Calling AIX database from Windows

Hi,
I've the following requirment.
When any files is added in particular folder in Windows NT, I need to add that file name in a database(DB2) which resides in AIX(IBM's Unix) Operating System?
Please, let me know how to acheive the same.
Thanks & Regards
Venkatesh C

Hallo,
I would suggest using JDBC or JDBC/ODBC to access the DB2 database on the AIX machine.
A question: how are you planning to tell whether a file is added to the Windows NT directory? Does your application add the file? If so, then you 'know' automatically that you need to add the filename to your database.
If anyone can add a file to the folder, then I would question whether Java was the right language. It might be easier to use C/C++. Under NT (it is some years since I did this), you can install a callback function, which must be written with C/C++ which is called whenever a file is added to a directory. You can than use the callback function to trigger your database update.

Similar Messages

I had migrated Oracle 10g database from Windows to Oracle 11g Linux

I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Please guide me where I have to begin (starting point) looking into it.
Some document stated gather system statistics. How to check system statistics is up to date
What are the crucial initialization parameter ?

Hi,
Let me just point you out to the documentation, which may concern you:
I had migrated Oracle 10g database from Windows to Oracle 11g Linux. The database is performing very slow.
Managing Optimizer Statistics
How to check system statistics is up to date
Managing Optimizer Statistics
What are the crucial initialization parameter ?
Configuring a Database for Performance
Thanks &
Best Regards,

How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?

Hi,
How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?
Db Version: 10.2.0.2
Thanks,
Yusuf

Also see MOS Doc 403522.1 (How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows)
HTH
Srini

Moving oracle 9i database from windows 2000 to windows 2003 server

hi everybody,
plz provide me a solution how to move oracle 9i database from windows 2000 server to windows 2003 server with step by step and also with commands plz as i am very new to oracle
thanks in advance
suresh

Install 9i on windows 2003 server and patch to the same level as the Oracle on Windows 2k
Shutdown and make a cold backup of your old database. That includes datafiles, controlfiles, redo files, init file (spfile)
Copy and put these files to the exact same directory structure/location, for example if old file is under D:\oradata\mysid\ then the file on new file should be under same directory. (If you are using Network Storage that make things easier, just mapping to the same drive letter.)
Also make sure archive log dest and all dump dest directories are created. You don't have to copy all old logs and dump files over.
Use oradim to create a new service for the database instance
http://www.psoug.org/reference/oradim.html
Set proper ORACLE_HOME, ORACLE_SID envionment varibles
Run netca to configure listener, actually copy listener.ora and tnsnames.ora to $ORACLE_HOME\network\admin will do
Try to start the database

Migrating database from windows to linux using dbca templates

Hi every one,
Is it possible to migrate Oracle10g database from Windows to Linux by using DBCA templates?????????????
If yes please guide me, as i tried it and am getting error while creating database on linux using DBCA templates of Windows server.
Warm regards,
Veeresh.S
(Oracle DBA)

With DBCA you can create a new database, delete a database, create ASM, and manage templates.
There's no option of migrating a database from one platform to the other. If you want to migrate your database from Windows to Linux you have 2 ways of doing it:
1 using IMP/EXP Export you db on windows and Import it on Linux.
2 Use across platform transportable tablespace if you db is already on 10g.
Regards,
Tony

Migrating database from windows to unix

Can anyone, please suggest me some reading on migrating a database from windows to unix? Thanks

Yes an export import is the most likely migration path you have. There is another option. You may install, just temporarily a 10g environment on the windows platform, then upgrade using the DBUA from 8i to 10g on the same platform. This way you will make sure you don't miss a piece of data during the migration process.
Once your database is at the 10g platform, you may proceed with a transport tablespace from 10g win to 10g unix. Violà, your database will be on the 10g platform.
Next, deinstall the windows temporary 10g installation.
Notes:
1. Make sure your 8i db is at the latest patchset available at 8i (8.1.7.4.0)
2. Define which unix platform you are referring to. It's because of endian issues.
~ Madrid.

Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ?

Hi Friends,
Is it possible to Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ? ( as i would like to perform Point In Time recovery)
(or) The only way is to use RMAN convert as mentioned here - Transporting Data Across Platforms
(or) Is there any other method (except exp/imp and data pump)
Regards,
DB

HI
his post describes the procedure required to migrate a database from Windows to Linux using the RMAN Convert Database command.
Both Windows and Linux platforms have the same endian format, which makes possible to transfer the whole database, making the migration process very straightforward and simple.
To migrate between platforms that have a different endian format, Cross Platform Transportable Tablespaces (XTTS) needs to be used instead.
List of Steps Needed to Complete the Migration
The migration process is simple, but as it has several steps it is convenient to be familiar with them before running it.
1. Check platform compatibility between source and target OS
2. Start the database in read only mode
3. Check database readiness for transport from Windows to Linux using DBMS_TDB.CHECK_DB
4. Check if there are any external objects
5. Execute the Rman Convert database command
6. Copy converted datafiles, generated Transport Script and Parameter File to Linux
7. Edit the init.ora for the new database
8. Edit the Transport Script and Parameter File changing the windows paths to Linux Paths
9. Execute the Transport Script
10.Change the Database ID
11.Check database integrity
Thank you

Is it possible to move the local CD database from Windows to Mac?

I have/had iTunes installed on a Windows box. Windows knows all my CD and track titles (some customised from those in the online CDDB). There are more than 250 CDs, so it is a lot of data (if I have to retype it all...)
I have recently moved to a Mac. The ripped library files copied across just fine (even kept the album artwork).
However, the Mac doesn't know any CD/track titles, so when I insert a CD, there are no names. The Mac is not on the net, and probably never will be. I want to move the copy of the local CD database from the windows machine to the Mac. Is this possible? How?
Dual G4 Tower Mac OS X (10.3.9) Also Windows XP
Dual G4 Tower Mac OS X (10.3.9) Also Windows XP

I imagine you will need to network your PC with your Mac to transfer or transfer your Library from your PC to an external drive then hook this up to your Mac and transfer.

Converting a Database from Windows 2003 Server to HP-UX Itanium

Hi
I have to convert a database Oracle11g (11.1.0.6.0) from Windows 2003 Server to HP-UX Itanium. Both installation are in the same version. I know there are methods to convert it with RMAN ( Restore/Recover converting the database files ) or with transportable tablespaces. Can you give advices or comment me your experiencies on it ?.
Thanks

The RMAN's convert command is going to be needed if the endian format of both the o/s is not same. I didn't check this so please check that whether the source and target are on the same endian or not. If not, you must use the RMAN. If yes, then using transport tablespace would do the job.
HTH
Aman....

Unable to connect to database from windows command prompt

Hi All,
Im trying to connect to Oracle database from my windows command prompt, these are the steps I followed:
1) cd C:\oracle\product\11.2.0\client_1\sqlplus
2) sqlplus username\password@hostname:1521\service_name
I do get the error ORA-06401: NETCMN: invalid driver designator
I did try using the SQLPLUS \NOLOG
Connect username\password@hostname:1521\service_name
I still get the same error.
I did manually type all the commands to make sure no additional charaters coming and etc...How shall I overcome this...

user9103174 wrote:
Hi All,
Im trying to connect to Oracle database from my windows command prompt, these are the steps I followed:
1) cd C:\oracle\product\11.2.0\client_1\sqlplus
2) sqlplus username\password@hostname:1521\service_name
I do get the error ORA-06401: NETCMN: invalid driver designator
I did try using the SQLPLUS \NOLOG
Connect username\password@hostname:1521\service_name
I still get the same error.
I did manually type all the commands to make sure no additional charaters coming and etc...How shall I overcome this...do you desire/plan on using EZCONNECT or tnsnames.ora entry?
EZCONNECT sample is below
sqlplus user1/pass1@'dbserver:1521/orcl_sid'

Call native methods from windows dll

Hello all,
I want to call BlockInput method from User32.dll. My source code looks something like this:
public class User32Dll_1 {
     static {
          try {
               System.loadLibrary("User32");
          catch (Exception ex)
               ex.printStackTrace();
     public static void main(String[] args) throws UnsatisfiedLinkError {
          BlockInput (true);
     /** @param b
     * @dll.import("USER32")*/
     private static native boolean BlockInput(boolean bBOOL);
And the problem is that I get the following exception:
java.lang.UnsatisfiedLinkError: BlockInput
     at User32Dll_1.BlockInput(Native Method)
     at User32Dll_1.main(User32Dll_1.java:27)
Exception in thread "main"
Can someone provide me a solution for this?
Thank you in advance!

can't do
use JACOB
http://danadler.com/jacob/
or
http://www.ezjcom.com/

Moving a database from windows oracle xe to linux oracle 10g Enterprise

I tried exporting my database in windows oracle xe over the network to oracle 10g Enterprise Edition on a linux platform but I got the following error message:
---10.0.2.0 not compatible.
I then did a local export in windows and moved the dumpfile to linux and I got the following error message:
---Bad dumpfile
Please kindly assist me with a suggestion on how to migrate my database.
Thanks.
Lauretta.

Which version of Oracle do you run on windows?
I think, you didn't move the dump file using binary option on linux and that is why you got 'bad dump'.
Make sure you ftp the file in binary mode.
Jaffar

Connect to Oracle Database from Windows Mobile

Is there any Oracle Client product that will allow Windows mobile powered devices to connect to an oracle database? I'm using .net and the compact framework 2.0.
Anyone have a clue?
Regards,
Andras Eliassen

I think I would call it a client tool. Maybe I wasn't so precise in my previous post, sorry. What I need is basically this:
I have a 9i database that is running on a unix box on my network. I have created a Visual Basic .Net application that is using ODT to select, insert, update and delete records in this database - and also executes some stored procedures.
Now I'm trying to move to the next step, and I want my windows mobile powered device/phone to do the same thing - Select, insert, update, delete and execute stored proc/pckgs on the database.
The only way I have found to do this, is by implementing some webservice or something in between my windows mobile device, and the database, because I cannot find dataaccess drivers/components (ODT or the like) that will work on a windows mobile powered device.
Any suggestions?
Regards,
Andras Eliassen

Restore database from windows to linux

Hi,
I want to restore my Oralce in windows to another Linux box,
my windows is windows 2003 R2 64bit, Oracle 11.2.0.2
and my Linux is Oracle Linux 5.5, Oracle 11.2.0.3,
I managed to create an instance in the linux box, restore the controlfile and datafile and catalog the archivelogs,
but when I do recovery, below errors prompt
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2012 14:54:44
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/cloudfs/archivelog/O1_MF_1_26954_7Z9K3WC0_.ARC'
ORA-10562: Error occurred while applying redo to data block (file# 6, block# 669493)
ORA-10564: tablespace TEST
ORA-01110: data file 6: '+DATA/ofs5/datafile/test.264.787934051'
ORA-10561: block type 'TRANSACTION MANAGED INDEX BLOCK', data object# 91719
ORA-00600: internal error code, arguments: [ktbair2_0], [2239], [3712], [], [], [], [], [], [], [], [], []
is that mean it is not possible to restore the db from one platform to another?
(I read some oralce note that it is possible to setup datagurad between window and linux)
Thank
Vincent

Vincent;
is that mean it is not possible to restore the db from one platform to another?It's possible, but there's quite a lot of planning that needed to be done.
The Database Backup and Recovery User's Guide should have a section on Transporting Data Across Platforms.
http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmxplat.htm
You need to use dbms_tdb.check_db to test if it can be done with the OS's you have in mind.
There's a fairly good example here, but not using the exact OS's you have in mind.
http://mohamedazar.com/2011/06/08/transport-an-entire-database-to-a-different-platform/
My understanding is it won't transport certain items :
Control files and Redo logs
Bfiles
Temp files
External tables
Directories
Password files
Also you need to create a new instance before you can use RMAN backups from the source.
Here's another example :
https://blogs.oracle.com/AlejandroVargas/entry/database_migration_from_window
Best Regards
mseberg

Error when calling Get-AzureBiztalkService from Windows Azure BizTalk Services Management Sample

I've downloaded and built the Windows Azure BizTalk Services Management Sample from
https://code.msdn.microsoft.com/windowsazure/Windows-Azure-BizTalk-91e1bdf3
I've imported the module into PowerShell and have run the following script successfully
$sub = '<subscription id>'
$cert = get-childitem -path cert:\CurrentUser\My\<certifcate thumbprint>
Set-AzureSubscription -SubscriptionName "Test" -SubscriptionId $sub -Certificate $cert
select-azuresubscription -SubscriptionName "Test"
replacing <subscription id> with my Azure subscription id from the portal and <certifcate thumbprint> with a thumbprint from a self signed certificate in my personal store.
am now trying the following command
get-azurebiztalkservice -resourcename "oraman8"
where "oraman8" is my BizTalk Service and getting the following
Get-AzureBizTalkServiceProperties : Error in subscription or certificate.
At line:1 char:1
+ Get-AzureBizTalkServiceProperties -ResourceName "oraman8"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (:) [Get-AzureBizTalkServiceProperties], Exception
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Management.BizTalkService.GetAzureBizTalkServiceProperties
thanks in advance for any help
Omar

Are you not using port 1433 for SQL? Is the telnet successful on that port?

Calling AIX database from Windows

Similar Messages

Maybe you are looking for