Call transaction in Netweaver Business Client from WD ABAP

Hi all,
I have a third party web application that feeds me with a sales order number through a link. Is it possible to get this sales order displayed in a Web Dynpro Application that has been embedded in NWBC?
A solution where the transaction VA03 opens directly in NWBC, can also be used, if that's easier.
Kind regards
Jonas

Hi Thomas,
Thanks for the quick reply, though i'm still not quite sure what to do, so i will give a thorough description of my problem, just to make sure we are on the same page.
I know that when i use a standalone WD app in a browser outside the portal or NWBC, i can call it with parameters from a different web application by appending the parameter name and value, at the end of the URL. This causing the app to refresh with the data corresponding to the incoming parameter. But how can i make it do the same when the WD app is embedded in a portal or NWBC.
The scenario is that multiple users are looking at sales orders in a web application developed in php. This application is creating a link to the WD app for each sales order, with the sales order number and user ID as parameters. So when the user clicks the link, the WD app in NWBC "refreshes" with the data. But of course only in the specific user's NWBC session, so that other users can use the same WD app to view different sales orders at the same time.
Am i wasting my time trying to figure this out, or is it actually possible
Regards
Jonas

Similar Messages

CALLING BUSINESS OBJECT FROM AN ABAP REPORT

Hi friends,
           I have a business object to which a Custom Function Module is assigned in one of its method.This Function Module calls a Bapi to update a Service Order.I need to capture the status of Idocs regarding success or failure from the function Module in the ABAP Report.I would like to know if there is any way to call this business object from my report and get the status of IDOC.
Regards,
Dev Reddy

sorry I think i was not clear in explaining .I am calling a BAPI to update 'Priority' field of service orders in a custom function module(remote enabled) and I have assigned this bapi to a custom business object. Also I have developed an ALE interface thru BDBG transaction which automatically generates custom basic idoc type,messsage type ,Ale i/b and o/b function modules.
Actually my requirement deals with a report where we have list of service orders in an internal table and pass each service order to update Priority field.
Is there any way to create an IDOC from the report and update the priority field and pass back the status of IDOC.
I have tried calling ALE O/B function function module generated thru BDBG transaction in my report but as a result i am unable to get any of the message whether idoc is created or not.
Here is my report code.
data: it_methods type table of BAPI_ALM_ORDER_METHOD with header line,
      it_header type table of BAPI_ALM_ORDER_HEADERS_I with header line,
      it_header_up type table of BAPI_ALM_ORDER_HEADERS_UP with header line,
      RECEIVERS TYPE TABLE OF BDI_LOGSYS WITH HEADER LINE.
T_METHODS-REFNUMBER = '000001'.
IT_METHODS-OBJECTTYPE = 'HEADER'.
IT_METHODS-METHOD = 'CHANGE'.
IT_METHODS-OBJECTKEY = '000004000768'.
APPEND IT_METHODS.
CLEAR IT_METHODS.
IT_METHODS-REFNUMBER = '000000'.
IT_METHODS-METHOD = 'SAVE'.
APPEND IT_METHODS.
IT_HEADER-ORDERID = '000004000768'.
IT_HEADER-PRIORITY = '2'.
APPEND IT_HEADER.
IT_HEADER_UP-ORDERID = '000004000768'.
IT_HEADER_UP-PRIORITY = 'X'.
APPEND IT_HEADER_UP.
CALL FUNCTION 'ZZ_FM_SM_ORD_PRIOR_UPDATE'
EXPORTING
   OBJ_TYPE                      = 'ZBOSMPRUPD'
   SERIAL_ID                     = '0'
TABLES
    ITMETHODS                     = IT_METHODS
    ITHEADER                      = IT_HEADER
    ITHEADERUP                    = IT_HEADER_UP
    RECEIVERS                     = RECEIVERS
COMMUNICATION_DOCUMENTS       =
APPLICATION_OBJECTS           =
EXCEPTIONS
   ERROR_CREATING_IDOCS          = 1
   OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Dev Reddy

WSConfig problem when connecting to Portal with Netweaver Business client

Hello everybody,
I am trying to connect to an existing portal (7.0) with the new Netwevaer Business client. On one system, it works - on the other, it doesn't.
The client tries to call the url:
http://<host>:<j2ee-port>/NavigationWS/NavigationWSConfig?wsdl=binding&style=document
on one system (where it works), the response contains a wsdl xml:
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" name="NavigationWSWsd" targetNamespace="urn:NavigationWSWsd" xmlns:bns0="urn:NavigationWSWsd/NavigationWSConfig/document" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:import location="http://iwdfvm2160.wdf.sap.corp:51000/NavigationWS/NavigationWSConfig/bindings?wsdl&style=document" namespace="urn:NavigationWSWsd/NavigationWSConfig/document" />
- <wsdl:service name="NavigationWS">
- <wsdl:port name="NavigationWSConfigPort_Document" binding="bns0:NavigationWSConfigBinding">
<soap:address location="http://iwdfvm2160.wdf.sap.corp:51000/NavigationWS/NavigationWSConfig?style=document" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
on the other system (actually the one I need to work!) the server returns error 404 the ressource does not exist.
Now I think it may be a webservice configuration problem, but I have little experience in this area.
What is this URL to ../NavigationWS/NavigationWSConfig ? How can I activate it or check if it exists ? Where to look on the system ?
Can anyone help?
best regards,
Johannes
Message was edited by:
        Johannes Bacher
Message was edited by:
        Johannes Bacher

Hi Johannes,
We are facing the same question with our 7.0 Portal (SPS 13). It seems that the application "NavigationWS" does not exist, there is not even an application alias defined at the HTTP provider of the J2EE engine.
What Portal version are you using? Is there a difference to the Portal that has no problems with providing the wsdl?
Kind regards,
Florian Dworak
Message was edited by:
        Florian Dworak

Requirement: Open Transaction code in SAP GUI from WD ABAP application

Hello All,
I have a WD ABAP application which is accessed from SAP GUI and Portal. In SAP GUI, there is report which calls the application URL.
In the WD application, I need to call a transaction code. At this juncture, I made use of the ITS url. But,, the SSO does not work in SAP GUI.It works only in portal.
As a solution,we identified the entry point i.e. SAP GUI or portal. Then, based on entry from SAP GUI, we tried to call the transaction code using call transaction statement. But, that replaced the wd application. We instead wanted it as a popup or atleast another session.
Now, how do we open a transaction from WD screen in another session?
Also, can we setany configurations in the system to make sure the SSO works for all the transactions i.e. ITS used in SAP GUI.?
Thank you.
Regards,
Sharath

Hi,
This question gets asked many times.
Depending on the circumstances, this can be achieved with varying degree of success
So here is some code that might help you.
This can (does) load a Windows GUI.
Some things to consider.
1. Browser settings can get in the way a bit, asking the user if they want to open a ".sap" file
2. The user may have a SAP session open so consider adding a "/o" to the system code.
3. The Custom variable might want to contain a [Options] section for "Re-use"
4. The SAPLogon_ID may be required if using SSO (SNC)
I have modified the code below, but you will get the idea.
JS
* Create the shortcut contents
call function 'SWN_CREATE_SHORTCUT'
    exporting
      i_system_command        = lv_com
      i_saplogon_id           = lv_logon_id
      i_sysid                 = sy-sysid
      i_client                = sy-mandt
      i_user                  = sy-uname
      i_custom                = lv_custom
    importing
      shortcut_string         = lv_string
    exceptions
      inconsistent_parameters = 1
      others                  = 2.
* Convert to xstring to execute....
call method cl_http_utility=>if_http_utility~encode_utf8
    exporting
      unencoded = lv_string
    receiving
      encoded   = lv_xstring
    exceptions
      others    = 1.
* Now call to open the shortcut.
lv_file_name = 'mytrans.sap'.
lv_mime = 'application/x-sapshortcut'.
call method cl_wd_runtime_services=>attach_file_to_response
    exporting
      i_filename      = lv_file_name
      i_content       = lv_xstring
      i_mime_type     = lv_mime
      i_in_new_window = abap_true.

Calling Enity Bean's business methods from a session bean in EJB 3.0 specif

Hello everybody,
Happy to be a member with you in this forum.
This is my first participation in this forum.
I have some problem to start with EJB 3.0 specification, I have created an entity bean with some business methods that access a mysql datbase, then i want to create a stateful session bean to provide the client an interface to consume business methods in Enity be
Please can someone you help me with an example

@Vladimir Pavlov
I did not understand what you are trying to convey...
Whenever an attribute of this bean is modified we want to access that latest value.... Is there any way to know, when the attribute is modified? Just with get/set we can not know, when it is modified... am i right?
We want to achieve this without modifying the existing source code of the EJB....
@ Ivo Simeonov
As of my knowledge, to use interceptors we need to modify the EJB source code, but we do not want to touch the source code....
All this has to be achieved dynamically when the application is deployed in the production.... is it possible???

SAP NetWeaver 7.3 SPS 05 and NetWeaver Business Client NWBC 3.5 Error

Hi Experts,
I was using SAP Portal 7.3 and NWBC 3.5 and they were working OK.... After applying SPS 05 I got this error after login into my NWBC 3.5 Patch 3 (last release)...
No Content Available
Contact your administrator
And there is no content at all. Next to my search Quick Launch there is a message that says empty node
After checking the log trace of NWBC there is no content in my bode. The log goes:
================================================================
HHHHHH                     Exception                      HHHHHH
================================================================
WebException: Error en el servidor remoto: (500) Error interno del servidor.
   en System.Net.HttpWebRequest.GetResponse()
   en com.sap.nw.nwbc.csruntime.implementation.navigation.core.CsNavigationVirtualRoot.DoGZIPRequest(String url, String postData, String& responseData, Boolean addSapClientAndNwbcContext)
11:44:09.997 [main] E         Body of error response is EMPTY
11:44:11.975 [main] E         DoXmlGzipRequest failed
In my Portal I got Roles assigned. This error occured after applying SPS05 into SAP EP 7.3.
Regards
David Cortes

Hi David,
I am leaning towards SSL. We are not using SSL in our environment and I believe that by default in a NW7.3P5 portal the WSConfig (?) services require SSL. When doing a security trace from within the portal via NWA I am receiving:
"POST /ConfigurationWS/ConfigurationWSConfig?wsdl&style=document&mode=standard HTTP/1.1
content-type: text/xml; charset=utf-8
accept-encoding: gzip, deflate
user-agent: NWBCClient v1.0"
"process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: SSL required for this call. For details see log entry .
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1204)"
Unfortunately I don't have a NW7.3 system pre SP5 to see if it was a support pack change or the default in a NW7.3 system.
Looking at the service definition for ConfigurationWSSI in the Configuration and Security Tabs you can see the transport protocol is defined as HTTPS.   If I can change the ConfigurationWSSI and the NavigationWSVi (?) to HTTP protocol it gets past the SSL check but then I receive other exceptions. Unfortunately I don't have the time to investigate further.
Regards
Craig

Is netweaver business client necessary to record web dynpro app script?

thanks and best regards,
Anders

Hi Anders
NWBC is not necessary to record the Webdynpro application.
Just select the webdynpro command from pattern functions in eCATT editor and record the application.
To do this you need to know the URL of the screen you need to automate and the configuration id.
You can get the config id and the URL if you know the package name of the application. Once you have the package just go to SE80 and enter the package and traverse to the web dynpro application node and you can get the desired details there and also you can launch the application from there.
you have to setup the RFC containing the http or https connection with the right port no.
Once you have those select the command WEBDYNPRO from pattern and enter the URL and the config id there.
There are few limitations in eCATT tool right now to record a WEBDYNPRO screens such as recording of the pop ups which comes in between which has URL (Object based navigation) and the pdf forms etc. Tool development is working continuously to solve those issues and will be fixed soon!
Best Regards
Rahul

How to initiate a Lync call on mobile client from desktop?

Hi All,
I've go Lync 2013 enterprise voice setup and working lovely. Also have Lync mobile clients working great too.
I want to get rid of my desk phone, well, because it'd be cool and save the company money of course.
I want to be able to initiate calls on my Lync mobile client from my Lync desktop client. Is that possible?
Cheers
James

You can't really, as the mobile client can't be paired with better together. There are some instances where you kind of can, such as when starting a conference call you can have it call out to your mobile number, but this isn't really initiating a call.
You can still get rid of your desk phone, I'd just suggest using your desktop client to make the call with a headset. I will occasionally just use my iPhone headset, there are cheap 2.5mm headset to PC adapters out there. And of course you can
initiate the call with your mobile, but the experience isn't as smooth is all.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
Huff. Sad times. Oh well. Surely someone at Microsoft has thought of this scenario too?
I didn't ever find that GSM gateway unfortunately. We migrated from Avaya IP Office so could have used that but decided to go full Lync and accept the additional cost of the mobile calls.

SAP GUI - SAP Business client - Portal Comaprison

Hi ,
We would like to know what are the advantages and disadvantages of NW Business client over portal and normal SAP GUI in all the aspects such as development,performance .
what is the general/rule of thumb difference between development for SAP BC and Portal ?
How easy can developments be transferred from Portal to SAP GUI and vice versa ?
Are there any language specific implications for these objects ?
Are there any differences for development objects that are developed for SAP GUI and SAP BC ?
Are there any security related implications when using code that is created for SAP GUI on SAP BC and vice versa ?
Are there any additional security flags that need to be checked when switching from one to the other ?
While I cannot have more than 1 active SAP BC session (using the local installed version) can I run more than 1 with the web based SAP BC?
Thanks
Kumar.

Check this link
http://www.sapfrontend.com/wp-content/uploads/2007/09/sap-netweaver-enterprise-portal-and-netweaver-business-client.pdf
http://help.sap.com/bp_ekit604/documentation/NWBC30_EN.PDF
Thanks,
Sravanthi

Unable to Capture ALV output in an Internal Table, after CALL TRANSACTION

Dear all,
My requirement is to run multiple materials in T-code CK86_99 but as we know CK86_99 is only adequate to one material at a time.
So, I want to capture the Output of the T-code in my Internal table with respect to all the Material Numbers I use in the Select-Options of my Z Program.
Below is the Code I developed so far, but the Class
cl_salv_bs_runtime_info=>get_data_ref(
        IMPORTING r_data = lf_ref ).
is not capturing the Ouput...
Please have a look and enlighten me how it could be solved.
TABLES : mara.
DATA : BEGIN OF wa_mara,
matnr TYPE mara-matnr,
END OF wa_mara.
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      it_mara LIKE TABLE OF wa_mara.
*      BELNR(10).
FIELD-SYMBOLS:<fs_tab> TYPE ANY TABLE,
<fs_line> TYPE any.
DATA:lf_ref TYPE REF TO data,
     lf_ref1 TYPE REF TO data.
SELECT-OPTIONS so_matnr FOR mara-matnr.
PARAMETERS p_werks LIKE t001w-werks.
*BELNR = 'Z92'. " Give Document Number here
SELECT matnr FROM mara INTO TABLE it_mara WHERE matnr IN so_matnr.
DATA opt TYPE ctu_params.
LOOP AT it_mara INTO wa_mara.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMKKB0'.
wa_it_bdcdata-dynpro   = '0300'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-MATNR'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-MATNR'.
wa_it_bdcdata-fval = wa_mara-matnr.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-WERKS'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-WERKS'.
wa_it_bdcdata-fval = p_werks.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = 'OSNY'."'ONLI'."=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPLKKRSOO'.
* wa_it_bdcdata-dynpro   = '0100'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'BACK'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPMKKB0'.
* wa_it_bdcdata-dynpro   = '0300'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'EXIT'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'N'.
cl_salv_bs_runtime_info=>set(
    EXPORTING display = abap_false
              metadata = abap_true
data     = abap_true ).
CALL TRANSACTION 'CK86_99' USING it_bdcdata OPTIONS FROM opt.
TRY.
cl_salv_bs_runtime_info=>get_data_ref(
        IMPORTING r_data = lf_ref ).
      ASSIGN lf_ref->* TO <fs_tab>.
    CATCH cx_salv_bs_sc_runtime_info.
      MESSAGE 'Unable to retrieve ALV data' TYPE 'E'.
ENDTRY.
cl_salv_bs_runtime_info=>clear_all( ).
IF <fs_tab> IS ASSIGNED.
    CREATE DATA lf_ref1 LIKE LINE OF <fs_tab>.
    ASSIGN lf_ref1->* TO <fs_line>.
ENDIF.
*LOOP AT <FS_TAB> ASSIGNING <FS_LINE>.
*ENDLOOP.

Hi Abhay,
      If you go to Transaction code SE93, enter the tcode "CK86_99" and click display, you may see the default value for transaction is "KKBB" and the screen field for P_SCREEN = 0300, P_TCODE = ck86_99.
      You may need to copy the transaction code "KKBB" and go to SE93 again, enter the tcode for "KKBB" then click display, now you may see the program name is "RKKB1000".
      Hope this answer your question.
Thanks
Hock Lin

BDC Call Transaction - Doc.No not getting generated in Message Internal tab

Dear All,
I am using BDC Call Transaction method for uploading data for transaction, Iam able to successfully capture the Error messages, sucess messages and the transaction number is also displayed for the bdc run in Mode A, but in case of scheduling the job in background, the Error messages are displayed but the transaction number is not captured in the message Internal table( BDCMSGCOLL).
Kindly look into the matter and revert back for any further info.
Regards
Naresh

Hi,
Please try using the following kind of code in 'CALL TRANSACTION'
    opt-dismode = 'E'.     " Exclusive mode
    opt-defsize = 'X'.
    opt-updmode = 'S'.
    opt-nobinpt = ' '.
    CALL TRANSACTION transaction_code USING ft OPTIONS FROM opt
                                                                         MESSAGES INTO t_bdcmsgcoll .
Hope this will work.
Thanks,
Leo

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .

Hi all,
i hope there is someone that can help me.
My problem is: in an ABAP custom report in a FORM user-command my code is
CASE ls_selfield-sel_tab_field.
    WHEN 'ITAB-BELNR'.
      IF NOT ls_selfield-value IS INITIAL.
        SET PARAMETER ID 'RBN' FIELD ls_selfield-value.
        CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .
ENDCASE.
When i click on output field of my report, not skip first screen but only call MIR6!!!
How can i solve this problem?
Regards.

Hi,
First of all Please don't use all Caps for Subject Line
Test Following Sample Code it will solve out your problem,
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      belnr(10).
belnr = '100'. " Give Document Number here
DATA opt TYPE ctu_params.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMM08N'.
wa_it_bdcdata-dynpro   = '100'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'SO_BELNR-LOW'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'SO_BELNR-LOW'.
wa_it_bdcdata-fval = BELNR.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = '=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'E'.
CALL TRANSACTION 'MIR6' USING it_bdcdata OPTIONS FROM opt.
Please Reply if any Issue,
Best Regards,
Faisal

Skip first screen when calling transaction via BDC

I need to use BDC to call transaction FD32 and suppress the first screen. Do I need to set BDC_OKCODE? However, when I set BDC_OKCODE to '/00', this error occured, "System error: Error in routine DYNPRO_ERSTES_BILD".
Here is my code:
CLEAR ls_bdcdata.
ls_bdcdata-program = 'SAPMF02C'.
ls_bdcdata-dynpro = '0100'.
ls_bdcdata-dynbegin = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KUNNR'.
ls_bdcdata-fval = gs_data-kunnr.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KKBER'.
ls_bdcdata-fval = p_kkber.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0105'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_OKCODE'.
ls_bdcdata-fval = '/00'.
APPEND ls_bdcdata TO lt_bdcdata.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'FD32' USING lt_bdcdata OPTIONS FROM opt.
Any suggestions?

Hi,
Try this..This is working fine for me..
CLEAR ls_bdcdata.
ls_bdcdata-program = 'SAPMF02C'.
ls_bdcdata-dynpro = '0100'.
ls_bdcdata-dynbegin = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_CURSOR'.
ls_bdcdata-fval = 'RF02L-D0110'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_OKCODE'.
ls_bdcdata-fval = '/00'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KUNNR'.
ls_bdcdata-fval = gs_data-kunnr.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KKBER'.
ls_bdcdata-fval = p_kkber.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0105'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0110'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0120'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CALL TRANSACTION 'FD32' USING lt_bdcdata MODE 'E'.
Thanks,
Naren

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

Call transaction in Netweaver Business Client from WD ABAP

Similar Messages

Maybe you are looking for