CALL TO COLUMN IN TITLE IN PIVOT TABLE

Hi all, In Oracle BI Asnwer i create a pivot table and i want to call a column data(column data in criteria), i think that i call with "@" and name column or position column, i think this because in gauge i can do it, i put "@1","@2","@3",.... "@+positioncolumn" image--> [Image gauge |http://lh4.ggpht.com/_V2lpPpulbm0/Sjt_sVzrxtI/AAAAAAAACSY/ys175AzRLJI/gaugestitle.PNG] , but in pivot table i can´t, image --> [Image pivot table|http://lh6.ggpht.com/_V2lpPpulbm0/Sjt_sR8NvAI/AAAAAAAACSc/si4JIoU2qNU/pivottable.PNG] .
I tried with : @1,@namecolumn,@{namecolumn},...etc.
any sugestions?
Edited by: Benito Camelas on 19-jun-2009 5:13
Edited by: Benito Camelas on 19-jun-2009 5:14

where exactly do you have a title in a pivot? you sure its not a title for the entire report?
if its the latter then you can add an narrative and apply what you tried ( e.g. @1)

Similar Messages

Maximum Number Of Columns For A OBIEE Pivot Table?

Hi All ,
What is the Maximum Number of Columns for a OBIEE Pivot Table? Also what is default size of columns set for Pivot view in OBIEE 11g?
Thanks In Advance.
Qujes

Hi,
You can increase the maximum columns in a view by add some tags to instanceconfig.xml file.
check this...http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
Regards,
Srikanth
Edited by: Srikanth Mandadi on Oct 15, 2010 10:04 AM

Column Order in a pivot table

Hi,
I have a question about the column order in a Pivot Table in a WebI (xi r3.1) report
At the moment I have the following Pivot Table
                   |1                                                 | 2
                   | Produced Water | Produced Oil | Produced Water | Produced Oil
Platform 1   | 2                         | 3                    | 4                         | 5
Platform 2   | 3                         | 4                    | 5                         | 6
I want to have the following pivot table instead
                    | Produced Water                         | Produced Oil
                    | 1                         | 2                    | 1                         | 2
Platform 1    | 2                         | 4                    | 3                         | 5
Platform 2    | 3                         | 5                    | 4                         | 6
Is it possible to setup the above pivot table in a WebI report?
Many Thanks for any help,
Dirk Jan

Dirk Jan,
That's a question regurlarly asked to me by users and the solution (as long as nobody is comming up with a better one) is to create variables for the measures for each month (using the WHERE operator).
So you need to define 12 variables (for each month) for Product Oil and Product Water (PO month1, PO month 2, ...., PW month 1, PW month 2 ....) using the formula (eg. PO month1):
=[Product Oil] Where ([month] = 1)
Then instead of a crosstab you build a table where you can put the variables in any order you want.
Regards,
Harry

Remove column heading in a pivot table without columns

I have a pivot table which only has rows and measures. But It doesn’t have any column.
It shows at the top a light grey cell (see attached image https://drive.google.com/file/d/0B1mQC-zTrijUSmtXWEFEaHB1cEU/edit?usp=sharing
How could I remove that?
Column properties – labels of column are already disabled.
OBIEE 11.1.1.7.0
Regards,
Víctor

Hey Victor,
I'm unable to view that file also...
Just curious, if you don't have anything in the column section of the pivot, why not just use a table?
If this is going onto a dashboard the quick and dirty approach is just to make a small CSS change, just throw something like the following into a text object.
    <style>
      .PTCHC0 {border:0px; background-color: #FFFFFF; background-image:none;}
    </style>
JB

Sorting Column's Label in Pivot Table

Hi Fellows !!
This is my problem: I have two tables, dates and rates, providing me data for a report. Dates has a DateId (number), Year(number) and Month(varchar2(12)), and Rates has DateId(number) and RateAmount(number). I wrote a quite simple query to obtain report's data:
SELECT DATES.YEAR, DATES.MONTH, RATES.RATEAMOUNT
FROM DATES, RATES
WHERE DATES.DATEID = RATES.DATEID.
I must to show as a pivot each rate by month for each year. Years must be showed as row heading and sorted descending (this already works) and Months must be showed as column's labels. Something like this:
----------|January|February|......|December|
2008 | 737.3 | 372.3 |......| 342.56 |
2007 | 346.2 | 456.6 |......| 678.78 |
The problem is Months always appear in Lexicographical order: April, August, December, ..., September. How can I to define the correct sort for Month ? Thanks in advance for your help.
Edited by: [email protected] on Sep 21, 2009 4:03 PM

Hi Vetsrini, thank you for your answer.
I've included an additional DATES table's field in query, and it contains the number of month, according to your suggestion. Results for query show month's names in proper form, but when I set up the pivot table from template builder and get preview for results (pdf, html, etc), I still get month's names in Lexicographical order. All the examples and documentation tips (sorting tags and others) I've found seems to apply to normal tables, because none of that works in my pivot table. Any other ideas are welcome.

Duplicate fact column as percentage in pivot table.

Hi,
I created duplicate fact column set as percentage in pivot table.
Duplicate column not visible for graph generation.My requirement is need to use percentage column for graph .
How to achieve this.kindly let me know.

Thanks for reply.
Sorry if im not clear.
Here is my requirement.
1.In my report contains 2 columns.
2.Example - year,count.(Here- Count is fact)
3.I make the count as duplicate column and set as percentage.
4.If i create graph in pivot table itself then graph contains 3 column information i.e.,Year,Count,% Count.
5 Here i unable to hide/remove original count column.
My requirement is my graph has to contains 2 column information i.e., Year,%Count.
How to achive this.kindly let me know.

How to calculate value from perticular column and row in pivot table

Hi all,
I am having following pivot table.
Country
A
B
C
D
F
G
H
J
K
L
M
Grand Total
Canada
1
1
3
3
12
14
13
97
China
8
4
3
19
India
2
47
448
176
395
3656
1964
1360
8077
USA
1545
352
380
26
10
4
8
32
2054
1023
758
4624
UK
12
19
13
23
33
298
Grand Total
1545
352
381
29
72
474
184
427
5743
3028
2167
13114
Now I want sum of Columns A, B, C, K, M where Country = India in one field.
and sum of D, F, g in another field. and sum of remainig columns in another field.
How can i get sum of values with some where condition in pivot table.
Thanks,

Hi Michael,
Following is the representation which i want
CouRntry
ROW LABLES
A
B
C
Total of
ABC
F
G
Total
Of FG
J
K
L
TOTAL
of JL
Grand
Total
Canada
1
1
3
3
12
14
13
97
China
8
4
3
19
India
2
47
448
176
395
3656
1964
1360
8077
USA
1545
352
380
26
10
4
8
32
2054
1023
758
4624
UK
12
19
13
23
33
298
Grand Total
1545
352
381
29
72
474
184
427
5743
3028
2167
1
Also if i get sum how can i add a column in between of the fields.
Thanks

How to convert row data into columns without using pivot table?

Hello guys
I have a report that has several columns about sales call type and call counts
It looks like this:
Calls Type Call Counts
Missed 200
Handled 3000000
Rejected 40000
Dropped 50000
Now I wanna create a report that look like this:
Missed call counts Handled Call counts Rejected Counts Drop counts Other Columns
200 300000000 40000 50000 Data
So that I can perform other calculations on the difference and comparison of handled calls counts vs other call counts..
I know pivot table view can make the report look like in such way, but they cant do further calculations on that..
So I need to create new solid columns that capture call counts based on call types..
How would I be able to do that on Answers? I don't have access to the RPD, so is it possible to do it sololy on answers? Or should I just ask ETL support on this?
Any pointers will be deeply appreciated!
Thank you

Thanks MMA
I followed your guidance and I was able to create a few new columns of call missed count, call handled counts and call abandoned counts.. Then I create new columns of ave missed counts, ave handled counts and so forth..
Then I went to the pivot view, I realized there is a small problem.. Basically the report still includes the column "call types" which has 3 different types of call "miss, abandon and handled". When I exclude this column in my report, the rest of the measures will return wrong values. When I include this column in the report, it shows duplicate values by 3 rows. It looks like this:
Queue name Call types Call handled Call missed Call abondoned
A Miss 8 10 15
A Handled 8 10 15
A Abandoned 8 10 15
in pivot table view, if I move call type to column area, the resulted measures will become 8X3, 10X3 and 15X3
So is there a way to eliminate duplicate rows or let the system know not to mulitply by 3?
Or is this as far as presentation service can go in terms of this? Or should I advice to provide better data from the back end?
Please let me know, thanks

Pivot table with variables columns

I need a helo to pivot table with variable columns,
I have a pivot table :
SELECT a.*
FROM (SELECT codigo_aluno,nome_aluno , id_curso,dia FROM c_frequencia where dia like '201308%') PIVOT (sum(null) FOR dia IN ('20130805' ,'20130812','20130819','20130826')) a
but I need to run the select with values for dia , getting from a other table :
SELECT a.*
FROM (SELECT codigo_aluno,nome_aluno , id_curso,dia FROM c_frequencia where dia like '201308%') PIVOT (sum(null) FOR dia IN (
select dia from v_dia_mes )) a
thank you

The correct answer should be "Use the Pivoted Report Region Plugin".
But, as far as I know, nobody has created/posted that type of APEX plugin.
You may have to use a Basic Report (not an IR) so that you can use "Function returning SELECT" for your Source.
You would need two functions:
One that dynamically generates the Column Names
One that dynamically generates the SELECT statement
These should be in a PL/SQL Package so that the later can call the former to ensure that the column data matches the column names.
i.e. -- no 'SELECT *'
MK

How to Sort Dimension in Pivot Table via Order Column which is changing like Factual values

Hi,
Recently in of our product offerings we got stuck on this following question:
How to Sort Dimension based on the Order Value which Keeps Changing with Factual Values??
We have a data source laid out as (example)
In the above the “Order” columns are changing per
Company/(DimensionA) for DimesnsionB.
Instead what we want is: (But only if we can get the following result without putting the “Order” Column in the “Values” Section.
If there are any configurations that we can make to our power pivot model for the similar data set so that the
DimesnionB in this case can be sorted by the Order column, would be greatly helpful to us.
Sample File:
http://tms.managility.com.au/query_example.xlsx
Thanks
Amol

Hi Amol,
According to your description, you need to sort dimension members in Pivot Table via order column, and you don't want the order column show on the Pivot table, right?
Based on my research, we can sort the data on the Pivot table based on one of the columns in that table, and we cannot sort the data based on the columns that not existed on the Pivot table. So in your scenario, to achieve your requirement, you can
add the column to pivot table and hide it.
https://support.office.com/en-gb/article/Sort-data-in-a-PivotTable-or-a-PivotChart-report-49efc50a-c8d9-4d34-a254-632794ff1e6e
Regards,
Charlie Liao
TechNet Community Support

Pivot tables with column selector - navigation?

Hi
Just hoping someone can help. We maintain a large number of dashboards and would like to move to streamlining them by combining reports using column selectors. However when we have pivot table reports where the column selector on the rows are selectable on up to 5 different fields, but the pivot columns are split by one specific field, the navigation reports won't filter on the column headings. It will filter on the rows which can change between the various column selector options.
For example we have:
5 columns (5 types of application)
The rows are either: advisor, status of app, month received, age of app, world region etc...
The fact is # of apps
This navigates to a list report which should prompt off the various fields in the column selector and the pivot table column headings (all are prompted) but it just ignores the type of application field and only prompts off the rows.
Is it possible to have it prompting off both like a normal pivot table does?
Sorry if that's not clear.
Regards
Edited by: Nefertare on 15-Jun-2011 05:47

user12104265 wrote:
''||Entity."Ent"||''No need of " before & after Report2
FYI: goto col properties -> data format -> override -> select 'HTML' from LOV
Regards,
*Raghu*

How to hide/suppress empty columns in pivot tables

In a pivot table, is there any way to do something like "suppress missing data" to make an entire column hidden only if it is empty? I have a situation where I can't hide an entire measure because the measure has values for another dimension, but I would like to hide the column that is empty. See the example below. I would like to hide the combination of Dim1 and Measure 2, and the combination of Dim 2 and Measure 3. I can't hide all columns with Dim1 and/or Dim2, or Measure2 and/or Measure3. Is there any way to hide just the column with the empty combination? Thanks.
Dim1 Measure1 Always populated
Dim2 Measure1 Always populated
Dim1 Measure2 Always null
Dim2 Measure2 Always populated
Dim1 Measure3 Always populated
Dim2 Measure3 Always null

Bhawna -
That made a difference, but it still needs some work. The IfNull() function picked up every value in the columns that I wanted to hide and changed them to zero. The conditional formatting that you suggested hid the content in those columns from the HTML. However, there ended up being several issues:
1) IfNull() picked up other null values that happened to be in the resultset, so the conditional formatting was applied to more than intended. I could correct that by changing the data value in the physical database columns for the entire pivot table columns that I want hidden, but then I have to work around having bogus values in those intersections. Still, that is a possible workaround.
2) The column headers for the columns that I want to disappear did not go away. When I applied CSS display:none, it shifts the pivot table cells to the left, so a lot of the data ends up under the wrong column headings.
3) CSS display:none only hides the content from screen readers. When I view the pivot table on the dashboard and print it to a PDF, the data in the columns that I want to disappear are back.
That still seems like it's a long ways from "suppress missing data" for the entire column. Thanks for your suggestion.
Daniel

Customizing the Cell Content of a Pivot Table

Hi,
I have been away from ADF for a few years (since 10g v 1.3.1) and am quite impressed with all the Faces functionality added to the 11g release. The application I wrote relied heavily on pivot tables which back then, I had to use stored procedures in the database and dynamically views to display information. I am very interested in moving this application to 11g and taking advantage of the PivotTable component. One thing the application does is change the style of cells based upon the object being presented. I have been reading:
Oracle® Fusion Middleware
Web User Interface Developer's Guide for Oracle Application
Development Framework
11g Release 1 (11.1.1)
B31973-03
And am very interested in section 26.8 Customizing the Cell Content of a Pivot Table.
I easily created a pivot table and would like to change the formatting of various cells. I created a backing bean for a test page and added the Example 26–4 Sample Code to Change Style and Text Style in a Pivot Table to the bean.
public CellFormat getDataFormat(DataCellContext cxt)
CellFormat cellFormat = new CellFormat(null, null, null);
QDR qdr = cxt.getQDR();
//Obtain a reference to the product category column.
Object productCateg = qdr.getDimMember("ProductCategory");
//Obtain a reference to the product column.
Object product = qdr.getDimMember("ProductId");
if (productCateg != null && productCateg.toString().equals("Sales Total"))
cellFormat.setTextStyle("font-weight:bold")
cellFormat.setStyle("background-color:#C0C0C0");
else if (product != null && product.toString().equals("Sales Total")
cellFormat.setTextStyle("font-weight:bold");
cellFormat.setStyle("background-color:#C0C0C0");
return cellFormat;
Almost verbatim except changed the literals to select data in my use case domain. My question is: How do I invoke this message from my pivot table? I need to pass it a instance of the DataCellContext. The example is great and illustrates what I am looking to do but does not go into the implementation details required. Is there a sample app available for download that demonstrates these capabilities?
Thanks,
Jeff
Edited by: jcapzz on Jun 9, 2011 3:56 PM

Hello,
I haven't fully understood your question.
Is it: How do I call the getDataFormat() method from my pivot table?
If so , you need to set the dataFormat attribute of your pivot table.
ex: <dvt:pivotTable id="pt2" var="cellData" varStatus="cellStatus"
value="#{bindings.YourView.pivotTableModel}"
headerFormat="#{viewScope.yourBean.getHeaderFormat}"
*dataFormat="#{viewScope.yourBean.getDataFormat}"*
contentDelivery="immediate" pivotEnabled="false"
columnFetchSize="-1" rowFetchSize="-1"
/>
I also put the *headerFormat* attribute which allows to customize the headers
I hope I understood your question ;)
Jack

Wrong value with calculated item in pivot table

I have a report with 4 columns:
First Column are Department Dimension
Second Column is Actual value
Third Column is Previous value
Four Column is: ((Actual Value-Previous Value)/Previous Value))*100 that called Var
Then I do a pivot table and I have new calculated item: Department1/Department2 and I have wrong value in four column:
Department----------------------------------Actual-------Previous------Var
Dept1------------------------------------------18503--------16308--------13,5
Dept2-------------------------------------------3758---------3518----------6,8
(Calculated Item: Dept1/Dept2)--------4,92---------4,64------------*2* <---- This value is wrong...and it has to be: 6,03
Is possible to get the correct value???
Thank you very much!

hi,
Create a logical column with ur calculation formula and make it as default agg rule in rpd and answers change it to server determined/server complex agg.I did the same it was working fine for me!!
Check this link
http://books.google.com/books?id=OnbYrkWa4RsC&pg=PA74&lpg=PA74&dq=%22server+complex+aggregate%22&source=web&ots=qxrpaFXmo2&sig=CxLOemzcOlvIiaQ_sQD4fPQotdM&hl=en&sa=X&oi=book_result&resnum=5&ct=result#v=onepage&q=%22server%20complex%20aggregate%22&f=false
thanks,
saichand

Pivot table logic....

Hi All -
I need to create a pivot table on the following data :
Country : List of country names in one column
Cases : Case #'s of the cases which were raised for individual countries
Open Date: Date when the case was raised
Closed Date: Date when a particular case is closed
Query : we need to show the open and closed cases for a particular country on the basis of month...
Row of the pivot should be Country... In the column we need to have the month name and under it we need to have the count of open cases and count of closed cases...
could you please help me out in this?
The following is the view of the pivot table for example:
_____________________ January__________________________February_____________
Country Name______open Cases__Closed Cases_________open Cases____ closed Cases
Thanks!
Edited by: user8021111 on Dec 8, 2011 5:05 PM

user8021111 wrote:
Hi All -
I need to create a pivot table on the following data :
Country : List of country names in one column
Cases : Case #'s of the cases which were raised for individual countries
Open Date: Date when the case was raised
Closed Date: Date when a particular case is closed
Query : we need to show the open and closed cases for a particular country on the basis of month...
Row of the pivot should be Country... In the column we need to have the month name and under it we need to have the count of open cases and count of closed cases...
could you please help me out in this?
The following is the view of the pivot table for example:
_____________________ January__________________________February_____________
Country Name______open Cases__Closed Cases_________open Cases____ closed Cases
Thanks!
Edited by: user8021111 on Dec 8, 2011 5:05 PMDo this:
Assumption: You have a processing date column, I'lll call "Full Date" that is the date column you will use to track the "counts" of open and closed cases. The assumption is that in your database, this date column contains the "end of month" processing date for each month (e.g., 10/31/2011, 11/30/2011, 12/31/2011, etc.)
1) In the Rows section of your pivot table, put the Country column.
2) In Criteria mode, click on the fx button of the "Full Date" column and enter this
MONTH("Full Date")
This will give you the "month." Put this column in the Columns section of your pivot table.
3) In Criteria mode, click on the fx button of the Open Date column and enter COUNT(Open_Date_column). Put this column in the Measures section of your pivot table.
4) Do the same as step 3) for the Closed Date column.
So by putting the MONTH("Full Date") column in your Columns section of the pivot table, OBIEE will break out the Open Date and Closed Date counts by each month. That's how you do it.

CALL TO COLUMN IN TITLE IN PIVOT TABLE

Similar Messages

Maybe you are looking for