Calling report using parameters

Dear experts,
I have seven reports objects.I am willling to club them into a single screen.
Selection parameters in these reports are more or less same.Little bit variation is there.
Is it possible that i club complete input parameters on single screen and present these parameters
to user and then call various transactions selected by radio buttons on basis of what user give in these selection parameters. Is there something of that sort in call transaction or SUBMIT.
I could see help but could not conclude how ?
Thanx in advance.

Hi
You can use Call Transaction for each report using:
CALL TRANSACTION tcod [AND SKIP FIRST SCREEN] [USING itab].
At the end of the Call, it returns to calling program and proceeds to next stmt.
Also if you want to use Submit:
[Submit|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/db9dd035c111d1829f0000e829fbfe/content.htm]
Also check out the code at: [Filling the Selection Screen of a Called Program|http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm]
Hope this helps
Regards,
Jayanthi.K

Similar Messages

Link two reports using parameters

Hi,
We are using business object XI.
I am trying to link two reports using parameters. I cannot use subreport option becuase inside the subreport I should link another report too. So,
Report 1(High level summary)
Report 2(Middle level summary)
Report 3(Detail level)
I tried to use hyperlink option and used following string.
http://<server_name>/<Virtual Directory>/object.rpt?prompt0={?param1}&prompt1={?param2}
Here is my question.
1. Server name: Does it include port number??
2. Virtual Directory: I am absolutely lost. I tried the "frsinput" directory the actual rpt file is storing. It is not working.
Do you have general path??
3. Parameters: I have 5 parameters to pass. 3 of them are Strings and the rest are DateTime.
Basically, I need any tutorial about this kinds of things. The tutorial I have got only discribe link like "www.yahoo.com"
BTW, is this even possible solution??

Hi,
I am trying to link two reports in the crystal report designer->deploy to the server->show in the DHTML viewer.
When I create a URL from report A, it looks like "&" disapears. For example, I created a hyper link from report A using formula,
http://server:port/........openDocument.jsp?sDocName=reportB&sType=rpt&paramName1="Trim(ToText({?param1},"#####"))"&paramName2="+Trim(ToText ({?param2},"#######"))
But when I see the actual URL, all the "&" disappears so it looks like
http://server:port/........openDocument.jsp?sDocName=reportBsType=rptparamName1="Trim(ToText({?param1},"#####"))"paramName2="+Trim(ToText ({?param2},"#######"))
No wonder it is not working.
I guess I need special protection for "&" sign. Do you know any?

Call report using URL incl. parameter

Hello,
i´m the CRM-expert in our company and i have not much experience with BW.
We have in BW a report which shows information for one customer. The customer number is the selection criteria.
Now i have the idea to open this BW-report from CRM 7.0 webclient UI - customer overview.
It´s possible for me to open a URL from CRM Webclient UI. But i have no idea if BW allows to use parameters (customer-id) within the URL and how to URL has to look like?
Thank you very much for your hinds.
Best regards
Manfred

Hello Manfred,
I think this link can be usefull to you: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/ef05462480025ae10000000a1553f7/content.htm
With the correct definition of the URL you should be able to call the BW report from CRM. Maybe an SSO certificate will be needed to prevent an additional login to the BW syste,
Best regards
Yannick

Calling report user parameters from forms

If I run the report from report builder, it will prompt me the user parameters for input, however if I create a mouse click trigger in a form to call the report, the parameters won't prompt, how can I make it prompt ?
I want to create a text field on the form for user to input the user parameter values.
thanks.

create a text-field or drop-down or what ever object that you want to in the form ...
and then use run_report_object to run the report by passing parameters from your form (from the text field or drop-down) to the report..

Htmlcss Problem in calling Report using Forms 6i

Hi
My form6i server is on win2000 server.
I am calling Reports(Report6i) using forms 6i, my problem is when html report get generated in a IE browser, cell border AND background color are not coming, i tried desformat property set as htmlcss even tho i not get proper output. i only get report without borders.
Q1 ) My quetion is how i can get web html report with cell background and cell border using Report6i calling from forms 6i.
Q2 ) MY forms 6i service always get hagged after 2..3 hr, when restart it, i get my form in a browser. but again after some time my service get in some invalid state, how i can solve this problem.
thanks
sudarshan s vatturkar

Sudarshan,
Q1 ) My quetion is how i can get web html report with cell background and cell border using Report6i calling from forms 6i.
Reports6i does not support cell background colors in html format. Htmlcss in Reports does render table borders, but it does so in the color that is assigned to teh table in teh building environment
Q2 ) MY forms 6i service always get hagged after 2..3 hr, when restart it, i get my form in a browser. but again after some time my service get in some invalid state, how i can solve this problem.
This is hard to answer via the forum as it may have platform dependencies. If this is a serious issue then I recommend consulting Oracle customer support.

Calling report using Mapping File with user parameters

Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

Please provide an example of Key mapping file that provides user parameters to an Oracle Reports report, where paramform=no.
I call an Oracle Reports report via APEX, and can't get the URL to work. If I don't use the mapping file, the call works. But I can't seem to get it to work using the mapping file to hide all the other params like userid etc.

Is it possible to sort report using parameters?

Hi,
I am building a report - which generates select query based on the parameters entered by the user.
Could you help me with how to sort output with the parameter chosen by the user himself? Thanks,

I will give you 2 answers since I am not sure exactly how your report runs.
Lets say your users choose a couple parameters to limit certain columns by in your where clause. In this case, you would want to just create a user parameter, and use that parameter in the where clause.
select col
from table
where job_id = :P_JOB_ID and
start_date between :P_START_DATE and :P_END_DATEPretty simple. Now here is how I would do it if those are optional parameters, and the user could enter a value, or could leave all blank.
select col
from table
where job_id = nvl(:P_JOB_ID, job_id) and
start_date between nvl(:P_START_DATE, start_date) and
nvl(:P_END_DATE, end_date)If its null, it will set the column equal to each other, and will return all the rows (good little trick).
The other case is if you need a different select/where clause entirely based on what the user sends in. For example, lets say you have 2 entirely different queries based on a certain parameter. Then you'd want to use lexical parameters and an after parameter trigger.
I think you are looking for the first scenario, so try that and post back if you are looking for something different

Cache issue in Reports using Parameters

Hi,
I have a Report which uses multiple Regions to show conditionally based on the Parameters selected.
e.g. PARAM1, PARAM2, PARAM3
(1)PARAM1,null,null - Selected : Shows Region : 1,2,3
(2)PARAM1, PARAM2, null- Selected : Shows Region : 1,4,5,6
(3)PARAM1, PARAM2, PARAM3 - Selected : Shows Region 1,7,8
After I get Report based on (1). And then go back & select (2). It works fine. But when I go back & select (1) again, it still shows the Regions displayed based on the (2).
Is it a Cache Issue ?
Please advise
Thanks
Sandeep

hey sandeep--
if i'm understanding you correctly, this does indeed sound like a cache issue. based on what i'm thinking is your expected behavior, it sounds as if you're forgetting to clear the cache for your other PARAM items when a value is selected from one of your PARAM items that, from a logical perspective, comes before it. so to use your example...
After I get Report based on (1). And then go back & select (2). It works fine. But when I go back & select (1) again, it still shows the Regions displayed based on the (2).
...i'd say you'd want to add a process to your page that fires after submit and clears the cache for PARAM2 when the value of :REQUEST = 'PARAM1'.
hope this helps,
raj
ps-if i've misunderstood your issue, please explain it in more detail.

From forms6i i have to call report in excel format

Hi,
I have prepared a form in that i have called report using parameters and
i should print this report in excel format,so pls help me with coding
Thanks and regards

Hi,
You can use rep2excel utility for this. Download it from www.lv2000.com ,please find the complete link below. The software also has a code pack which demonstrates how to use it within your oracle report.
http://www.lv2000.com/rx/rep2excel.htm
Cheers!!

Run_Report_Object -- Calling report from Form

Hello:
Where can I find a technical notes on VALID combination of system parameters in calling report using run_report_object from FORMS in 10G?
Not sure what are valid values and combinations. Do we HAVE to pass a REPORT SERVER along with run_report_object? what formats are valid along with destype etc?
Thanks

http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

Error calling Report and unable to bind Report Server

Hi,
I use Oracle Database 10g with Oracle Developer 10.1.2, in Windows 2000.
I don't have nor use Oracle Application Server though.
I tried to call a report from a Form, using Run_Report_Object.
But the following error appeared.
Error FRM-41213 Unable to connect to Report Server rep_<computer_name>
I also tried to call a report, using Web.Show_Document.
It launch another web browser, but the following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
Based on the white paper of Oracle Application Server 10g - Integrating Oracle Reports in Oracle Forms Services applications.
I create my own report server using following command
rwserver server=repsrv.
Another java-based windows showed up. It shows that the server 'repsrv' is ready.
I do the following:
1. Navigate to http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
But there is no other window popup (The white paper stated that a 'in process' server
should be invoked when starting a report for the first time).
2. Navigate to http://localhost:8889/reports/rwservlet?userid=PRACTICE/PRTC@MYDB&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html&paramform=no&p_1=P1&p_1=P2
my schema is PRACTICE, password PRTC and database instance MYDB
the report path = C:\FORM\MODULE1.JSP
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally, I tried
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=PRACTICE/PRTC@MYDB&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html&paramform=no&p_1=P1&p_1=P2
The following error occured
REP-51002: Bind to Reports Server repsrv failed
I don't understand.
It seems that the Report Service is not recognized although the java-based window state that the Report Server (repsrv) is ready.
My questions:
1. Does it means that my report server is not running?
Or it is running but the web browser didn't recognize it?
I use Internet Explorer 5 and Netscape 7, both of them showed the same error message.
2. The paper said there is supposed to be 2 type of server, 'In process' and custom server.
Both of them will create a configuration file in /reports/conf in DevSuiteHomeDirectory.
I can see the custom report server's configuration file which I create using rwserver
(repsrv.conf)
but I can't see the 'in process' server's configuration file (rep_<computer_name>.conf).
What am I supposed to do?
3. Is there any steps with I supposed to do after the installation?
Well, I didn't find any error during the installation, everything seems to be just fine.
Perhaps, I need to modify some files, specifya report server name,
create the 'in process' server manually.
Many thanks,
Imelda

Hi,
I have already tried your suggestion.
Since I am in Windows 2000 platform, so I do the first suggestion from the documentation.
If the host machine is not in a network (that is, it is a standalone machine).
Solution for Windows platform: Install the MS loopback adapter, as described on the Miscrosoft Web site (http:\\microsoft.support.com). Then, specify an IP address for your machine (either XP or Windows 2000), as follows:
1. On your desktop, right-click My Network Places, and choose Properties.
2. Right-click the MS loopback adapter, and choose Properties.
3. In the Properties dialog box, select Internet Protocol (TCP/IP), and click Properties.
4. Select Use the following IP address, and enter a valid IP address. The subnet mask field will automatically populate. Do not use the local host IP (that is, 127.0.0.1). For example, enter: 198.162.1.1.
5. Click OK, and follow the instructions displayed.
There is also solution for UNIX platform.
But I do the Solution for Windows platform only.
But still I've got the following error message :
REP-51002: Bind to Reports Server rep_<computer_name> failed
And in the command line of OC4J which I started, the following error appeared :
Not able to load oracle.reports.util.EnvironmentGlobal class
Using oracle.reports.util.Environment class
BTW,
I also tried to use the command lin rwrun :
rwrun report="D:\My Documents\TryReport\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\TryReport\module1.pdf"
And somehow a PDF file appeared.
It contains the output of the report I created.
It exactly the same as the preview of the web layout which is run from Report Builder (Run Web Layout CTRL-R).
Could this mean that the In-Process server is running?
Perhaps the browser did not understand how to connect to Report Server?
Is there anything should be done?
Should I also do the Solution for UNIX platform? (Mine is Windows)
And, why for Oracle Form (running as a servlet), everything seems to be normal?
Does the Oracle Form use different server from Oracle Report?
The problem is only when I tried to call report using a button inside Oracle Form.
(Run_Report_Object and Web.Show_Document)
Any light would be grateful.
Many thanks,
Buntoro

Problem in Calling a report from form 6i using parameters

Hello Oracle experts,
I am facing a problem while calling a report using form 6i and passing parameters,
Actually the problem is I want to use the parameters passed to reports in a
query group in my report. I am not able to use the parameters passed by form to report in one of my query groups in report. Could anybody guide my how to use it.
Thanks

Hello Oracle experts,
The parameters are getting passed successfully in my report.
But I want to know hous to use it in my query group.
I just want the syntax.
Thanks

How to call discoverer report with parameters over http link?

Hi!
I'm using oracle application server 9.0.4 (incl. discoverer).
I have an oracle portal report where I want to call a discoverer report for each line over a http link. It is always the same discoverer report - with each line I want to pass parameters to my discoverer report.
How can I pass parameters to the report? Is there another way rather than using GET parameters?
Thanks
Markus

Hi Markus
You need to determine whether you can in fact call a Discoverer report using a URL before linking it in Portal. You need to run the report in Viewer first and then see copy the URL from the address line of the browser. Then you open another browser and paste the URL. You may well be prompted for a username and password but hopefully the correct report with the right parameters will then execute.
Assuming this works you then paste the same URL link into Portal and you should be able to get the report to run.
Best wishes
Michael

Calling report from a form with user input parameters

Hello,
I am new to Oracle reports. I have an application coded in 6i. I am currently running the application in Oracle Forms Builder 9i. There are also few reports which are called from the forms. Since the application was developed in 6i, the report was called using Run_Product. The forms pass a set of user parameters to the report using the parameter list pl_id. The syntax used was Run_Product(REPORTS, 'D:\Report\sales.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
I learnt that the Run_product doesnt work in 9i and we need to use run_report_object. I have changed the code to use run_report_object and using web.show_document () i am able to run the report from the form. There are 2 parameters that need to be passed from forms to reports. The parameters are from_date and to_date which the user will be prompted to enter on running the form. In the report, the initial values for these parametes are defined. So, the report runs fine for the initial value always. But when i try to change the user inputs for the form_date and to_date, the report output doesnt seem to take the new values, instead the old report with the initial values(defined in the report) runs again.
Can someone give me the code to pass the user defined parameters to the report from the forms? I have defined a report object in the forms node as REPTEST and defined a parameter list pl_id and added form_date and to_date to pl_id and used the following coding:
vrepid := FIND_REPORT_OBJECT ('REPTEST');
vrep := RUN_REPORT_OBJECT (vrepid,pl_id);
But this doesnt work.
Also, Should the parameters defined in the forms and reports have the same name?

Thanks for the quick response Denis.
I had referred to the document link before and tried using the RUN_REPORT_OBJECT_PROC procedure and ENCODE functions as given in the doc and added the following SET_REPORT_OBJECT_PROPERTY in the RUN_REPORT_OBJECT_PROC :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
But this also dint work. Please help me understand what difference does setting paramform=no OR paramform=yes make?
In the report, i have defined the user parameters as FROM_DATE and TO_DATE respectively so that they match the form datablock BLK_INPUT items FROM_DATE and TO_DATE.
My WHEN_BUTTON_PRESSED trigger is as below:
DECLARE
report_id report_object;
vrep VARCHAR2 (100);
v_show_document VARCHAR2 (2000) := '/reports/rwservlet?';
v_connect VARCHAR2 (30) := '&userid=scott/tiger@oracle';
v_report_server VARCHAR2 (30) := 'repserver90';
BEGIN
report_id:= find_report_object('REPTEST');
-- Call the generic PL/SQL procedure to run the Reports
RUN_REPORT_OBJECT_PROC( report_id,'repserver90','PDF',CACHE,'D:\Report\sales.rdf','paramform=no','/reports/rwservlet');
END;
... and the SET_REPORT_OBJECT_PROPERTY code in the RUN_REPORT_OBJECT_PROC procedure is as:
PROCEDURE RUN_REPORT_OBJECT_PROC(
report_id REPORT_OBJECT,
report_server_name VARCHAR2,
report_format VARCHAR2,
report_destype_name NUMBER,
report_file_name VARCHAR2,
report_otherparam VARCHAR2,
reports_servlet VARCHAR2) IS
report_message VARCHAR2(100) :='';
rep_status VARCHAR2(100) :='';
vjob_id VARCHAR2(4000) :='';
hidden_action VARCHAR2(2000) :='';
v_report_other VARCHAR2(4000) :='';
i number (5);
c char;
c_old char;
c_new char;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,report_file_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,report_server_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,report_destype_name);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,report_format);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,' FROM_DATE='||:BLK_INPUT.FROM_DATE||' TO_DATE='||:BLK_INPUT.TO_DATE||' paramform=no');
hidden_action := hidden_action ||'&report='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY (report_id,REPORT_DESFORMAT);
hidden_action := hidden_action ||'&userid='||get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
c_old :='@';
FOR i IN 1..LENGTH(report_otherparam) LOOP
c_new:= substr(report_otherparam,i,1);
IF (c_new =' ') THEN
c:='&';
ELSE
c:= c_new;
END IF;
-- eliminate multiple blanks
IF (c_old =' ' and c_new = ' ') THEN
null;
ELSE
v_report_other := v_report_other||c;
END IF;
c_old := c_new;
END LOOP;
hidden_action := hidden_action ||'&'|| v_report_other;
hidden_action := reports_servlet||'?_hidden_server='||report_server_name|| encode(hidden_action);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'pfaction='||hidden_action||' '||report_otherparam);
-- run Reports
report_message := run_report_object(report_id);
rep_status := report_object_status(report_message);
IF rep_status='FINISHED' THEN
vjob_id :=substr(report_message,length(report_server_name)+2,length(report_message));
message('job id is'||vjob_id);pause;
WEB.SHOW_DOCUMENT(reports_servlet||'/getjobid'||vjob_id||'?server='||report_server_name,' _blank');
ELSE
--handle errors
null;
END IF;
In the code - " hidden_action := hidden_action ||'&'|| v_report_other; " in the RUN_REPORT_OBJECT_PROC procedure above, how do i make sure that the v_report_other variable reflects the user input parameters FROM_DATE and TO_DATE ??? v_report_other is initialised as v_report_other VARCHAR2(4000) :=''; in the procedure. Will ensuring that the v_report_other contains the user input parameters FROM_DATE and TO_DATE ensure that my report will run fine for the input parameters?
Thanks in advance.
Edited by: user10713842 on Apr 7, 2009 6:05 AM

FRM-41213 When calling report from a form using RUN_REPORT_OBJECT

Hi,
I get an error frm-41214:unable to connect to the report server when i am trying to call a report from a form using RUN_REPORT_OBJECT.
My code is as follows:
I have created a simple report using employee table such tht when i give the department number as parameter it should get the corresponding details along with that i also have highlited the system parameters:
DESFORMAT
DESNAME
DESTYPE
also other user parameters as
p_action
p_servername
p_user_connect
and in the before parameter form trigger the following code:
function BeforePForm return boolean is
vc_parameter_form VARCHAR2(4000);
vc_hidden_runtime_values VARCHAR2(1000);
vc_report_name VARCHAR2(100);
begin
IF (:P_ACTION = '_action_') THEN
     vc_hidden_runtime_values := '_hidden_';
ELSE
     srw.get_report_name(vc_report_name);
          vc_hidden_runtime_values:='report='||vc_report_name||'&destype='||:destype||'&desformat='
||:desformat||'&userid='||:p_user_connect||'&server='||:p_servername;
END IF;
vc_parameter_form:='<html><body bgcolor="#ffffff"><form method=post action="'
||:P_ACTION||'">'||'<input name="hidden_run_parameters" type=hidden value="'
||vc_hidden_runtime_values||'">'||'<center><p><table border=0 cellspacing=0 cellpadding=0><tr><td>'
||'<input type=submit></td><td width=15><td><input type=reset></td>'||'</tr></table><p><hr><p>';
                    srw.set_before_form_html(srw.text_escape,vc_parameter_form);
return (TRUE);
end;
After this i created a form with department table as my datablock:
I created a report object in the form with name REPORT6.
-Created a procedure in the form with the following code
PROCEDURE RUN_REPORT_OBJECT_PROC(report_id REPORT_OBJECT,reportserver VARCHAR2,runformat VARCHAR2) IS
report_message VARCHAR2(100);
rep_status VARCHAR2(100);
vc_user_name VARCHAR2(100);
vc_user_password VARCHAR2(100);
vc_user_connect VARCHAR2(100);
vc_connect VARCHAR2(300);
BEGIN
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,ASYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,runformat);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,reportserver);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_OTHER,'p_deptno='
||:Dept.Deptno
||' paramform=yes P_USER_CONNECT='
||vc_connect||' P_SERVERNAME='||reportserver
||' P_ACTION=http://iitv-1:8888/reports/rwservlet?');
report_message:=run_report_object(report_id);
rep_status := report_object_status(report_message);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
rep_status := report_object_status(report_message);
END LOOP /* Wait for Report to be finished */;
IF rep_status='FINISHED' then
web.show_document('http://iitv-1:8888/reports/rwservlet/getjobid'||
substr(report_message,instr(report_message,'_',-1)+1)||'?server'
||reportserver,'_blank');
ELSE
message (rep_status||' Report output aborted');
END IF;
END;
I created a press button and in the when_button_pressed trigger i added the following code:
declare
     repid REPORT_OBJECT;
     repserver VARCHAR2(100);
     runformat VARCHAR2(10);
BEGIN
     repid := find_report_object('REPORT6');
     repserver := 'rep_iitv-1';
     runformat := 'HTML';
     run_report_object_proc(repid,repserver,runformat);
     END;
Then tried to run the form but i got this error frm-41213 unable to connect to the report server.
Any one please help me.

Run_report_object can't work with forms9i
Regards
Vikas Singhal

Calling report using parameters

Similar Messages

Maybe you are looking for