Calls being rejected with CTI failure / timeout
I have UCCX 8.5.1.11002-22 deployed with UCM 8.5.1.13900-5.
This is a new installation.
The site is experiencing a high number of Rejected calls. I getting a mixture of two errors:
ABLISHED]->HELD; nested exception is: com.cisco.jtapi.PlatformExceptionImpl: Cti request timed out
and
Reject: Trigger Failed
When this starts almost 50% of calls hit this error, and is only recoverable by restarting the UCCX Engine. I have synch'd the JTAPI versions and no changes have been made. I have also checked the checked CTI Ports and CTI Route points and all are registered and configured.
Has anyone else seen a similar issue with UCCX 8.5?
Regards,
Alex
On scrolling through the logs I see a high number of the CTI timeouts when attempting to take the call off hold (while in the queue)
I noticed that the MoH Media Server had Multi-casting enabled. I have disabled. Does anyone know if this could potentially be related as I believe multi-casting is not supported with UCCX.
Thanks,
Alex
Similar Messages
-
Podcast feed being rejected by iTunes, with no explanation
I've tested my feed numerous times, but whenever it is submitted to iTunes it comes back rejected due to 'technicaly reasons'. I want to e-mail them about this but there is no contact address in the message, how am I supposed to fix the problem if they are so vague in the e-mail!
Anyway, does anyone have ANY idea why my feed is being rejected, it is really starting to infuriate me. Someone on another forum mentioned that as my show contains music that iTunes get paranoid and will reject it for copyright reasons, except, I've received permission from all the artists involved to use the music, so there is no issue with copyright.
The feed is:
http://www.peteholloway.co.uk/podcast/devonandback.rss
Please help if you can! thanks!
-PeteMake sure the information on your account is the same with your bank. I'd also suggest calling the bank and inquire if there are issues with your account. You can also contact support and have your account checked.
https://expresslane.apple.com/GetproductgroupList.action -
Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen? I was of the impression that this issue will be fixed with updates. Please see the screenshot.
Hello Beardsell,
This is when the phone is unlocked mode. My snapshot is when the phone is locked.
Remember when you get a call when the phone is locked and you used to have slide to answer in iOS 6 and if you slide up you would have options to reject, reject with a message and reject with a reminder. We dont have that in iOS 7. iOS 7 *****, I cannot get back to iOS6, apple needs to be user friendly. Screen shot 1 when the phone is locked, screenshot 2 when the phone is unlocked. -
Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
VivekHello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
EXPORTING
iv_subrc = lv_subrc
iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin -
Hi,
I have created an windows service for sending the mails automatically through outlook. whenever i run the service i get the following error:
Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001 Call was rejected by callee. (Exception from HRESULT: 0x80010001 (RPC_E_CALL_REJECTED)).Retrieving the COM class
factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80010001 Call was rejected by callee. (Exception from HRESULT: 0x80010001 (RPC_E_CALL_REJECTED)).
Do you have any suggestion and solution for the above mentioned problem. Thanks.Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Iphone question
my my incoming phone calls are being shared with my wife's IPhone as well, both phones are getting the same call, how do I correct?
thanksThat is a new feature described in Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off.
You may also want to look into using separate Apple IDs for you and your wife. That is now more flexible with new Family Sharing features: http://www.apple.com/ios/whats-new/family-sharing/ -
Hello, do LoadVars, XML.load(), or WebService support HTTPS-based endpoints, Yes or No?
BACKGROUND
============
I've been trying to get a LoadVars to actually make a call to an HTTPS endpoint. There is nothing in the documentation that says it can't. I know that there's also XML.load() and WebService class, but from the looks of it they don't do HTTPS.
During my tests I have absolutely no issues with making calls to the same service over HTTP. When I change it to HTTPS I don't see HTTPStatus or even failures. Also, netstat on my server will show a connection being established with the endpoint when using HTTP but not when using HTTPS. I've also tried setting SSLVerifyCertificate to "false" in my Server.xml and after a restart of AMS it doesn't help, same symptom.
I've also googled and looked through all Adobe forum posts that I can find:
https://forums.adobe.com/message/4938426#4938426
https://forums.adobe.com/thread/1661461
https://forums.adobe.com/thread/782037
https://forums.adobe.com/message/74981
https://forums.adobe.com/message/5107735#5107735
https://forums.adobe.com/message/7815#7815
https://forums.adobe.com/message/53870#53870
https://forums.adobe.com/message/87797#87797
WebService Class - http://stackoverflow.com/questions/5619776/webservice-and-fms
The best I found from the posts above is a non-commital answer from adobe staff at https://forums.adobe.com/message/4938426#4938426 and a 3rd party person saying that Webservice doesn't work at http://stackoverflow.com/questions/5619776/webservice-and-fms.
All I need is an official supported/not-supported from the Adobe staff. Shouldn't be to hard after 5 years or so of ignoring the questions in the forum right?Adobe, please provide some details to your current and possibly potential customers, in at least one of the many unanswered posts about making HTTPS requests from AMS.
P.S.
realeyes_jun,
RealEyes Media has been an inspiration to me for many years, and I would like to thank them for their efforts to better the media streaming community.
Also, would it be possible to please release the source to REDbug? -
Hi,
I have started getting this error since a week now when I try to schedule a report or change a schedule of a report.
An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Get Online Help For more information about this error navigate to the report
server on the local server machine, or enable remote errors
We have SQL Server 2008 installed along with SSRS running on the server. I have never seen this happening before for almost a year now but suddenly it appeared. Along with this, report subscription is also messed up and some report are not been
emailed as they have a error like:
Failure sending mail: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.Mail will not be resent.
I am not sure what caused this but if anyone has any idea of what is going on it will be great.
Thanks you for your help.
Please reply soooon !!!Rich, hi, sorry for my english but I speak spanish...
Well, I was tried to recreate this issue and is really hard to recreate, however and as a rain from the sky, one of my customers receive the same error that you have, reviewing Windows Logs and SQL Traces there is nothing.
Just for discard security issues I decide to change permissions in my server.
1. Go to SQL Server Reporting Services Configuration Manager
2. Go to Databases
3. Verify the credentials used to connect to the database server
4. Go to your database server
5. Look for the login or user that is being used to connect to the database server from SSRS
6. Change the role of that user and convert it to Sysadmin (Relax, this is not the final solution)
7. Try again (Is not necesary to restart ANYTHING)
8. Now, your SSRS and Subscriptions must work fine
9. If your SSRS and subscriptions are working ok, you have to give some permissions to the user
10. Grant execute permissions on
master.dbo.xp_sqlagent_notify
master.dbo.xp_sqlagent_enum_jobs
master.dbo.xp_sqlagent_is_starting
msdb.dbo.sp_help_category
msdb.dbo.sp_add_category
msdb.dbo.sp_add_job
msdb.dbo.sp_add_jobserver
msdb.dbo.sp_add_jobstep
msdb.dbo.sp_add_jobschedule
msdb.dbo.sp_help_job
msdb.dbo.sp_delete_job
msdb.dbo.sp_help_jobschedule
msdb.dbo.sp_verify_job_identifiers
11. Grant select permissions on
msdb.dbo.sysjobs
msdb.dbo.syscategories
12. Grant public role to the user in the MSDB and Master DB
13. Remove the Sysadmin role to the user
14. Try again, now, your SSRS is ready to work
Regards
Pls let me know if work for you
Regards | John Bocachica | jboca.blogspot.com -
Accounts being created with administrative group rights
Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights. Below is the EventViewer log for the user creation:
User Account Created:
New Account Name: username
New Domain: PCNAME
New Account ID: PCNAME\username
Caller User Name: PCNAME$
Caller Domain: DOMAINNAME
Caller Logon ID: (0x0,0x3E7)
Privileges -
Attributes:
Sam Account Name: username
Display Name: <value not set>
User Principal Name: -
Home Directory: <value not set>
Home Drive: <value not set>
Script Path: <value not set>
Profile Path: <value not set>
User Workstations: <value not set>
Password Last Set: <never>
Account Expires: <never>
Primary Group ID: 513
AllowedToDelegateTo: -
Old UAC Value: 0x2DAB2B0
New UAC Value: 0x2DAB2B0
User Account Control: -
User Parameters: <value not set>
Sid History: -
Logon Hours: <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID: (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
User name: DOMAINNAME\PCNAME$
Auth package: NTLM
Logon type: (none)
Session: 0
Sid: S-1-5-18
Logon time: 9/11/2014 12:41:53 PM
Logon server:
DNS Domain:
UPN:
4: System
316: smss.exe
364: csrss.exe
392: winlogon.exe
440: services.exe
452: lsass.exe
628: svchost.exe
756: LMAgent.exe
840: svchost.exe
1000: spoolsv.exe
1252: avagent.exe
1268: camWMIAgent.exe
1324: cissesrv.exe
1380: cpqrcmc.exe
1404: vcagent.exe
1440: svchost.exe
1480: HsQuotas.exe
1740: inetinfo.exe
1780: EmailAgent.exe
1856: snmp.exe
1884: sysdown.exe
1920: smhstart.exe
2192: svchost.exe
2388: cmd.exe
2396: hpsmhd.exe
2444: cqmgserv.exe
2464: cqmgstor.exe
2484: HSphere.exe
2596: wmiprvse.exe
2676: cmd.exe
2684: rotatelogs.exe
2692: cmd.exe
2700: rotatelogs.exe
2732: searchindexer.exe
2812: hpsmhd.exe
2824: cqmghost.exe
2852: svchost.exe
3044: cmd.exe
3052: rotatelogs.exe
3080: cmd.exe
3088: rotatelogs.exe
5452: svchost.exe
5596: GravitixService.exe
7392: csrss.exe
7232: winlogon.exe
6888: csrss.exe
9832: winlogon.exe
10388: wawrapper.exe
10352: cpqnimgt.exe
9496: msiexec.exe
6068: w3wp.exe
4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid: S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank youHi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy -
Why are my current calls being interrupted by new calls?
Why are my current calls being interrupted by new calls?
I'm using iPhone 6 plus and reset my network settings multiple times. The issue is random.glic1 wrote:
Why are my current calls being interrupted by new calls?
I'm using iPhone 6 plus and reset my network settings multiple times. The issue is random.
Are you saying when your on a phone call and someone else calls you it does what exactly? Disconnect your current call with the new call? -
I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
Hello,
I am here because I have exhausted my Coldfusion/Java ssl keystore certs trouble shooting abilities. Here is the issue. I am developing a Coldfusion 11 application that must make api calls to Chase payconnexion SOAP services. I am using the coldfusion cfhttp tags to do this, which is using the java jre 1.7.x to accomplish this. The problem, I am getting generic 500 internal server errors from Chase. They claim that I am not sending a cert during the ssl exchange. What I have done is:
- put our wildcard cert/key pair in the coldfusion keystore
- put our root and chain in the keystore
- put the chase server cert in the keystore
- converted the key/crt files to .pfx and make the calls
to chase with those, something like:
<cfset objSecurity = createObject("java", "java.security.Security") />
<cfset storeProvider = objSecurity.getProvider("JsafeJCE")/>
<cfset Application.sslfix = true />
<cfhttp url="#chase_api_server#/"
result="http_response"
method="post"
port="1401" charset="utf-8"
clientCert = "#cert_path#/#cert_file1#"
clientCertPassword = "#cert_password#">
<cfhttpparam type="header" name="SOAPAction" value="updateUserProfileRequest"/>
<cfhttpparam type="header" name="Host" value="ws.payconnexion.com" />
<cfhttpparam type="xml" value="#trim(my_xml)#"/>
</cfhttp>
Here is what I see in the Cf logs, can anyone help me interpret what
is happening ??
Thanks,
Bob
=============================================================
found key for : 1
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>7]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [ <snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
trustStore is: /opt/coldfusion11/jre/lib/security/cacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
<snip 85 certs>
trigger seeding of SecureRandom
done seeding SecureRandom
Jan 23, 2015 13:15:37 PM Information [ajp-bio-8014-exec-7] - Starting HTTP request {URL='https://ws.payconnexion.com:1401/pconWS/9_5/', method='post'}
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_128_CBC_SHA256
Allow unsafe renegotiation: true
Allow legacy hello messages: true
Is initial handshake: true
Is secure renegotiation: false
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1405197529 bytes = { 191, 115, 95, 85, 79, 234, 145, 176, 62, 70, 36, 102, 168, 15, 127, 174, 88, 118, 4, 177, 226, 5, 254, 55, 108, 203, 80, 80 }
Session ID: {}
Cipher Suites: [TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS_ECDHE_RSA_WITH_RC4_128_SHA, SSL_RSA_WITH_RC4_128_SHA, TLS_ECDH_ECDSA_WITH_RC4_128_SHA, TLS_ECDH_RSA_WITH_RC4_128_SHA, TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_RC4_128_MD5, TLS_EMPTY_RENEGOTIATION_INFO_SCSV]
Compression Methods: { 0 }
Extension elliptic_curves, curve names: {secp256r1, sect163k1, sect163r2, secp192r1, secp224r1, sect233k1, sect233r1, sect283k1, sect283r1, secp384r1, sect409k1, sect409r1, secp521r1, sect571k1, sect571r1, secp160k1, secp160r1, secp160r2, sect163r1, secp192k1, sect193r1, sect193r2, secp224k1, sect239k1, secp256k1}
Extension ec_point_formats, formats: [uncompressed]
Extension server_name, server_name: [host_name: ws.payconnexion.com]
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 191
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 81
*** ServerHello, TLSv1
RandomCookie: <snip>
Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA
Compression Method: 0
Extension renegotiation_info, renegotiated_connection: <empty>
%% Initialized: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
** TLS_RSA_WITH_AES_256_CBC_SHA
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 4183
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Feb 07 18:00:00 CST 2010,
To: Fri Feb 07 17:59:59 CST 2020]
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 10
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[4]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[5]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3-g5.crl]
[6]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[7]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[8]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[9]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
CN=VeriSignMPKI-2-7
[10]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Tue Nov 07 18:00:00 CST 2006,
To: Sun Nov 07 17:59:59 CST 2021]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
codeSigning
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[8]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
Found trusted certificate:
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 13
*** CertificateRequest
Cert Types: RSA, DSS
Cert Authorities:
<Empty>
*** ServerHelloDone
matching alias: 1
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
<snip>public exponent: 65537
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 3970
SESSION KEYGEN:
PreMaster Secret:
<snip>
CONNECTION KEYGEN:
Client Nonce:
<snip>
Server Nonce:
<snip>
Master Secret:
<snip>
Client MAC write Secret:
<snip>
Server MAC write Secret:
<snip>
Client write key:
<snip>
Server write key:
<snip>
Client write IV:
<snip>
Server write IV:
<snip>
*** CertificateVerify
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 262
ajp-bio-8014-exec-7, WRITE: TLSv1 Change Cipher Spec, length = 1
*** Finished
verify_data: { 51, 254, 40, 56, 247, 218, 130, 183, 112, 239, 95, 4 }
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 48
ajp-bio-8014-exec-7, READ: TLSv1 Change Cipher Spec, length = 1
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 48
*** Finished
verify_data: { 89, 182, 137, 178, 177, 31, 27, 115, 151, 90, 169, 49 }
%% Cached client session: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
ajp-bio-8014-exec-7, setSoTimeout(60000) called
ajp-bio-8014-exec-7, WRITE: TLSv1 Application Data, length = 1520
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 128
Jan 23, 2015 13:15:38 PM Information [ajp-bio-8014-exec-7] - HTTP request completed {Status Code=500 ,Time taken=1302 ms}
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 256
ajp-bio-8014-exec-7, READ: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, RECV TLSv1 ALERT: warning, close_notify
ajp-bio-8014-exec-7, called closeInternal(false)
ajp-bio-8014-exec-7, SEND TLSv1 ALERT: warning, description = close_notify
ajp-bio-8014-exec-7, WRITE: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, called closeSocket(selfInitiated)
ajp-bio-8014-exec-7, called close()
ajp-bio-8014-exec-7, called closeInternal(true)Ok, apparently Chase person who said we were not sending the certs and achieving mutual auth
was incorrect. The https calls were connecting, and mutual auth was taking place. The 500
error was about a soap envelope being delivered, and NOT SSL as I directed to. Everything
is working fine now.
Thanks,
Bob -
Call of Duty with i915GM loki installer, not starting
Hey,
I just installed Call of Duty with the loki installer from liflg.org.
But when i tried to run i get this error
COD 1.3 build win-x86 Mar 2 2004
----- FS_Startup -----
Current language: english
Current search path:
Z:\home\jordz\Games\CoD\main\pakb.pk3 (60 files)
Z:\home\jordz\Games\CoD\main\paka.pk3 (41 files)
Z:\home\jordz\Games\CoD\main\pak9.pk3 (149 files)
Z:\home\jordz\Games\CoD\main\pak8.pk3 (235 files)
Z:\home\jordz\Games\CoD\main\pak6.pk3 (3 files)
Z:\home\jordz\Games\CoD\main\pak5.pk3 (4858 files)
Z:\home\jordz\Games\CoD\main\pak4.pk3 (1668 files)
Z:\home\jordz\Games\CoD\main\pak3.pk3 (1992 files)
Z:\home\jordz\Games\CoD\main\pak2.pk3 (694 files)
Z:\home\jordz\Games\CoD\main\pak1.pk3 (2642 files)
Z:\home\jordz\Games\CoD\main\pak0.pk3 (12816 files)
Z:\home\jordz\Games\CoD/main
Z:\home\jordz\Games\CoD\main\localized_english_pak5.pk3 (46 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak3.pk3 (7 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak2.pk3 (9 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak1.pk3 (3736 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak0.pk3 (1204 files)
localized assets pak file for english
File Handles:
30160 files in pk3 files
execing default.cfg
couldn't exec language.cfg
couldn't exec config.cfg
couldn't exec autoexec.cfg
========= autoconfigure
configure.csv: using configuration 800 cpu MHz 256 sys MB 64 vid MB
execing configure.cfg
fs_basepath is write protected.
fs_homepath is write protected.
Hunk_Clear: reset the hunk ok
...detecting CPU, found Intel Pentium III
Measured CPU speed is 0.87 GHz
System memory is 472 MB (capped at 1 GB)
Video card memory is 64 MB
Streaming SIMD Extensions (SSE) supported
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
Initializing OpenGL subsystem
...initializing QGL
...calling LoadLibrary( 'c:\windows\system32\opengl32.dll' ): succeeded
...setting mode 4: 800 600 FS
...using colorbits of 32
...calling CDS: ok
...registered window class
...created window@0,0 (800x600)
Initializing OpenGL driver
...getting DC: succeeded
...GLW_ChoosePFD( 32, 24, 8 )
...0 PFDs found
...hardware acceleration found
...PIXELFORMAT 1 selected
...creating GL context: succeeded
...making context current: succeeded
Initializing OpenGL extensions
GL_VENDOR: Tungsten Graphics, Inc
GL_RENDERER: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
GL_VERSION: 1.3 Mesa 6.5.2
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_cull_vertex GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_3DFX_texture_compression_FXT1 GL_APPLE_client_storage GL_APPLE_packed_pixels GL_ATI_blend_equation_separate GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SUN_multi_draw_arrays
----- CL_Shutdown -----
RE_Shutdown( 1 )
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): success
...deleting GL context: success
...releasing DC: success
...destroying window
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Hunk_Clear: reset the hunk ok
Your video card appears to be missing one or more features required to run Call of Duty.
You should install the latest drivers for your video card, being sure to uninstall the old drivers first. If you already have the latest drivers, you should completely uninstall the drivers and then reinstall them. This fixes most problems. If the game still doesn't work, it may be that your video card does not have the minimum features required. Please check the readme for more information, including a list of supported video cards.
But i got direct rending and i tried to install the mesa-git and libgl-dri-git packages from AUR, but that didn't help.
Can somebody push me in the right direction?
Thanks
Edit:
I get this output when running codsp:
fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x166100) : stub, simulating 64MB for now, returning 64MB left
fixme:ddraw:IDirectDrawImpl_SetCooperativeLevel (0x165328)->((nil),00000008)
fixme:d3d:IWineD3DStateBlockImpl_Release Releasing primary stateblock
fixme:keyboard:RegisterHotKey ((nil),0,0x00000001,9): stub
fixme:keyboard:UnregisterHotKey ((nil),0): stub
Last edited by jordz (2007-04-11 21:48:47)When he installed the new fibre hub, did he use his laptop to take settings off old white hub and put it on new one?... way to check is dial into the hub ( 192.168.1.254 ) go to setting and then wireless, and see if the hub name and key are the same that is printed on card and back of hub....as this could be your problem...one thing to try is set the new hub back to default ( you will have to reconnect anything that uses wireless ) and see if this sorts it out.
-
Music CDs are being rejected by my PowerBook G4
I have the latest OS version, the latest iTunes, etc. I never had problems loading and playing music CDs in the past, or uploading music from my CDs to iTunes.
Last week I bought some new CDs and all are being rejected by my Mac--they make a lot of noise trying to load, and then spit back out. I tried my old music CDs, one's I have previoulsy played with no problem and loaded, and they too will not work.
The CD drive does not seem to be the problem, as data disks, sofware disks, and BURNED music CDs WILL play with no problem
Cany anyone shed some light on this? What is going on? I'd think it was the copy protect thing on some CDs, but even my old music CDs are not being accepted into my compute. Has iTunes done something to reject music CDs?
Help!Thanks for reposting the link.
Unfortunately, that doesn't address my problem. (Fortunately, however, my problem is not as severe as the one in that link!)
My problem manifests itself as some CD's not mounting: the Superdrive spins and makes noises for a while, then ejects the CD.
As far as I can tell, this happens only with one company, and only/primarily with more recent CD's. (Not sure about this, but I think some older CD's from that company that used to work no longer work after I inserted a fairly recent CD.)
I am sure it is related to some copy-protection scheme, but I can't find any files (visible or invisible) that the CD deposited on my Mac.
Any suggestions on what to look for?
Thanks. -
Hi,
I have tried to send emails using my iPad 3G from New Zealand back to the UK,some are getting through, but others are being returned with the following massage. Cna anyone help? thanks
Subject: Re: Mail delivery failed: returning message to sender
On 21 Jan 2011, at 06:59, Mail Delivery System
<[email protected]> wrote:
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
retry time not reached for any host after a long failure periodIf u r sending via your ISP email account using SMTP then try sending via web email (or visa versa). You could also try setting up an alternative SMTP in your mail application. A lot of web email accounts let u use an email client with pop/smtp settings. For example, I have 3 email accounts one of which is with my ISP the other 2 r web based one of which is yahoo. I do not use the yahoo outgoing SMTP though but rather my ISP's. Still think it is probably BT Yahoo giving grief though
Maybe you are looking for
-
Transcation and xa connections
Hi, Once I declare a stateless session bean to use container managed transcations, the XA resources I will be using will be automatically initialized to use a global transcation right? For example, I allocated a XA connection, and allocate a JMS queu
-
How to copy one application to a new workspace in the same HTMLDB instance?
Hi, I have an application running in production and I need to duplicate it into another workspace in the same instance, using another db schema with imported objects from the original one, as my area here has just been split in two and now we need tw
-
My iPad2 "could not be found on the network" and won't sync
Please Help! My iPad 2 won't sync and doesn't seem to be "seen" by my PC. I have rebooted, restored and reset the iPad, and installed latest ios. PC is running Windows 8 with latest iTunes whic has been re-installed. The USB port and cable work fin
-
Running iTunes from an external hard disc, deleting songs on local disc
I've moved my iTunes library to an external hard disc, so I could free up room on my Macbook Air. Everything seemed fine, so as a test, I deleted 1 song from the iTunes media file on my Air, and then tried to play it from the external disc. I get the
-
DBMS_RLS를 이용한 FINE GRANED ACCESS CONTROL (FGAC)의 개념 및 사용방법 (8I ~ 10G)
제품 : ORACLE SERVER 작성날짜 : 2005-11-23 DBMS_RLS를 이용한 FINE GRANED ACCESS CONTROL (FGAC)의 개념 및 사용방법 (8I ~ 10G) ===================================================================== PURPOSE 여러 사용자가 같은 테이블을 조회하더라도, 각 사용자마다 자신의 정보만을 표시해 준다거나, 특정 시간 범위 내에서는