Calling a already existing mapping from a java mapping

Hi.
Is it possible to get a reference to an existing graphical mapping in a new java mapping or new user defined function?
Rod

Hi,
If you have the mapping to run one after another and you need the output of mapping1 as input of mapping2 then you can add this in Interface mapping one after the other with required Message Interface.
Don't know if you can refer to a standard Graphical mapping in a Java mapping?
Regards
Vijaya

Similar Messages

Re-use message mapping from within java mapping?

Hi there,
I have a question regarding java mapping. What I would like to do is to re-use an existing message mapping from within java mapping.
Technicaly, message mapping is perfomed by com.sap.aii.mappingtool.tf3.AMappingProgram.execute, right? I would like to call that mapping program for a specifc message mapping from within my java mapping.
Pseudo java code would look like this:
public void execute(InputStream in, OutputStream out)
throws StreamTransformationException {
com.sap.aii.mappingtool.tf3.AMappingProgram.execute(in,out,'SomeMessageMapping');
SomeMessageMapping is a message mapping that is defined in the integration repository.
Is it possible? If so, could you provide me with some details?
Thank you and best regards,
Wolfgang

Hi Wolfgang,
very interesting idea?
I would activa a dummy message mapping. than I would have a look in the file directory of the java-stack and try to find out the name of the *.class or *.jar file.
On the other hand you could generate a tpz-transport-file an unpack this file, to explore the name of the *.class or *.jar
Unfortunately I do not have access to the file system. So I can't explore the name.
Regards Mario

Call ABAP FM from XI Java mapping

Can you please provide me some documentation on how to make a call to ABAP function module from Java mapping.
Basically this would be a RFC lookup from Java mapping.
Any recomendations on which one is a standard approach among ABAP Mapping vs JAVA mapping within XI.
Your responses are appreciated.
TNV

Hi TNV,
<i>I am more looking into using RFC call from java mapping.</i>
The article by Michal can be used to make the RFC lookup not only from an User Defined Function but also from a java mapping.
You can write any piece of java code inside the EXECUTE() method of your Java Mapping including the RFC Lookup API code in michal's article.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/xi%20mapping%20lookups%20rfc%20api.pdf
Regards.
Bhavesh

How to call a PL/SQL procedure from a Java class?

Hi,
I am new to the E-BusinessSuite and I want to develop a Portal with Java Portlets which display and write data from some E-Business databases (e.g. Customer Relationship Management or Human Resource). These data have been defined in the TCA (Trading Community Architecture) data model. I can access this data with PL/SQL API's. The next problem is how to get the data in the Java class. So, how do you call a PL/SQL procedure from a Java program?
Can anyone let me know how to solve that problem?
Thanks in advance,
Chang Si Chou

Have a look at this example:
final ApplicationModule am = panelBinding.getApplicationModule();
try
     final CallableStatement stmt = ((DBTransaction)am.getTransaction()).
                                                                                     createCallableStatement("{? = call some_pck.some_function(?, ?)}", 10);
     stmt.registerOutParameter(1, OracleTypes.VARCHAR);
     stmt.setInt(2, ((oracle.jbo.domain.Number)key.getAttribute(0)).intValue());
     stmt.setString(3, "Test");
     stmt.execute();
     stmt.close();
     return stmt.getString(1);
catch (Exception ex)
     panelBinding.reportException(ex);
     return null;
}Hope This Helps

How can I call a pop up window from a java class ?

Hi,
I am developing a web app. I would like to call a windoz pop up from a java class.
How can i do that ?
Thanks

user504072 wrote:
It was possible to do it in ASP .NET even from the server side with the method Page.ClientScript. What do you think what Page.ClientScript stands for?
I's an encapsulation for the JavaScript code required and hides the separation between frontend and backend. There was a reason why so many developers stick to the MVC-pattern wich ist violated here.
I did not know it is not possible to do the same thing in Java.I'ts not a task of the backend to layout the user interaction GUI.
bye
TPD

Calling a soap web service from a java desktop application

Hi,
Does anyone know how to call a soap web service from a java desktop application? I've seen examples using Apache Axis, but it sounds like Axis needs to run on a web server and we are trying to avoid that. My initial thought was that, "of course we need a web server", but I'm wondering if there is a way to do this without a web server.
Any help is greatly appreciated.
thank you,
Julie

If you are the consumer you don't need any web server. The web server is only needed in the provider end.
In java 6 there is a built in framework to call web services without the need of third parties (such as apache axis)
take a look at:
https://jax-ws.dev.java.net/guide/Developing_client_application_with_locally_packaged_WSDL.html
http://java.sun.com/webservices/technologies/index.jsp
For the provider end there is also a built in http server to expose web service via HTTP without the need to
use any external web server.
take a look at:
http://java.sun.com/javase/6/docs/api/javax/xml/ws/Endpoint.html

Component called BANKNAME already exists. already 5 BANKNAME(000015) in dynamic table

Dear All,
In R3, company wise bank balance has to display for the given period, after that when i click on company it has to drill down to bankwise balance has to display so i have used two dynamic table to display alv. when i click on company i have got Component called BANKNAME already exists. already 5 BANKNAME(000015).
Kindly suggest solution.
Thanks & Regards,
Ranjini

When you create a dynamic internal table, don't give twice (or five times) the same name to different fields but use an increment in their names (e.g. BANKNAME01, BANKNAME02, BANKNAME03, etc.
Regards,
Raymond

How to execute an ABAP Mapping after a Java Mapping

Hi, i have found a Bug in XI and SAP said to me that the only solution is to execute an ABAP mapping after my java mapping.
I have an IDOC to FILE scenario
Could anyone orient me on what do i have to configure, so after my java mapping i can execute an abap mapping ?.
Do i have to use process integration?
thanks
Mariano.

i have developed a Java mapping originally, but XI has a bug. When you do not write anything to the outputStream XI instead of writing an emtpy file writes a file containing one byte ( 0x00 ) and this is a problem.
SAP said to me that they will not fix this issue so they recomend me to create an abap mapping after my java mapping that will send no information if it receives this byte (0x00) and if not it will write all the information as received.
My doubt regarding putting several mappings in the interface mapping configuration is this...
Actual configuration:
SOURCE MSG A -> ORIGINAL MAPPING -> TARGET MSG B
Proposed configuration
SOURCE. MSG A -> ORIGINAL MAPPING -> TARGET MSG B
SOURCE. MSG A -> PATCH MAPPING -> TARGET MSG B
I dont understand what receives de "patch mapping" it receives the structure from TARGET MSG B?
regards
mariano

Call a VB dll (com) from a java

hi
I need to call Vb dll from a java.
this dll is a com object,, whit a database calling.
i neet to see a example, please.
[email protected]

Well, if you don't want to switch to the microsoft virtual machine, you can try the classes from nevaobject.com. These will allow you to use the sun jvm and work with com objects. Using these is a bit combersome, but I can attest to their validity. Here is the link.
http://www.nevaobject.com/
If you want to persue this, I would be happy to provide code examples.
-DB

Calling a webservice(JAX-RPC) from non java client ?

Hi,
I read JAX-RPC is used for accessing webservices by calling the webservice methods from a java-based client.
Is it possible to call the Webservice methods(writeen using jax-rpc) from a non-java client,who sends his request in the form of SOAP based calls?
If JAX-RPC is not the correct one to call a RPC from a non-java client,In what way i can do this?
Can anyone please clarify my doubt..,
Thanks in Advance
Rao.,

Hi Arun,
Can i write a my client program using cgi scripts?
In the JAX-RPC docs it was said that i can invoke my Webservices through my Service endpoints or using WSDL location?
If iam using a Non-java Client,it will be easier(I think) to use the WSDL file to call the Web-Service(deployed using JAX-RPC).But,the Client should be aware of that WSDL file.
I have to develop a small Application using webServices(must use XML,SOAP technologies).The user will pass some Parameters as request and the Response should be an XML(SOAP message) message.User should be able to request via browser.(http://localhost:8080/)
Can you please suggest me which technology is correct to use,so that i can use the XML,SOAP in it.
Please let me know...,
thank you once again..,
Regards
Rao.,

N:1 Mapping Possible using Java Mapping?

All,
Is it possible to do a N:1 mapping using Java Mapping?
If yes , how?
Reason for this question is that the execute() of the Java Mapping is going to take the source / request message as the InputStream . In the case of N:1 mapping , as we have multiple messages , how will they be send to the InputStream? Will both the messages be sent combined into the InputStream? Will the MESSAGES tag be embedded into the input stream?
Regards,
Bhavesh

Hi @ll;
i try the same.
to conduct a java mapping with 2 input structures that fills one target structure.
This mapping is part of a Integrationprocess.
I tested the mapping at the Integration Repository (Interface mapping) with the structure given by henrique and it works fine without any error.
At runtime this structure looks like this (different prefix)
<?xml version="1.0" encoding="UTF-8"?>
<sxi:Messages xmlns:sxi="http://sap.com/xi/XI/SplitAndMerge">
     <sxi:Message1>
          <YOURXML1>...</YOURXML1>
     </sxi:Message1>
     <sxi:Message2>
          <YOURXML2>...</YOURXML2>
     </sxi:Message2>
</sxi:Messages>
As I put it in the Integrationprocess unfortunately a strange error arises.
The trace Workflow-Protocoll shows following error.
<Trace level="2" type="T">Call method execute of the application Java mapping com.endress.infoserve.xi.mapping.MergeConfigStore_IdocOrder </Trace>
<Trace level="2" type="T">Java mapping com/endress/infoserve/xi/mapping/MergeConfigStore_IdocOrder completed. (executeStep() of com.endress.infoserve.xi.mapping.MergeConfigStore_IdocOrder </Trace>
<Trace level="1" type="T">Parsing error after multi mapping.Expected Message<i> instead of IDOC </Trace>
I can't make head nor tail of it.
what´s the mistake?
can anybody please help me?
Thanks in advance
Kind regards

UDF in message mapping instead of Java Mapping. Pls advice urgent

Hi All,
My scenario
CRM --- XI -- CRM
In XI I have to open socket connection.
Pls refer link:
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
Can Java Mapping code given in above link for socket connection can be used in Message Mapping (CRM -- CRM)UDF?
Pls advice urgent
Regards

Hi Henry,
I understood your requirement.
But as per the architecture of XI/PI some message has to trigger your scenario.
In this case there is no adapter where you can directly communicate with CRM system.
Do one thing configure a dummy scenario on the sender side.
Use File adapter for simplicity. once it pools the file with some dummy data in the file it comes to Interface mapping(message mapping) of the PIPELINE steps. Now use the code as you mentioned above(within UDF) for opening socket to CRM system and implement you business logic within that program and write the response to target interface which will infact talk with CRM system.
Dont forget to do the coding in an infinite loop with some delay (if required). Other wise every time you have to put a message for File Adapter for triggering purposes.
You can also acheive the same if you use Java Mapping instead of Graphical mapping with UDF(code for Opening socket and business logic). I suggest you to use Java Mapping.
I dont know how you will comunicate with CRM system on receiver side.?
Thanks,
Gujjeti

How to create context sensitive help and call the role based help from my Java Project?

Hello All,
I am new to Robo Help. I have created a Robo help for my Java Web Applicaion. My application is role base i.e some user's will not see some of the pages of the application. So I want to hide those pages in Robo help as well. I tried creating multiple TOC for different Roles.
My Question is
How to call robo Help from my application?(I will be calling using java script. If it is with RoboHelp_CSH.js where can I get that and How to implement it in my project)
How to implement role based help?
Thanks,
Siva.

I answered that. My point in asking whether it matters was that if it does, then you cannot use content categories and point different users to different categories and not allow them to see the others.
The alternative, as I said, would be to produce different outputs for each role.
As it does matter, then using webhelp you will have to use your RoboHelp project to produce a number of outputs, one for each category. Your app would install each webhelp into different folders and when your app determines the user role, you will link to the appropriate help.
There is another thread running where it has been explained by Willam van Weelden that you can achieve what you want using browser based AIR help. If that form of help can be considered, then the thread is at http://forums.adobe.com/message/4914753?tstart=0#4914753
Browser based AIR help must be run from a web server. It cannot be installed locally.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When to call a BAPI inputexecute method from webdynpro-java?

Hello... I'm a little concerned about a situation I'm having. The thing is that I'm trying to use the Bapi_Qualiprof_Change bapi with some test and hard coded data for a future application. It works fine if I fill the input profile_add table in the init() method of my view and then directly call the onActionModifyQualification method (inside the same init() where i filled the parameters).
On the contrary, if I change the code that intializes the data to the onActionModifyQualification or create an special method to initialize it wich is called later with an action button, then it doesn't work.
After many test I noticed that i have to call the bapi execute method right in the init... is there something I can do to fix it? or is it that i must do it in order to make it work?
I have my controller's context mapped to the bapi's model and the view context mapped to the controller's one.... is it good or do i have to build a similar structure to capture the parameters before and then copy the values into the controller's context??
Thanks a lot!!

Thanks for your answer, but it doesn't let me do that because wdModifyView is static. Therefore if 2 people are trying to use it, it's goning to be all mixed up, isn't it?
Anyway, what I really want is executing the bapi when I press the button (that's when it should call the action that calls the bapi). But it only works if I call the action in the init method.

Installing firefox 4 on mac window says a newer item called firefox already exists

I downloaded FF4, clicked on the download and a window came up saying drag the FF icon to applications. When I do, a warning windo pops up saying "there is already a newer item called firefox. Do you want to replace it with this older one?"

Try to drag the old Firefox version to the trash to see if that allows to install the new version.
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
See also [[/questions/795198]]

Calling a already existing mapping from a java mapping

Similar Messages

Maybe you are looking for