Call Transaction from Program by Skipping Initial Screen & Pass the Value

Hi All,
Can anybody help me to call a transaction from my program. I do not want to display the initial screen of the transaction but that TCODE should get opened by passing the values to the parameter of the initial screen.
For Example, in my program I want to call 'SE38' and in that, my Program of Name 'ZTEST' should get opened. So I need to call Transaction SE38, but I donot want to display initial screen of that. Instead of that, I want to put the value of Program 'ZTEST' and thus my program should get opened.
Sandip

Hello Sandip,
Since you have not made any references to Batch Processing, I shall tell you the normal way to do it. First look at the code below and execute it.
set parameter id 'DTB' field 'VBAK'.
call transaction 'SE16' and skip first screen.
There are a few things that you need to keep in mind before you use this statement:
1. All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters.
2. For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number. However, if the next screen can be reached from the first screen by just hitting the Enter key, this will work.
The following will not work as you expect, because the next screen in the transaction cannot be reached by just hitting the Enter Key.
set parameter id 'RID' field 'ZTEST'.
call transaction 'SE38' and skip first screen.
Regards,
Anand Mandalika.
Please reward points if this helps.

Similar Messages

Call an executable program inside function module and pass the table values

Hi,
       i'm pretty new to HR Abap programming. I have a requirement like "calling an executable program within a function module and the output of the program data(Stored in internal tables) should be passed to the function module tables".
I've some idea about SUBMIT keyword and i used it in the function module..
Please do the needful to solve this.
Regards,
Selvi.

Hi,
Thanks for all your reply.
I've used Option 3 as per dsouzajovito suggestion. Now i'm getting data in function module tables using import/ export table to memory concept.
Again a small issue arises, while i'm executing function module it fetches all pernr available in the server and displays the details of last pernr. GET pernr statement is used in the Z report and submit statement is used like this as follows.
SUBMIT ZHR_RFC_PAYSLIP   WITH PERNR-PERNR EQ EMPCODE
                                      WITH PYBEGDA EQ FDATE
                                      WITH PYENDDA EQ LDATE
                                      AND RETURN.
Pls suggest if there is any corrections in the code.
If i give a pernr as input in the function module, then it should fetch the details related only to that pernr.
FYI, No selection screen is used here as per requirement.
Regards,
Selvi.

Can i pass the values by declaring the continer in sub seq and calling in main seq

hi,
In sub seq, i have created the contianer (under parameter) and the continer has array of numbers and array of strings.....
My question is
Similar to parameter can i call these container in main seq and can pass the values through these arrays?
How to find no of elements of array of string or number which is delcared under contianer?
Pls let me know
thanks,
chethan

I made a small mistake in the previous example, the subsequence calls itself instead of calling it from the mainsequence, please use the attached example.
Attachments:
Sequence File 1.seq ‏5 KB

Skip Initial Screen is not permitted for transaction SWF_OBJ_EXEC_CL

Hi Experts,
When clicking on the trip to edit the item from UWL, I am getting the error Skip Initial Screen is not permitted for transaction SWF_OBJ_EXEC_CL. Basically it is trying to open the tcode in Web GUI. I have the authorization for this tcode too.
Pleas suggest where could be the issue.
Thanks,
Murthy

can you chekc this note 1055324
If you want the sysetm to open something other than the default
method of the attached object in the UWL then you can use SWFVISU in
the backend.
By default (With no entries in SWFVISU) when you click on the attached
object from the UWL it will open WEBGUI and sue transaction
SWF_OBJ_EXEC_CL to execute the default method of the business object.
If you maintain a entry in SWFVISU it will check this first and
open whatever you have referenced in SWFVISU and not open WEBGUI and
execute SWF_OBJ_EXEC_CL.
In SWFVISU maintain an entry under the section "Object Visualisation"
enter the object method and link it to a visualisation type e.g.
BSP, WEBDynpro, iView, etc.

How skip initial screen of sp01?

Dear Experts ,
I am working on BDC call transaction .here i am using sp01 transaction code .here i am passing data from my selection screen to first screen of sp01 using BDCDATA ,and displaying all print jobs.Now what my requirement is ,skipping initial screen of SP01.how to do that.if i use 'AND SKIP FIRST SCREEN',i can't use 'USING' addition .what is the procedure to skip the sp01 initial screen.
Thanks
Naresh

Hi,
Thats very simple man...
Use below code for that purpose...
type-POOLs : slis.
data : goto_sel.
data : lw_sel TYPE SLIS_SELFIELD.
data: lt_sysid type TABLE OF ALSYSID,
ws_sysid type ALSYSID,
lt_rqiden type TABLE OF RQIDEN_T,
ws_rqiden type RQIDEN_T,
lt_RQOWNE type table of RQOWNE_T,
ws_RQOWNE type RQOWNE_T.
ws_sysid-SYSID = sy-sysid.
append ws_sysid to lt_sysid.
ws_rqiden-SIGN = 'I'.
ws_rqiden-OPTION = 'EQ'.
ws_rqiden-LOW = Pass spool number.
ws_rqiden-HIGH = ' '.
append ws_rqiden to lt_rqiden.
For Username
ws_RQOWNE-sign = 'I'.
ws_RQOWNE-OPTION - 'EQ'.
ws_RQOWNE-LOW = PASS USER NAME
*ws_RQOWNE-HIGH =
APPEND ws_RQOWNE to lt_RQOWNE.
CALL FUNCTION 'RSPO_RINIT_SPOOL_SP01'
EXPORTING
SAVEFLAG = 'A'
SUMMARY = 'X'
LOCAL = 'X'
OWNER = ' '
CLIENT = ' '
RQNONE = 'X'
RQPROC = 'X'
RQSUCC = 'X'
RQERR = 'X'
PJPROC = 'X'
PJSUCC = 'X'
PJPROB = 'X'
PJERR = 'X'
TABLES
SYSLIST = lt_sysid
S_RQIDEN = lt_RQIDEN -
>TABLE containing SPOOL number.
S_RQOWNE = lt_RQOWNE -->TABLE CONTAINING USERNAME
call function 'RSPO_RDISPLAY_SPOOLREQ'
exporting
use = ' '
importing
goto_sel = goto_sel
TABLES
SPORQ = lt_SPORQ
OUTRQ =
changing
rs_selfield = lw_sel
exceptions
others = 1.
if sy-subrc 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
IMPORTANT - All table are select option so declare them into your selection screen and directly pass them function module "RSPO_RINIT_SPOOL_SP01".
Hpoe you got my point.
Thanks,
Vijay

Want to call transactions from ALV list output

Hi Guru's,
I have a report which displays Open PR's, open PO's n their details with respect to material. wat i want to do is call transactions from this out put i.e i want a interactive output. if i click on particular PR i want the system to call that PR screen. how can i do this?? Plz help.

REFER THIS
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = 'USER_COMMAND '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    =
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
TABLES
    T_OUTTAB                       =
IF SY-SUBRC <> 0.
ENDIF.
AND THEN
                 rs_lineinfo type slis_lineinfo.
FORM user_command5 USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
data : lv_date type char4.
CLEAR : LV_DATE .
CASE r_ucomm.
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'BELNR'.
    read table it_e into wa_e index rs_selfield-tabindex.
    if sy-subrc = 0.
    lv_date = wa_e-budat(4).
    endif.
    SET PARAMETER ID 'BLN' FIELD rs_selfield-value.
    SET PARAMETER ID 'BUK' FIELD s_bukrs-low.
    SET PARAMETER ID 'GJR' FIELD lv_date.
    call TRANsaction 'FB03' AND SKIP FIRST SCREEN.
    endif.
    ENDCASE.
ENDFORM. "user_comm

Calling Transaction from other system using RFC

Hi ,
I have one button on screen(say Screen-A), in ECC. when its pressed the transaction '/SAPAPO/BOPIN' gets called from APO.
For calling transaction from APO I am using FM - 'ABAP4_CALL_TRANSACTION'.
I want the initial screen of that transaction to retain some values which I fill on the Screen-A(the screen which has that button).
When I call the transaction from ECC itself (ex. C006), the initial screen of C006 retains the value on Screen-A.
I want the same to happen in case of calling transaction from APO.
How to achieve this? Would it need the changes in IMG (SPRO)?
Please note that, Screen-A is initial screen of transaction 'md05' and I want to retain vaules of Material, MRP Area, Plant.
Thanks,
Sujeet

Builld a RFC enabled FM () that wrap the call of Smartforms (*) in the other system.
Regards,
Raymond
(*) [Writing Remote Function Modules in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/22/0425f2488911d189490000e829fbbd/content.htm]
(**) [Integrating the Smart Form into the Application|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm]

Sapscript calling forms from program

Hi experts
I need to write a form in a program to get values.
Here is my code. But i cant seem to succesfully compile it. Need help. I want to take
ernam from sapscript and send name and lastname back. Can u please fill the function.
Also i have an error says itcyy is not a structure ?
thanks.
REPORT ZME23N_SAPSCR_FM.
tables : user_Addr.
form get_Values TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
*READ TABLE IN_PAR WITH KEY 'ERNAM'.
*data firstname like user_addr-name_first.
*select single * from user_Addr
*where bname = ernam.
*firstname = user_Addr-name_first.
*lastname = user_addr-name_last.
endform.

You can use the PERFORM command to call an ABAP subroutine
(form) from
any program, subject to the normal ABAP runtime
authorization
checking. You can use such calls to subroutines for
carrying out
calculations, for obtaining data from the database that is
needed at
display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed
when a
document is formatted for display or printing.
Communication between a
subroutine that you call and the document is by way of
symbols whose
values are set in the subroutine.
The system does not execute the PERFORM command within
SAPscript
replace modules, such as TEXT_SYMBOL_REPLACE or
TEXT_INCLUDE_REPLACE.
The replace modules can only replace symbol values or
resolve include
texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of
the four
SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must
therefore be
character strings.
The ABAP subroutine called via the command line stated
above must be
defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING...
are now
stored in the internal table IN_TAB . Note that the system
passes the
values as character string to the subroutine, since the
field Feld
VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR
80). See the
example below on how to access the variables.
The internal table OUT_TAB contains names and values of the
CHANGING
parameters in the PERFORM statement. These parameters are
local text
symbols, that is, character fields. See the example below
on how to
return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in
the ABAP
program QCJPERFO is called. Then the simple barcode
contained there
('First page', 'Next page', 'Last page') is printed as
local variable
symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY 'PAGE'.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'NEXTPAGE'.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY 'BARCODE'.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = '|'. "First page
ELSE.
OUT_PAR-VALUE = '||'. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = 'L'. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.

ESS throwing error while calling transaction from R/3

Whenever u try to pull certain I-view like under ESS > Income tax provisional statement then the portal throws below mentioned error. Portal is not able to call transactions from R/3.
Error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://dev.mglep.com:26000/sap(ZT0yZElaRG5xNDlZdFF4aGcyTDhzMWxRLS1hVUR5bDBMbjBDZ2hWUUcyMlZmcmlBLS0=)/bc/gui/sap/its/webgui?
The following error was encountered:
Connection to 69.43.161.156 Failed
The system returned:
(111) Connection refusedThe remote host or network may be down. Please try the request again.
Your cache administrator is root.
Please help

Hi,
Please check the parameters that has been defined in SICF for the transaction you are using.
With Regards,
Kaustuv Goswami.

Passing the values from one pgm to another pgm (Calling pgm has no sel scr)

Hi gurus,
In my requirement i need to pass the values from one program to another program.
I am using SUBMIT statement . But , the program which i am calling has no selection screen.
So how can i pass the values?
Please help me ASAP.
Regards,
Bhanu.R

Export your internal tables or work areas to a memory id in ur program before u use submit.
Then in second pgm you have to import from memory id given above.
example.
EXPORT gs_header FROM gs_header to memory id 'HEADER'.
EXPORT gt_item FROM gt_item to memory id 'ITEM'.
SUBMIT YFIIN_DISHC_MAILREPORT EXPORTING LIST TO MEMORY AND RETURN.
In your second pgm you can write
import gs_header TO gs_header from MEMORY id 'HEADER'.
import gt_item TO gt_item from MEMORY id 'ITEM'.

Initial screen for the Queries component

Hi all,
which transaction show the initial screen for the Queries component ??
Thanks,

Hi Deepu,
I saw in the SAP document in directory:
Queries->Selecting Queries for Processing,
a graphic shows the initial screen for the Queries component. but wasn't mentioned how we can get this graphic.
The directory title is:
"Query from user group:initial screen"
Do you know which transaction it is ?
Thanks,

How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?

How do I remove my caller id from my samsung convoy phone so that the person I call does not see my name?

MojaveMoon's solution will work if there is only one person you want to block your ID from; if you want to block your caller ID from everyone, you can go to your account online, go to Change Features, and scroll down till you see Caller ID block. Instructions say that once this is activated, you can dial *82 before any # you WANT to display your number to, but all others will be blocked.
If you are on a Family share plan, the account owner needs to log in and choose your line to activate this feature.

Job scheduling(passing the values to the child program)

when i'm trying to schedule a background job(using job_open job_submit and job_close) i'm passing the values of the selection screen(parent program) to my child program using set parameter id. And trying to get the values using get parameter id in the cild program.
But the values of the parent program are not being passed to the child program what may be the cause for it?

rathan,
Why con't you use
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
When you start an executable program, the standard selection screen normally appears, containing the selection criteria and parameters of both the logical database connected to the program and of the program itself (see Direct Execution - Reports). When you start an executable program using SUBMIT, there are various additions that you can use to fill the input fields on the selection screen:
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
These options have the following effects:
VIA SELECTION-SCREEN
The selection screen of the called executable program (report) appears. If you transfer values to the program using one or more of the other options, the corresponding input fields in the selections screen are filled. The user can change these values. By default, the system does not display a selection screen after SUBMIT.
USING SELECTION-SET <var>
This option tells the system to start the called program with the variant <var>.
WITH <sel> <criterion>
Use this option to fill individual elements <sel> of the selection screen (selection tables and parameters). Use one of the elements <criterion>:
<op> <f> [SIGN <s>], for single value selection
If <sel> is a selection criterion, use <op> to fill the OPTION field, <f> to fill the LOW field, and <s> to fill the SIGN field of the selection table <sel> in the called program.
If <sel> is a parameter, you can use any operator for <op>. The parameter <sel> is always filled with <f>.
[NOT] BETWEEN <f1> AND <f2> [SIGN <s>], for interval selection
<f1> is transferred into the LOW field, <f2> into the HIGH field, and <s> into the SIGN field of the selection table <sel> in the called program. If you omit the NOT option, the system places the value BT into the OPTION field; if you use NOT, the system fills OPTION with NB.
IN <seltab>, transferring a selection table
This addition fills the selection table <sel> in the called program with the values of the table <seltab> in the calling program. Table <seltab> must have the structure of a selection table. Use the RANGES statement to create selection tables.
WITH FREE SELECTION <freesel>, user dialog for dynamic selections
To use this option, the called program must be connected to a logical database that supports dynamic selections. In the calling program, use the function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. They allow the user to enter dynamic selections on a selection screen. One export parameter of these function modules has structure RSDS_TEXPR from the RSDS type group. Transfer the values of this export parameter by means of the internal table <freesel> of the same structure to the called report.
WITH SELECTION-TABLE <rspar>, dynamic transfer of values
You need an internal table <rspar> with the Dictionary structure RSPARAMS. The table then consists of the following six fields:
SELNAME (type C, length 8) for the name of the selection criterion or parameter
KIND (type C, length 1) for the selection type (S for selection criterion, P for parameter)
SIGN, OPTION, LOW, HIGH as in a normal selection table, except that LOW and HIGH both have type C and length 45.
This table can be filled dynamically in the calling program with all of the required values for the selection screen of the called program. If the name of a selection criterion appears more than once, the system creates a multiple-line selection table for that criterion in the called program. If the name of a parameter appears more than once, the system uses the last value. Note that LOW and HIGH have type C, so that the system executes type conversions to the criteria of the called program. This is important for date fields, for example. Before your program is used in a live context, you should check it using the VIA SELECTION-SCREEN addition.
Except for WITH SELECTION-TABLE, you can use any of the above options several times and in any combination within a SUBMIT statement. In particular, you can use the WITH <sel> option several times for one single criterion <sel>. In the called program, the system appends the corresponding lines to the selection tables used. For parameters, it uses the last value specified. The only combination possible for the WITH SELECTION-TABLE option is USING SELECTION-SET.
If the input fields on the selection screen are linked to SPA/GPA parameters, you can also use this technique to pass values to the selection screen (see Passing Data Between Programs).
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.
Pls. reward if useful...

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

I am trying to pass the value of a field from the seeded page /oracle/apps/

I am trying to pass the value of a field from the seeded page /oracle/apps/asn/opportunity/webui/OpptyDetPG. The value I want is in the VO oracle.apps.asn.opportunity.server.OpportunityDetailsVO and the field PartyName.
I have created a button on the page whose destination URL is
OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName={#PartyName}
It opens the correct page, but in the URL it shows this
http://aa.com:8005/OA_HTML/OA.jsp?OAFunc=XX_CS_SR_QUERY&CustName=&_ti=1897289736&oapc=177&oas=x5E2TIfP1Y0FykBt1ek4ug..
You can see that &CustName is not getting the proper value. Do I need to do something different?

You cannot call the form with OA.jsp . This is applicable only for OAF based pages registered as a function.
For calling a Form, use the below example:
You have to change the application responsibility key and form function name .
"form:PN:PN:STANDARD:XXPNTLEASE:QUERY_LEASE_ID={@QueryLeaseNumber}"
Regards,
Sudhakar Mani
http://www.oraclearea51.com

Call Transaction from Program by Skipping Initial Screen & Pass the Value

Similar Messages

Maybe you are looking for