Calling Form from Another program
All.
I have program A and program B. While executing Program A i need to call a perform (form) from Program B and result out this needs to flow into program A
Like Program B having a form f_select_data
form f_select_data.
select * from mara into table it_mara
where matnr in s_matnr
endform.
I need to call this from program A and results back to A
a®
Try this:.
In Z_PROGRAM use function
..PERFORM get_data_from_z_program in Y_PROGRAM.
In Y_PROGRAM write:
FIELD-SYMBOLS: <qals>. (example for qals table)
* inspection lot data
DATA: t_qals LIKE qals OCCURS 0 WITH HEADER LINE.
DATA: wa_qals LIKE LINE OF t_qals.
ASSIGN ('(Z_PROGRAM)QALS[]') TO <qals>.
IF NOT ( <qals> IS INITIAL ) .
t_qals[] = <qals>.
READ TABLE t_qals INTO wa_qals INDEX 1.
IF sy-subrc = 0.
qals = wa_qals.
ENDIF.
ENDIF.
hope helps..
Similar Messages
-
Error when calling a form from another program
Hi all,
I'm using the following code in EXIT_SAPLV50Q_001:
PERFORM STATIC_CREDIT_CHECK(SAPLVKMP)
USING '' LIKP-KKBER LIKP-KNKLI '' 'X'
CHANGING RC_CHECK_A RC_CHECK_F RC_WARNING RC_ERROR RC_STATUS_SET CMPSA
I'm getting the following error:
GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned in line LOCAL: XVBKD-PRSDT which is in FORM MESSAGE_EXCEEDED_VALUE.
I have assigned a value for field XVBKD-PRSDT so it won't be initial, but this was not helpful.
Any ideas would be appreciated.
HagitHi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit -
Calling application form from another application form
hi
I am working on application forms in SAP-ISU. I wanted to call one application form from another application form. Please help me.
Regards,
suresh
[email protected]Hi,
Suppose there r 2 applications X and Y. There will be 1 programe associated with each applications.
We have to change the programe of 1 application and call 2nd programe in the 1st programe using SUBMIT keyword.
Reward points if useful.
Regards
(YUGANDHAR.P) -
How to call an alv report from another program and return back
Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY
AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
SeemaHi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'LIST_TO_ASCI'
* EXPORTING
* LIST_INDEX = -1
* WITH_LINE_BREAK = ' '
TABLES
listasci = t_ascilist
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
WRITE:/ 'Below are the lines from the submitted program.'.
LOOP AT t_ascilist.
WRITE:/ t_ascilist-line.
ENDLOOP.
SKIP 2.
ENDIF.
ENDIF.
IMPORT t_mara FROM MEMORY ID 'T_MARA'.
WRITE:/
'Here is the output from the table exported from the submitted program.'
LOOP AT t_mara.
WRITE:/ t_mara-matnr.
ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
s_maktx FOR v_maktx.
START-OF-SELECTION.
SELECT matnr INTO TABLE t_makt
FROM makt
WHERE matnr IN s_matnr
AND maktx IN s_maktx.
if not t_makt[] is initial.
SELECT * FROM mara
INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
WHERE matnr = t_makt-matnr.
endif.
EXPORT t_mara TO MEMORY ID 'T_MARA'.
WRITE:/ 'This list is from the submitted program'.
SKIP 1.
LOOP AT t_mara.
WRITE:/ t_mara-mtart.
ENDLOOP.
Hopes this helps you.
Thanks,
Ashok. -
Problem regarding calling a program from another program
Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumikSubmitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND "Warehouse number/complex
vbeln = w_screen1000-io_vbeln. "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr TYPE st_iblnr,
* Define internal table and work area for select-options
l_selection TYPE rsparams,
li_selection TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
CLEAR l_selection.
l_selection-selname = 'IM_IBLNR'. "Option name
l_selection-kind = 'S'. "S= select options P=Parameters
l_selection-sign = 'I'. "Sign
l_selection-option = 'EQ'. "Option
l_selection-low = l_iblnr-iblnr. "Value
APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas -
Query about Calling One Form from Another using Personalization
Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
ShankarHi Shankar,
Please refer my article on metalink
Zoom to AR Transactions and AR Receipts Form from Collections Form using Forms Personalization - Doc ID: 430643.1
This article explains how to open the AR transactions form from another form. When it opens the form it automatically queries for the Invoice number of the calling form. You should be able to use this logic for your requirement.
Hope this helps.
Thanks,
Anil -
Calling infobus form from another.
Hi
Here is a brief description of the problem.
A simple data form is created using JDeveloper2.0's wizard. It is an Infobus based dataframe,which has a simple gridcontrol fetching data from the dept table. This form is in the pacakge,
package1.
Another form is made with a master detail relationship between dept and employee table, in the package, package2.
Now a button control is added on the first form( which is in package1) and the following code is added to the actionperformed event.
void buttonControl1_actionPerformed(ActionEvent e) {
Frame f = new package2.Frame1();
f.show();
Essentially, it calls the form in package2 when the button is pressed. Once this action is performed, the login dialog box of the form in package2 appears. After which it throws the following error and shows a blank form.
DAC-405: SessionInfo: Application module creation failed; className: ConnectionTrade
JBO-00200: A Generic exception occurred during loading Customizations.
null
If I add a button in the second form, (ie. the one in pacage2 having a master detail relationship) and call dept form (in package1) from here, it works.
We are stuck with this problem, and unable to proceed with deploying the application. As each form need to be called and invoked from a menu.
Thanks in advance.
RaviHi,
You can do like this :
mainApplication(Menu)
+------------ Frame1
|
+------------ Frame2
In MainApp you call your frame, and remove from code the
windowListener of the frame. Replace the dispose(); in frame
methods fileExit(ActionEvent e) & processWindowEvent(WindowEvent
e), by try { finalize(); } catch (java.lang.Throwable ex) {
ex.getMessage(); }
It works great.
Bart
Gopal (guest) wrote:
: Hi,
: I am calling an infobus form from another one. Once I close the
: called form, I want the control to go back to the calling one.
: I tried dispose in the called form. It doesnot work. (Gives a
: null pointer exception and crashes everything). Both the frames
: are extended from infoframe. What is the right way to do this?
: Thanx,
: --Gopal
null -
Calling Custom Form from Another Form
Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
ShankarHi ,
I found similiar solution on another forum as below.
http://it.toolbox.com/blogs/apps-traction-blog/how-to-create-a-zoom-using-oracle-form-personalization-12081
This works fine for the Purchasing form and allows me to zoom to the Supplier form.
But in my case, I want to zoom from the Supplier Form to my CUSTOM form. I replicated the exact steps as per the link.
However, it does NOT work as expected. It gets up to the ENTER QUERY mode in my CUSTOM form and remains in Enter Query mode. If I manually then Press key F11 to execute the query it brings back all records.
Do I need to do anything special in my CUSTOM form to make it behave in a similiar way to the Supplier Form ?
Thanks
Shanky -
What are the 3 ways to call a form from another form?
What are the 3 ways to call a form from another form?
What is the command to call a report from within a form?
How do you attach a menu to a form?Hi,
1. Should be new_form, call_form and open_form
2. The command is run_product
3. There is a property 'Menu Module' in form, just change it to your menu file name
Regards,
George
Can anyone help me with the following questions...
What are the 3 ways to call a form from another form?
What is the command to call a report from within a form?
How do you attach a menu to a form?
Thanks for your time..
Madhu -
How to call Oracle form .from another application like VB 6.0
Dear ALL,
I want to call oracle(Developer) form ,from another application (VB 6.0).I want to call the form in such
a way that user dont need to enter login and password.I will hard code the username and password
in my VB 6.0 application.User only press a button on Visual Basic 6.0 form and and that button will
open required Orcale form.How can I DO this.PLEASE HELP............
RegardsYou have the command in VB 6.0 to run any exe files right (I think it is the system command). Next to that command place the following code to run your forms application
ifrun60.EXE <forms.fmx with complete path> userid=<username>/<password>@<connection string>.
Regards,
Senthil .A. Perumal. -
HOW TO CALL A FORM FROM ANOTHER FORM
HOW TO CALL A FORM FROM ANOTHER FORM [local machine]
Balraj wrote:
HOW TO CALL A FORM FROM ANOTHER FORM [local machine]The way you asked question is this bit of request or order?
Secondly, you used capital latters which are being treated as Shouting Language. So, always try to switch off the Capslock of your keyboard.
Thirdly, you are very lazy to serach on forum or google for your problem instead of waiting someone to anwer your question.
Your should seriously have a look at FAQ.
http://wikis.sun.com/display/Forums/Forums+FAQ
Also here.
http://www.catb.org/~esr/faqs/smart-questions.html
Please read documentation for the initial questions.
-Ammad -
CALL TRANSACTION 'ME33K from another program
Hi,
I ma trying to CALL TRANSACTION 'ME33K from another program, but it is not working. The transactions is opening, but it is not opening with the contract number (ls_ekpo-ebeln) i am passing.
ls_ekpo-ebeln does have a valued when CALL TRANSACTION 'ME33K is called.
In debug, I noticed the "value" is blank when step into CALL TRANSACTION 'ME33K .
WHEN 'EBELN'. "Contract
l_field = 'EVRTN'.
IF ls_ekpo-ebeln <> ''.
GET PARAMETER ID 'VRT' FIELD l_field. "EVRTN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
CALL TRANSACTION 'ME33K AND SKIP FIRST SCREEN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
ENDIF.
Any help or suggestions would be great.
Thanks,
NaingDear Naing,
I execute the same code
IF ls_ekpo IS INITIAL.
GET PARAMETER ID 'VRT' FIELD LS_EKPO.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
ENDIF.
And it is working.
Try to do de simple sintax.
A program with one pararmeter to introduce the contract number.
The set parameter for this parameter and the call transaction.
I´m waiting your comments.
Regards.
Antonio. -
How to call a Jclient form from another project?
In my workspace, there are three projects. One is for business components. The other two are Jclient forms applications. Can I open a Jclient form from another Jclient form in another project?
I used to create multi_form accounting application using Oracle Form Builder in which I can call a form from another form.Just set one project to be dependant on another in the project settings dialog of the former. This should work.
-
Sapscript calling forms from program
Hi experts
I need to write a form in a program to get values.
Here is my code. But i cant seem to succesfully compile it. Need help. I want to take
ernam from sapscript and send name and lastname back. Can u please fill the function.
Also i have an error says itcyy is not a structure ?
thanks.
REPORT ZME23N_SAPSCR_FM.
tables : user_Addr.
form get_Values TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
*READ TABLE IN_PAR WITH KEY 'ERNAM'.
*data firstname like user_addr-name_first.
*select single * from user_Addr
*where bname = ernam.
*firstname = user_Addr-name_first.
*lastname = user_addr-name_last.
endform.You can use the PERFORM command to call an ABAP subroutine
(form) from
any program, subject to the normal ABAP runtime
authorization
checking. You can use such calls to subroutines for
carrying out
calculations, for obtaining data from the database that is
needed at
display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed
when a
document is formatted for display or printing.
Communication between a
subroutine that you call and the document is by way of
symbols whose
values are set in the subroutine.
The system does not execute the PERFORM command within
SAPscript
replace modules, such as TEXT_SYMBOL_REPLACE or
TEXT_INCLUDE_REPLACE.
The replace modules can only replace symbol values or
resolve include
texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of
the four
SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must
therefore be
character strings.
The ABAP subroutine called via the command line stated
above must be
defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING...
are now
stored in the internal table IN_TAB . Note that the system
passes the
values as character string to the subroutine, since the
field Feld
VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR
80). See the
example below on how to access the variables.
The internal table OUT_TAB contains names and values of the
CHANGING
parameters in the PERFORM statement. These parameters are
local text
symbols, that is, character fields. See the example below
on how to
return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in
the ABAP
program QCJPERFO is called. Then the simple barcode
contained there
('First page', 'Next page', 'Last page') is printed as
local variable
symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY 'PAGE'.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY 'NEXTPAGE'.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY 'BARCODE'.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = '|'. "First page
ELSE.
OUT_PAR-VALUE = '||'. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = 'L'. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM. -
Checking whether field-symbol from another program is assigned?
Hi all
I'm attempting to access a FS from another program.
As the FS can be assigned, or unassigned within that program, how do I checked for that in my calling program?
e.g. calling program;
FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE.
DATA: lv_var(40) type c.
lv_var = '(ZTGT_PROG)<read_fs>'.
ASSIGN (lv_var) TO <fs>. " statement might dump...Hi
Go through this doc and use accordingly
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji
Maybe you are looking for
-
Process: Safari [79238] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.1 (6534.51.22) Build Info: WebBrowser-75345122~2 Code Type: X86-64 (Native) Parent Proce
-
Safari quits unexpectedly only when I access my Twitter account
Safari kicks me off as soon as I sign into Twitter leaving me no time use it or delete it. This is what pops up: Process: Safari [3302] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version:
-
How to delete the log of sender Addresses in Mail?
When I am sending an Email with iPhone 4, and I start tipping the address I want to send, it starts to list used addresses in order to autofill. But some of those I want to delete. How can I do that? Even, if I had to erase all, would be fine but HOW
-
How much storage units can be added in the single bin.
Hi all, Can anybody tell me how much storage units can be added in the single bin. Dev
-
Hello Guys! I have issue here, there is difference file loaded while i regenrate the XML with addtional technical usage. How will i knows which files are added today while i regenrate the XML, so that i can download those files instead of downloading