Camera won't run.

Hi, I purchased the 5800 today and everything was working fine. However now whenever I press the camera button or choose to run the camera through applications the phone is unresponsive. I have reinstalled the firmware twice but this hasn't made any difference. If anyone has any advice on how to fix this problem I'd be extremely grateful. Thanks.

here are some options you might want to try. make sure you do a back up of all your stuff as you will lose it if you decide to continue beyond option 1. the default code is always 12345 and make sure you remove your memory card if you chose to try any of these. if nothing works then i suggest you take it back for exchange
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
2. *#7370# - Reformat your phone
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

After last update, flash won't run, camera won't work, slow slow slow!

After the recent update, my camera won't work, can't do facetime or video in ichat. Also shockwave and silverlight plug ins won't work so can't watch youtube or netflix. On reboot my laptop is EXTREMELY Slow!
help?

Hi hadleyoil, and a warm welcome to the forums!
Thanks for the report(s).
That is generally the best cure, just be sure to Repair Permissions before & after any update!
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

Add-on won't run on some clients

As soon as an add-on users de DI SDK, it crashes at startup on some systems and I don't know why.
I'm using the DI Basic Operations example that came with the SDK. I build it, and used the SAP B1 SDK setup .NET Wizard to create the installer and licence file. The istallation goes fine, but the addon itself crashes. with a useless "the program has performed an illegal operation and will be shut down" error message (see below)
I also tried other ways to run the add-on (among others directly from visual studio or from the command line, with the developer licence number as argument) but allways with the same result. At one system all goes well, at the other a crash occurs even before the debugging can start.
I have no idea what this error message is trying to tell me:
System.Runtime.InteropServices.COMException (0x80040154): COM object with CLSID {A355004F-AAB4-41D3-BDE0-7EAED1ED5FFF} is either not valid or not registered.
   at Project1.BasicOperations.InitializeCompany()
   at Project1.BasicOperations.BasicOperations_Load(Object eventSender, EventArgs eventArgs)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Most of the time however, I get a much less helpfull error saying there was some unidentified illegal operation.
Something that is possibly related is a problem with the references. On a PC where the add-on crashes I don't have the SAP DI as reference in the .NET and COM tabs, only the SAP UI. When I open an example the DI reference is reporting an error (not found) , but when I add the reference as a file, all is well. (The project now compiles with no errors or warnings, it still crashes when I start it.
The problem already occured when only SBO was installed (which should be sufficient to run the add-on? You don't need to have the SDK installed I presume). I installed the SDK and later even Visual Studio, but this didn't help.
I've reinstalled SBO several times (I even deleted the sbo program files directory before installing SBO again) but this didn't change anything.
(I'm using 2004a)
Does anyone know what could cause this problem?

I know that, but that didn't help.
Is there any way to find out which versions of the DI API a SBO client is currently using?
We've re-installed the clients and DI API using the shared folder on the server, but that didn't help. (maybe some old dll was locked and couldn't be removed (without any notice of that happening) and is still being used?)
One system indeed didn't have the DI API installed and the problem was solved a bit (my own plug-in now works fine, but the "DI basic operations" example of the SDK crashes when connecting to a company database.)
We've now got 3 machines running my add-on without any problems (the server and 2 notebooks) and 1 notebook who won't run my add-on at all.
The DI basic operations Example of the SDK won't run on any of the notebooks, only on the server.
On one notebook it crashes when I click "choose company DB" (which should give me a list of available companies) on the other notebook it crashes when I try to connect to a (any) specific company database and on the third notebook it gives an empty list and won't connect to anything (but doesn't crahs)
this is all 100% reproducable.
All machines run the SBO client and UI add-ons perfectly, only the DI seems to cause problems.
another weird problem that might be related, is that I need to compile my add-on as "debug". When I compile it as "release", it won't run on any of the notebooks, only on the server.

Lightroom 5.6 won't run on Win 7 6 after upgrade through CC

Upgrading Lightroom to 5.5 stopped it from running. I found a fix on the net and moved on.
Now. Lightroom 5.6 has just upgraded and now it won't run. Also, I cannot find a fix - new or old.
This is very frustating..
Please help

Installing the standalone version just postpones the problem until you install the cloud version, again.
The SLCache folder has bad data in it that confused LR 5.5 and again LR 5.6 until it was cleared, via Solution 4 on this page. Of course there could be other issues, so trying each of the solutions in order could be useful, but Solution 4 is the one that finally worked for me, with LR 5.5 on my home computer, and LR 5.6 on my work computer, where I'd installed the standalone 5.5 to bypass the issue and it came back with LR 5.6:
Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update
Once you remove the contents of the SLCache folder other Adobe programs will ask to be relicensed like Elements via a serial number or the cloud programs by logging in, but that is just once after you clear it not each time.

Captivate 5.5 - SCORM Project won't run after Captivate 7 installation

Good afternoon,
I had completed a Captivate 5.5 project for a few months and as of about a month ago I have had Captivate 7 installed on the machine. Due to some widgets that are implemented in the project that only run in 5.5, I have not used Captivate 7.
I also have not had cause to reopen the project until recently to make some changes. However, now when I publish the files, package them in the MultiSCO Packager, and put them in CMS - it won't run.
I've verified that the CMS is not the issue: if I repost the pre-Captivate 7 version it works just fine and the only changes I made to the original files were cosmetic and minor.
Now when I republish the files in 5.5 and package them, the files look different, publishing all of the zips into a "Linear" subfolder. I couldn't help but notice that this is the same as Captivate 7 publishes except without any accompanying XML files. Why would Captivate 5.5 be affected by Captivate 7 being updated on the machine?
Is there any solution to this other than having to open the 5.5 files in 7 and replace every widget? This is a huge expenditure of time when I was under the impression that if 5.5 was still installed it would run completely independent of the Captivate 7 changes.
Any help would be appreciated,
Jaimeson

Don't be too quick to write off the LMS/CMS as the issue. You need to be aware that with Cp6 Adobe totally revamped their SCORM drivers so there is now little similarity between output of 5.5 to 7 in this area. It is also no longer possible to use Cp7 SCORMs in the Cp5.5 era Multi-SCORM Packager tool. They are not compatible. You must make sure the CP7 SCORMs are matched with the Multi-SCORM Packager that came with Cp7.
Once you get compatible SCORMs published, try uploading them to SCORM Cloud LMS to test. If they work fine on SCORM Cloud then they should work on your CMS (if it is truly SCORM compliant).
Your issue with the widgets not working in Cp7 might be resolvable if you update the widgets. Have you checked with the original widget developer to see if they have updates available? If you have several widgets of the same type and version in each project file, then there is a trick to updating all of them in one go (per project file).
See the heading in the lower part of this page:
http://www.infosemantics.com.au/adobe-captivate-widgets/widget-updates
But be warned that this only works if the widget filename is exactly the same, and you are doing this from the same computer that was used to originally insert the same widgets, because the path to the external widget file must be replicated.

ITunes won't run after downloaded.

I downloaded iTunes to Windows XP successfully, but it won't run when I attempt to open it. Nothing happens. My iPod should arrive in a week and I want to have iTunes prepared to transfer songs ASAP!
Why won't iTunes open after I've successfully downloaded it??!!

...ok, I downloaded iTunes 6.0 and it worked fine until my iPod cam and it said I needed version 7.0 or higher to transfer songs[thanks a lot apple].

Java won't run

I think I may have got a virus on my computer. My java won't run at all. When I put on the Flashback Checker it said it was clear but I still can't run java or update it. I'm on an OSX so the new updates won't go either. I'd really like to run java programs

ahuken wrote:
I went to about this Mac. Do you know where I can download java?
It came with 10.5.8 and is updated using Software Update.
All you need to do is make certain it's enabled in both Java Preferences (found in /Applications/Utilities/) and in your browser preferences.

Powerbook Ti Gig Ethernet won't run on battery

After killing a brand new battery, I opened my TiBook and found that the battery connector was loose. Tightened that down and , while I was in there, replaced the PRAM/Battery, but the computer still won't run on the battery. Bought another battery, and it recognizes a battery is there, and reports that it's 76% full, and the power connector is orange, and the computer reports it's calculating the time until full. But it never is able to calculate a time, and if you disconnect the power, the computer immediately shuts down.
Have reset PMU, NVRAM, PRAM, etc. etc., no change in symptoms.
Any other suggestions??

Hmmm. OK, I withdraw the previous suggestion. Let's assume the battery is OK. But clearly, although the Powerbook "sees" it, and therefore it is at least partly connected to the Powerbook, it isn't able to deliver power to the machine in whatever way is necessary to make the machine run. Because you've already had occasion to tinker with the battery connector, I suspect there may still be a fault there: one bad contact, a broken wire, or something similar. How about diving back in and making sure all the battery contacts inside the compartment are clean and undamaged, and that the connector from the battery to the logic board is securely seated.
If that investigation yields no clues and the issue remains, you may have a faulty Power Management Unit on the logic board. I doubt that a faulty AC adapter or a faulty DC-in card (the other two components of the charging and power systems) could prevent a healthy Powerbook from running on battery power with a healthy new battery in place.
I'm not sure how thoroughly, if at all, the Apple Hardware Test disc that came with your machine is able to test the power management system. Try running it and see whether anything shows up. Post back with results.
Message was edited by: eww

Powerbook won't run off of battery - requires PMU reset to power up with AC

Like everyone else posting here, my powerbook won't run from the battery. I have two batteries, one that came with the computer 3 - 4 years ago and a newer one that I purchased about 1 year ago. When I am plugged into AC using iStat Nano the newer battery shows cycles 173, health 89%. The older battery show cycles 0 and health 100% (go figure!). Both batteries just say 'calculating' on the tool bar battery meter. The light around the AC adapter plug always shows green as if the batteries are fully charged.
Here is where my post differs from the others. Once I shut down the computer I can't power it up again with reseting the PMU. I've tried reseting NVRAM and deleting and re-establishing the powermanagement plist as suggested elsewhere on this forum to no avail.
Is the PMU something that can be replaced? How is it related to DC-IN? I've read elsewhere here that is another problem that could cause these symptoms. Has anyone had these two components repaired and did it fix the problem? How much did it cost?
Thanks in advance for any information you can give men.

I had the same experience. I have 10.4.10 on the cloned drive but the battery is still not charging. I decided to take a closer look at the battery updater instructions and discovered that even though I am at 10.4.11 on my Powerbook the BatteryUpdater.bundle was at revision 1.1.3 and hadn't been updated since Jan 6, 2006. So I downloaded the BatteryUpdate that is posted at the top of this forum and installed it. It has made no difference in the operation of the computer. The AC adapter still isn't charging the battery although the green ring light is on which usually indicates the battery is charged. furthermore, when I go back and look at the date and version number on the BatteryUpdater.bundle they haven't changed. Who knows what the update actually changed! There is no mention of it running in the software update log. My system profiler says:
The battery is installed
Full charge Capacity 3890
Remaining Capacity 0
Cycle Count 173
AC adapter cannot charge battery: YES
By the way, my battery is a replacement battery.
I have just about exhausted all my option other than taking it into an Apple repair store and I'm not sure at this point I want to give Apple any more of my money. I am going to live with it the way it is for a while in the hopes that someone will post a fix for the problem. Good luck with your investigation. If you find out anything else please post it here as I will check back on a regular basis. If I find out anything else I will do the same. Nice working with you.

Flash Drive Won't Run, Why??????

My question is not about Cloud, but your Flash Player as it's not on your list of products, I used this. I installed it to use my web cam to take photos and file them for furture us and to attach to CV,s. It's installed, my computer says it's installed,
but it won't run and it has locked out any other use of my web cam. Why????

To help troubleshoot we'll need the following system information:
Operating system
Browser
Flash Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this can be found here:
Windows
Mac
Thanks,
Chris

Certain applications won't run

Certain applications won't run. Mail, Safari (I'm sending this with Firefox), and now Installer. The disc now verifies although I had to repair the disc earlier. This started when trash-emptying wouldn't complete. Disc Utility from the Tiger install disc found what it called a minor error - a file that was a little too big (don't remember the file) and free space a little too small. Here's the crash log when I try to run the 10.4.10 PPC combo update - after a hint I got in another thread about a problem like this. I believe the same file is mentioned for any of the apps that won't run. If you have any ideas how I should proceed, please let me know. Thanks, Joe
===== Sunday, November 4, 2007 2:01:07 AM US/Pacific =====
dyld: NSAddImage() error
dyld: Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
Reason: no suitable image found. Did find:
/System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore: unknown file type, first eight bytes: 0xCA 0xFE 0xBA 0xBE 0x00 0x00 0x00 0x02 /System/Library/Frameworks/WebKit.framework/WebKit
Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: Installer crashed
Nov 4 02:01:39 joe-diederichs-powerbook-g4-15 crashdump[351]: crash report written to: /Users/joed/Library/Logs/CrashReporter/Installer.crash.log

Joe Diederichs wrote:
How bad is it to try to install the combo update from the Terminal? Thanks, Joe
Well, it's this bad:
First off, a disclaimer. I didn't think of this, and I've not tried it from the DVD, though I did check the commands on a booted system. But it looks like it should work to me.
Okay, to use Terminal on the DVD, do this:
First, open up the disk image for the updater and copy the ".pkg" or ".mpkg" file onto your desktop, since that's an easy place to find it. Eject the disk image and make sure the package file stays on the desktop. Make a note of the package's exact name, including capitalization. You'll need it later. Now, open the Terminal on your Mac and type the following:
cd ~/Desktop; pwd
Write this path down somewhere, and keep in mind that case counts. It'll be something like "/Users/username/Desktop".
Now, take a look at the name of your hard drive. It's most likely something like "Macintosh HD". The main thing is to note any spaces in the name and note the name. I'm not sure whether auto-complete, and all the other good stuff, works in the Terminal on the DVD, so it's best to write these things down.
Now, boot from the Tiger Installer DVD and open up the Terminal app from the "Utilities" menu. Now, you need to construct a command to open up the installer package for the update package. Here's how it should look (without customization):
"/Volumes/Macintosh HD/usr/bin/open" -a /Applications/Utilities/Installer.app "/Volumes/Macintosh HD/Users/username/Desktop/MacOSXUpdCombo10.4.10PPC.pkg"
A couple of things to note: first, the quotes around the first part are necessary because of the space in "Macintosh HD", same with the last part. Also, it's possible that the installer will open up the OS X installer package from the DVD as well. Just be really sure you're installing the update and not the full OS. Also, make sure you customize the username in the last part, just before "Desktop".
Finally, if you've installed any updates after the 10.4.10 update (especially security updates), it's possible that the problem with the WebKit will not be fixed, since the 10.4.10 combo installer may not install the older version of the WebKit over the newer one. In that case, you might have to do the other updates that came after 10.4.10 to eventually get back to where you should be. And all this might be in vain if some other critical file is damaged, but hasn't been updated since 10.4.0.
charlie
P.S. -- Like I said before, I haven't tried this, and didn't even think of it. I found the general procedure at, of all places, the Washington Post web site in the comments to a blog entry. Look down toward the bottom.

Equium A210-171: CD won't run and ODD error code 19

Hi,
I was trying to run a cd that came with my sony walkman but the cd won't run
So i went to Device Manager and noticed that there's a yellow info triangle in front of the: TSSTcorp CDDVDW TS-L632H ATA Device
There's a messege when i try to update the driver
(Windows cannot start this hardware device because its configuration info ( in the registery ) is incomplete or damaged (Code 19)
Any sugestions please?
Is there a free driver scanner and repair tool maybe?
Thanks in advance
Message was edited by: sounds

Hi,
I don't want to destroy anything so not touching it untill i know
I just want to know if i should uninstall that TSSTcorp CDDVDW TS-L632H ATA Device
Then do the registery part
But considering i can't update the TSSTcorp CDDVDW TS-L632H ATA Device
And i can't get the fix it thing to work, if i uninstall the TSSTcorp CDDVDW TS-L632H ATA Device
Then delete those registery entries, how will it be reinstalled.
Message was edited by: sounds

Camera won't capture credit card for Apple pay

When I attempt to use the little blue camera icon option in Apple Pay to capture a credit card and it's info, nothing happens. The camera won't capture a picture of my credit card. I hold my phone camera hovering very still over my credit card making it's sure it's within the guideline over and over and nothing happens.
I know my bank and my credit card support Apple Pay.

Hi ...
Make sure your iPhone is updated to iOS 8.1
Tap Settings > General > Software Update
If it's already running 8.1, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings then try again.
Instructions for setting up Apple Pay > Apple Pay

HT6114 Camera Won't Turn Off

Just downloaded the OS X Mavericks v10.9.2 update and now the camera won't turn off! (green light is on constantly) and FaceTime still doesn't not connect. FaceTime says camera is not available, even though now the green light is on all the time. Any Suggestions? Have restarted twice with no luck.

This procedure may show which program is using the camera. It makes no changes, and therefore will not, in itself, solve your problem.
If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Please triple-click anywhere in the line below on this page to select it:
sudo lsof -Fc +D /L*/Cor*/*/*/AppleCamera.plugin | sed '2!d' | cut -c2- | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.

Camera won't run.

Similar Messages

Maybe you are looking for