Calling URLLoader from AIR in Rapid Succession Causes Error 2032

Hi All,
Within AIR, I am issuing multiple POST calls with URLLoader in rapid succession to the same web service on the same server.
About half of them fail with error #2032. In the HTTPStatus handler, I get status=0.
I suspected keep-alive issues, so I added "Content: close" to the URLRequest header and made sure I called URLLoader.close() as soon as I got a succesful response from calls which succeeded- but no joy.
I would appreciate any ideas.
mlavie

Kglad and Amy - thanks for your responses.
I inspected the traffic in Fiddler and Wireshark. It appears that AIR is not even trying to reach the server for those failed instances. After extensive Googling, it seems that mutiple URLLoader calls is a sure recipe for problems. I made the calls serial by having each Success handler call the next URLLoader.
Again - thanks for repsonding,
mlavie

Similar Messages

Embedded .swf's calling javascript from air container

1) I have an html/ajax air app version 1.5.1
2) This air app embeds .swf files from an external source / web server & plays the embdded .swf inside air.
3) The embedded .swf file has a button with an onClick event
function onClick(event:MouseEvent):void {
ExternalInterface.call("someJavascriptMethod()" );
4) The javascript method to be called is already parsed inside the containing Air app and is waiting to be triggered.
5) When the onClick is triggered, the following error is thrown.
Error: Error #2067: The ExternalInterface is not available in this container. ExternalInterface requires Internet Explorer ActiveX,
Firefox, Mozilla 1.7.5 and greater, or other browsers that support NPRuntime.
at Error$/throwError()
at flash.external::ExternalInterface$/call()
at stress_fla::MainTimeline/onClick()
6) On investigation I found on your livedoc's website that Air does not support the ExternalInterface.call method.
http://livedocs.adobe.com/labs/air/1/aslr/flash/external/ExternalInterface.html
Look for Note: Adobe AIR currently does not support the ExternalInterface class.
7) Does anyone here know how I can get an embbeded .swf file to call javascript methods in the containing air application? I have had a look at the getUrl method but this is now longer supported & even the FS command but still to no avail. I may have a work around by inserting a DOM element over the top of the embedded .swf but this is not an elegant solution & want the .swf to talk directly to the air app container.
All help & comments welcome
Thanks
Kyle
Additionally I have found
http://help.adobe.com/en_US/AIR/1.5/devappsflash/WS5b3ccc516d4fbf351e63e3d118666ade46-7ed4 .html
Using the Html Loader so that Actionscript can call/manipulate the dom objects. At first I was whopee but then I tried the examples listed in the help. The HTMLLoader class is only available in Air. When trying to use import flash.html.HTMLLoader; Flash C4 complains that the Definition cannot be found on compile time & therefore does not export my movie correctly. Has anyone else had this problem or have a solution??
More additions:
The reason the htmlLoader class was not compiling was due to the source action script provided being ActionScript 2.0 - the htmlLoader class is a 3.0 library.
However, after more investigation I have found the current structure.
The air app has an html base/root doc. On periodic javascript events - .swf files are downloaded via
videos = new air.Loader();
netStream = new air.URLRequest(path + file);
videos.load(netStream);
So now I have a html container in my air app that creates a new air.Loader which downloads the external .swf file in which I want an onClick event in the action Script of the downloaded .swf file to call a Javascript method of the parent air container. Simple yea?
Or am I making life to hard for myself? Have been looking at the security snadboxes but I don't see how I can get the .swf file to talk nicely with the outer air container. Please help if able.
Thanks
Kyle

Hi Kenneth,
Your explanation makes sense.
I have a big JavaScript file full of special mathematical functions written by a mathematician who only knows how to program in Javascript.
I need to call the Javascript functions from within an ActionScript library, which obviously has no UI, and thus HTML and/or HTMLLoader are not an option.
Any ideas?
TIA,
mlavie

Calling class from servlet gives 500

I have a servlet that works fine by itself, and another class that works fine by itself. However, when I try to create a new instance of the class using the servlet and access a method in the class such as:
Servlet code
Object a = new Object()
a.method
the server returns 500.
Is there some security aspect to calling classes from servlets that may be causing this?

Thanks for the replies which have tracked the problem down.
The Server log says:
NoClassDefFoundError: oracle/jdbc/driver/OracleDriver
This class is needed by the class being called by the servlet.
The missing class is in a jar file which is put on the classpath when running the class in a standalone environment. I don't know if it's possible to put this jar on the classpath in the Server environment.
However a solution is to explode the jar file and put the exploded classes in the WEB-INF/classes of the Server. The only disadvantage is that they get wiped out every time I re-deploy the application war file.

Calling Report from Oracle form 11g

I am new to Forms 11g, trying to call report from Oracle forms 11g .
I want to call report from oracle forms, but its giving error.
Below is the code
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('empreport'); -- report node in forms builder
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, BATCH);
set_report_object_property ( repid, report_filename, 'empreport.rdf' ); -- report name
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'RptSvr'); -- report server name
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if
rep_status = 'FINISHED'
then
WEB.SHOW_DOCUMENT('http://inorasrv-pc:7001/reports/dtd/rwservlet/getjobid='||v_rep||'?server='||'RptSvr','_blank');
else
message ( 'error while running reports-object ' || error_text );
message ( ' ' );
clear_message;
end if;
end;
Above code giving following error :
Unable to connect to report server RptSvr
I think my report servername is wrong
Where to find report server name in 11g.
I am Using weblogic server, so can i give weblogic server name
Thanks in advance.
Edited by: parapr on Aug 17, 2012 1:52 AM
Edited by: parapr on Aug 17, 2012 3:21 AM

Hi,
You have to have the report server
a. Installed and configured
b. Running.
See
http://docs.oracle.com/cd/E21764_01/bi.1111/b32121/pbr_strt001.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_verify004.htm
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_conf003.htm#i1007341
If you are using rwservlet then you will find the name from the Configuration file referred to in the last link.
Cheers,

Call webservice from PJC over https protocol

Hello!
I have problem calling webservice from PJC.
The webservice is on https server so I must declare the keystore and truststore...
I have generated java classes from wsdl file with SOPAUI and axis 1.0...
Then I have made a code which integrate axis library, jsee ...
On the client side all works fine (with jdk 1.3 compiler)
When I deploy it on oracle forms server and call it from oracle form I get the error:
java.net.MalformedURLException: unknown protocol: https
in this way I register the certificate..
private void registrirajCertifikat(String direktorij, String password,
        String keyStore, String trustStore) {
       System.out.println("keystore: " + direktorij + keyStore);
        System.out.println("trust: " + direktorij + trustStore);
        System.out.println("========================================");
        System.setProperty("javax.net.ssl.keyStore", direktorij + keyStore);
        System.setProperty("javax.net.ssl.keyStorePassword", password);
        System.setProperty("javax.net.ssl.keyStoreType", "pkcs12");
        System.setProperty("javax.net.ssl.trustStore", direktorij + trustStore);
        System.setProperty("javax.net.ssl.trustStorePassword",   password);
        System.setProperty("javax.net.ssl.trustStoreType", "jks");
        System.out.println("========================================");
        System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
        Security.addProvider( new com.sun.net.ssl.internal.ssl.Provider() );
    }I have my kestore and truststore located on http server..
Every time the bean is initializzed I download the keystore and truststore to my java.tmp.dir
The same code in Jdeveloper works fine.. also in cmd prompt.. but in oracle forms I can't get it to run..
anybody can help me?
this is my console output when running a form:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\peterv.IN2SLO
Proxy Configuration: no proxy
JAR cache enabled
     Location: C:\Documents and Settings\peterv.IN2SLO\Oracle Jar Cache
     Maximum size: 50 MB
     Compression level: 0
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
q:   hide console
s:   dump system properties
t:   dump thread list
x:   clear classloader cache
0-5: set trace level to <n>
Loading http://dekani:7777/forms/java/frmall_jinit.jar from JAR cache
Loading http://dekani:7777/forms/java/images.jar from JAR cache
Cached copy of http://dekani:7777/forms/java/in2kartica.jar
** DOKUMENTNI SISTEM   **
** PJC bean                     **
zacetek
http://10.1.2.235/in2/asarh.pfx
Copying resource (type: application/octet-stream, modified on: Dec 18, 2009 12:39:35 PM)... to: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
3794 byte(s) copied
http://10.1.2.235/in2/arhaskeystore.jks
Copying resource (type: application/octet-stream, modified on: Dec 18, 2009 12:39:35 PM)... to: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
3800 byte(s) copied
Registriramo nastavitve za SSL
keystore: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
trust: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
========================================
po registraciji nastavitev za SSL
========================================
https://hosting.arhiviraj.si/webservice2/InDocArchiveWS.asmx
--> napaka: *java.net.MalformedURLException: unknown protocol: https*
java.net.MalformedURLException: unknown protocol: https
     at java.net.URL.<init>(Unknown Source)
     at java.net.URL.<init>(Unknown Source)
     at java.net.URL.<init>(Unknown Source)
     at in2.mikrocop.Test.dokumenti(Test.java:94)
     at in2.mikrocop.Test.testiranje(Test.java:66)
     at in2.mikrocop.Test.<init>(Test.java:49)
     at java.lang.Class.newInstance0(Native Method)
     at java.lang.Class.newInstance(Unknown Source)
     at oracle.forms.ui.VBean.instantiateBean(Unknown Source)
     at oracle.forms.ui.VBean.setProperty(Unknown Source)
     at oracle.forms.handler.UICommon.instantiate(Unknown Source)
     at oracle.forms.handler.UICommon.onCreate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
     at oracle.forms.engine.Runform.startRunform(Unknown Source)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

I have tryed tu run my example with Jinitiator "java" like
c:\java -jar c:\in2kartica.jar
and all works fine..
I don't know why the same example won't run inside oracle form as javabean?!?
this is my cmd console
C:\jdk\bin>java -jar c:\in2kartica.jar
** DOKUMENTNI SISTEM   **
** PJC bean            **
keystore: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\asarh.pfx
trust: C:\DOCUME~1\PETERV~1.IN2\LOCALS~1\Temp\arhaskeystore.jks
========================================
po registraciji nastavitev za SSL
========================================
https://hosting.arhiviraj.si/webservice2/InDocArchiveWS.asmx
unknown attr1.3.6.1.4.1.311.17.1
Dolzina: 91 <------------ this is the result from webservice located on address above

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser

Can i get help on how I can successfully install the new google voice video chat software. I keep having an install error. My google voice phone always worked until a week ago when suddenly google would not let me call out from any browser until I installed their new google voice and video chat (made by vidyo) software. I was told by genius bar to install Yosemite, which I did. But that did not solve the problem. I removed macKeeper, as well, since a techie friend told me that could be the cause. Nothing so far has worked. When the problem first happened, it seemed to only happen in Chrome. Google voice calling out worked fine in safari, for about a day or so. Now I cannot call out from any browser. I can, however receive calls, and make calls within the video hangout.
I can be contacted directly if questions at gary at couplewise dot followed by the usual extensin

You can only suspend service for 3 months at a time (with or without payment) and only twice a year.

I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanks

If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger

Calling PointBasedClustering,js file from custom,js file is causing an issue

I am calling PointBasedClusteringmodule from a function in custom.js file
GetMap function is called on page load and the code resides in custom.js file.
function GetMap() {
// Initialize the map
map = new Microsoft.Maps.Map(document.getElementById("MapHolder"),
credentials: "xxxxxxxxxxxxxxx", zoom: 2,
mapTypeId: Microsoft.Maps.MapTypeId.road, showDashboard: true,
center: new Microsoft.Maps.Location(41.021429, 21.337973)
//Nate: 3/26/15: for clustering pushpins
Microsoft.Maps.registerModule("PointBasedClusteringModule", "~/PointBasedClustering.js");
Microsoft.Maps.loadModule("PointBasedClusteringModule", { callback: moduleLoaded });
Microsoft.Maps.Pushpin.prototype.title = null;
Microsoft.Maps.Pushpin.prototype.description = null;
//Getlocations function moved to moduleloaded function
The PointBasedClustering.js file as follows. The error is coming after the module is loaded at
Microsoft.Maps.moduleLoaded('PointBasedClusteringModule');
Unhandled exception at line 447, column 1 in http://localhost:52723/Scripts/PointBasedClustering.js
0x800a1391 - JavaScript runtime error: 'Microsoft' is undefined
Any ideas on what is causing this.
Thanks
Nate

Verify that you haven't also added a script reference in your HTML to the module. If you have it's likely that this code is being executed before the Bing Maps control is loaded.
http://rbrundritt.wordpress.com

Problem in calling BRI from PRI

Hi,
I am having problem in calling BRI from PRI. I am getting below message while debugging. Also note that calling from BRI to PRI is successful.
Mar 2 23:38:22: ISDN BR0/0 Q931: RX <- SETUP pd = 8 callref = 0x04
Sending Complete
Bearer Capability i = 0x8890
Standard = CCITT
Transer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band info
Calling Party Number i = 0x2183, '1726601501'
Plan:ISDN, Type:National
*Mar 2 23:38:22: ISDN BR0/0:1: Incoming call rejected, unbindable
*Mar 2 23:38:22: ISDN BR0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x15E
*Mar 2 23:38:22: ISDN BR0/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x84
Cause i = 0x8095 - Call rejected
Pls help me.
Anis
9229109694

Dear Dharmesh,
Can u pls explain where to enable PPP Multilink.
Dear p.bevilacqua ,
I did what u told (configure "ppp chap username" under dialer interface), but the problem is same.
Anis

Consuming SOAP services from AIR/HTML (JavaScript).

Hi All.
I am trying to consume SOAP web services from an AIR/HTML application for a research on AIR I am doing for my company, and I am having very little success.
I am creating JavaScript clients using apache's cxf wsdl2js utility.
When I try to use the client to call any web service I've tried, I always get an 'error 500' response.
The web services work fine if i call them from other clients.
Before trying cxf generated clients I googled a lot to see if there was a more native way of doing these calls from AIR, but found nothing. I don't see anything in documentation or the web about it.
Am I the only one trying this?
Could this be a cross-domain issue? I'm certainly hoping AIR apps don't have this issue.
Any pointers as to how to succesfully consume SOAP services from AIR is greatly appreciated.
Thanks!

In Visual Basic, you can set Network Credentials like this (assuming that you first declare Public CallWebService001 As New <WebReference>):
        ' Create a new instance of CredentialCache.
        Dim mycredentialCache As Net.CredentialCache = New Net.CredentialCache()
        ' Create a new instance of NetworkCredential using the client
        ' credentials.
        Dim credentials As Net.NetworkCredential = New Net.NetworkCredential(<username>, <password>)
        ' Add the NetworkCredential to the CredentialCache.
        mycredentialCache.Add(New Uri(CallWebService001.Url), "Basic", credentials)
        ' Add the CredentialCache to the proxy class credentials.
        CallWebService001.Credentials = mycredentialCache

Duplicate session error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with CF10

We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
generally due to the remote host disabling session cookies.
Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
Have read most of the docs about this error -all to do with LCDS
Notes:
Not using LCDS,
No Remote Calls from loaded Sub-Apps,
No Errors from the Flex Web App which is pretty much identical and calls the same cfcs.
The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
Could it be a two first time remote calls hitting the server together before a session is set up?
Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
Please advise thank you.

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

How do I run a JCA adapter when I am calling it from an EJB?

How do I run a JCA adapter when I am calling it from an EJB? Do I need to create an EJB client and place it in a Client container? If my EJB and JCA adapter are deployed is there a way to call my EJB from the command line?
Mike

Hi. When you look at the code I provided for you in other thread you will see that connecting to adapter is done through JNDI lookup. The creation of the adapter is done in your J2EE server. Here is some code for you where you can find mapping from code to ejb-jar and orion-ejb-jar.
ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd"
version="2.1">

<display-name>JMS Consume MDB - opp-ifs</display-name>
<enterprise-beans>
<entity>
<description>Entity Bean ( BMP )</description>
<display-name>EBEjbMecomsIFS</display-name>
<ejb-name>EBEjbMecomsIFS</ejb-name>
<local-home>EBEjbMecomsIFSLocalHome</local-home>
<local>EBEjbMecomsIFSLocal</local>
<ejb-class>EBEjbMecomsIFSBean</ejb-class>
<persistence-type>Bean</persistence-type>
<prim-key-class>java.lang.Long</prim-key-class>
<reentrant>false</reentrant>
<service-ref>
<service-ref-name>service/interceptor</service-ref-name>
<service-interface>javax.xml.rpc.Service</service-interface>
<wsdl-file>META-INF/wsdl/MHS5_Jms_In_RS.wsdl</wsdl-file>
<service-qname xmlns:ns="http://oracle.com/esb/namespaces/PilotOWSM_MustHavesScenario5">ns:ESB_MHS5_Jms_In_RS_Service</service-qname>
</service-ref>
</entity>
<message-driven>
<display-name>JMS Consume MDB - MDB</display-name>
<ejb-name>MDBEjbMecomsIFS</ejb-name>

<ejb-class>MDBEjbMecomsIFSBean</ejb-class>

<messaging-type>javax.jms.MessageListener</messaging-type>
<transaction-type>Container</transaction-type>


<ejb-local-ref>
<ejb-ref-name>ejb/local/EBEjbopp_ifs</ejb-ref-name>
<ejb-ref-type>Entity</ejb-ref-type>
<local-home>EBEjbMecomsIFSLocalHome</local-home>
<local>EBEjbMecomsIFSLocal</local>
<ejb-link>EBEjbMecomsIFS</ejb-link>
</ejb-local-ref>
<resource-ref>

<res-ref-name>jms/QueueConnectionFactory</res-ref-name>

<res-type>javax.jms.ConnectionFactory</res-type>

<res-auth>Container</res-auth>
</resource-ref>
</message-driven>
</enterprise-beans>
<assembly-descriptor>

<container-transaction>
<method>
<ejb-name>MDBEjbMecomsIFS</ejb-name>
<method-name>onMessage</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
<container-transaction>
<method>
<ejb-name>EBEjbMecomsIFS</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Supports</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
orion-ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<orion-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNameSpaceSchemaLocation="http://www.oracle.com/technology/oracleas/schema/orion-ejb-jar-10_0.xsd">
<enterprise-beans>
<entity-deployment name="EBEjbMecomsIFS">
<service-ref-mapping name="service/interceptor">
<wsdl-location>http://on-poc62.ontw.alfa.local:7777/event/PilotOWSM/MustHavesScenario5/MHS5_Jms_In_RS?wsdl</wsdl-location>
<service-qname localpart="ESB_MHS5_Jms_In_RS_Service" namespaceURI="http://oracle.com/esb/namespaces/PilotOWSM_MustHavesScenario5"/>
<port-info>
<wsdl-port namespaceURI="http://oracle.com/esb/namespaces/PilotOWSM_MustHavesScenario5"
localpart="__soap_MHS5_Jms_In_RS_execute_ppt"/>
<service-endpoint-interface>javax.xml.rpc.Service</service-endpoint-interface>
<call-property>
<name>javax.xml.rpc.service.endpoint.address</name>
<value>http://on-poc62.ontw.alfa.local:7777/event/PilotOWSM/MustHavesScenario5/MHS5_Jms_In_RS</value>
</call-property>
<call-property>
<name>javax.xml.rpc.soap.http.soapaction.uri</name>
<value>execute</value>
</call-property>
<call-property>
<name>javax.xml.rpc.soap.http.soapaction.use</name>
<value>true</value>
</call-property>
<call-property>
<name>javax.xml.rpc.soap.operation.style</name>
<value>document</value>
</call-property>
<runtime enabled="owsm">
<owsm init-home="/oracle/product/SoaAs/10.1.3/owsm/config/interceptors/C0003002"
init-file="confluent.properties"/>
</runtime>
</port-info>
</service-ref-mapping>
</entity-deployment>
<message-driven-deployment name="MDBEjbMecomsIFS"
resource-adapter="OEMSJMSDRAopp-ifs"
enabled="true" max-instances="10">

<resource-ref-mapping location="OEMSJMSDRASubopp-ifs/MyXACF"
name="jms/QueueConnectionFactory"/>



<config-property>
<config-property-name>ConnectionFactoryJndiName</config-property-name>
<config-property-value>OEMSJMSDRASubopp-ifs/MyXAQCF</config-property-value>
</config-property>

<config-property>
<config-property-name>DestinationName</config-property-name>
<config-property-value>OEMSJMSDRASubopp-ifs/MyQ</config-property-value>
</config-property>

<config-property>
<config-property-name>DestinationType</config-property-name>
<config-property-value>javax.jms.Queue</config-property-value>
</config-property>


<config-property>
<config-property-name>ListenerThreadMaxPollInterval</config-property-name>
<config-property-value>5000</config-property-value>
</config-property>

<config-property>
<config-property-name>MaxDeliveryCnt</config-property-name>
<config-property-value>0</config-property-value>
</config-property>

</message-driven-deployment>
</enterprise-beans>
<assembly-descriptor>
<default-method-access>
<security-role-mapping name="<default-ejb-caller-role>"
impliesAll="true"/>
</default-method-access>
</assembly-descriptor>
</orion-ejb-jar>

Calling ShowCursor from C++

I'm working on a Java application that already embeds Flash, direct show video, and other native code. Since this application has the occasional need to be in a kiosk mode, I am attempting to find a way to hide the mouse cursor without having to modify every one of our native controls.
I'm attempting to use JNI and have successfully created an example that can cause the system to beep and move the mouse cursor to 0,0 -- just to prove that my method is alive -- but the call to ShowCursor does nothing and I don't understand why.
extern "C"
JNIEXPORT jint JNICALL Java_com_pvue_test_AthenaCursorControl_SetCursorVisible
(JNIEnv *jenv, jclass theClass, jboolean isShown){
int result = ShowCursor(isShown);
//while (ShowCursor(FALSE) >= -1 ) ; //uncomment to just hide the cursor
// Do these just to prove this method is alive
SetCursorPos(0,0);
MessageBeep(0x00000040L);
return result;
}I'm calling this from Java after the JFrame has been completely laid out and is visible. I'm a total Win32/C++ newbiew so I assume there must some some prerequisites to be able to have ShowCursor have any effect.

Not helpful to send us somewhere else if you do not know the solution.
1. Load the 1px transparent cursor.
2. http://www.codeguru.com/cpp/w-p/dll/tips/article.php/c3635/
#if _MSC_VER >= 1300    // for VC 7.0
// from ATL 7.0 sources
#ifndef _delayimp_h
extern "C" IMAGE_DOS_HEADER __ImageBase;
#endif
#endif
HMODULE GetCurrentModule()
#if _MSC_VER < 1300    // earlier than .NET compiler (VC 6.0)
// Here's a trick that will get you the handle of the module
// you're running in without any a-priori knowledge:
// http://www.dotnet247.com/247reference/msgs/13/65259.aspx
MEMORY_BASIC_INFORMATION mbi;
static int dummy;
VirtualQuery( &dummy, &mbi, sizeof(mbi) );
return reinterpret_cast<HMODULE>(mbi.AllocationBase);
#else    // VC 7.0
// from ATL 7.0 sources
return reinterpret_cast<HMODULE>(&__ImageBase);
#endif
HCURSOR mojCursor = LoadCursor(GetCurrentModule()/*GetModuleHandle(NULL)*/, MAKEINTRESOURCE(IDC_CURSOR1));
SetSystemCursor (mojCursor, OCR_NORMAL);Edited by: divukman on Dec 29, 2008 6:12 AM

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

Calling report from FORM - error Invalid value of paramente 'P_YEAR'

Hi guys,
Could you please help me to figure out what is going wrong
with my form which run a report?
I am using Developer suite 10g.
when i run report from report application it run fine,
but when i call that report from a form it gives me error.
I have checked the datatype, checked the parameter value
that I assign from form is available in the report parameter value.
What else do i have to check in order to run this report
from the form.
Error Message from Report Queue Manager:
Invalid value for parameter 'P_YEAR'.
Your insight will be appreciated.

Thank you for reply Denis,
Here is the code which run_report from form.
DECLARE
-- variables for running individual reports
report_filename               VARCHAR2(40);
var_reportpath               VARCHAR2(100);
report_otherparms      VARCHAR2(200);
-- variables to keep track of successful reports in silent mode
rep_status                         VARCHAR2(40);
rep_req                                   NUMBER := 0;
rep_count                              NUMBER := 0;
dummy                                        NUMBER;
-- variables to load the report names and checkboxes into the parameter list
pl_id                                        PARAMLIST;
plname                                   VARCHAR2(20) := 'rpt_list';
-- variables to loop through the parameter list and run the reports
i                                                  NUMBER;
split_loc                              NUMBER;
     param_value                         VARCHAR2(40);
     checkbox_name                    VARCHAR2(40);
     report_basename               VARCHAR2(40);
     svc_name                              VARCHAR2(4);
     run_report                         BOOLEAN;
     disp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'DISP',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
hosp_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'HOSPICE',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
orth_exist BOOLEAN := get_current_service_count( :global.filename_prefix, 'O/P',
                    :reports_control.year_list, :reports_control.quarter_list,
                    :reports_control.group_list );
BEGIN
-- Are any reports selected?
IF BOXES_ARE_CHECKED(:System.Cursor_Block,'PRINT_NULL_REPORT') THEN
if not CHECKBOX_CHECKED('print_null_report') then
disp_exist := TRUE;
orth_exist := TRUE;
hosp_exist := TRUE;
end if;
-- Create Report Parameter Listing
pl_id := GET_PARAMETER_LIST(plname);
if NOT ID_NULL(pl_id) then
     DESTROY_PARAMETER_LIST(pl_id);
end if;
pl_id := CREATE_PARAMETER_LIST(plname);
if ID_NULL(pl_id) then
     GENERIC_ALERT('Error creating report listing');
     RAISE Form_Trigger_Failure;
end if;
ADD_PARAMETER(pl_id,'id1', TEXT_PARAMETER,'cover_page_intro!INTRO');
ADD_PARAMETER(pl_id,'id2', TEXT_PARAMETER,'utilization_profile!ALLUTIL');
ADD_PARAMETER(pl_id,'id3', TEXT_PARAMETER,'utilization_summary!ALL_SUMMARY');
ADD_PARAMETER(pl_id,'id4', TEXT_PARAMETER,'hiv_profile!HIV_PROFILE');
ADD_PARAMETER(pl_id,'id5', TEXT_PARAMETER,'wound_care_profile!WOUND_CARE_PROF');
ADD_PARAMETER(pl_id,'id6', TEXT_PARAMETER,'top_10_diagnosis!TOP10DIAG');
ADD_PARAMETER(pl_id,'id7', TEXT_PARAMETER,'diagnosis_profile!DIAG_PROFILE');
ADD_PARAMETER(pl_id,'id8', TEXT_PARAMETER,'physician_profile!PHYS_PROFILE');
ADD_PARAMETER(pl_id,'id9', TEXT_PARAMETER,'physician_specialty!PHYS_SPECIALTY');
ADD_PARAMETER(pl_id,'id10',TEXT_PARAMETER,'discharge_profile!DISCHARGE_PROFILE');
ADD_PARAMETER(pl_id,'id11',TEXT_PARAMETER,'acute_care_discharge!ACUTE_DSCHRG');
ADD_PARAMETER(pl_id,'id12',TEXT_PARAMETER,'excessive_cost_patients!EXCESSIVE_COST');
ADD_PARAMETER(pl_id,'id13',TEXT_PARAMETER,'provider_profile!PROV_PROFILE');
ADD_PARAMETER(pl_id,'id14',TEXT_PARAMETER,'service_profile!SERVICE_PROFILE');
ADD_PARAMETER(pl_id,'id15',TEXT_PARAMETER,'age_gender_profile!AGE_GENDER_PROF');
ADD_PARAMETER(pl_id,'id16',TEXT_PARAMETER,'network_services!NETWORK_SERVICES');
ADD_PARAMETER(pl_id,'id17',TEXT_PARAMETER,'thh_section_header!THH_COVER');
ADD_PARAMETER(pl_id,'id18',TEXT_PARAMETER,'thh_utilization!THH_UTILIZATION');
ADD_PARAMETER(pl_id,'id19',TEXT_PARAMETER,'thh_service_profile!THH_SVC_PROF');
ADD_PARAMETER(pl_id,'id20',TEXT_PARAMETER,'hit_section_header!HIT_COVER');
ADD_PARAMETER(pl_id,'id21',TEXT_PARAMETER,'hit_utilization!HIT_UTILIZATION');
ADD_PARAMETER(pl_id,'id22',TEXT_PARAMETER,'hit_service_profile!HIT_SVC_PROF');
ADD_PARAMETER(pl_id,'id23',TEXT_PARAMETER,'hme_section_header!HME_COVER');
ADD_PARAMETER(pl_id,'id24',TEXT_PARAMETER,'hme_utilization!HME_UTILIZATION');
ADD_PARAMETER(pl_id,'id25',TEXT_PARAMETER,'hme_service_profile!HME_SVC_PROF');
ADD_PARAMETER(pl_id,'id26',TEXT_PARAMETER,'disp_section_header!DISP_COVER');
ADD_PARAMETER(pl_id,'id27',TEXT_PARAMETER,'disp_utilization!DISP_UTILIZATION');
ADD_PARAMETER(pl_id,'id28',TEXT_PARAMETER,'disp_service_profile!DISP_SVC_PROF');
ADD_PARAMETER(pl_id,'id29',TEXT_PARAMETER,'hosp_section_header!HOSP_COVER');
ADD_PARAMETER(pl_id,'id30',TEXT_PARAMETER,'hosp_utilization!HOSP_UTILIZATION');
ADD_PARAMETER(pl_id,'id31',TEXT_PARAMETER,'hosp_service_profile!HOSP_SVC_PROF');
ADD_PARAMETER(pl_id,'id32',TEXT_PARAMETER,'orth_section_header!ORTH_COVER');
ADD_PARAMETER(pl_id,'id33',TEXT_PARAMETER,'orth_utilization!ORTH_UTILIZATION');
ADD_PARAMETER(pl_id,'id34',TEXT_PARAMETER,'orth_service_profile!ORTH_SVC_PROF');
ADD_PARAMETER(pl_id,'id35',TEXT_PARAMETER,'encounter_detail!ENCOUNTER_DETAIL');
--- set up other parameters to send to generate_report
if :reports_control.output_choices = 'FILE' then
var_reportpath := :global.report_directory || :reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
     var_reportpath := var_reportpath || 'q' || :reports_control.quarter_list;
end if;
var_reportpath := var_reportpath || '_G' || :reports_control.group_list || '_';
else
     var_reportpath := '';
end if;
report_otherparms := 'p_year='||:reports_control.year_list;
if :global.filename_suffix <> '_A10G' then
     report_otherparms := report_otherparms || '     p_quarter='||:reports_control.quarter_list;
end if;
report_otherparms := report_otherparms || ' P_REPORTGROUPID='||:reports_control.group_list;
--- Check if reports are checked and submit to Reports Server
     for i in 1..35 loop
          GET_PARAMETER_ATTR(pl_id,'id'||i,dummy,param_value);
          split_loc := instr(param_value,'!');
          checkbox_name := substr(param_value,1,split_loc-1);
          report_basename := substr(param_value,split_loc+1,length(param_value));
if CHECKBOX_CHECKED(checkbox_name) then
     run_report := TRUE;
     svc_name := substr(report_basename,1,4);
     if svc_name = 'DISP' then
          if not disp_exist then
               run_report := FALSE;
          end if;
     elsif svc_name = 'ORTH' then
          if not orth_exist then
               run_report := FALSE;
          end if;
     elsif svc_name = 'HOSP' then
          if not hosp_exist then
               run_report := FALSE;
          end if;
     end if;
     if run_report then
          report_filename := :global.filename_prefix || report_basename || '_10G';---- :global.filename_prefix || report_basename || :global.filename_suffix;
     GENERIC_ALERT(report_filename || ' ' || report_otherparms);
          rep_status := GENERATE_REPORT(report_filename,:reports_control.output_choices,var_reportpath,report_otherparms);
          rep_req := rep_req + 1;
          if rep_status = 'FINISHED' then
               rep_count := rep_count + 1;
          end if;
     end if;
     end if;
     end loop;
-- if we're in silent mode, display a completion message
     if :reports_control.output_choices = 'FILE' and CHECKBOX_CHECKED('chk_silent') then
          SET_ALERT_PROPERTY('REPORT_CREATED',alert_message_text,
     '' || rep_count || ' of ' || rep_req || ' reports created successfully');
          dummy := SHOW_ALERT('REPORT_CREATED');
end if;
ELSE
dummy := SHOW_ALERT('select_report');
END IF;
END;

Calling URLLoader from AIR in Rapid Succession Causes Error 2032

Similar Messages

Maybe you are looking for