Can a drum pattern created in Ultrabeat be limited to playing only once? Basically creating a single bar.

Found it. The key is shutting down the sequencer in Ultrabeat once you have dragged the pattern to the arrange window.

Similar Messages

Why only once for create recovery media???

When I created recovery discs for my laptop using HP Recovery Manager, I got the message:
You can only create recovery media once for your system. So ensure that you keep it in a safe place
why only once?? what is the problem with creating the same discs again?
what is the difference when creating the recovery discs with the Backup and Restore utils in Windows 7? is it also once only? what is the difference between discs created with Windows 7 versus HP Recovery Manager?

I believe it is due to MS license agreement that only 1 set is allowed. You can of course use a CD/DVD burning program to copy the set you made.
The Recovery set you burn restores the laptop back to factory shipped state. Recovery made with Win 7 utility is an image of the hdd that includes added programs, data ,photos,etc.You also need to burn the System repair disc to use with the backup. You can use it as often as you like.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

ITunes can play only once, then I need to quit in order to play again.

Hi
I have lots of video to play, one day I couldn't play my video without quitting iTunes first. Now whenever I want to play a video, I need to quit iTunes because I didn't quit from after the previous time that I was playing a video clip from my library. I have reinstalled iTunes without effect. How can I solve this problem?
Thanks,
-Jack

This problem has been solved.

Can you loop video forever as a menu background, but audio only once?

I'm wanting to make a menu that has a video background and plays music as soon as the DVD starts up, but I want the music to stop after it plays through twice and the video to continue to loop.
I know I could do this by setting a loop point, but I don't want the user to have to sit and wait the first time the music plays before they can select a button.
Is there a way to do this?

ram8kumar wrote:
There are mainly two workflows to set the looping in a motion menu :
1. If you want to loop the entire video and audio, then there are two ways to do this:
a) In the motion tab of the menus properties, set the loop point to 00:00:00:00 and the loop# to the number of times you want the looping.
b) Go to the Specify Link dialog box to set the End action of the menu, select the menu as the target link and check the 'Set to loop point' checkbox there.
2. If you want to loop the video from a specific point in the time, then in the motion tab of the menu, set the loop point to the exact time of the video you want to stat the looping from and set the loop # to number of times you want the looping.
Thanks for the reply, but I don't think either of your solutions will achieve the result I'm wanting. I want to loop the AUDIO just once (it plays two times after the menu comes up), but I want the VIDEO background to continue to loop forever. I also want the user to be able to make a menu selection at any time, including right when the menu first appears.
If I set a loop point, it makes the menu unusable until that loop point is reached the first time.
I was thinking I could do this with two menus. The first menu would have the audio and video and only loop one time, then its end action would send it to another menu that looks exactly like the first, but only has the video looping on it. The only problem with this solution is that if the user moves their selection to something other than the default button, it will jump back to the default button when it goes to the second menu (or whatever button the "end action" is set to on the first menu).
Would there be a way to have the first menu jump to the identical second menu and stay on whatever button the user currently has highlighted?
Thanks.

How can I stop a sound from looping so it plays only once each time the up key is pressed?

Hi there here is my code, the basis is it is playing a mp3 from my library.
Basically as the topic suggests I only want the sound to play once each time the UP arrow key is pressed. At the moment when you hold the up arrow down the sound keeps triggering and looping and gets really loud and noisy.
Here is my code for my game:
package com.chasegame.components
          import flash.display.MovieClip;
          import flash.display.Stage;
          import flash.events.Event;
          import com.tech.utils.KeyObject;
          import flash.ui.Keyboard;
          import flash.media.Sound;
          import flash.media.SoundChannel;
          public class SpaceShip extends MovieClip
                    private var key:KeyObject;
                    private var speed:Number = 0.3;
                    private var rotateSpeed:Number = 5;
                    private var vx:Number = 0;
                    private var vy:Number = 0;
                    private var friction:Number = 0.95;
                    private var shipSound:roar = new roar();
                    private var shipSoundChannel:SoundChannel = new SoundChannel();
                    public function SpaceShip () : void
                                        key = new KeyObject(stage);
                                        addEventListener(Event.ENTER_FRAME, loop, false, 0, true);
                    public function loop(e:Event) : void
                                        if (key.isDown(Keyboard.UP))
                                                       vy += Math.sin(degreesToRadians(rotation)) * speed;
                                                       vx += Math.cos(degreesToRadians(rotation)) * speed;
                                                       shipSoundChannel = shipSound.play();
                         else
                                                       vy *= friction;
                                                       vx *= friction;
                              if (key.isDown(Keyboard.RIGHT))
                                        rotation += rotateSpeed;
                              else if (key.isDown(Keyboard.LEFT))
                                        rotation -= rotateSpeed;
                              y += vy;
                              x += vx;
                              if (x > stage.stageWidth)
                                        x = 0;
                              else if (x < 0)
                                        x = stage.stageWidth;
                              if (y > stage.stageHeight)
                                        y = 0;
                              else if (y < 0)
                                        y = stage.stageHeight;
                    public function degreesToRadians(degrees:Number) : Number
                              return degrees * Math.PI / 180;

If you want the sound to only play once when the key is pressed then you don't want to have it in the ENTER_FRAME event handler like you have it. It is starting new sounds at the frame rate of your file the way you have it now.
Try having an event listener dedicated to a KeyboardEvent.KEY_DOWN event where you detect when the UP key gets pressed and use that to trigger playing the sound.

Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file? I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types. (Ideally, I would like to do this with a C header file only.) Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on. Unfortunately, this capability has not been created yet. Has anyone done something like this before? Thanks in advance for the help.
Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
Solved!
Go to Solution.

smercurio_fc wrote:
Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
You can try LabVIEW scripting, though be aware that this is not supported by NI.
Wow! Thanks for the quick response! We would use this cluster as a fixed data structure. No need to change the structure during runtime. The cluster would be a cluster of clusters with multiple levels. There would be not pattern as to how deep these levels would go, or how many elements would be in each. Here is the application. I would like to be able to autocode a Simulink model file into a DLL. The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object. I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink). To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically. Right now I can do everything but the auto creation of the cluster. I can manually build the cluster to match the Simulink model bus structure and it runs fine. But this is only for an example model with a small structure. Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!

How can I load pattern matching images into memory?

I discovered this problem by accident when our network went down. I could not run my VI because the .png file used for pattern matching was on a network drive. My concern it the amount of time that is required to read a network file. Is there a way to load the file into memory when the VI is opened?

Brian,
Thank you for contacting National Instruments. For most pattern matching programs, the pattern file should only be read from file once and is then copy to a buffer on the local machine. If you examine your code, or an example program for pattern matching, you should see at least two IMAQ Create VI called somewhere near the front of your code. This VI basically creates a memory location and most likely will be called once for your pattern image and once for the image you are searching.
Unless you are specifically calling a File Dialog VI where you are given a dialog box to open a file or have hard coded the file path so that it is read each iteration of your code, then your pattern file should only need to be called at the beginning of your application, th
us causing only one file read over the network for that image. Therefore your program most likely already loads the image in memory once it is read and should not be accessing the network constantly.
Again, I would recommend taking a look at your code to make sure you are not causing a file access every time and then you should be ready to go. Just in case you do have the network go down, I would recommend keeping a copy of the image locally and, if you are feeling ambitious, you can programmatically have your program read the file locally if the network file returns an error.
Good luck with your application and let us know if we can be of any further assistance.
Regards,
Michael
Applications Engineer
National Instruments

How can I Publish to a Folder just one of the several websites I have created using iWeb?

How can I Publish to a Folder just one of the several websites I have created using iWeb?
it drives me nuts having to emove all the other websites when I want to upload one.
Sparrow

For iWeb, I like to do only one site per domain file. I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
Here are a few of my iWeb sites:
http://www.newcovenant.org
http://www.visionmultimedia.org
http://www.visioncomsolutions.com

Hopefully someone can help.... I have an Iphone 5 and want to create a music video playlist on my phone so then i can play through my apple tv... but when i make a playlist in itunes and try to add it over to my iphone it wont let me sync the playlist...?

Hopefully someone can help.... I have an Iphone 5 and want to create a music video playlist on my phone so then i can play through my apple tv... but when i make a playlist in itunes and try to add it over to my iphone it wont let me sync the playlist...? I have already added the music videos to my iphone so that is not the problem.... i cant seem to figure out how to make a playlist for them... IE: to make the videos play consecutively in the order i want without stopping after each video and gong back to the list.... this is what i have had to resort to make it work....what i want to do....is be able to make a playlist of videos on my iphone 5....take my apple tv to friends houses and with wifi....set up apple tv and play videos at the party and not have to stand by with the remote and find a new video to play stopping the music between the songs/videos....very annoying....and have spent over 4 hours one day and an hour and a half today on the phone today with a sr. advisor with apple and they have no clue.... this seems sooooo simple.... please somebody that really knows how to do this....i will be indebted forever...............
Mike

Thank you for replying. Yes I deleted the old email address..

How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased from the ibook store.

How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.

iBooks only syncs purchased books. Others must be synced in iTunes.

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Hi. I purchased a new ipad mini and my brother already has iphone 4,so how can i avoid sharing the same contents that are on his phone? Will creating an other apple id help us in seperating our facetime and icloud accounts as we share our laptop to sync ?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

How can i add a new language to iOS?? do i have to create a language pack to do it??

how can i add a new language to iOS?? do i have to create a language pack to do it?? PLEASE help...

yes a new language.. do i have to create a language pack?? or any other way.. i need to make my device display in "sinhala" langauge which is used in my country (Sri Lanka) and not yet available in iOS.. is this possible?? seeking help very badly...
PLEASE help...

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Hello dps team, A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again la

Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
Oliver

Hi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

Trouble with calculating fields. Can't select (check) fields. Also can't figure out what's wrong with a division field (percent) that I created. Keep getting the pop up that format of the field doesn't allow blah blah blah... Help!

1. Use the mouse to select the field and then press the space bar.
2. A null string is the same as zero. What is the result for division by zero?

Can a drum pattern created in Ultrabeat be limited to playing only once? Basically creating a single bar.

Similar Messages

Maybe you are looking for