CALL TRANSACTION 'MM03'

Hi experts, i need your help, how can I see directly the accountancy view from MM03?, thanks ....

I need use
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
But i can't see directly the accountancy view, anybody help me ...

Similar Messages

CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.

Hi,
i'm using this in an report.
SET PARAMETER ID 'BES' FIELD WA_ITAB-EBELN.
SET PARAMETER ID 'BSP' FIELD WA_ITAB-EBELP.
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
It works OK.
Is there any parameter ID to go in a sprecial part of an PO, for example
direct to materialdata or konditions?.
thanks.
Regards, Dieter

Hi,
I think u can do that by using BDC as used in this code please refer to this code.
FORM get_user_command USING cr_ucomm     LIKE sy-ucomm      "#EC *
                            cr_selfield TYPE slis_selfield.
CLEAR wa_final.
DATA BEGIN OF bdcdata OCCURS 10.
          INCLUDE STRUCTURE bdcdata.
DATA END OF bdcdata.
CASE cr_ucomm.
    WHEN '&IC1'.
      READ TABLE it_final INTO wa_final
               INDEX cr_selfield-tabindex.
      IF cr_selfield-fieldname = 'MATNR'.
        IF sy-subrc IS INITIAL.
          SET PARAMETER ID 'MXX' FIELD 'E'.
          SET PARAMETER ID 'MAT' FIELD wa_final-matnr.
          SET PARAMETER ID 'WRK' FIELD wa_final-werks.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
        ENDIF.
      ELSEIF cr_selfield-fieldname = 'LIFNR'.
        IF sy-subrc IS INITIAL.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0101'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-LIFNR'.
          bdcdata-fval     = wa_final-lifnr.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-EKORG '.
          bdcdata-fval     = wa_final-ekorg.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'RF02K-D0310'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'WRF02K-D0320'.
          bdcdata-fval     = 'X'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-fnam     = 'BDC_OKCODE'.
          bdcdata-fval     = '/00'.
          APPEND bdcdata.
          CLEAR bdcdata.
          bdcdata-program = 'SAPMF02K'.
          bdcdata-dynpro   = '0110'.
          bdcdata-dynbegin = 'X'.
          APPEND bdcdata.
          CALL TRANSACTION 'XK03' USING bdcdata MODE 'E'.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM. " get_user_command
regards,
sudha

!urgent!!!!!calling transaction

How to call any view of MM03 from ABAP program,without BDC and call transaction mm03 skip first screen.Please give me some suggestions regarding this. suppose i want to call mm03
mrp1 view from abap program. user sould not interact with any button, it directly display that view for the the corresponding material and plant. Thanks in advance

Hi,
U may try the following code if it is yet to resolve.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA:lw_output LIKE LINE OF t_output.
CASE R_UCOMM.
 WHEN '&IC1'.
 IF RS_SELFIELD-FIELDNAME = 'MATNR'.
Read data table, using index of row user clicked on
 READ TABLE t_output INTO lw_output INDEX
 RS_SELFIELD-TABINDEX.
Set parameter ID for transaction screen field
 if sy-subrc = 0.
 SET PARAMETER ID 'MAT' FIELD lw_output-matnr .
 CALL TRANSACTION 'MM43' AND SKIP first SCREEN.
 CLEAR r_ucomm.
 endif.
 ENDIF.
ENDFORM.
If helpful pl reward.
Cheers.

Skipping multiple screens when calling transaction.

Hi Gurus,
It's quite easy to call transaction mm03 with from an ABAP program.
Filling the parameter ID MAT with the material, and you're good to go.
Call transaction 'MM03' and skip first screen.
So far so good. But is it also possible to enter data for the next screens (you have to select a view and plant). Now the user still has to enter that data and I was wondering if I could do that automatically...
kind regards,
Ron.

Hi
CALL TRANSACTION ta USING bdc_tab
bdc_tab of row type BDCDATA from the ABAP Dictionary
regards
Pavan

Call transaction through ALV

Dear All,
when i am calling transaction VA32 then it is taking same number again and again.
please chk code below:
form sub_user_command1 using V_UCOMM1 like sy-ucomm
v_selfield1 type slis_selfield.
case V_UCOMM1.
 when '&IC1'.
 if v_selfield1-fieldname = 'VBELN'.
 clear it_kun.
 clear wa_kun.
 read table it_kun into wa_kun index v_selfield1-tabindex.
 if sy-subrc = 0.
 set parameter id 'AUN' field wa_kun-vbeln.
 call transaction 'VA32' AND SKIP FIRST SCREEN.
 endif.
 clear V_UCOMM1.
 clear wa_kun.
endif.
endcase.
*clear V_UCOMM1.
*set parameter id: 'AUN' field SPACE.
*Clear 'AUN' with space in byte mode. "id 'AUN'.
endform.
Thanks in Advance,
Ashish Gautam

hi,
u using internal table without header line?
otherwise u can try like this
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CLEAR fcat1.
CASE u_com.
 WHEN '&IC1'.
 READ TABLE itab INDEX sel_field-tabindex.
 IF sy-subrc = 0.
 t_mat = itab-matnr.
 SET PARAMETER ID 'MAT' FIELD t_mat.
 CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
 ENDIF.
ENDCASE.
ENDFORM. "user_command

Call std sap transaction mm03 from bsp

Hi
please can any body tell me.
How do i call a std sap transaction mm03 in bsp application.
is it possible to use call transaction statement directly or any other way.

Hi sushilnath,
Please try this blog : <a href="/people/thomas.jung3/blog/2005/11/04/bsp-150-a-developer146s-journal-part-xvii--recreating-a-standard-transaction">BSP a Developers Journal: Part XVII - Recreating a Standard Transaction</a> by Thomas...
This might help you....
Hope this helps.
Do reward each useful answer..!
Thanks,
Tatvagna.

Error in 'Call Transaction 'LS24'

Hi Abapers,
I am unable to go back to List after pressing back button for this Particular Transaction 'LS24'.It is wokring fine with other Transactions MM03,CS03.
WHEN 'test'.
SET PARAMETER ID 'LGN' FIELD L_WA_VENTRIES-LGNUM.
SET PARAMETER ID 'MAT' FIELD L_WA_VENTRIES-MATNR.
SET PARAMETER ID 'WRK' FIELD L_WA_VENTRIES-WERKS.
CALL TRANSACTION 'LS24' AND SKIP FIRST SCREEN.
thx in advance.
Any idea?
With best regards
Sudip..
Edited by: Sudip Samal on Jul 2, 2009 6:28 PM
Moderator message - Cross post locked
Edited by: Rob Burbank on Jul 2, 2009 12:38 PM

So what messages you are getting in messtab?
sy-subrc = 1.001 means transaction not completed with the given data, this may be due to wrong data passed.
Analyze messtab, you will come to know of the error.
Regards
Karthik D

Unable to Capture ALV output in an Internal Table, after CALL TRANSACTION

Dear all,
My requirement is to run multiple materials in T-code CK86_99 but as we know CK86_99 is only adequate to one material at a time.
So, I want to capture the Output of the T-code in my Internal table with respect to all the Material Numbers I use in the Select-Options of my Z Program.
Below is the Code I developed so far, but the Class
cl_salv_bs_runtime_info=>get_data_ref(
 IMPORTING r_data = lf_ref ).
is not capturing the Ouput...
Please have a look and enlighten me how it could be solved.
TABLES : mara.
DATA : BEGIN OF wa_mara,
matnr TYPE mara-matnr,
END OF wa_mara.
DATA: it_bdcdata TYPE TABLE OF bdcdata,
 wa_it_bdcdata LIKE LINE OF it_bdcdata,
 it_mara LIKE TABLE OF wa_mara.
* BELNR(10).
FIELD-SYMBOLS:<fs_tab> TYPE ANY TABLE,
<fs_line> TYPE any.
DATA:lf_ref TYPE REF TO data,
 lf_ref1 TYPE REF TO data.
SELECT-OPTIONS so_matnr FOR mara-matnr.
PARAMETERS p_werks LIKE t001w-werks.
*BELNR = 'Z92'. " Give Document Number here
SELECT matnr FROM mara INTO TABLE it_mara WHERE matnr IN so_matnr.
DATA opt TYPE ctu_params.
LOOP AT it_mara INTO wa_mara.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMKKB0'.
wa_it_bdcdata-dynpro = '0300'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-MATNR'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-MATNR'.
wa_it_bdcdata-fval = wa_mara-matnr.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-WERKS'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-WERKS'.
wa_it_bdcdata-fval = p_werks.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = 'OSNY'."'ONLI'."=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPLKKRSOO'.
* wa_it_bdcdata-dynpro = '0100'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'BACK'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPMKKB0'.
* wa_it_bdcdata-dynpro = '0300'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'EXIT'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'N'.
cl_salv_bs_runtime_info=>set(
 EXPORTING display = abap_false
 metadata = abap_true
data = abap_true ).
CALL TRANSACTION 'CK86_99' USING it_bdcdata OPTIONS FROM opt.
TRY.
cl_salv_bs_runtime_info=>get_data_ref(
 IMPORTING r_data = lf_ref ).
 ASSIGN lf_ref->* TO <fs_tab>.
 CATCH cx_salv_bs_sc_runtime_info.
 MESSAGE 'Unable to retrieve ALV data' TYPE 'E'.
ENDTRY.
cl_salv_bs_runtime_info=>clear_all( ).
IF <fs_tab> IS ASSIGNED.
 CREATE DATA lf_ref1 LIKE LINE OF <fs_tab>.
 ASSIGN lf_ref1->* TO <fs_line>.
ENDIF.
*LOOP AT <FS_TAB> ASSIGNING <FS_LINE>.
*ENDLOOP.

Hi Abhay,
 If you go to Transaction code SE93, enter the tcode "CK86_99" and click display, you may see the default value for transaction is "KKBB" and the screen field for P_SCREEN = 0300, P_TCODE = ck86_99.
 You may need to copy the transaction code "KKBB" and go to SE93 again, enter the tcode for "KKBB" then click display, now you may see the program name is "RKKB1000".
 Hope this answer your question.
Thanks
Hock Lin

Call transaction error handling

how to maintain the log i.e sucess/failures like below.
Line No. Success/ Failure Document No Error Details
1 S Doc 740000001
2 S Doc 740000002
3 F Co- code does not exist
4 F GL Account does not exist
I'm getting only one last document no: but i need all the documents to be displayed i.e either success/failures.
below is my code.
TYPES: BEGIN OF ty_filedata,
 bukrs TYPE bukrs, "Company code
 blart TYPE blart, "Document type
 bldat TYPE char10, "Document Date
 budat TYPE char10, "Posting date
 xblnr TYPE xblnr, "Reference
 bktxt TYPE bktxt, "Document Header text
 waers TYPE waers, "Currency
 newbs TYPE bschl, "Posting Key for the next line item
 wrbtr TYPE char10, "Amount
 zuonr LIKE bsik-zuonr, "Assignment
 sgtxt TYPE sgtxt, "Text
 newko TYPE hkont, "Account for the next line item
 END OF ty_filedata.
TYPES: BEGIN OF ty_detail_log,
 item_no TYPE i, " Item line no.
 status(1) TYPE c, " Status - success/failure
 doc_no TYPE bkpf-belnr," Document No.
 message TYPE string, " Message
 END OF ty_detail_log.
*& DATA declaration of internal tables
 Internal Table declaration for excel data
DATA: it_itab TYPE STANDARD TABLE OF alsmex_tabline INITIAL SIZE 0,
 Internal Table declaration for upload data
 it_upload TYPE STANDARD TABLE OF ty_filedata INITIAL SIZE 0,
 Internal Table Declaration for BDCDATA
 it_bdcdata TYPE STANDARD TABLE OF bdcdata,
 Internal Table Declaration for BDCMSGCOLL
 it_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll,
 Internal Table Declaration for FILENMAE
 lf_fname TYPE rlgrap-filename.
 t_err_log TYPE STANDARD TABLE OF ty_err
 INITIAL SIZE 0, " table for validation error log
 t_DETAIL_LOG TYPE STANDARD TABLE OF TY_DETAIL_LOG.
 C_MSGNO TYPE BDC_MNR VALUE '312',
*& DATA declaration of work area
 Work Area declaration for Excel Data
DATA: w_itab TYPE alsmex_tabline,
 Work Area declaration for upload data
 w_upload TYPE ty_filedata,
 Work Area declaration for upload data
 w_upload_n TYPE ty_filedata,
 Work Area declaration for upload data
 w_bdcdata TYPE bdcdata,
 Work Area declaration for upload data
 w_bdcmsgcoll TYPE bdcmsgcoll,
 w_detail_log TYPE ty_detail_log.
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
PARAMETERS:p_file TYPE rlgrap-filename. " MODIF ID G1.
SELECTION-SCREEN: END OF BLOCK bk1.
*& AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 dynpro_number = syst-dynnr
 CHANGING
 file_name = p_file
 EXCEPTIONS
 mask_too_long = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& START-OF-SELECTION
START-OF-SELECTION.
DATA: lw_itab TYPE alsmex_tabline.
lf_fname = p_file.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = lf_fname
 i_begin_col = '1'
 i_begin_row = '6'
 i_end_col = '12'
 i_end_row = '999'
 TABLES
 intern = it_itab[]
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE S205(ZF_COMMON_MSGS_FIN1) DISPLAY LIKE C_E.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
IF it_itab IS NOT INITIAL.
 SORT it_itab BY row col.
DELETE it_itab WHERE row LT 6.
 LOOP AT it_itab INTO lw_itab.
 w_itab = lw_itab.
 AT NEW row.
 CLEAR: w_upload.
 ENDAT.
 CASE w_itab-col.
 WHEN '0001'.
 w_upload-bukrs = w_itab-value.
 WHEN '0002'.
 w_upload-blart = w_itab-value.
 WHEN '0003'.
 w_upload-bldat = w_itab-value.
 WHEN '0004'.
 w_upload-budat = w_itab-value.
 WHEN '0005'.
 w_upload-xblnr = w_itab-value.
 WHEN '0006'.
 w_upload-bktxt = w_itab-value.
 WHEN '0007'.
 w_upload-waers = w_itab-value.
 WHEN '0008'.
 w_upload-newbs = w_itab-value.
 WHEN '0009'.
 w_upload-wrbtr = w_itab-value.
 WHEN '0010'..
 w_upload-zuonr = w_itab-value.
 WHEN '0011'.
 w_upload-sgtxt = w_itab-value.
 WHEN '0012'.
 w_upload-newko = w_itab-value.
 ENDCASE.
 AT END OF row.
 APPEND w_upload TO it_upload.
 CLEAR: w_upload.
 ENDAT.
 ENDLOOP.
*endif.
ENDIF.
DATA: lw_upload TYPE ty_filedata,
 lv_lines TYPE sy-tabix,
 lv_index TYPE sy-tabix.
DESCRIBE TABLE it_upload LINES lv_lines.
LOOP AT it_upload INTO lw_upload.
 lv_index = sy-tabix.
 w_upload = lw_upload.
 IF NOT w_upload-bukrs IS INITIAL.
 IF lv_index GT 1.
 CALL TRANSACTION 'FB01' USING it_bdcdata
 MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
 PERFORM fr_format_message_text.
 REFRESH: it_bdcdata.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BKPF-XBLNR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BKPF-BLDAT'
 w_upload-bldat.
 PERFORM bdc_field USING 'BKPF-BLART'
 w_upload-blart.
 PERFORM bdc_field USING 'BKPF-BUKRS'
 w_upload-bukrs.
 PERFORM bdc_field USING 'BKPF-BUDAT'
 w_upload-budat.
 PERFORM bdc_field USING 'BKPF-WAERS'
 w_upload-waers.
 PERFORM bdc_field USING 'BKPF-XBLNR'
 w_upload-xblnr.
*perform bdc_field using 'FS006-DOCID'
 PERFORM bdc_field USING 'RF05A-NEWBS'
 w_upload-newbs.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 w_upload-newko.
 ENDIF.
 IF lv_index NE lv_lines.
 lv_index = lv_index + 1.
 READ TABLE it_upload INTO w_upload_n INDEX lv_index.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-WRBTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 w_upload-wrbtr.
 PERFORM bdc_field USING 'RF05A-NEWBS'
 w_upload_n-newbs.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 w_upload_n-newko.
 ELSE.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-WRBTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=BU'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 w_upload-wrbtr.
 ENDIF.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-ANLN1'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
ENDLOOP.
CALL TRANSACTION 'FB01' USING it_bdcdata
 MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
PERFORM fr_format_message_text .
REFRESH: it_bdcdata.
*& Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro = dynpro.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO it_bdcdata.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM bdc_field USING fnam fval.
IF fval <> space.
 CLEAR w_bdcdata.
 w_bdcdata-fnam = fnam.
 w_bdcdata-fval = fval.
 APPEND w_bdcdata TO it_bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form fr_format_message_text
FORM fr_format_message_text.
DATA: lf_msg TYPE string.
WRITE:/ sy-uline(125).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE : /1 sy-vline,
 2 text-041 , "'record Number',
 16 sy-vline,
 17 text-042 , " 'success/failure',
 35 sy-vline,
 36 text-043, " 'document no',
 55 sy-vline,
 56 text-044, "'Error details',
 125 sy-vline.
WRITE:/ sy-uline(125).
LOOP AT it_bdcmsgcoll INTO w_bdcmsgcoll.
 CALL FUNCTION 'FORMAT_MESSAGE'
 EXPORTING
 id = w_bdcmsgcoll-msgid
 lang = sy-langu
 no = w_bdcmsgcoll-msgnr
 v1 = w_bdcmsgcoll-msgv1
 v2 = w_bdcmsgcoll-msgv2
 v3 = w_bdcmsgcoll-msgv3
 v4 = w_bdcmsgcoll-msgv4
 IMPORTING
 msg = lf_msg
 EXCEPTIONS
 not_found = 1
 OTHERS = 2.
 IF sy-subrc EQ 0.
 WRITE:/01 sy-vline,
 02 sy-tabix,
 16 sy-vline,
 17 w_bdcmsgcoll-msgtyp,
 35 sy-vline,
 36 w_bdcmsgcoll-msgv1,
 55 sy-vline,
 56 lf_msg,
 125 sy-vline.
 WRITE:/ sy-uline(125).
 ENDIF.
ENDLOOP.
ENDFORM. "fr_format_message_text
Thanks in advance.

Hi Neelima,
Just put the following code within that LOOP...ENDLOOP statement.
LOOP AT it_upload INTO lw_upload.
CALL TRANSACTION 'FB01' USING it_bdcdata
MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
PERFORM fr_format_message_text .
REFRESH: it_bdcdata.
ENDLOOP.
Regards,
R.Nagarajan.
We can -

BDC Call Transaction - Doc.No not getting generated in Message Internal tab

Dear All,
I am using BDC Call Transaction method for uploading data for transaction, Iam able to successfully capture the Error messages, sucess messages and the transaction number is also displayed for the bdc run in Mode A, but in case of scheduling the job in background, the Error messages are displayed but the transaction number is not captured in the message Internal table( BDCMSGCOLL).
Kindly look into the matter and revert back for any further info.
Regards
Naresh

Hi,
Please try using the following kind of code in 'CALL TRANSACTION'
    opt-dismode = 'E'.     " Exclusive mode
    opt-defsize = 'X'.
    opt-updmode = 'S'.
    opt-nobinpt = ' '.
    CALL TRANSACTION transaction_code USING ft OPTIONS FROM opt
                                                                         MESSAGES INTO t_bdcmsgcoll .
Hope this will work.
Thanks,
Leo

VALUES not getting passed in t.code 'FMY3' VIA call transaction 'FMY3'

hi guru's,
i have created a ALV report for funds precommitment,when i click the document number,the respective document is not opening
i have coded like this
IF selfield-value IS NOT INITIAL.
        READ TABLE final INDEX selfield-tabindex.
        SET PARAMETER ID: 'KBL' FIELD final-belnr,
                          'KBP' FIELD final-blpos.
        CALL TRANSACTION 'FMY3' AND SKIP FIRST SCREEN.
      ENDIF.
the transaction is called,but with empty value in the field and the document is not opening....please help me with this regard...
    thanks in advance,
regards,
Balaji.S

Hello Venkat.O,
i have a similar problem with the overwrite of the memory ID, when calling transaction FMY3. In the code block you mentioned, the system gets the right value from the memory ID, that i've set before calling the transaction. But i found that after that the system runs in the include LFMFRO01, the code
MODULE init_suppress OUTPUT.
IF status2 = st2_app.                "/Genehmigen/Ablehnen
Lesen aus Memory: wird in WF-Methode 'APPROVE' gefüllt
    IMPORT wfdata TO g_f_wfdata FROM MEMORY ID con_memid_wf.
    IF NOT g_f_wfdata-belnr IS INITIAL.
      IF g_f_wfdata-blpos = space.
        g_f_wfdata-blpos = con_initial_blpos.
      ENDIF.
      kbld-belnr = g_f_wfdata-belnr.
and here the system gets the memory of the last document created and overwrites the selecion-screen field KBLD-BELNR with that value. And the value i had stored in the parameter ID 'MRV', and that the system gets it right in the code you show, is overwritten..
This seems like a bug from SAP, don't you think?
This way the system will always show the last doc. when calling transaction, after setting a parameter ID..

BDC Call Transaction : FS00(Create G/L Account)

Hi,
BDC of FS00 is running properly in Forground (A) Mode, with success messages and G/L account being created in SKB1 table.
But when I run it in Background (N) Mode, it is not creating the G/L account. Although I am getting the success messages in the end of the execution but in the table, there is no G/L account.
FORM fill_bdcdata .
loop at i_output.
clear i_bdcdata.
refresh i_bdcdata.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=ACC_CRE'.
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_KEY-BUKRS'.
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-SAKNR'
 i_output-SAKNR. "gl ac number
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-BUKRS'
 i_output-BUKRS. "company code
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=2102_GROUP'.
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_COA-KTOKS'. "ac grp
*perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
 i_output-cc.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
 i_output-xplacct. "pl account
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
 i_output-xbilk. "balance sheet
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=TAB02'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
 i_output-ktoks. "ac grp
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
 i_output-xplacct. "pl account
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_COA-TXT50_ML'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'
 i_output-txt20_ml. "short text
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'
 i_output-txt50_ml. "long text
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=TAB03'.
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-MITKZ'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XSALH'
 i_output-xsalh. "Only Balance in Local Currency
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
 i_output-mwskz. "Tax Category
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XMWNO'
 i_output-xmwno. "Posting without tax
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'
 i_output-mitkz. "Reccon A/C
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-ZUAWA'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XOPVW'
 i_output-xopvw. "Open Item Management
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XKRES'
 i_output-xkres. "Line Item Display
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
 i_output-zuawa. "Sort Key
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTER'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
 i_output-fstag. "Field Stauts
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XINTB'
 i_output-xintb. "post automatically
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-XGKON'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XGKON'
 i_output-xgkon. "relevent to cash A/c
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-ZUAWA'.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '=SAVE'.
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-FSTAG'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
 i_output-fstag. "Field Stauts
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XINTB'
 i_output-xintb. "post automatically
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XGKON'
 i_output-xgkon. "relevent to cash A/c
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
 '/EEXIT'.
perform bdc_field using 'BDC_CURSOR'
 'GLACCOUNT_SCREEN_CCODE-XGKON'.
perform bdc_dynpro using 'SAPLSPO1' '0100'.
perform bdc_field using 'BDC_OKCODE'
 '=YES'.
perform f_elog.
endloop.
FORM f_elog .
data len type i.
clear i_msgtab.
call transaction 'FS00'
 using i_bdcdata
 mode g_v_mode "N
 messages into i_msgtab
 update g_v_update . "S
write: i_output-saknr.
I am not getting where I am going wrong in the code.
Regards,
Priyanka.

Hi,
Make the mode 'E' and see excatly, where the warning or errors or coming.
If you are having an currency or UOM ,related fields, see that the values should not be empty. If they are enpty. Put an if condition there and Quit filling such fields.
First keep in mode 'e' and debug. 100% you will see the warnings or errors, then tell me what is the error.
call transaction 'FS00'
using i_bdcdata
mode g_v_mode "E
messages into i_msgtab
Thansk'
Manju.

Improve performance of bdc call transaction

Hi all,
I am performing a batch update of tax codes in a BDC call transaction program. This particular code takes about 3 minutes to process 2,600 entries. I have tried almost everything but is there a way to improve / make it run faster?
I have a feeling it has something to do with the form "do_transaction", but I really don't know anymore.
Thank you in advance.
Attached is the code:
*& Report ZFI_CHANGEWTAX
*& Description: Change Doctors Withholding Tax Code (EI)
*& Using BDC Call Transaction Method
*& Created by : mpena
*& Created on : 07/15/2009
*& Modification History
*& Seq Changed on
*&       Changed by
*& 001   07/15/2009
*&        mpena         Initial Development
*& 002   07/20/2009
*&        mpena         Logic modification
*&                      Testing
*& 003   07/20/2009
*&        mpena         Call function parameter modification
*& 004   07/22/2009
*&        mpena         Report generation
*&                      Performance improvements
REPORT zfi_changewtax
       NO STANDARD PAGE HEADING
       MESSAGE-ID zfk02msg.
TYPES: BEGIN OF t_tax,
       lifnr LIKE lfa1-lifnr,                "account number
       wt_withcd LIKE lfbw-wt_withcd,        "current tax code
       wt_withcd_new LIKE lfbw-wt_withcd,    "new tax code (left blank at default)
       END OF t_tax.
DATA: wa_tax TYPE t_tax,
       i_tax TYPE STANDARD TABLE OF t_tax,
       it_bdcdata TYPE bdcdata OCCURS 0 WITH HEADER LINE,
       lin TYPE i.
-------Selection Screen Design -
SELECTION-SCREEN:
SKIP 1,
BEGIN OF BLOCK blk1 WITH FRAME TITLE aaa.
PARAMETERS: p_ktokk LIKE lfa1-ktokk DEFAULT 'DOCT' OBLIGATORY,
            p_bukrs LIKE lfbw-bukrs DEFAULT 'SL' OBLIGATORY,
            p_wtax LIKE lfbw-wt_withcd OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
aaa = 'Change Tax Code to specified value'.
TOP-OF-PAGE.
WRITE:
/ 'Update of taxes successful on:', sy-datum, sy-uzeit,
/ 'Generated by:', sy-uname,
/ 'Company Code:', p_bukrs, 'Vendor Group:', p_ktokk.
SKIP 1.
ULINE.
WRITE:
/ 'Account Number', 20 'Old Withholding Tax Code', 50 'New Withholding Tax Code'.
ULINE.
START-OF-SELECTION.
SELECT lfa1~lifnr
         lfbw~wt_withcd
INTO TABLE i_tax
FROM lfa1 INNER JOIN lfbw
    ON lfa1lifnr = lfbwlifnr
    WHERE lfbw~bukrs EQ p_bukrs
    AND lfbw~witht EQ 'EI'.
IF sy-subrc EQ 0.
    DESCRIBE TABLE i_tax LINES lin.
ENDIF.
Update i_tax with new value of wt_witchd, then display for comparison.
After write: if old and new tax are the same, tax update was not successful for that specific account
or inputted tax type is the same as the old one.
LOOP AT i_tax INTO wa_tax.
    wa_tax-wt_withcd_new = p_wtax.
    MODIFY i_tax FROM wa_tax.
    WRITE:
    / wa_tax-lifnr,
    20 wa_tax-wt_withcd,
    50 wa_tax-wt_withcd_new.
    CLEAR wa_tax.
ENDLOOP.
PERFORM do_transaction USING p_bukrs p_wtax.
*&      Form do_transaction
     Extracted from ZFKO2 recording accessible in shdb.
FORM do_transaction USING v_bukrs v_wtax.
MESSAGE i000 WITH lin.
LOOP AT i_tax INTO wa_tax.
    REFRESH it_bdcdata.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0106'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RF02K-D0610'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RF02K-LIFNR'
                                  wa_tax-lifnr.
    PERFORM bdc_field       USING 'RF02K-BUKRS'
                                  v_bukrs.
    PERFORM bdc_field       USING 'RF02K-D0610'
                                  'X'.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0610'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFBW-WT_WITHCD(01)'.
    PERFORM bdc_field       USING 'LFB1-QLAND'
                                  'PH'.
    PERFORM bdc_field       USING 'LFBW-WT_WITHCD(01)'
                                  v_wtax.
    PERFORM bdc_dynpro      USING 'SAPMF02K' '0610'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=UPDA'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'LFB1-QLAND'.
    PERFORM bdc_field       USING 'LFB1-QLAND'
                                  'PH'.
    CALL TRANSACTION 'FK02' USING it_bdcdata
                            MODE   'N'
                            UPDATE 'A'.
ENDLOOP.
MESSAGE i001.
ENDFORM.                    "do_transaction
       form for bdc dynpro
FORM bdc_dynpro USING program
                      dynpro.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
CLEAR it_bdcdata.
ENDFORM.                    "bdc_dynpro
       form for bdc field
FORM bdc_field USING fnam
                      fval.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
CLEAR it_bdcdata.
ENDFORM.                    "bdc_field

You might want to try using a BAPI instead of a call transaction.   I believe "BAPI_VENDOR_SAVECHARVALREPLICA" will work for you. Calling a BAPI is just like calling a function module.   After you call the bapi remember to commit it with the function module "BAPI_TRANSACTION_COMMIT".

Doubt in uploading using call transaction method

hi all
i am uploading f-29 in call transaction method .. i have a problem in currency field, the currency field is not picking up it shows a error that input field is longer than screen field .. i have declared currency field as type BSEG-WRBTR(same as screen field ...how to go about
thanks
lokesh

Hi,
When you use the database value directly in your BDC, you will have this issue. It is always advisable to use character fields when doing BDC. so change it to charecter field and try it..
Regards
Sudheer

Call transaction from alv

i am calling a transaction from alv i want to select the check boxes on th called transaction and go to the next screen how do i do that

Hello Chandan
You have to handle the DOUBLE_CLICK event either in your callback form routine (FM-based ALV) or event handler method for event USER_COMMAND (ABAP-OO based ALV).
If you call the transaction directly you will not have the authority check for this transaction. If you need this, you can use function module ABAP4_CALL_TRANSACTION instead.
If you want to open the transaction in a new window you can use the static method CL_RECA_GUI_SERVICES=>CALL_TRANSACTION (no authority check!).
Regards
Uwe

CALL TRANSACTION 'MM03'

Similar Messages

Maybe you are looking for