Call transaction method for MM42

Hi Guis,
I am using MM42 tcode to Maintain the article Sales Orgnisation wise . For this I am using Call transaction method.
Program is working fine in Display mode when I excute it in No display mode for some Sales Org I am getting message that
'SOME OF THE GROUP DATA HAS BEEN BLOCKED BY ABAPER(My id) ' .
I tried using diffrent recording ways but the problem is not solving .
Will you please any body solve my problem .
Thanks,
Santhosh.V

HI,
Check in SM12 and see fi there are any locks with ur id.close all the internal sessions and refresh the lock list..
Now try again and see. Hope your id is not shared
Regards,
Nagaraj

Similar Messages

No batch input data for screen occured in Call Transaction method for PA40

Hi,
I creatred an interface to update an employee action data ( Change of position ) PA40 by using Call transaction method.
while executing the interface, I got the below error.
No batch input data for screen MP049100 200
this interface updated the first employee from file, then after it is giving the below error frequently.
No batch input data for screen MP049100 200
regards,
Ashok Reddy Revoori

The infogroup of action Change Position may be having infotype 0491. The infotypes screen sequence is decided based on employee's country grouping and user group. For the employee where you are receiving error, infotype 0491 screen is appearing for which you do not have BDC data.

How to handle the pop-ups in va02 transaction in Call Transaction Method

Hi Experts ,
I am trying to do bdc by call transaction method for va02 transaction but i am getting popups .
How can i handle the popups and for different sales orders i am getting different popups.
is there any way to handle the pop ups dynamically.
Thanks ain advance.

hi,
when you are using BDC then you will have to handle all the popups. this is minus point in using bdc as you need to feed each and every single bit of information so that bdc works fine and if anything misses then your bdc program will get stuck in middle of processing.
best thing is check for function module or BAPIs available for those transactions. For VA02 there is a BAPI available ''BAPI_SALESORDER_CHANGE''. Try using this BAPI and if this BAPI doesnt handle the change you want to make in sales order then only go for BDC.
you can also check BAPIs available in 'BAPI' tcode.
hope this is helpful.
Regards,
Saba

Screen no change in BDC call transaction method

Hi experts
Greetings!
I have a BDC created in call transaction method for t-code FB01.
Data passed successfully to the first screen but when it navigates to the second screen I am not able to pass any data.
After debugging I found that the issue was because of the DYNPRO value.
It was 8500 when I created this recording but now the screen number shows 350.
Is is possible that screen nos change because of any support stack or OSS notes implementation.
In run time i tried to change the value to 350 and it works fine..
Thanks
Jay

Hi,
LSMW Direct input method is better for your quiry. Becasuse i wrote BDC for FB01 but not working properly.
So i used LSMW, helped me a lot. Progmra name is RFBIBL00. Or else i will export and send you if you want. It can handle multiple line items upto 950.
Thanks,
Sriram

Reg Vendor master upload using BDC Call Transaction Method

Hi All,
Thanks in advance.
I am uploading vendor master data using bdc call transaction method for XK01. In that i am getting an error message that the fields " smtp_addr" ( for email) and "time_zone" (for time zone) doesnot exist on the screen '0110' ( this is the second screen) . the field timezone will be displayed on the screen only when we go for communications button and select the URL field .
Do anybody have the solution for this problem. if possible can you give me the code for that screen.

Create a recording via SM35 (menu go to=>recording), this will generate automatically the code for filling your bdcdata-table...

Track error records in Call Transaction method

Hi
I have used call transaction method for uploading legacy data.
I need to track the error record.
Please help me to find out the solution.
Thanks in advance
Reagards
shriraam

HI,
!. Obtain the messaged into an Interal table of type BDCMSGCOLL using Call Transaction syntax..
               Call Transactio <Tcode>
                       using <BDC Table>
                      mode <A/N/P>
                      update <A/S>
                     messages INTO <mSGTAB>
2. Read the Msg table for eroors and success messages
3. Then format the messge with the help of Function Module :'Format_messages'.
4. Display the respective messges with the help of write statements or with the help of ALV.
Rgds
Umakanth

Hi all, BDC call transaction METHOD, trapping ERRORS

hi
i have developed BDC (recording via call transaction method) for VB01.
could u please tell me how to display records having errors after running recording or to give index of records having errors.
and is it possible to give transaction code for recording since my bdc is executable program.
plase answer both the questions.
thanx

Here is the flow that Raja is explaining to you.
DATA: v_index LIKE sy-tabix.
LOOP AT itab.
v_index = sy-tabix.
*-- prepare the BDC data
CALL TRANSACTION 'VB01' USING bdcdata
                           MODE 'N'
                          MESSAGES INTO bdcmsgcoll.
READ TABLE bdcmsgcoll WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
*-- Error occured for the record with index <b>v_index</b>
ELSE.
*-- unless there is a success message with this number,
*   it is not succesfull because 'No data for screen xxx'
*   will not show up as an error message type, but will be
* a success message type
    READ TABLE bdcmsgcoll WITH KEY msgnr = '312'.
    IF sy-subrc = 0.
*-- success
    ELSE.
*-- error with index <b>v_index</b>
    ENDIF.
ENDIF.
ENDLOOP.
As you can see, now you have the index of the record where the error occured. Now this will become complicated if you are combining several records into one transaction call. In that case you need to find how you can know all the records that you just accumulated.
As an example, let us say you have an internal table with external number, customer, material, quantity and at every new external number, you want to create a sales order. Until you get a new external number, you will not do the call transaction because until then it will be items of the same sales order. So in this case, after the call transaction, you will have get all the records that belong to making this sales order by using the external number and then prepare your messages.
I hope this is clear.
Srinivas
Message was edited by: Srinivas Adavi

Program for call transaction method

can any body help me , how to write a call transaction method . how to create error logs for call transaction method

hi
REPORT ZCALL.
TYPES : BEGIN OF itab,
lifnr TYPE rf02k-lifnr,
ktokk TYPE rf02k-ktokk,
END OF itab.
DATA : i_tab TYPE TABLE OF itab INITIAL SIZE 0,
wa_tab TYPE itab.
DATA : i_bdc TYPE TABLE OF bdcdata INITIAL SIZE 0,
wa_bdc TYPE bdcdata.
DATA : i_message LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
wa_message TYPE bdcmsgcoll.
DATA : fname TYPE string VALUE 'd:\manish.txt'.
DATA: p_text(100) TYPE c.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = fname
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_tab INTO wa_tab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'RF02K-LIFNR' wa_tab-lifnr.
PERFORM bdc_field USING 'RF02K-KTOKK' wa_tab-ktokk.
PERFORM bdc_field USING 'BDC_OKCODE' '= AUSW'.
CALL TRANSACTION 'XK01' USING i_bdc MODE 'N'. " UPDATE 'S' MESSAGES
"INTO i_message.
REFRESH i_bdc.
ENDLOOP.
IF sy-subrc NE 0.
READ TABLE i_message WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
LOOP AT i_message INTO wa_message.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = i_message-msgid
lang = 'EN'
no = i_message-msgnr
v1 = i_message-msgv1
v2 = i_message-msgv2
v3 = i_message-msgv3
v4 = i_message-msgv4
IMPORTING
msg = p_text
EXCEPTIONS
not_found = 1
OTHERS = 2.
WRITE:/ p_text.
ENDLOOP.
ENDIF.
ENDIF.
*& Form bdc_dynpro
text
-->PROGRAM text
-->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR wa_bdc.
wa_bdc-program = program.
wa_bdc-dynpro = dynpro.
wa_bdc-dynbegin = 'X'.
APPEND wa_bdc TO i_bdc.
ENDFORM. "bdc_dynpro
*& Form bdc_field
text
-->FNAM text
-->FVAL text
reward if u find useful
regards
Nagesh.Paruchuri

Where can i find the theory for session and call transaction method

hi
where can i find the theory for session and call transaction method
bye

check this link
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.planetsap.com/bdc_main_page.htm
lsmw, bapi, bdc- session, bdc-calltransaction
u can get it in help.sap.com also

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

What are the parameters in Call transaction method?

Hi ABAPER'S,
Please give me what are the parameters in call transaction method?
Thanks,
Prakash

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.
Syntax:
CALL TRANSACTION <tcode>
USING <bdc_tab>
MODE <mode>
UPDATE <update>
<tcode> : Transaction code
<bdc_tab> : Internal table of structure BDCDATA.
<mode> : Display mode:
A
Display all
E
Display errors only
N
No display
<update> : Update mode:
S
Synchronous
A
Asynchronous
L
Local update
A program that uses CALL TRANSACTION USING to process legacy data should execute the following steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION 'TFCA' USING BDCDATA
MODE 'A'
UPDATE 'S'.
MESSAGES INTO MESSTAB.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
The MODE Parameter
You can use the MODE parameter to specify whether data transfer processing should be displayed as it happens. You can choose between three modes:
A Display all. All screens and the data that goes in them appear when you run your program.
N No display. All screens are processed invisibly, regardless of whether there are errors or not. Control returns to your program as soon as transaction processing is finished.
E Display errors only. The transaction goes into display mode as soon as an error in one of the screens is detected. You can then correct the error.
The display modes are the same as those that are available for processing batch input sessions.
The UPDATE Parameter
You use the UPDATE parameter to specify how updates produced by a transaction should be processed. You can select between these modes:
A Asynchronous updating. In this mode, the called transaction does not wait for any updates it produces to be completed. It simply passes the updates to the SAP update service. Asynchronous processing therefore usually results in faster execution of your data transfer program.
Asynchronous processing is NOT recommended for processing any larger amount of data. This is because the called transaction receives no completion message from the update module in asynchronous updating. The calling data transfer program, in turn, cannot determine whether a called transaction ended with a successful update of the database or not.
If you use asynchronous updating, then you will need to use the update management facility (Transaction SM12) to check whether updates have been terminated abnormally during session processing. Error analysis and recovery is less convenient than with synchronous updating.
S Synchronous updating. In this mode, the called transaction waits for any updates that it produces to be completed. Execution is slower than with asynchronous updating because called transactions wait for updating to be completed. However, the called transaction is able to return any update error message that occurs to your program. It is much easier for you to analyze and recover from errors.
L Local updating. If you update data locally, the update of the database will not be processed in a separate process, but in the process of the calling program. (See the ABAP keyword documentation on SET UPDATE TASK LOCAL for more information.)
The MESSAGES Parameter
The MESSAGES specification indicates that all system messages issued during a CALL TRANSACTION USING are written into the internal table <MESSTAB> . The internal table must have the structure BDCMSGCOLL .
You can record the messages issued by Transaction TFCA in table MESSTAB with the following coding:
(This example uses a flight connection that does not exist to trigger an error in the transaction.)
DATA: BEGIN OF BDCDATA OCCURS 100.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDCDATA.
DATA: BEGIN OF MESSTAB OCCURS 10.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSTAB.
BDCDATA-PROGRAM = 'SAPMTFCA'.
BDCDATA-DYNPRO = '0100'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CARRID'.
BDCDATA-FVAL = 'XX'.
APPEND BDCDATA.
BDCDATA-FNAM = 'SFLIGHT-CONNID'.
BDCDATA-FVAL = '0400'.
APPEND BDCDATA.
CALL TRANSACTION 'TFCA' USING BDCDATA MODE 'N'
MESSAGES INTO MESSTAB.
LOOP AT MESSTAB.
WRITE: / MESSTAB-TCODE,
MESSTAB-DYNAME,
MESSTAB-DYNUMB,
MESSTAB-MSGTYP,
MESSTAB-MSGSPRA,
MESSTAB-MSGID,
MESSTAB-MSGNR.
ENDLOOP.
The following figures show the return codes from CALL TRANSACTION USING and the system fields that contain message information from the called transaction. As the return code chart shows, return codes above 1000 are reserved for data transfer. If you use the MESSAGES INTO <table> option, then you do not need to query the system fields shown below; their contents are automatically written into the message table. You can loop over the message table to write out any messages that were entered into it.
Return codes:
Value
Explanation
0
Successful
<=1000
Error in dialog program
> 1000
Batch input error
System fields:
Name:
Explanation:
SY-MSGID
Message-ID
SY-MSGTY
Message type (E,I,W,S,A,X)
SY-MSGNO
Message number
SY-MSGV1
Message variable 1
SY-MSGV2
Message variable 2
SY-MSGV3
Message variable 3
SY-MSGV4
Message variable 4
Error Analysis and Restart Capability
Unlike batch input methods using sessions, CALL TRANSACTION USING processing does not provide any special handling for incorrect transactions. There is no restart capability for transactions that contain errors or produce update failures.
You can handle incorrect transactions by using update mode S (synchronous updating) and checking the return code from CALL TRANSACTION USING. If the return code is anything other than 0, then you should do the following:
write out or save the message table
use the BDCDATA table that you generated for the CALL TRANSACTION USING to generate a batch input session for the faulty transaction. You can then analyze the faulty transaction and correct the error using the tools provided in the batch input management facility.

Error in BDC CALL TRANSACTION METHOD..

hai i got an error in doing BDC CALL TRANSACTION METHOD
Error:diffrent number of parameters in FORM and PERFORM(routine :FILL_SCREEN_DETAILS:,number of formal parameters :3,number of actual parameters:1)
PROGRAM
REPORT ZDEMO_UPLOAD_COST_CENTER_DATA.
DATA:BEGIN OF WA_DATA,
KOKRS TYPE KOKRS,"CONTROLLING AREA
KOSTL TYPE KOSTL,"COST CENTER
DATAB TYPE DATAB,"START DATE
DATBI TYPE DATBI,"END DATE
KTEXT TYPE KTEXT,"NAME
LTEXT TYPE LTEXT,"DESCRIPTION
VERAK TYPE VERAK,"PERSON RESPONSIBLE
KOSAR TYPE KOSAR, "COST CENTER CATEGORY
KHINR TYPE KHINR,"HIERARCHY AREA
BUKRS TYPE BUKRS,"COMPANY CODE
GSBER TYPE GSBER,"BUISINESS AREA
END OF WA_DATA.
*TYPES:IT_DATA TYPE STANDARD TABLE OF TY_DATA.
DATA:IT_DATA LIKE TABLE OF WA_DATA,
      IT_BDCDATA LIKE TABLE OF BDCDATA,
      WA_BDCDATA LIKE LINE OF IT_BDCDATA,
      IT_BDCMSGCOLL LIKE TABLE OF BDCMSGCOLL,
      WA_BDCMSGCOLL LIKE LINE OF IT_BDCMSGCOLL.
DATA :V_FILE TYPE STRING.
CONSTANTS :C_KS01(4) TYPE C VALUE 'KS01',
            C_X(1) TYPE C VALUE 'X',
            C_A(1) TYPE C VALUE 'A'.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETER :PA_FILE LIKE FC03TAB-PL00_FILE OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK B1.
*AT SELECTION SCREEN ON VALUE REQUEST
* EVENT TO BE TRIGGERED WHEN WE PRESS F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_FILE.
PERFORM GET_F4_FOR_FILE USING PA_FILE.
*         START-OF-SELECTION
START-OF-SELECTION.
*WE NEED TO MOVE THE PA_FILE INTO ANOTHER VARIABLE OF TYPE STRING
*AS WE ARE GOING TO USE THE SAME IN THE FM:GUI_UPLOAD THERE THE FILE TYPE IS STRING
V_FILE = PA_FILE.
PERFORM UPLOAD_FILE_T0_ITAB USING V_FILE CHANGING IT_DATA.
*FILL THE SCREEN AND FIELD DETAILS
LOOP AT IT_DATA INTO WA_DATA.
REFRESH IT_BDCDATA.
*FIRST SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0200''X'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-KOKRS'.
*OK CODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''/00'.
*CONTROLLING AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOKRS' WA_DATA-KOKRS.
*COST CENTER DETAILS
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOSTL' WA_DATA-KOSTL.
* START DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATAB_ANFO' WA_DATA-DATAB.
*END DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATBI_ANFO' WA_DATA-DATBI.
*NEXT SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0299''X'.
*OKCODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''=BU'.
*SUBSCRN FIELD DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_SUBSCR''BDC-SUBSCR'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-WAERS'.
*NAME
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KTEXT' WA_DATA-KTEXT.
*DESCRIPTION
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-LTEXT' WA_DATA-LTEXT.
*PERSON RESPONSIBLE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-VERAK' WA_DATA-VERAK.
*COST CENTER CATEGORY
PERFORM FILL_FIELD_DETAILS USING'CSKSZ-KOSAR' WA_DATA-KOSAR.
*HIERARCHY AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KHINR' WA_DATA-KHINR.
*COMPANY CODE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-BUKRS' WA_DATA-BUKRS.
*BUISINESS AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-GSBER' WA_DATA-GSBER.
*CALL THE TRANSACTION
CALL TRANSACTION C_KS01 USING IT_BDCDATA
                          MODE C_A "ALL SCREENS
                                   "N-NO SCREENS
                                   "E-ERROR SCREENS ONLY
                          UPDATE 'A' "ASYNCHRONOUS
                                      "SYNCHRONOUS
                          MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
* FORM FILL SCREEN_DETAILS
FORM FILL_SCREEN_DETAILS USING PROGRAM LIKE BDCDATA-PROGRAM
                       DYNPRO LIKE BDCDATA-DYNPRO
                       DYNBEGIN LIKE BDCDATA-DYNBEGIN.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = DYNBEGIN.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDOFRM.
* FORM FILL_FIELD_DETAILS
FORM FILL_FIELD_DETAILS USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDFORM.
* FORM GETE_F4_FOR_FILE
*DISPLAY ALL THE FILES IN THE SYSTEM FOR SELECTION
*P_PA_FILE NAME OF THE FILE
FORM GET_F4_FOR_FILE USING P_PA_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
* EXPORTING
*    PROGRAM_NAME        = SYST-REPID
*    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = 'PA_FILE'
*    STATIC              = ' '
*    MASK                = ' '
   CHANGING
     FILE_NAME           = PA_FILE.
* EXCEPTIONS
*    MASK_TOO_LONG       = 1
*    OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* FORM UPLOAD_FILE_TO_ITAB
* FP_V_FILE = FILE NAME
*FP_IT_DATA = INTERNAL TABLE TO STORE THE DATA
FORM UPLOAD_FILE_TO_ITAB USING FP_V_FILE CHANGING FP_IT_DATA LIKE IT_DATA.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FP_V_FILE
HAS_FIELD_SEPARATOR           = ' X'
TABLES
    DATA_TAB                      =FP_IT_DATA.
ENDFORM.
Edited by: saifudheenc on Aug 7, 2010 5:09 PM

hi
try to add spaces between parameters :
example:
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1' '0200' 'X'.
regards,darek

Problem with Call transaction method in function module

Dear Frndz,
           I am converting its services into webdynpro.
           I developed a rfc[function module] for travel management [TRIP] . In that rfc i used call transaction method[BDC] to upload the data. The same rfc will be called from the frontend[portal].It is working fine in development for whome se37 execution authorization was assigned. It is not working for other users. I hope it is something relevant to authorization .If suppose can i create a authorization object for this rfc and assign it to the profile.
        Normally users can be given authorization to run the tcode.
similarly i want to give the authorization to be given users to execuste this funtion module.
huv can i do it ?? any suggestion.
Rgds.
siva

Use ST01 transaction to start authorization trace, you will then see what authorizations are missing (if your assumption is right of course, i.e. if it's really an authorization problem)

Log file in session and call transaction methods

Hi Experts,
How to see log file in session and call transaction methods?

hi
If its a session then goto SM35, select ur session and then u can see log button over there at the top... that will give the log
If its a call transaction then in ur program u need to declare internal table IT_MSGS like this
DATA: IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
LOOP AT IT_SALES.
    PERFORM POPULATE_BDC.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA
                                  MODE MODE
                                  UPDATE UPDATE
                                  MESSAGES INTO IT_MSGS.
    IF NOT IT_MSGS[] IS INITIAL.
      LOOP AT IT_MSGS.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            ID        = IT_MSGS-MSGID
            LANG      = 'EN'
            NO        = IT_MSGS-MSGNR
            V1        = IT_MSGS-MSGV1
            V2        = IT_MSGS-MSGV2
            V3        = IT_MSGS-MSGV3
            V4        = IT_MSGS-MSGV4
          IMPORTING
            MSG       = V_MSG
          EXCEPTIONS
            NOT_FOUND = 1
            OTHERS    = 2.
        IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        WRITE:/ V_MSG.
      ENDLOOP.
    ENDIF.
ENDLOOP.
This will create a log for you, dont forget to award points if found helpful

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Call transaction method for MM42

Similar Messages

Maybe you are looking for