Camileo X400 wont recognise SD card

I bought an X400 yesterday form Argos (UK) and it will not recognise that I've put an SD card in it. I have 2 x 2GB SD cards. One is Sandisk and one is Toshiba. I had already ordered a newer 16GB card which is on the way but if it doesn't work I'll be taking it back for a refund and buying a different brand.
Could anyone shed any light as to why it doesn't recognise it?
On a side note..I found it very frustrating that the description says 'One touch Youtube upload' when it is anything but. You have to install software and I assume plug your camera into the PC to upload :/

I am having the exact same problem. I purchased the Camileo X400 on-line through JB Hi-Fi for my wife to take overseas at the end of this week. As it only has a fairly small hard-drive (128mb), I purchased 2 x 16GB Sandisk Class 10 Fast SD Cards. I put one in and started to record. The "memory full" message came up after around 45 seconds. I then started to hunt for some sort of switch, either physical or on the touch-screen that would swap my recording over to the SD card. Couldn't find anything. The "user manual" is next to usless. Our son has a small non-descript generic HD Camcorder that he bought at some flea-market somewhere, so we put the SD card in that, and it worked perfectly. I took the Toshiba camera and the SD card to our local JB Hi-Fi store for some advice. The customer service officer said that the particular SD card I had was "too slow" for this camera, and that I should return the SD cards to where I purchased them from and ask for the "Ultra" or "Extreme" cards, as they are "faster". That sounded ok to me. I thought that seeing the "Fast" cards worked in our son's camera, he might as well use them, so I purchased another 2 x 16GB "Extreme" SD cards from JB Hi-Fi. Took them home, and guess what? Exactly the same message. I tried to contact Toshiba Support, but they have nothing for Camcorder owners. I don't know whether I have a dud camera or not. I will have to now return to the JB Hi-Fi store I got the "Extreme" SD cards from and go through the whole exercise again. At this rate I think my wife is going to have to take our son's little generic camera, and hope for the best. Very disappointing.

Similar Messages

PC wont recognise sd card ZOII7

I have been able to download some videos to my SD card
but for some reson my pc will not recognise it, when I drag
and drop or copy and paste from my pc to the sd card
it says insert sd card

The ziio has issues recognizing the class 4 sd card. I had that issue earlier and send in my ziio and microsd card for testing. When I got my card back, the cso acknowledged that there is an issue and the firmware team is currently looking at a fix for this issue. Hopefully the fix is made available soon in the next update

HT3939 I updated iphone 3G to latest software and since then it doesnt recognise sim card and wont restore, any thoughts yall? iPhone 3G, iOS 5.1

I updated iphone 3G to latest software and since then it doesnt recognise sim card and wont restore, any thoughts yall?
iPhone 3G, iOS 5.1

Turns out restarting my mac fixed it.

[ PROBLEM ] Audio Control app wont recognise card properly

Hi
I have a X-Fi ExtremeGamer card in my Win 7 home premium setup and am struggling to set it up properly.
Long story short , I pulled out the X-Fi card and tried the onboard audio as I was getting an issue with the audio playing around using the creative drivers ( volume changes mid song, positional audio in games was often unusal ).
The Realtek stuff wasnt too bad but I wanted to try my X-Fi card again, it is suppose to be better after all.
Anyways...
I disabled the onboard audio , safe mode and cleaned all the realtek drivers out and any lingering creative drivers with Driver Sweeper, used CCleaner to clean up the reg and rebooted.
Installed the BETA drivers from creative and the audio works fine, but when I try use the crystaliser or other SB features the app complains
" The audio device supported by this application is not detected. The application will exit. "
I installed Daniel_K's drivers from a CD ISO he put out a while back, and the applications worked fine but the audio dropped in and out, so I downloaded the official creative drivers for my card and OS, and the application worked fine again but as with Daniels drivers the audio dropped in and out so I reverted to the beta drivers... and the audio dropped in and out as well.
I worked it out to being the volume controls on the creative 5. speakers , which every set of speakers I have bought from creative have had the same issue, the volume slider on the cable... after some use it messes up the audio and it becomes safer just to adjust the volume in the software.
After deciding the issue was with the volume slider on the cable, I wanted to re-install Daniel_K's driver pack so I could access the other features, now it suddenly doesnt recognise the device anymore, nore does the official none beta drivers from creative, nor does the latest PAX drivers ... all report the same issue:
" The audio device supported by this application is not detected. The application will exit. "?
I am starting to tear my hair out here, the audio works and the card is recognised in the Device Manager as 'Creative SB X-Fi' , I have clean the drivers , the registery , used the patch that fixes a bug where the update wouldnt recognise cards properly , re-re-re-re-re-re-re-re-re-re-re-re installed the drivers.... carefully EACH time.
I triple checked I was downloading the Win 7 64bit OS ver of the X-Fi ExtremeGamer drivers.
What now ?
ALSO Who thought it was a bright idea to put up the volume to 87% when you install drivers ? It also unmutes the volume if you mute it before restart, and it puts the volume back up to 87% if you dare to lower the volume before rebooting the PC to complete the install.
( NOTE: It only does this after the initial reboot to complete the install, subsequent re-boots leaves the volume alone )

I give up...
I sent a form to the tech guys , detailing the problem and outlining the steps I took to fix the issue...and they direct me to http://support.creative.com/kb/ShowA...aspx?sid=55438?, oh I can use Device Manager to uninstall , oh and Control Panel - Programs to unistall the Creative stuff ( note: I am being very sarcastic here ).
This is the information I sent the tech:
Detailed Problem Description:
Creative audio application does not recognise SB X-Fi card , card audio functions just cant control the feature set. Error msg : " The audio device supported by this application is not detected. The application will exit. " Suspect nVidia installing of HD audio drivers causing 4 (four) additional High Definition Audio Devices to appear in the device manager screen. Unable to uninstall these devices as Win7 auto re-reinstalls with generic MS drivers, can only disable. Creative SB X-Fi card listed in audio devices as 2 - SB X-Fi. Suspect the audio control application looks in the first slot and doesnt recognise the device and fails, doesnt look at the 2 ( second slot ? ) Tried a full uninstall including going to safe mode and removing drivers with Driver Sweeper, CCLeaner to clear out registry entries and removed the card, booted to windows without the card , re-seated the card and re-installed the drivers. Forum entry for this problem at: http://forums.creative.com/t5/Sound-Blaster/PROBLEM-Audio-Control-app-wont-recognise-card-properly/td-p/57930
Thank you
and this is the advice I got ...
Thank you for contacting Creative Labs.
To avoid installing the incorrect driver on your soundcard, we suggest that you do a full uninstallation using the guidelines, steps provided in our website. Shutdown your PC then take out the card and make sure to place it on another slot. Second, disable your onboard audio and if your graphic card comes with any audio support as well, disable this feature.
Uninstalling Sound Blaster Drivers and Applications(Windows 7)
http://support.creative.com/kb/ShowA...aspx?sid=55438
Do not hesitate to add as much information in the next reply so we can understand the entire issue and assist you find the right solution or suggestion.
Best Regards,
... seriously ?

Mac Pro wont recognise my sound card - tascam us122

Hi
My Mac Pro wont recognise my sound card - tascam us122. I have tried reinstalling. I seem to remember having this problem with my macbook pro but cant remember how the issue was resolved!
Any ideas?

Sorted now - updated drivers.

I connected my new iphone 4 to itunes but now it wont recognise my old 3gs. My name doesnt appear on the left. i want to transfer all my songs to my new one but cant sync now. can anyone help

i connected my new iphone 4 to itunes before backing up my old one but now it wont recognise my old 3gs. My name doesnt appear on the left. i want to transfer all my songs to my new one but cant sync now. can anyone help

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Itunes wont recognise my iphone 5

Ive just got my iphone 5 back from being serviced and tunes wont recognise my 'fixed' iphone 5s. All my data was backed up to itunes on my pc and i need to restore it to the phone. Help!!!!

does it show up in my computer as a camera or not at all?
have you tried connecting to other computers to see if it's detected there to verifcy that the conector is not damaged and causing the device not to be recognized by the computer?

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

NEW MACBOOK AIR WONT RECOGNISE AIRPORT

I have a new MacBook Air - have spent 7 hours trying to get it to recognise and link to my AIRPORT and still no joy . I have my old MACBOOK PRO linked up, no problems ,and I have mirrored all the settings but the new one still cant find the AIRPORT and on the odd occasion that it does , it eventually times out .
Have re-set the AIRPORT and done everything that the Apple Tech Man advised but nothing doing - feel like throwing the stupid thing out of the window .
Also, it wont recognise my external hard drive so all the back ups that I have made, cant be transferred to my new machine.
The whole point of having two machines was to make sure I was never left in a position like I was the other week with a broken hard drive and no way of runnimg my business but I have been unable to do any work for over two weeks - Apple Support non existant .
So any ideas would be very welcome . Thanks

As no one replied I would just say that I now know that you dont need McAfee security on a MAC - if you do , AIRPORT and your MacBook wont connect using AIRPORT TIME CAPSULE so dont let the store you buy your MAC from sell you MCAFEE - its not needed

Game center wont recognise my apple ID but works with other accounts? On mountain Lion?

Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

Game center wont recognise my apple ID but works with other accounts? On mountain Lion? i tryed to test out the new game center on mountain lion and it will not let me log in no message pops up or forgot your password but when i try other accounts it works fine help please i really want to use game center for mountian lion!

I was told to uninstall then reinstall itunes because "no apple application support"so i did, now wont recognise my iphone and says to uninstall itunes and instll the 64-bit version of itunes so i did again,and again,and again.still wont work pls help me?

I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

My apple ID wont accept any cards as payment, so cant buy or update any apps, any help?

My apple ID wont accept any cards as payment, so cant buy or update any apps, any help?

ive registered with a visa debit but it has stopped accepting it but then i tried to re-enter it, and then i tried a mastercard but that was no better

Iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected

iphone crashed after update it wont recognise itunes when plugged in and do anything besides display itunes needs to be connected please help

"I bought it a couple of weeks ago"
Bought it from where? I ask because given what you have already tried, it would appear that this iPod needs either service or exchanging for another one.
Did you buy this as new from a reputable source?

I have updated my laptop , iphone and ipad to io7 ans 11.1, Itunes wont' recognise either peice of equipment, cannot sync a tjhng, any suggestions?

I have updated my laptop , iphone and ipad to ios7 ans 11.1, Itunes wont' recognise either peice of equipment, cannot sync a thing, any suggestions?

only http://support.apple.com/kb/ts1538. also check the lightning to usb cord.

Itunes/laptop wont recognise Iphone

My itunes/laptop wont recognise my Iphone 4s since Itunes update. It would let me charge and makes a funny noise when I try to connect. I've deleted Itunes and restarted again, rebooted my phone, reset it, and checked my firewall and still nothing..

That just happened to me too which caused my iphone to restore. Now its locked. My apple id isn't working to restore my phone.
Message was edited by: Amanda025

Camileo X400 wont recognise SD card

Similar Messages

Maybe you are looking for