Calling MRP screen of material by using report

The requirement is that when I click material on report, MRP view (From MM02 transaction code) will be opened for that material.

Hi,
Use this :
set parameter id 'MAT' field <material code>.
call transaction 'MM02' and skip first screen.
Hope this will help you
Regards,
Moon

Similar Messages

  • How to run MRP for Bulk Material without using LTP

    Hi, how can I run MRP for BULK material without using LTP.
    Thanks in advance
    BK

    Hi,
    Use trasnsaction code OPPQ and goto BOM Explosion and selection depends on
    Field selected
    No dependent requirements are created for informational purposes for bulk material items in the plant selected. This can improve system performance.
    Field not selected
    Dependent requirements are created for bulk material items in the plant selected. These dependent requirements are displayed in the planned order for informational purposes only. They are not considered in the net requirements calculation; that is, they are not included in material requirements planning (MRP) and are not displayed in the stock/requirements list
    Reg,
    Deepak.
    Edited by: deepak k b on Nov 11, 2008 6:56 AM

  • Calling 'Status' screen of transaction IW32 from report

    Hi,
    I want to display 'status overview' screen from transaction 'iw32' .
    I know how to call transaction 'iw32', but I don't know how can
    I directly go on status screen? I have order no with me.
    Can anyone help me?

    Hi,
    You can get the user status data directly from the following tables:
    Pass on the order number to JEST table to fetch the STAT (status) for which INACT field is a blank (means status those are active in the order). You will find the status in the form of E001 or I001 depending upon the user status or system status respectively.
    Now goto TJ30T table where you need to pass the status profile (STSMA) which can recovered from the order number and fetch the status text by comparaing ESTAT with the status received from JEST table. Field TXT04 in TJ30T gives the status text.
    Hope you will find this helpfull.

  • How to Call another screen using the ABAP Report which is displaying ALV ou

    Hello All,
    I am developing a ABAP report in which I want to transfer the stock from material to another material.
    My Report will include 3 to screens.
    The first sleection screen will display all the material with their stock value.
    When we execute the report I will get the list of materials along with their current stock. On the top of the output screen I want the Execute button. Also , each line of the output should have checkbox or the ALV provides the functionality of editing one cell like that.....Once the user tick the checkbox or the cell....then I want to move to another screen where user can enter the Quantity and then user will tick ok and then I will call one function module so that the material documnet is posted and transfer of posting form material to material is done successfully.
    Could anyone please help me out how to call another screen from the output screen where user can enter the Quantity amount....
    I dont want to use the Dialog programming.....I want to create the simple ALV Abap report.
    Regards,
    Komal Bhutada.

    Hi Raymond,
    Thanks for the input...I will try this in my code .....
    Can you please help me how to insert the checkbox in the ALV Output....so that I can select one of row and then press execute to process further?..
    Thanks for the information.
    Regards,
    Komal.

  • Creating a screen in report program and calling that screen in program.

    Hi,
    I have a report program and I want to give output in different screen.
    can any one tell me how to create a screen in executable program and calling that screen in program in END-OF-SELECTION for displaying results.
    Thanks a lot.
    Kiran

    Hi,
      Open your program in SE80. Right click on your program. Click CREATE->Screen menu. This will allow you to create screen for the program. 
    In the End-of-selection event call the screen using the  commands CALL SCREEN or LEAVE TO SCREEN or SET SCREEN.
    CALL SCREEN
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dba4e635c111d1829f0000e829fbfe/content.htm
    LEAVE SCREEN/SET SCREEN
    http://help.sap.com/saphelp_47x200/helpdata/en/9f/dbab3635c111d1829f0000e829fbfe/content.htm
    Regards,
    Vara

  • F4 help on a field on selection-screen called using call selectionn-screen

    Hi,
    I am calling a selection-screen at runtime using call selection-screen 123.
    Now in this selection screen I am taking a parameter thead-tdid as a parameter.
    Could anyone tell me how to get the f4 help for this parameter.
    Please lemme know..
    Thanks in advance..

    Hi arup,
    1. sample code (just copy paste)
    2.
    REPORT ABC.
    DATA : BEGIN OF ITAB OCCURS 0,
    UNAME LIKE USR01-BNAME,
    END OF ITAB.
    data : RETURN_TAB LIKE DDSHRETVAL occurs 0 .
    data : RETURN_wa LIKE DDSHRETVAL .
    PARAMETERS : A(12) TYPE C.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR A.
    ITAB-UNAME = 'U01'. APPEND ITAB.
    ITAB-UNAME = 'U02'. APPEND ITAB.
    ITAB-UNAME = 'U03'. APPEND ITAB.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE = ' '
    retfield = 'ITAB-UNAME'
    PVALKEY = ' '
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'A'
    STEPL = 0
    WINDOW_TITLE =
    VALUE = ' '
    VALUE_ORG = 'S'
    MULTIPLE_CHOICE = ' '
    DISPLAY = ' '
    CALLBACK_PROGRAM = ' '
    CALLBACK_FORM = ' '
    MARK_TAB =
    IMPORTING
    USER_RESET =
    tables
    value_tab = ITAB
    FIELD_TAB = FTAB
    RETURN_TAB = return_tab
    DYNPFLD_MAPPING =
    EXCEPTIONS
    PARAMETER_ERROR = 1
    NO_VALUES_FOUND = 2
    OTHERS = 3
    break-point.
    regards,
    amit m.

  • Call a Screen from A selection screen report

    Hi Friends,
       I developed a report (1. Excecutable) and i am calling a screen say 9000 which is having several subscreens. While i am clicking the BACK button it should come to the same selection screen report. How to do this? We can't use LEAVE SCREEN or LEAVE TO SCREEN 0. Because 9000 screen having the subscreen. If i use LEAVE PROGRAM it won't come to selection screen. Instead it will come out of program.
    Please help me.
    Thanks and regards
    Srikanth. S

    hi srikanth,
                    We can come from screen to selection screen of the report by using -- "LEAVE TO LIST PROCESSING".
    If u need some more info plz check below.
    https://www.sdn.sap.com/irj/sdn/forums
    https://www.sdn.sap.com/irj/sdn/forums
    https://www.sdn.sap.com/irj/sdn/forums
    Reward if it is usful,
    Thanks,
    Srikanth.A

  • Short dump while using call selection-screen mdynnr

    Hi ALL,
    I need your help and information.
    In programmes, We are using the statament " CALL SELECTION-SCREEN MDYNNR " 
    and passing the screens dynamically into variable mdynnr.
    And the programme is going to dump after executing 50 times.
    When we
    can we use any other statement instead of CALL SELECTION-SCREEN MDYNNR.
    Your information helps us lot.
    Thanks in advance.
    Srinivasa Reddy.

    Hi,
    As you know Call Screen is the statement, but you will get the problem if you are going to call it in the same LUW repeatedly. So, FM is the only convenient way to do it. This is very easy. Just create a FM and replace you statement with this FM. Hopefully this will solve your problem.
    Check this comment " When you call a new main program in order to use a screen sequence (for example, using CALL TRANSACTION), a new SAP LUW begins. This may be an undesired effect, especially when you are trying to modularize a transaction that updates the database.
    An alternative to this is to use an external procedure, whose main program is linked to a screen sequence, and which contains the corresponding dialog modules. Procedures run in the same SAP LUW and internal session as their calling program."
    Thanks,

  • In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.

    In Material Master Screen,functionally what is Mixed MRP in the MRP Screen.Pls explain its functionality

    THis indicator will define whether the material is available for the following....
    Subassembly planning with final assembly
    Gross requirements planning
    Subassembly planning without final assembly

  • HT1245 Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s.

    Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.

    I am also having this issue.
    I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
    I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
    I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
    If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience!

  • Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear  to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

    Iam using Iphone4,my problem is while imake a call or when ia attend a incoming call,the screen doesnt lock,while i kept in my ear  to attend a call it automatically gets inside keypad or it on hold tab this makes me uncomfortable pls give a solution

    This sometimes happens if you have a case or screen protector on the phone.  IF you have one of these remove it and see if it makes any difference

  • Item      Seller      Type      Unit Price iBlacklist - Block Unwanted Calls, v1.0 (4 ) Write a Review Report a Problem      Max Kub      App      $4.99 but show other application"secret contact" on screen .can't block any contact

    Item
    Seller
    Type
    Unit Price iBlacklist - Block Unwanted Calls, v1.0 (4 ) Write a Review Report a Problem
    Max Kub
    App
    $4.99
    but show other application"secret contact" on screen .can't block any contact. so seems tyhat i order one aplication "iBlacklist - Block Unwanted Calls, v1.0 (4 )" but get another application "secret contact "as it appear on screen ????

    Reply to n82phone:
    what you are telling i think is too much. I've read your requests and believe me some of them is out of context. One example is listening to radio while being on a call. Who would like to have such options?? It's ridiculous.
    But But it doesn't mean all of them are ridiculous! Just like the #1 concerning music, #4 concerning the camera and #5 concerning the volume, I strongly agree with you as it makes sense!
    So if I was to write to nokia, which I will do in the coming days is to write them again:
    Points #1,4,5,9,11,14,15,24! These are strong points!
    People out there, if you want the changes I specified to be done by nokia, you should write them the same points. If only one or two write, it's useless, they won't take it as a priority.
    Of course, don't copy paste or they will think the same person is spamming them. I hope it's clear. Write in your own words. Don't think changes will be done by magic or by doing nothing with arms folded. You should do a move.
    THIS IS A USER TO USER FORUM. YOU CAN POST YOUR PROBLEM HERE. WE'LL DISCUSS ABOUT IT, THEN ALL OF US SHOULD WRITE NOKIA TO CORRECT THE MATTER IF IT CONCERNS FIRMWARE. FOLLOW THE LINK "CONTACT US > CALL OR EMAIL NOKIA CARE" TO REPORT THE PROBLEM TO NOKIA.
    Thank you
    Message Edited by fafanne on 18-Oct-2008 01:51 AM

  • When i am using my iphone 4 for calls the screen doesnt go blank so i keep cutting my calls off how can i resolve this ?

    when i am using my iphone 4 for calls the screen doesnt go blank so i keep cutting my calls off how can i resolve this ?

    Try removing your case... it might be interferring with the proximity sensor.

  • I am using Iphone 5. Since the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal

    I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
    I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
    Can anyone share any info on it?

    I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and  friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.

  • How to Display  'purchase order text' in MM03 using report program

    Hi Friends,
    Can anybody suggest me how to display 'purchase order text' in MM03 using report program.
    'Purchase order text' tab displays purchase long text of particular material .
    I coded as:
          SET PARAMETER ID 'MXX' FIELD 'E'.
          SET PARAMETER ID 'MAT' FIELD k_final-matnr.
          SET PARAMETER ID 'WRK' FIELD k_final-werks.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
    It displays Purchasing tab other than Purchase Order Text tab of MM03.
    Please suggest me how can i solve this.
    Is there any parameter id to set values for Purchase Order text tab

    >
    Madhu Mano Chitra wrote:
    > I want how to navigate to MM03 'Purchase Order text'  tab/ view using ABAP code.
    > could any suggest me
    You can call a transaction and pass it a BDC table that tells it where you want it to go.  You have to work out for yourself what to put into the BDC table.  The code below works for tcode CATSSHOW.
    DATA: bdcdata_wa  TYPE bdcdata,
          bdcdata_tab TYPE TABLE OF bdcdata.
    DATA opt TYPE ctu_params.
       CLEAR bdcdata_wa.
        bdcdata_wa-program  = 'CATSSHOW'.
        bdcdata_wa-dynpro   = '1000'.
        bdcdata_wa-dynbegin = 'X'.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'SO_STATU-LOW'.
        bdcdata_wa-fval = '20'.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'ANDZEIT'.
        bdcdata_wa-fval = SPACE.
        APPEND bdcdata_wa TO bdcdata_tab.
        CLEAR bdcdata_wa.
        bdcdata_wa-fnam = 'PAST'.
        bdcdata_wa-fval = 'X'.
        APPEND bdcdata_wa TO bdcdata_tab.
        IF p_selscr = SPACE.
           CLEAR bdcdata_wa.
           bdcdata_wa-fnam = 'BDC_OKCODE'.
           bdcdata_wa-fval = '=ONLI'.
           APPEND bdcdata_wa TO bdcdata_tab.
        ENDIF.
        opt-dismode = 'E'.
        opt-defsize = 'X'.
    CALL TRANSACTION 'CAPP' USING bdcdata_tab OPTIONS FROM opt.

Maybe you are looking for