My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help
My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help
Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario
Similar Messages
-
my iphone 3gs is in dfu mode, but when i plug it into my laptop to restore it, my phone won't show up in itunes at all. what do i do???? please help, it would be very much appreciated
Follow the steps here VERY CAREFULLY: http://support.apple.com/kb/HT1808
-
hello, my iphone 4 has just stopped working it has gone blank..i plugged it into my laptop and it the apple sign keeps flashing it wont connect to itunes either :/ HELP!!!
Try the following:
1. Reset
Hold the Sleep and Home button down until you see the Apple logo
2. Restore:
http://support.apple.com/kb/HT1414
3. Recovery:
http://support.apple.com/kb/HT1808 -
my iphone 5 randomly shut off and when I plugged it into my laptop, it says it is in recovery mode. however, i keep getting error 9 when it's attempting to restore. my phone has been off for 24 hours now and i can't get it to successfully restore
Hey p0507!
Here is an article that addresses your error message, and can help you troubleshoot this issue:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
My ipod is not working at all when i plug it into my laptop i get an itunes sign and below that plugin sign also it says new software found however it first asks me to install the software disc which i dont have it with me now can you plz check for the same and reply asap...please thanks.
The link I and Ingo provided included:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
That is more than quicktime and iTunes. Follow all the instruction in the link for removing and reinstalling the Apple software. -
I have 2 concerns, first my Canon 5D MarkII is not showing up in the input source when I download to lightroom. I have to use the card reader to do so. Then there is no File Handling Section listed anywhere. Please Help. Thanks Jim R.
You should find the forum for whatever prdouct your posting concerns and ask for help there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome -
My iphone isn't showing up in itunes when I plug it into my laptop.
Even after I plug my phone in with the cable it doesn't show up in the top corner like it's supposed to, so I can't download any of my new music. I have the iPhone 5s, and I have the newest version of Itunes so it's not that it's outdated.
Hello NicoleAnn219,
Thank you for the details of the issue you are experiencing with your iPhone and iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have iPhone 4 s. It's not being recognized by itunes when I plug it into my laptop
I have itunes already installed on my laptop. But when I plug in my iphone, it's not being recognized either by my laptop or itunes. It can't even be synced by itunes. What should I do?
Hi Octbelle!
I have two articles for you that will help you troubleshoot this issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I had my iphone in my pocket when i was at a pool someone pushed me in as a joke but my iphone did not seem to like the water so i instantly put it in a bag rice, It was in there for about 2 days i took it out plugged it in the wall to try to see if it would work... nothing so then a few days later i wake up and my friend plugged in my iphone just to try to see if it would worked and it kinda does work but i cant get it to go past the apple boot screen and the screen its self works and it seems like its charging when i plug it in the wall but it dosent keep a charge. some one please help! and what are my best options?
Make an appointment at the genius bar. Take your credit card. An out of warranty replacement is $229. It's cooked.
-
??
Nothing should be lost.
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
NOTE:
The 2nd Gen iPod Touch can only go to 4.2.1 -
It keep telling me to reinstall? i dont know why?
maybe this:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
I really can't tell since I do not know what "it" is. Reinstall what? -
I am trying to restore my apple tv through my laptop but i cannot the device to connect. Once a plug it in using a micro usb, the light begins to flash rapidly.
Any suggestions?make sure you're following the steps exactly (unplug all cables, connect micro USB, if using a 3rd gen reconnect power). Connect directly to computer. Try a different cable
-
Hi,my iphone 4has turned off and i cant get it back on.when i plug it into my laptop nothing is happening.Anyone know what is wrong with it?
will.iamb wrote:
... Anyone know what is wrong with it?
No, but try restoring it:
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
I have been on the Apple Support page for several hours now and cannot find my exact circumstance and other suggestions have yet to help me. I purchased a locked ipod touch and when I plug it into my laptop itunes says "Itunes could not connect to ipod because it is locked with a passcode". The guy I bought it from told me the password but I failed to write it down and remember it and he has since moved so I can't find him. I have tried putting it in DFU mode and I can get it there, but then Itunes does not show the pop-up that everyone has said will come up with the alert about an ipod trying to restore itself so I cannot get it to do so. Any suggestions would be greatly appreciated!
Thanks,
AMWhen in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
I was told to uninstall then reinstall itunes because "no apple application support", so i did, now it wont recognise my iphone and says to unistall+install the 64-bit version of itunes so i did, again..and again..still nothing please help me?!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)
Maybe you are looking for
-
Can not unlock the keys in my 8900!
Hello Top lock button does not work for me as apparently created because of corrosion Lbenateime only solution is to lock the buttons to hold down * After that I want to open the buttons I can not open back by clicking on * then press Send Must speci
-
How to Set Up OOTB code in Local System for Telecom and how to open EM
Hi AIA team, I have newly stepped to the vast world of AIA. I am very enthusiastic to learn the same 1. I have Installed Jdev 11.1.1.4 Want to set up OOTB code for Telecom 2. Open an ID to access Oracle SR 3. Want to Open EM and deploy the code there
-
Error message when opening HTM
Using Captivate 6, I published a project that is set up for SCORM 1.2 compliance. When opening the htm file in the browser window, the following error message appears: If I click OK, the project does not display. If I click Cancel, the error message
-
I've noticed that iTunes sorts differently to Windows explorer. In Explorer, "No 1", No 2",...,"No 10", "No 11",...,"No 100",... sort correctly but in iTunes you get 1, 10, 11,..., 100, 101,..2, 20 i.e a strict "alphabetic search not a more sophistca
-
I am still learning how to use my mac and I have put my mail apps into the trash! but when I went back to my mac I forgot about the mail icon and empted my trash ! can I get it back? if so can you tell me how ? thanks