CALL TRANSACTION 'ME33K from another program

Hi,
I ma trying to CALL TRANSACTION 'ME33K from another program, but it is not working. The transactions is opening, but it is not opening with the contract number (ls_ekpo-ebeln) i am passing.
ls_ekpo-ebeln does have a valued when CALL TRANSACTION 'ME33K is called.
In debug, I noticed the "value" is blank when step into CALL TRANSACTION 'ME33K .
   WHEN 'EBELN'. "Contract
      l_field = 'EVRTN'.
     IF ls_ekpo-ebeln <> ''.
        GET PARAMETER ID 'VRT' FIELD l_field. "EVRTN.
       SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
       CALL TRANSACTION 'ME33K AND SKIP FIRST SCREEN.
        SET PARAMETER ID 'VRT' FIELD ls_ekpo-ebeln.
      ENDIF.
Any help or suggestions would be great.
Thanks,
Naing

Dear Naing,
I execute the same code
IF ls_ekpo IS INITIAL.
GET PARAMETER ID 'VRT' FIELD LS_EKPO.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
SET PARAMETER ID 'VRT' FIELD ls_ekpo.
ENDIF.
And it is working.
Try to do de simple sintax.
A program with one pararmeter to introduce the contract number.
The set parameter for this parameter and the call transaction.
I´m waiting your comments.
Regards.
Antonio.

Similar Messages

Call transaction MMBE from another program and press Back button

Hello,
I have program that is used as a 'launch pad' for some of our heavily used transactions. When I call the main 'launch pad' program, the user will select a button and a Call Transaction MMBE is initiated (USING the first screen). The user selects a material for display and presses the execute button (F8). The material overview is displayed correctly. When the user presses the Back button (F12), transaction returns all the way back to the first called program and not to the first screen for transaction MMBE as expected.
Does anyone know how I can change the screen flow and go back to the fist screen of MMBE and not the screen of the first called program?
Regards,
RC

Rod,
In your case i think it is not possible as it is standard functionality by SAP.
Try work around, may be modification to the program will work.
Regards,
Amey

Call transaction LM05 from Z program

Hi,
I need to call transaction LM05 from a Z program, and when LM05 finishes then continue with the process in Z program. But when i use CALL TRANSACTION 'LM05' the process does not return to program Z, when LM05 finishes,it returns to main screen of 'LM05' but not Z program.
I change CALL TRANSACTION by SUBMIT zrlmob001 AND RETURN, but it happens the same, because transaction 'LM05' continuosly evaluates the system variable SY-TCODE, and therefore SY-TCODE contains code transaction 'ZXX'.
it exists a way to call a LM05 transaction from Z program, and then continue in z program after LM05 finishes?
can i create a user exit screen for transaction LM05 and use the user exit to continue with the process that i wish in Z program after call transaction 'LM05'?
I'm in SAP version ECC 6.0.
Thanks in advance
Alejandro

Hi,
I want to share how i resolved this topic:
I searched for user exit, badi and did'nt find a correct way to solved this issue. Also, i tried to create a screen exit for transaction LM05, but the dynpro 2100 of program SAPLLMOB is used for transaction LM02, LM03, LM05 and for each one show a diferent initial screen, this logic cannot be suplied with my custom screen.
Finally, how the final option, i used a enhancement implementation to add code in SAP standard program RLMOB001, and the problem was resolved. i am in version SAP ECC6.0, in this version is posible to create enhancement implementation, and for support package and upgrade, SAP will not overwrite your custom code.
Regards,
Alejandro.

Calling a report from another program

Hi friends,
I want to run an existing report from one function module and I need the output in an internal table for further processing.But I don't want to change the called program for any export to memory.How can we do it ?
Thanks in advance,
Joby

Hi,
U can do by using
SUBMIT PROGRAM VIA SELECTION-SCREEN .
Bye

Error when calling a form from another program

Hi all,
I'm using the following code in EXIT_SAPLV50Q_001:
PERFORM STATIC_CREDIT_CHECK(SAPLVKMP)
USING '' LIKP-KKBER LIKP-KNKLI '' 'X'
CHANGING RC_CHECK_A RC_CHECK_F RC_WARNING RC_ERROR RC_STATUS_SET CMPSA
I'm getting the following error:
GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned in line LOCAL: XVBKD-PRSDT which is in FORM MESSAGE_EXCEEDED_VALUE.
I have assigned a value for field XVBKD-PRSDT so it won't be initial, but this was not helpful.
Any ideas would be appreciated.
Hagit

Hi guest,
the data definition is:
DATA: XVBKD LIKE VBKDVB OCCURS 0 WITH HEADER LINE.
the assignment:
XVBKD-PRSDT = likp-erdat.
Thanks,
Hagit

Call transaction ME33K

Dear Abapers,
I have a problem when calling transaction ME33K from a custom program I develop. I know that we can pass agreement number using SAP memory with parameter ID = 'VRT'.
This is the code to call transaction
      SET PARAMETER ID 'VRT' FIELD agreement_num.
      CALL TRANSACTION 'ME33K' AND SKIP FIRST SCREEN.
agreement_num is filled with agreeement number.
Before that I did same things to call ME23N and it works well.
Definitely I use same formula:
      SET PARAMETER ID 'BES' FIELD po_num.
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
po_num is filled with PO number.
Could anybody help explain to me why this thing happened. Are there other any possible solution to call ME33K?
Thanks
Regards
Hadi

Hi Kranthi,
Thank you for your answer.I was having the same problem but now It is ok.
Thank you I appreciate yout help too.
Regrards
William

How to call an alv report from another program and return back

     Hello ,
I am calling one abap program (Prgm B) from another program (Prgrm A).
Here, Prgm B is an ALV report. I have fetch some data from Prgem B that gets stored in an internal table.
Now, I am using below code in Prgrm A,
SUBMIT Prgrm B VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      EXPORTING LIST TO MEMORY
                      AND RETURN.
When Prgrm A executed, it lead me to selection screen of Prgrm B and when I click F8, it shows me the report output, In short, it doesnt return back to Prgrm A. It ends up showing me the alv report if Prgrm B even afetr using RETURN statement.
I want to get back to Prgrm A by fetching some data from Prgrm B.
Please let me know, if i am missing something.
Regards,
Seema

Hi Seema,
Refer below code.
DATA: v_matnr LIKE mara-matnr.
DATA: t_listobject TYPE abaplist OCCURS 0 WITH HEADER LINE.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_ascilist OCCURS 0,
         line(200).
DATA: END OF t_ascilist.
data var(3) type c.
SELECT-OPTIONS: s_matnr FOR v_matnr.
var = ' 3'.
START-OF-SELECTION.
   SUBMIT ztestaks1 WITH s_matnr IN s_matnr EXPORTING LIST TO MEMORY
   AND RETURN.
   CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
             listobject = t_listobject
        EXCEPTIONS
             not_found = 1
             OTHERS     = 2.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ELSE.
     CALL FUNCTION 'LIST_TO_ASCI'
*     EXPORTING
*       LIST_INDEX               = -1
*       WITH_LINE_BREAK          = ' '
       TABLES
         listasci                 = t_ascilist
         listobject               = t_listobject
       EXCEPTIONS
         empty_list               = 1
         list_index_invalid       = 2
         OTHERS                   = 3.
     IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
     ELSE.
       WRITE:/ 'Below are the lines from the submitted program.'.
       LOOP AT t_ascilist.
         WRITE:/ t_ascilist-line.
       ENDLOOP.
       SKIP 2.
     ENDIF.
   ENDIF.
   IMPORT t_mara FROM MEMORY ID 'T_MARA'.
   WRITE:/
'Here is the output from the table exported from the submitted program.'
   LOOP AT t_mara.
     WRITE:/ t_mara-matnr.
   ENDLOOP.
Submitted program
REPORT ZTESTAKS1.
DATA: v_matnr LIKE mara-matnr,
       v_maktx LIKE makt-maktx.
DATA: t_mara TYPE mara OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_makt OCCURS 0,
         matnr LIKE makt-matnr.
DATA: END OF t_makt.
SELECT-OPTIONS: s_matnr FOR v_matnr,
                 s_maktx FOR v_maktx.
START-OF-SELECTION.
   SELECT matnr INTO TABLE t_makt
                FROM makt
               WHERE matnr IN s_matnr
                 AND maktx IN s_maktx.
if not t_makt[] is initial.
   SELECT * FROM mara
            INTO TABLE t_mara FOR ALL ENTRIES IN t_makt
           WHERE matnr = t_makt-matnr.
endif.
   EXPORT t_mara TO MEMORY ID 'T_MARA'.
   WRITE:/ 'This list is from the submitted program'.
   SKIP 1.
   LOOP AT t_mara.
     WRITE:/ t_mara-mtart.
   ENDLOOP.
Hopes this helps you.
Thanks,
Ashok.

Problem regarding calling a program from another program

Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumik

Submitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND           "Warehouse number/complex
        vbeln = w_screen1000-io_vbeln.      "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr        TYPE st_iblnr,
*     Define internal table and work area for select-options
        l_selection    TYPE rsparams,
        li_selection   TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
    CLEAR l_selection.
    l_selection-selname = 'IM_IBLNR'.    "Option name
    l_selection-kind     = 'S'.           "S= select options P=Parameters
    l_selection-sign     = 'I'.           "Sign
    l_selection-option   = 'EQ'.          "Option
    l_selection-low      = l_iblnr-iblnr. "Value
    APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas

Query about Calling One Form from Another using Personalization

Hi All,
I have created a Custom form using TEMPLATE.fmb and created functions in Apps and assigned to Responsibility etc and it all works OK.
Now, I need to call this Custom form from another seeded(PO form) Via Tools -> Menu.
using Forms personalization I can get the Menu Entry and Actions to execute the Form successfully from the PO Form.
BUT, I need it to automatically query records in my CUSTOM form based on my current PO_HEADER_ID value on my PO Form.
How can I do it ?
Do I need to modify my Block and add some parameters and then pass a value via Personalization ?
Please help !
Thanks
Shankar

Hi Shankar,
Please refer my article on metalink
Zoom to AR Transactions and AR Receipts Form from Collections Form using Forms Personalization - Doc ID: 430643.1
This article explains how to open the AR transactions form from another form. When it opens the form it automatically queries for the Invoice number of the calling form. You should be able to use this logic for your requirement.
Hope this helps.
Thanks,
Anil

Set the parameter in the selection screen of a program from another program

Hi ALL,
I need to call the program RHALESMD from another program and the program RHALESMD takes from date as one of the input parameter.how do i set the from date from the calling program and call RHALESMD
Thanks
Bala Duvvuri

i got the answer
Program accessed
REPORT report1.
DATA text TYPE c LENGTH 10.
SELECTION-SCREEN BEGIN OF SCREEN 1100.
SELECT-OPTIONS: selcrit1 FOR text,
                  selcrit2 FOR text.
SELECTION-SCREEN END OF SCREEN 1100.
Calling program
REPORT report2.
DATA: text       TYPE c LENGTH 10,
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
      range_tab LIKE RANGE OF text,
      range_line LIKE LINE OF range_tab.
rspar_line-selname = 'SELCRIT1'.
rspar_line-kind    = 'S'.
rspar_line-sign    = 'I'.
rspar_line-option = 'EQ'.
rspar_line-low     = 'ABAP'.
APPEND rspar_line TO rspar_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'H'.
APPEND range_line TO range_tab.
range_line-sign   = 'E'.
range_line-option = 'EQ'.
range_line-low    = 'K'.
APPEND range_line TO range_tab.
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Thanks
Bala Duvvuri

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Regarding calling 1 report from another

Hello Friends,
   Can u plz tell me how to call one report from another report.
Regards,
Drashana

hi,
Use SUBMIT program statement
SUBMIT ZFIR001
chk this.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
\[removed by moderator\]
rEGARDS
Edited by: Jan Stallkamp on Jul 29, 2008 5:25 PM

Can we call a BDC from REPORT program.

hi
can anybody tell me that
can we call a BDC from REPORT program.
thanks&regards

Yes, It can be called.
Infact you can generate a program from SHDB recording and in the program generated you can put necessary report logic and call the BDC/CALL TRANSACTION as required.
<b>Please check here for a sample program,</b>
http://www.sapdevelopment.co.uk/bdc/bdc_ctcode.htm
Regards
Kathirvel

Checking whether field-symbol from another program is assigned?

Hi all
I'm attempting to access a FS from another program.
As the FS can be assigned, or unassigned within that program, how do I checked for that in my calling program?
e.g. calling program;
FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE.
DATA: lv_var(40) type c.
lv_var = '(ZTGT_PROG)<read_fs>'.
ASSIGN (lv_var) TO <fs>. " statement might dump...

Hi
Go through this doc and use accordingly
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

Probe in calling tabstriped screen from another screen ..

hi
could any one please help me ,,,that what is the logic for calling tabstriped screen from another screen ..
Thanks N Regards
Priya

Hi,
Jonathan.
Thanks for the response ...
I did execute with call screen statement ...(CALL SCREEN 0123). ..when i excute the program its working fine ,but the same programe when I execute with the T.CODE ...its giving erorr ...
ERORR:Program " ZTEST "tried to use screen 000.
        the screen doesn't exist.
HERE IS CODE.
let me know where is the mistake ..
could you please , help me ,,what i suppose to do .
let me know where is the mistake ..
REPORT ZTEST .
DATA: DATE LIKE SY-DATUM,
       TIME LIKE sy-uzeit.
DATA number TYPE sy-dynnr.
CONTROLS tabstrip TYPE TABSTRIP.
tabstrip-activetab = 'TAB1'.
number = '1003'.
tabstrip-activetab = 'TAB2'.
number = '1004'.
CALL SCREEN 1000.
*&      Module STATUS_1000 OUTPUT
      text
MODULE STATUS_1000 OUTPUT.
CASE : SY-UCOMM.
    WHEN 'ENTER'.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'MOD'.
          DATE = DATE.
          TIME = time.
          SCREEN-INPUT = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1000 OUTPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE USER_COMMAND_1000 INPUT.
CASE SY-UCOMM.
    WHEN 'ENTER'.
      LEAVE TO SCREEN 1001.
endcase.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE USER_COMMAND_1001 INPUT.
CASE SY-UCOMM.
        WHEN 'button1'.
        CALL SCREEN 1002.
    ENDCASE.
    ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE USER_COMMAND_1002 INPUT.
    CASE sy-ucomm.
      WHEN 'TAB1'.
        number = '1003'.
      WHEN 'TAB2'.
        number = '1004'.
    ENDCASE.
    ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module STATUS_1002 OUTPUT
      text
MODULE STATUS_1002 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_1002 OUTPUT
Thanks N Regards.
Priya.

CALL TRANSACTION 'ME33K from another program

Similar Messages

Maybe you are looking for