Calling another report by passing selection screen parameter

Hi,
I have created a report "ZREPA" with selection screen parameter say, "creator".
Nw, i hv to call that report "ZREPA" from another report say "ZREPB" by passing an value to the selection screen field "creator".
Can anyone tell me how to resolve this??
Thanks,
Aaru.

Hi,
You can call one selection screen from other selection screen program using SUBMIT command.
The syntax is as follows -
codeSUBMIT... VIA SELECTION-SCREEN
USING SELECTION-SET <var>
WITH <sel> <criterion>
WITH FREE SELECTIONS <freesel>
WITH SELECTION-TABLE <rspar>.[/code]
e.g.
The following executable program (report) creates a selection screen containing the parameter PARAMET and the selection criterion SELECTO:
codeREPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.[/code]
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
rspar TYPE TABLE OF rsparams,
wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
/ 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
WHEN 4.
seltab-sign = 'I'. seltab-option = 'BT'.
seltab-low = 1. seltab-high = 5.
APPEND seltab.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH paramet eq 'Selection 1'
WITH selecto IN seltab
WITH selecto ne 3
AND RETURN.
WHEN 5.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
wa_rspar-low = 14. wa_rspar-high = 17.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
wa_rspar-low = 'Selection 2'.
APPEND wa_rspar TO rspar.
wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
wa_rspar-low = 10.
APPEND wa_rspar TO rspar.
SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
AND RETURN.
ENDCASE.
=> To leave a called program, you can use SUBMIT .... AND RETURN. by choosing F3 or F15 from list level 0 of the called report.
Regards,
Omkaram.

Similar Messages

F4 help for a selection screen parameter with filename created dynamically

Hi All,
          I have a requirement where in an F4 help should be present for a selection screen parameter. After selecting the filepath and clicking OK button on the Dialog, the filename should be dynamically get created in the selection screen parameter field. For example:
if the path is D:\DOCS then at the end of DOCS the filename should automatically get populated.
Like below string:
D:\DOCS\new.txt
Is there any function module or method which does this kind of activity.
Thanks in advance,
Deepak

this code will help:
FORM get_filename CHANGING p_filename.
DATA      : lv_filename TYPE string,
              lv_rc TYPE i,
              li_filetable TYPE filetable.
CONSTANTS : lc_fname TYPE string VALUE 'ZRPP4000.XLS',
              lc_fpath TYPE string VALUE 'C:\',
              lc_extn TYPE string VALUE 'XLS'.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      default_filename        = lc_fname
      initial_directory       = lc_fpath
      default_extension       = lc_extn
    CHANGING
      file_table              = li_filetable
      rc                      = lv_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc = 0 .
    READ TABLE li_filetable INTO lv_filename INDEX 1.
    IF sy-subrc = 0.
      p_filename = lv_filename.
    ENDIF.
ENDIF.
REFRESH li_filetable.
CLEAR:lv_filename.
ENDFORM.                    "get_filename
" p_filename is selection screen parameter

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

Pass selection screen value to ALV

Hi
I need to pass selection screen values to ALV top of page. How to do this?

Hi,
Have a look on the following example.
TYPE-POOLS: SLIS.
TABLES: LFA1.
SELECT-OPTIONS: LIFNR FOR LFA1-LIFNR.
DATA: BEGIN OF ITAB OCCURS 0,
 LIFNR LIKE LFA1-LIFNR,
 NAME1 LIKE LFA1-NAME1,
 ORT01 LIKE LFA1-ORT01,
 LAND1 LIKE LFA1-LAND1,
 REGIO LIKE LFA1-REGIO,
 END OF ITAB.
SELECT * FROM LFA1 INTO CORRESPONDING FIELDS OF TABLE ITAB UP TO 5 ROWS.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
 HEADER TYPE SLIS_T_LISTHEADER WITH HEADER LINE,
 FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME = ITAB
I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
 CT_FIELDCAT = FLDCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
 I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
 IT_FIELDCAT = FLDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: S(10).
S = 'TO'.
FORM TOP-OF-PAGE.
HEADER-TYP = 'S'.
HEADER-KEY = 'LIFNR'.
CONCATENATE LIFNR-LOW LIFNR-HIGH INTO HEADER-INFO SEPARATED BY SPACE.
APPEND HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = HEADER[]
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
ENDFORM.
Reward,if useful.
Thanks,
Chandu

How to Remove the underline from the selection screen parameter

How to remove the underline from a selection screen parameter ?

>
Anoop Menon wrote:
> hi Avinash,
>
> I am not able to understand the use of the 'comment line properly.
>
> The last part of the statement which says modif id is confusing.
>
> Please clarify..... I am unable to activate my code when I put the selection screen commebnt statement.
Use this and update it to your requierement !
SELECTION-SCREEN begin of line.
SELECTION-SCREEN COMMENT 1(30) comm.
PARAMETERS test(1) type c.
SELECTION-SCREEN end of line.
INITIALIZATION.
comm = 'test'.

How to pass selection screen parameters in text elements?

how to pass selection screen parameters in text elements?

don't you mean he other way around. Assign text-elements (selection texts) to select options?
This you do in the menu where you can find text-elements, selection texts.
menu Goto->text elements->selection texts.
Edited by: Micky Oestreich on May 10, 2008 2:45 PM

Selection screen parameter

hi friends,
for the below given description i have to create selection screen parameter .
can u suggest how to solve this.
#times excess qty
Default value: If control class-pseudo no.1 = "NonCtrl then value = 3 Else value = 2. User able to change the default value.
regards,
siri.

HI Raj,
fromm the below PSEUDO CODE i have retrived ALNUM . but the values of this ALNUM has to be moved to the parameter in selction screen. my doubt is how can i do this one is in AT SELECTION SCREEN AND ONE IN DATA SELECTION IS IN START-OF-SELECTION.
1. Control Class: Write Ctr Vault if MAEX-ALNUM(export control class) = ("CNTROL2" or "CNTROL2N") and Write Ctrl Cage if MAEX-ALNUM = ("CNTROL3" or "CNTROL3N" or "CNTROL4" or "CNTROL5") else Write NonCtrl where MATNR=VBAP-MATNR and match with the user-specified input in selection criteria (see section 5).
REGARDS,
SIRI.

Passing selection screen values to the next report using CALL TRANSACTION

Hi experts,
I have 2 reports. In the first report i have the 3 input fields in the first report, how do i pass the values to the next report which is transaction: ZKKBC_PKO_2.
I want to display in the next report the selections that the user previously selected.
First report:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Anyone can help me?
Thanks,
Lawrence

Hi experts,
What i did is this:
Using SET PARAMETER
in the first report
SET PARAMETER ID 'WRK' FIELD COMP.
SET PARAMETER ID 'VPE' FIELD PERIOD.
SET PARAMETER ID 'GJR' FIELD YEAR.
CALL TRANSACTION 'ZKKBC_PKO_2'.
Second Report
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: WRK     LIKE AFRU-WERKS.
PARAMETERS: VPE     LIKE COEP-PERIO.
PARAMETERS: GJR     LIKE COEP-GJAHR.
SELECTION-SCREEN END OF BLOCK blk1.
Using SUBMIT
First Report
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: COMP     LIKE AFRU-WERKS OBLIGATORY MODIF ID s1.
PARAMETERS: PERIOD   LIKE COEP-PERIO OBLIGATORY MODIF ID s1.
PARAMETERS: YEAR     LIKE COEP-GJAHR OBLIGATORY MODIF ID s1.
SELECTION-SCREEN END OF BLOCK b1.
SUBMIT ZCO_PRDCOST_ACTUAL_2 VIA SELECTION-SCREEN USING SELECTION-SETS OF PROGRAM 'ZCO_PRDCOST_ACTUAL_1' AND RETURN.
Second Report:
GET PARAMETER ID 'WRK' FIELD comp.
GET PARAMETER ID 'VPE' FIELD COEP-PERIO.
GET PARAMETER ID 'GJR' FIELD YEAR.
Either this 2 ways i still cannot get the first report selection values on the 2nd report. Can someone help me see if my codes is correcT?

How to pass Selection screen values to another program's selection screen

Hello,
I have a requriement where in which i need to pass the selection screen values (say list of pernrs) and few others of one program to selection screen of another.
One option that i came across is using Submit. But am unware how to pass only the selection screen values (there wont be any data processing or filtering). Just the values of one prgm's selection screen are to be sent to another.
Thanks
RK

prog1.
data:lt_params type table of RSPARAMS.
data:wa like line of lt_params.
parameters:pa1 type sy-datum.
select-options:so1 type sy-dtaum.
wa-SELNAME = 'PA2'.               "Seletion screen field name
wa-KIND     = 'P'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = pa1.                    "Selection Option Low,Parameter value
append wa to lt_params.
loop at so1.
wa-SELNAME = 'SO2'.               "Seletion screen field name
wa-KIND     = 'S'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = so1-low.               "Selection Option Low,Parameter value
wa-HIGH     = so1-high.               "Selection Option Low,Parameter value
append wa to lt_params.
endloop.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
    report                 = 'ZPROG2.'   "report name of ur tocde
    RET_VIA_LEAVE          = ''            "IF 'X' returns to the called program after execution
    SKIP_SELSCREEN         = 'X'       "If 'X' selection screen of called program is not displayed
TABLES
   SELECTION_TABLE        = lt_params       "Contains values to the selection screen
EXCEPTIONS
JUST_VIA_VARIANT       = 1
NO_SUBMIT_AUTH         = 2
OTHERS                 = 3
Prog2.
parameters:pa2 type sy-datum.
select-options:so2 type sy-dtaum.
write pa2.
skip 1.
loop at so2.
write:so2-low,so2-high.
skip 1.
endloop.
Edited by: Keshu Thekkillam on Aug 20, 2009 3:22 PM

How to pass value from the Z Report to the selection screen of the std rep

Dear Experts,
i have developed a report and the values are maintained only in internal table based on some condition. When I execute the report, for example MM60, there is a material number field for multiple selection.
the report should call the standard transaction and pass the values from the internal table to the multiple selection- material number of the standard transaction.
the standard transaction should never get executed automatically. Only the value should get passed from internal table to the standard t code. Please help.
regards,
Shankar

Hai
Go through the following Documents
SUBMIT rep.
Additions
1. ... LINE-SIZE col
2. ... LINE-COUNT lin
3. ... TO SAP-SPOOL
4. ... VIA SELECTION-SCREEN
5. ... AND RETURN
6. ... EXPORTING LIST TO MEMORY
7. ... USER user VIA JOB job NUMBER n
8. ... Various additions for parameter transfer to rep
9. ... USING SELECTION-SETS OF PROGRAM prog
Effect
Calls the report rep . Leaves the active program and starts the new report rep .
Addition 1
... LINE-SIZE col
Effect
Prints the report with the line width col .
Addition 2
... LINE-COUNT lin
Effect
Prints the report with lin lines (per page).
Addition 4
... VIA SELECTION-SCREEN
Effect
Displays the selection screen for the user. In this case, the selection screen is redisplayed after return from the report list display - the user's entries are retained.
Addition 5
... AND RETURN
Effect
Returns to the calling transaction or program after the called program has been executed. SUBMIT ... AND RETURN creates a new internal mode .
Addition 6
... EXPORTING LIST TO MEMORY
Effect
Does not display the output list of the called report, but saves it in SAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. You can read the saved list from SAP memory with the function module 'LIST_FROM_MEMORY' and then (for example) store it in the database with EXPORT . You can process this list further with the function modules 'WRITE_LIST' , 'DISPLAY_LIST' ... of the function group "SLST" .
Addition 7
... USER user VIA JOB job NUMBER n
Effect
Schedules the specified report in the job specified by the job name job and the job number n . The job runs under the user name user and you can omit the addition USER user . The assignment of the job number occurs via the function module JOB_OPEN (see also the documentation for the function modules JOB_CLOSE and JOB_SUBMIT . This addition can only be used with the addition ...AND RETURN .
Note
When scheduling a report with the SUBMIT ... VIA JOB job NUMBER n statement, you should always use the addition ...TO SAP-SPOOL to pass print and/or archive parameters. Otherwise, default values are used to generate the list and this disturbs operations in a production environment.
Addition 9
... USING SELECTION-SETS OF PROGRAM prog
Effect
Uses variants of the program prog when executing the program rep .
Note
Important
The programs prog and rep must have the same SELECT-OPTIONS and PARAMETER s. Otherwise, variants of the program prog may be destroyed.
Note
When using this addition, the specified variant vari of the program prog is taken in USING SELECTION-SET vari . On the other hand, all variant-related actions on the selection screen of rep (Get , Save as variant , Display , Delete ) refer to the variants of prog .
Example
SUBMIT REPORT01
VIA SELECTION-SCREEN
USING SELECTION-SET 'VARIANT1'
USING SELECTION-SETS OF PROGRAM 'REPORT00'
AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00 .
Note
Runtime errors
LOAD_PROGRAM_NOT_FOUND : The specified program was not found.
SUBMIT_WRONG_TYPE : The specified program is not a report.
SUBMIT_IMPORT_ONLY_PARAMETER : Only one value passed to a report parameter.
SUBMIT_WRONG_SIGN : Invalid value passed to a selection with the addition SIGN .
SUBMIT_IN_ITAB_ILL_STRUCTURE : Table passed to a selection with WITH sel IN itab had an unexpected structure.
Try with this Example
Data: listobject like abaplist occurs 1 with header line.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1 .
IF sy-subrc <> 0.
message ID '61' TYPE 'E' NUMBER '731'
with 'LIST_FROM_MEMORY'.
ENDIF.
Thanks & regards
Sreenivasulu P

WD application-selection screen - Parameter passing error

Hi,
In my WD application selection screen I am using a parameter(COSP-VERSN)
When i read this using read context i am getting an error saying "Could not find attribute KOKRS"
In context I have created a node with COSP-VERSN. My Kokrs will be contstant everytime.
For getting my version I need to pass KOKRS values.How can overcome this issue?
Here is the read context for versn which I have created in context Create-> NODE Option
DATA lo_nd_pversn TYPE REF TO if_wd_context_node.
 DATA lo_el_pversn TYPE REF TO if_wd_context_element.
 DATA ls_pversn TYPE wd_this->element_pversn.
* navigate from <CONTEXT> to <PVERSN> via lead selection
 lo_nd_pversn = wd_context->get_child_node( name = wd_this->wdctx_pversn ).
* get element via lead selection
 lo_el_pversn = lo_nd_pversn->get_element( ).
* get all declared attributes
 lo_el_pversn->get_static_attributes(
 IMPORTING
 static_attributes = ls_pversn ).
Rgds
Vara

Resolved myself by creating a custom Dropdownbykey.
Rgds
vara

How to use a parameter of a report program from selection screen in a dialog program

how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

Problem in passing selection screen values using CALL TRANSACTION.

Hi All
I am facing problem in transfering selection screen values to the called transaction. I am trying to pass the path of the transaction filer but to no avail. The variable for filepath is not empty.
Below is my code:
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFBASM00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'RFPDO1-FEBUMSF'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'RFPDO1-FEBUMSF'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'PASS'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
opt-dismode = 'E'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Please help.
Harsh

Hi Harsh,
I think you have entered wrong main program for tcode 'FF_5' and wrong screen field for the file name. Use the below code instead of yours.
DATA: lt_bdcdata TYPE TABLE OF bdcdata,
       wa_bdcdata TYPE bdcdata,
       opt TYPE ctu_params,
       gv_filepath type char128 value 'C:\testfile.txt'.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'RFEBKA00'.
wa_bdcdata-dynpro   = '1000'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'UMSFILE'.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'UMSFILE'.
wa_bdcdata-fval = gv_filepath.
APPEND wa_bdcdata TO lt_bdcdata.
CLEAR wa_bdcdata.
*wa_bdcdata-fnam = 'BDC_OKCODE'.
*wa_bdcdata-fval = 'PASS'.
*APPEND wa_bdcdata TO lt_bdcdata.
*CLEAR wa_bdcdata.
opt-dismode = 'A'.
opt-updmode = 'S'.
CALL TRANSACTION 'FF_5' USING lt_bdcdata OPTIONS FROM opt.
Thanks.
Regards,
Jey

How to put a value in a selection screen parameter

how do i forcefully put a value to a field in the selection screen.
i mean during runtime.
and it's a parameter not a selection-option.
thanks

Hi,
Check this sample code.It can help you.Basically you need to use 'DYNP_VALUES_READ' in at selection-screen on value-request for s_posnr-low.
tables : vbap. " Sales Document: Item Data
 Constant Declaration *
CONSTANTS:
C_X TYPE C VALUE 'X'. " Translate to Uppercase
 Variable Declaration *
Variable for Table index
data v_sytabix like sy-tabix.
Variable for Program name
data L_NAME LIKE SYST-REPID.
Range for getting values form selection screen
DATA: BEGIN OF range1 OCCURS 0,
 SIGN(1),
 OPTION(2),
 LOW LIKE vbap-vbeln,
 high like vbap-vbeln,
 END OF range1.
Internal table for Report output
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of i_vbap.
Internal table for output to the F4 help
data: begin of I_DISPLAY occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of I_DISPLAY.
Internal table for return value form function module
DATA: BEGIN OF I_RETURNVAL OCCURS 0.
 INCLUDE STRUCTURE DDSHRETVAL. " Interface Structure Search
DATA: END OF I_RETURNVAL.
Internal table for F4 help field heading
DATA: I_FIELDTAB LIKE DFIES OCCURS 0 WITH HEADER LINE.
Internal table for getting screen values from selection screen
data L_SCR_FIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME title text-001.
select-options:
 S_VBELN for vbap-vbeln no intervals,
 S_POSNR for vbap-posnr no intervals.
SELECTION-SCREEN end OF BLOCK B1.
at selection-screen on value-request for s_posnr-low.
clear: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
refresh: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
L_NAME = SYST-REPID.
MOVE 'S_VBELN-LOW' TO L_SCR_FIELDS-FIELDNAME.
APPEND L_SCR_FIELDS.
Call the Function module DYNP_VALUES_READ to get the values form
selection screen
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = L_NAME
 DYNUMB = SYST-DYNNR
 TRANSLATE_TO_UPPER = C_X " X
 TABLES
 DYNPFIELDS = L_SCR_FIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11
IF SY-SUBRC eq 0.
 LOOP AT L_SCR_FIELDS.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = L_SCR_FIELDS-FIELDVALUE.
 range1-high = space.
 append range1.
 ENDLOOP.
ENDIF.
F4 help Field headings
I_FIELDTAB-TABNAME = 'I_DISPLAY'.
I_FIELDTAB-FIELDNAME = 'VBELN'.
I_FIELDTAB-POSITION = '1'.
I_FIELDTAB-OUTPUTLEN = '10'.
I_FIELDTAB-INTTYPE = 'C'.
I_FIELDTAB-INTLEN = '10'.
APPEND I_FIELDTAB.
I_FIELDTAB-FIELDNAME = 'POSNR'.
I_FIELDTAB-POSITION = '2'.
I_FIELDTAB-OFFSET = '10'.
I_FIELDTAB-OUTPUTLEN = '6'.
I_FIELDTAB-INTTYPE = 'N'.
I_FIELDTAB-INTLEN = '6'.
APPEND I_FIELDTAB.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_display
 where vbeln in range1.
Call the function module F4IF_INT_TABLE_VALUE_REQUEST for F4 values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'POSNR'
 WINDOW_TITLE = 'Line Item'
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = C_X " (for muliple selection)
 TABLES
 VALUE_TAB = I_DISPLAY
 FIELD_TAB = I_FIELDTAB
 RETURN_TAB = I_RETURNVAL
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Star for For single values
READ TABLE I_RETURNVAL INDEX 1.
 S_POSNR-LOW = I_RETURNVAL-FIELDVAL.
End for the single values
Start For multiple selection
 loop at i_returnval.
 s_posnr-sign = 'I'.
 s_posnr-option = 'EQ'.
 s_posnr-low = I_RETURNVAL-FIELDVAL.
 append s_posnr.
 endloop.
 sort s_posnr.
 read table s_posnr index 1.
End for multiple selection
ENDIF.
 Start-of-selection *
start-of-selection.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_vbap
 where vbeln in s_vbeln
 and posnr in s_posnr.
if the above selection is successful continue the process else exit *
form the report
if sy-subrc ne 0.
 message e002 with 'No data to display'.
endif.
end-of-selection.
if not i_vbap[] is initial.
 loop at i_vbap.
 write:/ i_vbap-vbeln, i_vbap-posnr.
 endloop.
endif.

Add selection-screen parameter in HUMO

Hi everybody,
I need to add selection-screen parameters in transaction HUMO.
I tried to create an new specific program with a subscreen. This subscreen is a copy of subscreen 2050 of program RHU_HELP and I had my news parameters to it.
But the problem is that I don't know how to call my subscreen instead of subscreen 2050.
I see in debug the structure ORDER_CRITERIA which contains the value of program and screen but there is no enhancement point in "AT-SELECTION-SCREEN OUTPUT" so I can't replace the program and screen values by my specifics.
I set it in the "INITIALIZATION PART" but it function only one time so it is not good.
Have you an idea to solve my problem or another way to add news selection-screen parameters in HUMO?
Thanks for your help.

Hi Dixitha,
Use implicit enhancement option.
Desplay the report in se38.
In Menu, go to Edit > Enhancement Operations > Show Implicit Enhancement Options.
The system will show you lines (in color) where you can add your enhancement.
This function will allow you to add business rules, substitute fields, do extra calculations, and other unique, non-standard requirements.
Reddy

Calling another report by passing selection screen parameter

Similar Messages

Maybe you are looking for