2, 2008 8:50 AM

ALV-Grid: Is it possible to catch "LOCAL Function Codes" in any Event ??

Hi,
is it possible that i can catch a "Local Function Code" in ALV Grid with an Event??
For example if you click to an Grid Button on the toolbar than it must call an Event!
..........BUTTON: Local APPEND (existing in ALV Toolbar)
Function Code: '&LOCAL&APPEND'
My Idea is:
--- IF i click to the Button "Local APPEND" in the ALV toolbar, than it must after this command give me an Message( "It was Successfull" ).
But the "Local Function Codes" dont called the Event "User_command" OR "After_user_command" is there any other Event for this "Local Function Codes"???
Have anyone an idea?
Thanks in forward.
Ersin

Hi,
See following thread.
http://scn.sap.com/thread/715996
Thanks
Santosh

Call Reuse ALV Twice - Is it possible?

Similar Messages

Maybe you are looking for